Colour Television OWNER’S MANUAL BZ03 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Contents Installation.........................................................2 Connection of external equipment..................3 Location and function of controls...................4 Basic operation.................................................7 On screen menus..............................................7 Setting up TV stations......................................8 Picture adjustment..........................................11 Sound adjustment...........................................
Connection of external equipment You can connect additional equipment, such as VCRs, camcorders etc. to your set. What is shown here may be somewhat different handset to select AV 1 The VCR playback picture appears on the screen. from your set. You can also record programmes received by the TV on video tape. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket on the back of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. 1 11 13 14 Remote control handset 10 2 1 2 3 4 5 6 7 8 9 0 3 Before you use the remote control handset, please install the batteries. See the next page. 1. POWER switches the set on from standby or off to standby. 8 3. MENU selects a menu. PR 4 VOL OK 2.
Location and function of controls 8. FAVOURITE selects a favorite programme. 9. EYE/ (option) switches the eye function on or off. 1 11 13 10 * Q.VIEW 14 10. MUTE switches the sound on or off. 11. TV/AV selects TV or AV mode. switches the set on from standby. exits the Teletext mode. LIST 2 1 2 3 4 5 6 7 8 9 3 0 8 12. I/II/ * selects the language during dual language broadcast. selects the sound output (option). 13. Q.VIEW (or YELLOW) returns to the previously viewed programme.
Location and function of controls Front panel 29FU1 series 4 OK 1 5 2 3 PR 1. MAIN POWER (ON/OFF) switches the set on or off. 2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. 3. REMOTE CONTROL SENSOR Note : Only use the supplied remote control handset. (When you use others, they will not be able to function.) 4. MENU selects a menu. 5. OK accepts your selection or displays the current mode. F / G (Volume Down/Up) adjusts the volume.
Basic operation On and off Q.VIEW (or YELLOW) 1. Press the main power button to switch the set on. 2. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button again to switch the set off. Press the Q.View (or YELLOW) button to view the last programme you were watching.
Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Note : In some models up to 200 TV stations can be stored. Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1.
Setting up TV stations Assigning a station name 1. Repeat the ‘Manual programme tuning’ steps 1 to 3. 2. Press the D / E button to select Name. 3. Press the G button on the Name pull-down menu. 4. Press the D button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the E button you can select in the opposite direction. 5. Select the position by pressing the F / G button and then take your choice of the second character, and so on. 6. Press the OK button. 7.
Setting up TV stations Favourite programme This function lets you select your favourite programmes directly. 1. Press the MENU button to select the Station menu. 2. Press the G button and then D / E button to select Favourite programme. 3. Press the G button to display the Favourite programme menu. Favourite programme AutoOprogramme { ManualOprogramme { { ProgrammeOedit FavouriteOprogramme { 56n 56n Ca Ca0 05 5 }{O0_9O()OOKOMENU 4. Press the D / E button to select -- -----. 5.
Picture adjustment Note: Picture menu options are not available for the RGB input source. PSM (Picture Status Memory) 1. Press the MENU button and then D / E button to select the Picture menu. 2. Press the G button to select PSM. 3. Press the G button and then D / E button to select a picture setting on the PSM pull-down menu. Picture PSM XD Contrast Brightness Colour Sharpness { { { { { { Dynamic Dynamic Standard Mild Game User ()O}OOKOMENU 4. Press the OK or F button. 5.
Sound adjustment SSM (Sound Status Memory) You can select your preferred sound setting; Flat, Music, Movie or Sports and you can also adjust the sound frequency of equalizer. 1. Press the MENU button and then D / E button to select the Sound menu. 2. Press the G button to select SSM. 3. Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast Mono Stereo Dual On Screen Display MONO STEREO DUAL I Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II/ button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II/ button twice again.
Other functions TV and AV modes Inputs can be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the ‘Connection of external equipment’ section. 1. Press the MENU button and then D / E button to select the Special menu. 2. Press the G button and then D / E button to select Input. 3.
Other functions Sleep timer You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses. Repeatedly press the SLEEP button to select the number of minutes. The display r- - - will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. b.
Teletext (option) Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. this page with the same coloured button. 4. The three other coloured buttons are programmed in the same way. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
Teletext (option) Special teletext functions REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. UPDATE Displays the TV picture on the screen while waiting for the new teletext page.
Note 18
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adj