ENGLISH OWNER’S MANUAL IPS LED MONITOR Please read this manual carefully before operating your set and retain it for future reference. IPS LED MONITOR MODEL 23MP75HM 27MP75HM www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 24 SPECIFICATIONS 3 Unpacking 24 23MP75HM 4 Parts and buttons 25 27MP75HM 5 Setting up the Monitor set 26 Preset Modes (Resolution) 5 - Attaching the Stand Base 26 Indicator 5 - Detaching the Stand Base 6 - Mounting on a table 27 PROPER POSTURE 6 - Using the cable holder 27 Proper posture for using the Monitor set.
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.11) Connection panel (See p.
ASSEMBLING AND PREPARING Detaching the Stand Base Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 1 Use a screwdriver to remove the two screws from the Stand Body, and then pull it out. 2 Use a screwdriver to remove the one screw. 3 Pull out the Stand Base.
ASSEMBLING AND PREPARING Mounting on a table 3 Press (Power) button on the bottom switch ENGLISH ENG panel to turn the power on. 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. 10 cm 10 cm 10 cm 10 cm Using the cable holder 1 Fix the cable holder to stand body.
ASSEMBLING AND PREPARING NOTE WARNING 27MP75HM Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Do not touch or press the screen when adjusting the angle of the monitor. Front Rear Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com .
ASSEMBLING AND PREPARING Mounting on a wall Model ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
USING THE MONITOR SET 9 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set.
USING THE MONITOR SET Peripheral device connection ENGLISH ENG Connect peripheral devices to the monitor using headphone ports. Self Image Setting Function Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) NOTE NOTE Peripheral devices are sold separately. yy Cables with angled plugs may have clearyy ance issues, use straight plugs when possible.
CUSTOMIZING SETTINGS 11 CUSTOMIZING SETTINGS 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Description Accesses the main menus.(See p.12) OSD Locked/OSD Unlocked This function allow you to lock the current control settings, so that they cannot be inadvertently changed.
CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "Next Menu" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 13 Picture ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Color ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 15 Display ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Others ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 17 READER Setting ENG ENGLISH 1 Press READER button on the bottom of the Monitor set to display the Reader Mode OSD. 2 Set the options by pressing the ◄ buttons. Each option is explained below. Description Reader Mode Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Reader 2 It is a mode that the screen is adjusted to the best for the cartoon.
CUSTOMIZING SETTINGS FUNC. Setting ENGLISH ENG SUPER ENERGY SAVING 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to SUPER ENERGY SAVING by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► or ▼buttons. 4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 19 ENG ENGLISH Picture Mode 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select Picture Mode by pressing the ► button. 3 Enter to Picture Mode by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow( )button. Each option is explained below.
CUSTOMIZING SETTINGS SUPER RESOLUTION + ENGLISH ENG 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER RESOLUTION+ by pressing the ► button. 3 Enter to SUPER RESOLUTION+ by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow( )button. Each option is explained below. FUNC.
CUSTOMIZING SETTINGS 21 * Before using below functions, please install DUAL SMART SOLUTION programme. ENG ENGLISH DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY by pressing the ► button. 3 Enter to DUAL DISPLAY by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator White? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? yy Check and see if the power cord is connected properly to the power outlet. yy Press the Power button.
TROUBLESHOOTING 23 CAUTION Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 23MP75HM Display Sync Input Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 58.4 cm Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB) 56Hz to 61Hz (HDMI) Separate Sync. Digital Input Form Video Input Signal Input Input Form Resolution Max Recommend 15 pin D-SUB Connector HDMI Connector RGB Analog (0.
SPECIFICATIONS 25 27MP75HM Display Sync Input Screen Type 68.5 cm (27 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 68.5 cm Pixel Pitch 0.3114 mm x 0.3114 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB) 56Hz to 61Hz (HDMI) Separate Sync. Digital Input Form Video Input Signal Input Input Form Resolution Max Recommend 15 pin D-SUB Connector HDMI Connector RGB Analog (0.
SPECIFICATIONS Preset Modes (Resolution) ENGLISH ENG D-SUB Timing Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
PROPER POSTURE 27 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Declaration of Conformity Trade Name: LG Model : 23MP75HMB,27MP75HMB Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.
