SAC30033601_cover-en_rev04 9/27/06 10:24 AM Page 1 ENGLISH DEUTSCH PLASMA TV MODELS 42PC1RV* 42PC3RV* 42PC3RA* PORTUGUÊS NEDERLANDS Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ESPAÑOL Please read Information Manual included together before reading this manual and operating your set.
ACCESSORIES IN INPU PU TV T T PO W AR C P ER TE XT PI PR TV DV D PIP PI P PR + SIZ VC R E POSTI PIP ON INP UT EX IT LI ST M EN U I/I I Owner's Manual OK VO L Q.V IEW 1 2 5 6 9 FAV INDE Batteries 3 8 0 E RE ? VE AL Owner’s manual PR MU TE 4 7 * TI M Owner’s Manual SL EE P ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product.
CONTENTS ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 CONTENTS INTRODUCTION On Screen Menus Selection and Adjustment . . . . .36 Controls / Connection Options . . . . . . . . . . . . . . . . . . . . . . . .4-10 Remote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . .11-12 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . .12 Setting up TV stations INSTALLATION Stand Installation . . . . . . . . . . . . . .
TV MENU CONTENTS Screen Menu Options Auto Configure (RGB [PC] mode only) . . . . . . . . . . . .66 Manual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Setting the Picture Format . . . . . . . . . . . . . . . . . . . . . .68-69 Selecting Wide VGA/XGA mode . . . . . . . . . . . . . . . . . . .69 Initializing (Reset to original factory settings) . . . . . . . . . . . . . . . .70 APPENDIX Programming the Remote . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTROLS This is the front panel of models 42PC1RV* TVs. ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. INTRODUCTION Front Panel Controls INPUT MENU PR VOL OK Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
This is the front panel of models 42PC3RV*, 42PC3RA* TVs. ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. PROGRAMME Buttons PR INTRODUCTION Front Panel Controls VOLUME Buttons VOL OK OK Button MENU MENU Button INPUT INPUT Button ON/OFF Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
INTRODUCTION CONNECTION OPTION This is the back panel of models 42PC1RV*, 42PC3RV*, 42PC3RA* TVs. Back Connection Panel INTRODUCTION 42PC1RV* only AV IN 4 AUDIO Input Connections are available for listening stereo sound from an external device. R AUDIO L/MONO VIDEO Input Connects the video signal from a video device.
This is the front panel of models 26LC2R*, 26LC3R*, 27LC2R*, 32LC2R*, 32LC25R*, 32LC3R*, 32LE2R*, 37LE2R*, 42LE2R* TVs. ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls INTRODUCTION 26LC2R*, 27LC2R*, 32LC2R*, 32LC25R*, 32LE2R*, 37LE2R*, 42LE2R* R PR PROGRAMME Buttons Remote Control Sensor VOL VOLUME Buttons OK OK Button Power/Standby Indicator • illuminates red in standby mode.
INTRODUCTION CONTROLS This is the front panel of models 32LX2R* TV. ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. INTRODUCTION Front Panel Controls Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
CONTROLS This is the back panel of models 26LC2R*, 26LC3R*, 27LC2R* TVs. R L/MONO AV IN 4 AC IN 1 VIDEO R L/MONO VIDEO AUDIO 26LC3R* 2 4 3 AC IN COMPONENT IN VIDEO AUDIO UDIO 5 6 RGB IN (PC/DTV) HDM IN AV IN 4 AUDIO Input Connections are available for listening stereo sound from an external device. VIDEO Input Connects the video signal from a video device.
INTRODUCTION CONTROLS This is the back panel of models 32LC2R*, 32LC25R*, 32LC3R*, 32LX2R*, 32LE2R*, 37LE2R*, 42LE2R* TVs. L/MONO VIDEO AV IN 4 AV IN 4 AC IN 1 2 AV V1 4 3 5 RGB IN (PC/DTV) COMPONENT IN VIDEO AUDIO UDIO HDM IN REMOTE AUDIO IN CONTROL IN (RGB) VARIABLE (MONO) 7 1 2 3 4 AUDIO UDIO 9 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the set on from standby or off to standby. INPUT TV INPUT TV POWER DVD PIP TEXT PIP PR- SIZE POSTION PIP PR+ PIP INPUT INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / E button and then OK button to select the desired input source (TV, AV1 , AV2, S-Video2 , AV3 , AV4 (except 42PC3RV*, 42PC3RA*), Component , RGB, or HDMI).
