User guide

19
ENG
ENGLISH
ASSEMBLING AND PREPARING

Oncethepinisremoved,itisnotnecessary
tore-insertittoadjusttheheight.
Adjusting the stand height
2
 Removethe
tape attached to the bottom
back of the stand body and then pull out the
locking pin while pressing the head down-
ward.
3
 Theheightcanbeadjustedupto
120.0 mm
.

Donotputyourfingersor
handbetweenthescreen
andthebase(chassis)when
adjustingthescreen'sheight.
Tape
Locking Pin
Stand Body
CAUTION
WARNING
1
 Standthemonitorassembledwiththestand
baseinanuprightposition
29UB55
130.0mm
25UB55
29UB55
25UB55
120.0mm
3
 Pressthe (Power)buttononthebottomof
themonitortoturniton.

Unplugthepowercordpriortomovingor
installingthemonitor.Thereisriskofelectric
shock.
CAUTION
29UM55
29UB55
or
or
Theheightcanbeadjustedupto
130.0 mm
.