Colour Television OWNER’S MANUAL BZ03 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Contents Installation ........................................................2 Connection of external equipment.................3 Location and function of controls .................4 Basic operation...............................................8 On screen menus ...........................................8 Setting up TV stations ................................... 9 Picture adjustment ........................................ 12 Audio adjustment ..........................................13 Time setting ...
Connection of external equipment You can connect additional equipment, such as VCRs, camcorders etc. to your set. What is shown here may be somewhat different from your set. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket on the back of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel on the programme number 0 using the ‘Manual programme tuning’ section. 4. Select the programme number where the VCR channel is stored. 5.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset POWER Before you use the remote control handset, please install the batteries. See the next page. MUTE 1 1 2 3 4 5 6 7 8 9 ARC 0 TV/AV 12 1. POWER switches the set on from standby or off to standby. 2. NUMBER BUTTONS Switches the set on from standby or directly select a number.
Location and function of controls 14. MENU selects a menu. 15. LIST displays the programme table. 16. SSM (Sound Status Memory) recalls your preferred sound setting. 17. EYE/ (option) switches the eye function on or off. * POWER 18. Q.VIEW returns to the previously viewed programme. 12 1 19. INDEX/ (option) switches FRONT DISPLAY on or off. 2 20. FAVOURITE selects a favourite programme.
Location and function of controls Front panel 29FX6 series 29FS2 series 5 3 2 4 ON/OFF 1 1 25 3 4 29FX5 series 29FS4 series 1 2 5 3 3 29FX4 series MENU 4 OK 4 VOL PR 1 ON/OFF 25 2 5 1 3 4 29FC2 series 29FS6 series 3 1 2 5 3 4 29FA5 series 4 MENU 1 2 5 1 3 VOL PR 4 OK 2 5 29FU3 series 29FU1 series 4 OK 5 1 6 PR 2 3 1 2 3
Location and function of controls 29FB5 series MENU 1. MAIN POWER (ON/OFF) switches the set on or off. OK VOL VIDEO PR L AUDIO R ON/OFF 2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. AV IN3 1 2 5 3 29FC1 series 6 4 MENU 1 2 5 OK 3 3. MENU selects a menu. PR VOL 4. OK accepts your selection or displays the current mode. F / G (Volume Down/Up) adjusts the volume. adjusts menu settings.
Basic operation On and off Q.VIEW 1. Press the main power button to switch the set on. 2. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button again to switch the set off. Press the Q.View button to view the last programme you were watching.
Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Note : In some models up to 200 TV stations can be stored. Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1.
Setting up TV stations Fine tuning Normally fine tuning is only necessary if recetion is poor. 1 2. 3. 4. Repeat the ‘Manual Tuning’ steps 1 to 3. Press the D / E button to select Fine. Press the G button. Press the F / G button to fine tune for the best picture and sound on the Fine pull-down menu. 5. Press the OK button. 6. Repeatedly press the MENU button to return to normal TV viewing. The finely tuned programme will be indicated by yellow number during programme selection. Assigning a station name 1.
Setting up TV stations Favourite programme This function lets you select your favourite programmes directly. 1. Press the MENU button to select the Set up menu. 2. Press the G button and then D / E button to select Favourite Programme. 3. Press the G button to display the Favourite P rogramme menu. Setup AutoOTuning ManualOTuning ProgrammeOedit FavouriteOProgrammeO{ 41n Ca 4 1 Selecting a programme in the programme list Select a programme with the D / E or F / G button. Then press the OK button.
Picture adjustment Note: Picture menu options are not available for the RGB input source. Picture Mode 4. Press the OK or F button. 5. Repeatedly press the MENU button to return to normal TV viewing. Note : 1. Press the MENU button and then D / E button to select the Picture menu. 2. Press the G button to select Picture Mode. 3. Press the G button and then D / E button to select Dynamic,Standard, Mild or Game. 4. Press the OK or F button. Only in User mode,XD could be chosen on/off.
Picture adjustment Picture adjustment You can adjust contrast,brightness,colour,sharpness to the levels you prefer. 1. Repeat the ‘Picture Mode’ steps 1 to 2. 2. Press the G button and then D / E button to select User. 3. Press the G button and then D / E button to select Contrast Brightness, Colour, Sharpness or Tint. 4. Press the G button and then D / E button to make appropriate adjustments on the each sub menu. 5. Press the OK button to store it for the picture User. 6.
Audio adjustment X-WAVE (Wireless Sound) (option) You can also listen to the sound through the FM receiver. 1. Press the MENU button and then D / E button to select the Audio menu. 2. Press the G button and then D / E button to select X-WAVE. 3. Press the G button and then D / E button to select Set Frequency. 4. Press the G button to tune in a frequency on the X-wave menu. 5. Use the number 0 to 9 or press the F / G button to match the TV’s frequency and the FM receiver’s. Note: a.
Time Setting Time Clockoooooooooo{ Clock OffoTime OnoTime AutooSleep -i-o:o-i- ()O}{OOKOMENU Setting the clock 1. Press the MENU button and then D / E button to select the Time menu. 2. Press the G button to select Clock. 3. Press the G button and then D / E button to adjust the hour. 4. Press the G button and then D / E button to adjust the minute. 5. Press the OK button. 6. Repeatedly press the MENU button to return to normal TV viewing.
Option functions Country Selection installation guide menu appears on TV screen when it is turned on for the first time. 1. Press the MENU button and then D / E button to select the Option menu. 2. Press the G button and then D / E button to select Country. 3. Press the G button and then D / E button to select your correct local country. 4. Press the OK button . 5. Repeatedly press the MENU button to return to normal TV viewing.
Teletext (option) Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
Teletext (option) Special teletext functions REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. UPDATE Displays the TV picture on the screen while waiting for the new teletext page.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adj