User guide

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Detaching the Stand Base
1
Place the screen face down.
y
To protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
Installing on to a Table
1
Lift the monitor and place it on the table in an
upright position.
Place at least 10 cm away from the wall to
ensure sufficient ventilation.
2
Connect the Power Cord to a wall outlet.
3
Press the (Power) button on the bottom of
the monitor to turn it on.
y
Disconnect the power cord first, and then
move or install the monitor. There is risk of
electric shock.
CAUTION
y
The components in the illustrations may differ
from the actual product.
y
Do not carry the monitor upside down, as this
may cause it to fall off its stand and result in
damage or injury.
y
To avoid damaging the screen when lifting
or moving the monitor, only hold the stand
or the plastic cover. This avoids putting
unnecessary pressure on the screen.
CAUTION
2
BodyTurn the screws on the Stand Base to the
left to detach the Stand Base from the Stand
Body.
10 cm
10 cm
10 cm
10 cm