SAC30033601_en_1-rev02 8/25/06 9:48 PM Page 12 INTRODUCTION MODE Selects the remote operating modes. INPUT TV INPUT TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 TV POWER INTRODUCTION DVD VCR ARC TEXT PIP PR- PIP SIZE POSTION PIP PR+ 1 PIP INPUT THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference. Right) OK Accepts your selection or displays the current mode.
INSTALLATION STAND INSTALLATION ■ This feature is not available for all models. 1 2 A INSTALLATION 4 3 B C ■ Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1. Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward. ■ Pull the stand out as shown above in Figures 2 ~ 3. After unfolding the stand,please insert and tighten the screws in the holes (B)on the bottom of the stand.
INSTALLATION STAND INSTALLATION (Only 26LC3R*, 32LC2R*, 32LC25R*, 32LE2R*) INSTALLATION 14 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Place the product stand on the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided.
SAC30033601_en_1-rev02 8/28/06 4:01 PM Page 15 BASIC CONNECTION (42PC1RV*, 42PC3RV*, 42PC3RA*) ■ These models have two cable arrangement methods according to the stand type. Stand type 1 Arrange the cables as shown picture. INSTALLATION Stand type 2 1 Hold the C A B L E M A N A G E M E N T with both hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.
INSTALLATION BASIC CONNECTION (Only 26LC2R*, 27LC2R*, 32LC2R*, 32LC25R*, 26LC3R*, 32LC3R*, 32LE2R*, 37LE2R*, 42LE2R*) 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. INSTALLATION 2 Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT 3 Bundle the cables using the supplied twister holder.
BASIC CONNECTION (32LX2R*) Hold the cover with both hands and pull it backward. 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. 3 INSTALLATION 1 Antenna Bundle the cables using the supplied twister holder. SWIVEL STAND (32LX2R*) The TV can be conveniently swiveled on its stand 30° to the left or right to provide the optimum viewing angle.
INSTALLATION ■ ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. GROUNDING Power Supply INSTALLATION Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING ■ ■ Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall.
CONNECTIONS & SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION ■ ■ For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket CONNECTIONS & SETUP ANTENNA IN ANTENNA IN RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten.
VCR SETUP ■ ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna 1 Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the set.
CONNECTIONS & SETUP VCR SETUP When connecting with a Euro Scart AV V 1 HDMI IN AV 2 1 2 Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the set. COMPONENT IN VARIABLE AUDIO OUT VIDEO AUDIO ANTENNA INAV IN 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) S-VIDEO VIDEO ( MONO ) AUDIO 1 3 CONNECTIONS & SETUP Select A V 1 input source with using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT CONNECTIONS 1 V I D E O jacks between TV Connect the A U D I O/V and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) AV V IN 4 R AUDIO L/MONO MONO VIDEO 2 Select AV4 input source with using the I N P U T button on the remote control. (except 42PC3RV*, 42PC3RA*) - If connected to A V I N 3 input, select AV3 input source. 1 Camcorder 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
CONNECTIONS & SETUP DVD SETUP When connecting with a component cable DVD B Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. 1 2 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD.
COMPONENT IN VIDEO AUDIO When connecting with a S-Video cable 1 Connect the S-VIDEO output of the DVD to the S - V I D E O input on the set. 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the set. (R) AUDIO (L) DVD AV 1 2 AV 2 S-VIDEO 1 COMPONENT IN 3 Turn on the DVD player, insert a DVD. 4 Select AV3 input source with using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
CONNECTIONS & SETUP STB (SET-TOP BOX) SETUP When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the digital set-top box to the C O M P O N E N T I N V I D E O jacks on the set. 2 Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the set. Digital Set-top Box (R) AUDIO (L) R 2 1 AV 1 3 B AV 2 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
AUDIO OUT RS-232C IN (CONTROL & SERVICE) When connecting with a D-sub 15 pin cable 1 Connect the RGB output of the digital set-top box to the R G B I N ( P C / D T V ) jack on the set. 2 Connect the audio outputs of the set-top box to the A U D I O I N ( R G B ) jack on the set. (R) AUDIO (L) 1 2 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
CONNECTIONS & SETUP PC SETUP ■ This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable CONNECTIONS & SETUP 1 Connect the TV to the PC with the PC cable. 2 Connect the PC audio putput to the TV’s A U D I O I N ( R G B ) input. 3 Turn on the PC. 2 RGB-PC OUTPUT 4 Select RGB [PC] input source with using the I N P U T button on the remote control.
Supported Display Resolution (RGB[PC] mode) (26LC2R*/ 27LC2R*/ 32LC2R*/ 32LC25R*/ 26LC3R*/ 32LC3R*/ 32LX2R*/ 32LE2R*/ 37LE2R*/ 42LE2R*/ 42PC3RA*) Supported Display Resolution (RGB[PC] mode) (42PC1RV*/ 42PC3RV*) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.5 70.8 640x350 31.5 70.8 720x400 31.5 70.8 720x400 31.5 70.8 640x480 31.5 59.9 640x480 31.5 59.9 848x480 31.5 60.0 800x600 37.9 60.3 852x480 31.5 60.
CONNECTIONS & SETUP TURNING THE TV ON If your TV will be turned on, you will be able to use its features. INPUT TV INPUT TV POWER DVD Turing on the TV ARC TEXT PIP PR- 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, P R D / E button on the TV or press the POWER, T V, INPUT, PR +/-, Number(0~9 9 ) button on the remote control and then the TV will switch on.
On-Screen Menu Language / Country Selection Installation guide menu appears on TV screen when it is turned on for the first time. 1 Press the D / E / F / G button and then, O K button to select your desired language. 2 Press the D / E / F / G button and then, O K button to select your country. * If you want to change Language/ Country selection Press the M E N U button and then use D / E button to select the Special menu. 2 Press the G button and then use D / E button to select Language.
SPECIAL FUNCTIONS PIP (Picture-In-Picture) INPUT TV INPUT TV POWER DVD PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. ARC TEXT PIP PR- PIP function is available in the Component, RGB, HDMI mode. (But, it can’t adjust 480i/576i resolution of Component, RGB, HDMI mode.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
SPECIAL FUNCTIONS TELETEXT TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 2 3 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block.
Special Teletext Functions ? A REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. A SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. Displays the TV picture on the screen while waiting for the new teletext page.
TV MENU ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. The OSD mainly use pictures for the 42PC1RV*, 42PC3RV*, 42PC3RA*. 1 Press the M E N U button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the O K or M E N U button.
Setting up TV stations AUTO PROGRAMME TUNING TEXT PIP PIP PR- Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR +/-. or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK All stations that can be received are stored by this method.
TV MENU Setting up TV stations MANUAL PROGRAMME TUNING TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST MENU EXIT I/II SLEEP OK 1 2 Press the M E N U button and then D / Station menu. Press the G button and then D / E button to select the Q.VIEW VOL E button to select Manual MUTE programme.
FINE TUNING ARC Normally fine tuning is only necessary if reception is poor. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / Station menu. E button to select the Q.VIEW VOL 2 3 Press the G button and then D / programme. E button to select Manual Press the G button and then D / E Press the F / and sound. 5 Press the O K button to store it. 6 Press the E X I T button to return to normal TV viewing.
TV MENU Setting up TV stations ASSIGNING A STATION NAME ARC You can assign a station name with five characters to each programme number. VCR TEXT PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / Station menu. E button to select the Q.VIEW VOL 2 3 Press the G button and then D / programme. Press the G button and then D / PR E button to select Manual MUTE E button to select Name.
PROGRAMME EDIT ARC This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. VCR TEXT PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU I/II EXIT SLEEP OK Q.VIEW 1 Press the M E N U button and then D / Station menu. E VOL button to select the PR MUTE 1 2 3 Press the G button and then D / Programme edit.
TV MENU Setting up TV stations FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. LIST MENU I/II EXIT SLEEP Repeatedly press the F A V button to select stored favourite programmes. OK Q.VIEW VOL 1 2 Press the M E N U button and then D / the Station menu. Press the G button and then D / Favourite programme. E E button to select Press the G button. 4 Press the D / 5 Select a desired programme with the F / G button or NUMBER buttons.
CALLING THE PROGRAMME TABLE TEXT You can check the programmes stored in the memory by displaying the programme table. PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT MENU I/II EXIT SLEEP OK A Displaying programme table Press the L I S T button to display the Programme table menu. Q.VIEW VOL The programme table appears on the screen. PR MUTE One programme table contains ten programmes as shown. 1 2 3 4 5 6 ! NOTE a. You may find some blue programmes.
TV MENU Picture Menu Options PSM (Picture Status Memory) Dynamic Standard Mild Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. User 1/2 Select this option to use the user-defined setting. TEXT PIP PIP PR- SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / the Picture menu.
Picture Adjustment (PSM-User option) Contrast Brightness Colour Sharpness Tint TEXT Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
TV MENU Picture Menu Options CSM (Colour Status Memory) TEXT To initialize values (reset to default settings), select the N o r m a l option. PIP PIP PR- Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 2 3 Press the M E N U button and then D / the Picture menu.
Manual Colour Temperature Control (CSM - User option) TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT To adjust red, green, blue to any colour temperature you prefer. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / the Picture menu. E 1 button to select 2 Press the G button and then D / E button to select CSM. 3 Press the G button and then D / E button to select User.
TV MENU Picture Menu Options FUNCTION TEXT XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. PIP PR- PIP LIST It’s not available to use this function in RGB-PC mode. SIZE POSTION PIP PR+ PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / the Picture menu. E button to select Q.VIEW VOL 2 3 4 Press the G button and then D / Press the G button and then D / Auto or Manual.
ADVANCED-CINEMA TEXT PIP PR- Set up the TV for the best picture appearance for viewing movies. This feature operates only in Analog TV, AV, S-Video and Component 480i/576i mode. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 2 3 Picture 1 Press the M E N U button and then D / E button to select PSM CSM the Picture menu. Advanced Reset 2 Press the G button and then D / E button to select Advanced.
ADVANCED-BLACK LEVEL TEXT When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. PIP PR- This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / the Picture menu. E button to select Q.
RESET TEXT PIP PR- PIP SIZE LIST PIP INPUT MENU EXIT 1 Press the M E N U button and then D / the Picture menu. 2 Press the G button and then D / E E POSTION PIP PR+ I/II SLEEP button to select OK button to select Reset. Q.VIEW VOL PR MUTE 3 Press the G button to initialize the adjusted value. • Returns to the default settings PSM, CSM, XD, Advanced at the factory.
TV MENU Sound Menu Options SSM (Sound Status Memory) TEXT You can select your preferred sound setting; Surround MAX, Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. PIP PR- SSM lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the programme content.
Sound Frequency Adjustment (SSM - User option) TEXT PIP PIP PR- SIZE POSTION PIP PR+ PIP INPUT Adjust the sound equalizer. LIST MENU I/II EXIT SLEEP OK 1 Press the M E N U button and then D / the Sound menu. E button to select Q.VIEW VOL PR MUTE 2 Press the G button and then D / E button to select SSM. Sound button to select User. SSM AVL Balance Speaker 3 Press the G button and then D / 4 Press the G button.
TV MENU Sound Menu Options AVL (Auto Volume Leveler) TEXT AVL automatically keeps on an equal volume level even if you change programmes. PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / E button to select the Sound menu. Q.VIEW VOL 2 Press the G button and then D / 3 Press the G button and then D / 4 Press the E X I T button to return to normal TV viewing. E PR Sound button to select AVL.
BALANCE ADJUSTMENT TEXT You can adjust the sound balance of speaker to the levels you prefer. PIP PR- PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL 1 Press the M E N U button and then D / E button to select the Sound menu. 2 Press the G button and then D / 3 Press the G PR Sound SSM AVL Balance Speaker E button to select Balance. button and then F / G 0 button to make desired adjustment.
TV MENU Sound Menu Options SPEAKER You can adjust the internal speaker status. TEXT PIP PR- In AV, COMPONENT, RGB[PC], RGB[DTV] and HDMI mode, internal speaker audio can be outputted even though there is no video signal. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. OK Sound 1 Press the M E N U button and then D / the Sound menu.
STEREO/DUAL RECEPTION INPUT TV INPUT TV POWER DVD When a programme is selected, the sound information for the station appears after the programme number and station name disappear. ARC PIP PR- DUAL I DUAL II DUAL I+II Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker. VCR TEXT PIP SIZE POSTION PIP PR+ LIST MENU EXIT PIP INPUT I/II SLEEP OK Q.
TV MENU Sound Menu Options NICAM RECEPTION If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I / I I button repeatedly. 1 When NICAM mono is received, you can select NICAM MONO or FM MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
TV MENU Time Menu Options CLOCK SETUP TEXT PIP PIP PR- You must set the time correctly before using on/off time function. If current time setting is erased by a power failure or the set is unplugged, reset the clock. SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / select the Time menu. E button to 1 2 3 4 5 6 7 8 9 Time Press the G button and then D / E button to select Clock.
TV MENU Time Menu Options ON/OFF TIME TEXT The Off time automatically switches the set to standby at the preset time. PIP PR- Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Once the on time/off time is set, these functions operate daily at the preset time. Q.
AUTO SLEEP If set to on and there is no input signal, the TV turns off automatically after 10 minutes. Time Clock Off time On time Auto sleep 1 Press the M E N U button and then D / E button to select the Time menu. DE F G OK MENU 1 2 Press the G button and then D / 3 Press the G button and then D / 4 E button to select Auto sleep. E button to select On or Off.. Time Clock Off time On time Auto sleep G On Off Press the E X I T button to return to normal TV viewing.
TV MENU Special Menu Options CHILD LOCK TEXT The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. PIP PIP PR- This set is programmed to remember which option it was last set to even if you turn the set off. SIZE POSTION PIP PR+ LIST PIP INPUT MENU I/II EXIT SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / the Special menu.
ISM (Image Sticking Minimization) METHOD A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. TEXT PIP PR- PIP SIZE LIST PIP INPUT MENU EXIT It’s not available to use this function in LCD models. POSTION PIP PR+ I/II SLEEP OK White wash White wash removes permanent images from the screen.
TV MENU Special Menu Options LOW POWER TEXT This is the function to reduce the power consumption of the set. PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT It’s not available to use this function in LCD models. LIST MENU EXIT I/II SLEEP OK Q.VIEW VOL PR MUTE 1 Press the M E N U button and then D / E Press the G button and then D / Press the G button and then D / 6 E button to select E button to select Language Country Child lock ISM Method Low Power Set ID Demo On or Off.
XD DEMO TEXT PIP PIP PR- Use it to see the difference between XD Demo on and XD Demo off. SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP It’s not available to use this function in RGB[PC] mode. OK 1 Q.VIEW Press the M E N U button and then use D / E VOL button to MUTE select the Special menu. 2 Press the G button and then use D / PR E 1 2 3 4 5 6 button to select SPECIAL X D D e m o. 3 Press the G button to begin X D D e m o.
TV MENU Screen Menu Options AUTO CONFIGURE (RGB [PC] mode only) TEXT PIP PR- Automatically adjusts picture position and minimizes image shaking. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. PIP SIZE POSTION PIP PR+ LIST PIP INPUT MENU EXIT I/II SLEEP OK Auto configure Q.VIEW VOL This function is for the automatic adjustment of the screen position, clock, and phase.
MANUAL CONFIGURE TEXT If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. PIP PR- PIP LIST To correct the screen size, adjust C l o c k. SIZE POSTION PIP PR+ PIP INPUT MENU EXIT I/II SLEEP This function works in the following mode : RGB[PC], RGB[DTV], COMPONENT (480p/576p/720p/1080i), HDMI (480p/576p/720p/1080i). OK Q.
SETTING THE PICTURE FORMAT You can watch the screen in various picture formats; S p e c t a c l e, F u l l, O r i g i n a l, 4 : 3, 1 6 : 9, 1 4 : 9 and Z o o m. INPUT TV INPUT If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. TEXT TV POWER DVD ARC PIP PR- VCR PIP SIZE POSTION PIP PR+ PIP INPUT There might be uncomfortable in full mode. Then change into other mode.
• Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped. • Zoom2 Choose Z o o m 2 when you want the picture to be altered, both horizontally extended and vertically cropped. The pic ture taking a halfway trade off between alteration and screen coverage. 4 ! NOTE G You can only select 4 : 3, 1 6 : 9 (Wide) in Component, RGB, HDMI mode only.
TV MENU Screen Menu Options INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) TEXT PIP PR- PIP SIZE POSTION PIP PR+ PIP INPUT This function operates in current mode. To initialize the adjusted value LIST MENU EXIT I/II SLEEP OK 1 Press the M E N U button and then D / the Screen menu. E button to select Q.VIEW VOL PR MUTE 2 3 Press the G button and then D / Reset. Ebutton to select 1 2 3 4 5 6 7 8 9 Screen Press the G button. Auto config. Manual config.
APPENDIX PROGRAMMING THE REMOTE The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode Test your remote control.
APPENDIX VCRs Brand AIWA AKAI APPENDIX 72 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Brand MAGNAVOX 031 067
TROUBLESHOOTING CHECKLIST The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Correct remote operating mode set: TV, VCR etc.? ■ Install new batteries. ■ The remote control doesn’t work Power is suddenly turned off Is the sleep timer set? ■ Check the power control settings. Power interrupted ■ No broadcast on station tuned with Auto off activated.
APPENDIX TROUBLESHOOTING CHECKLIST The audio function does not work. Press the V O L + / - ( o r V o l u m e ) button. Sound muted? Press M U T E button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers ■ ■ Adjust Balance in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS APPENDIX 76 26LC2R-ZJ 26LC2RB-ZJ 26LC2RA-ZJ 26LC3R-ZJ 27LC2R-ZJ 680.0 x 550.0 x 235.0 mm 26.8 x 21.7 x 9.3 inches 686.0 x 550.0 x 235.0 mm 27.0 x 21.7 x 9.3 inches without stand 681.0 x 490.8 x 119.0 mm 26.8 x 19.3 x 4.6 inches 680.0x 436.6 x 119.4 mm 26.8 x 17.2 x 4.7 inches 686.0 x 493.5 x 119.4 mm 27.0 x 19.4 x 4.7 inches with stand without stand 18.5 kg / 40.8 lbs 15.2 kg / 33.5 lbs 12.4 kg / 27.3 lbs 11.5 kg / 25.3 lbs 14.5 kg / 32.0 lbs 11.
PRODUCT SPECIFICATIONS 32LC2R* MODELS 32LC3R-ZJ 32LX2R-ZJ 935.0 x 570.0 x 244.0 mm 917.5 x 614.3 x 287.5 mm 36.1 x 24.2 x 11.3 inches 36.8 x 22.4 x 9.6 inches without stand 811.0 x 566.8 x 123.5 mm 31.9 x 22.3 x 4.9 inches 923.0 x 522.0 x 124.0 mm 36.4 x 20.6 x 4.9 inches 917.5 x 522.0 x 124.0 mm 36.1 x 20.6 x 4.9 inches with stand without stand 21.9 kg / 48.2 lbs 18.5 kg / 40.8 lbs 19.8 kg / 43.7 lbs 17.9 kg / 39.5 lbs 25.2 kg / 55.6 lbs 17.9 kg / 39.5 lbs AC100-240V~50/60Hz 1.
APPENDIX PRODUCT SPECIFICATIONS MODELS APPENDIX 78 32LE2R-ZJ 37LE2R-ZJ 42LE2R-ZJ 943.9 x 286.0 x 734.6 mm 1054.0 x 813.5 x286.0 mm 41.5 x 32.0x 11.2 inches 37.2 x 11.3 x 28.9 inches without stand 811.0 x 566.8 x 123.5 mm 31.9 x 22.3 x 4.9 inches 943.9 x 152.2 x 695.5 mm 1054.0 x 746.0 x 136.8mm 41.5 x 29.3 x 5.3 inches 37.2 x 6.0 x 27.4 inches with stand without stand 21.9 kg / 48.2 lbs 18.5 kg / 40.8 lbs 28.6 kg/63.0 lbs 24.0 kg /52.9 lbs AC100-240V~50/60Hz 1.5A 150W AC100-240V~50/60Hz 2.
PRODUCT SPECIFICATIONS MODELS 42PC1RV-ZJ 42PC1RVA-ZJ 42PC3RV-ZJ 42PC3RA-ZJ 1129.0 x 748.5 x 333.6 mm 44.4 x 29.5 x 13.1 inches 1129.0 x 748.5 x 333.6 mm 44.4 x 29.5 x 13.1 inches without stand 1129.0 x 695.0 x 103.7 mm 44.4 x 27.4 x 4.1 inches 1129.0 x 695.0 x 103.7 mm 44.4 x 27.4 x 4.1 inches 1129.0 x 695.0 x 103.7 mm 44.4 x 27.4 x 4.1 inches with stand without stand 27.7 kg / 61.1 lbs 24.2 kg / 53.4 lbs 31.5 kg / 69.4 lbs 24.2 kg / 53.3 lbs 31.5 kg / 69.4 lbs 24.2 kg / 53.
SAC30033601_cover-en_rev02 8/25/06 8:57 PM Page 1 ENGLISH DEUTSCH PLASMA TV MODELS 42PC1RV* 42PC3RV* 42PC3RA* ITALIANO ESPAÑOL LCD TV MODELS 26LC2R* 27LC2R* 32LC2R* 32LC25R* 32LC3R* 32LX2R* 37LE2R* 42LE2R* FRANÇAIS LCD TV PLASMA TV OWNER’S MANUAL Please read Information Manual included together before reading this manual and operating your set. PORTUGUÊS Retain it for future reference. Record model number and serial number of the set.
APPENDIX ENGLISH EXTERNAL CONTROL DEVICE SETUP RS-232C Setup DEUTSCH Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. RS-232C connection cables are not supplied with the TV.
APPENDIX RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations(Not standard) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID - Use this function to specify a set ID number. - Refer to ‘Real Data Mapping 1’. See page 6.
Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 01. Power k a 0~1 02. Aspect Ratio k c * 03. Screen Mute k d 0~1 17. Red Adjustment 04. Volume Mute k e 0~1 18. Green Adjustment DATA (Hexadecimal) 15. Balance k t 0 ~ 64 16. Colour Temperature k u 0~3 k v 0 ~ 3C(or 50) k w 0 ~ 3C(or 50) 05. Volume Control k f 0 ~ 64 19. Blue Adjustment k $ 0 ~ 3C(or 50) 06. Contrast k g 0 ~ 64 20. Abnormal Status k z 0~a 07.
APPENDIX 0 5 . Volume Control (Command2:f) 0 1 . Power (Command2:a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show Power On/Off. To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping 1 ’.
10. Sharpness (Command2:k) 15. Balance (Command2:t) To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. To adjust balance. You can also adjust balance in the SOUND menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 Data Min: 0 ~ Max: 64 Refer to ‘Real data mapping 1’. See page 6 Refer to ‘Real data mapping 1’. See page 6 Acknowledgement [k][ ][Set ID][ ][OK][Data][x] 11.
APPENDIX 20. Abnormal State (Command2:z) To recognize an abnormal state. This feature is not available for all models. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] 24 . Orbiter Pixel Setting (Command1:j, Command2:s)(Option) To adjust pixel number in orbiter function. This feature is not available for all models. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data FF: Read Data Min: 1 ~ Max: 3 Acknowledgement [z][ ][Set ID][ ][OK][Data][x] Refer to ‘Real data mapping 1’.
2 7 . S e n d I R C o d e (Command1:m, Command2:c) 29. Input select (Command1:x, Command2:y) To send IR remote key code. To adjust input source for sub picture in PIP mode Transmission [m][c][ ][Set ID][ ][Data][Cr] Transmission [x][y][ ][Set ID][ ][Data][Cr] Data: Structure Data: Key code - Refer to page 9 Acknowledgement [c][ ][Set ID][ ][OK][Data][x] MSB 0 28.
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
REMOTE CONTROL IR CODES Code (Hexa) Function Note Code Function (Hexa) Note 0F TV R/C Button 72 RED R/C Button 0B INPUT R/C Button 71 GREEN R/C Button 08 POWER R/C Button (Power On/Off) 63 YELLOW R/C Button C4 POWER ON Discrete IR Code (Only Power On) 61 BLUE R/C Button C5 POWER OFF Discrete IR Code (Only Power OFF) 02 VOL + R/C Button 60 PIP R/C Button 03 VOL - R/C Button 0E SLEEP R/C Button 00 PR + R/C Button 20 TEXT R/C Button 01 PR - R/C Button 0A I