OWNER’S MANUAL * LED TV * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 29UT55V www.lg.
TABLE OF CONTENTS ENGLISH TABLE OF CONTENTS 3 LICENSES 35 REMOTE CONTROL 3 OPEN SOURCE SOFTWARE NOTICE 36 INSTALLING LG MONITOR SOFTWARE 4 ASSEMBLING AND PREPARING 38 CUSTOMIZING SETTINGS 4 6 6 8 10 10 11 13 14 15 Unpacking Parts and buttons - Using the Joystick button Lifting and moving the TV Setting up the TV - Attaching the Stand - Detaching the Stand - Mounting on a table - Tidying cables Mounting on a wall 38 38 55 Accessing the Main Menus - TV, Component, AV - HDMI1, HDMI2, Displa
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ASSEMBLING AND PREPARING ENGLISH NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 5 ENGLISH Remote control, Batteries (AAA) (See p. 35) CD (Owner's Manual / Software) / Guides / Cards Stand Body (See p.10,11) Stand Base (See p.11) Stand Screws 2 EA, M4 x L10 (See p.10,12) Stand Screw cover (See p.10,12) Power Cord (See p. 13) AC-DC Adapter (See p. 13) Cable Holder (See p. 14) HDMI Cable (See p.
ASSEMBLING AND PREPARING ENGLISH Parts and buttons Screen Speakers Joystick button (*This button is located below the TV screen.) Remote control sensor Power Indicator Red : When the power is turned off Off : When the power is turned on Amber : When the power is in power saving mode NOTE yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING 7 Adjusting the Menu When the TV is turned on, press the joystick button one time. You can adjust the Menu items ( , , 입력 입력 입력 Input 메뉴 Menu Exit PIP 메뉴메뉴 나가기 나가기 나가기 Monitor off 메뉴 화면 꺼짐 ) moving the joystick button up, down, left or right. Input Changes the input source. PIP PIP Turns the PIP mode on or off. Monitor Off Turns the power off. Menu Configures the settings. Exit Exits the OSD menu.
ASSEMBLING AND PREPARING ENGLISH Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION yy When transporting the TV, do not expose the TV to jolts or excessive vibration. yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
ASSEMBLING AND PREPARING ENGLISH CAUTION yy Do not carry the TV upside-down as this may cause it to fall off its stand, resulting in damage or injury. yy Do not carry the TV upside-down by holding the stand body as this may cause it to fall off, resulting in damage or injury. yy The illustration shows a general example of installation and may look different from the actual product.
ASSEMBLING AND PREPARING ENGLISH Setting up the TV Attaching the Stand 1 2 Turn the screw to the right into the back of the stand body and close the Stand Screw Cover. Check the orientation (front and rear) of the stand base and mount the Stand Body to the Stand Hinge as shown in the figure. Stand Body Stand Hinge CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING Fix the Stand Base to the Stand Body and turn the screws on the Stand Base to the right. 1 Turn the screw to the left, and then pull out the Stand Base from the Stand Body.
ASSEMBLING AND PREPARING ENGLISH 2 3 Open the Stand Screw Cover on the back of the Stand Body and turn the screws on the stand body to the left. Detach the Stand Body from the TV. Stand Body Stand Hinge CAUTION yy When detaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Stand Screw Cover CAUTION yy To remove the stand screw cover, use a screwdriver, coin or similar object.
ASSEMBLING AND PREPARING Lift and tilt the TV into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm Tilt from -5 to +20 degrees up or down to adjust the angle of the TV to suit your view. -5 20 10 cm 10 cm Front Rear : WARNING 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. DC-IN (19V ) CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING ENGLISH CAUTION yy Be careful not to touch or press the screen area when adjusting the angle of the TV. Tidying cables 1 2 Gather and bind the cables with the supplied cable holder. Place the cable on the hook located on the stand base. yy Be careful not to press the screen with your fingers or palm.
ASSEMBLING AND PREPARING Mounting on a wall A 10 cm 10 cm 10 cm 10 cm For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. If you intend to mount the TV to a wall, attach Wall mounting interface (optional parts) to the back of the TV.
ASSEMBLING AND PREPARING ENGLISH Using the Kensington security system CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty.
WATCHING TV 17 ENGLISH WATCHING TV Turning the TV on for the first time When you access the TV for the first time, the Factory Reset screen appears. Select a language and customize the basic settings. 1 2 3 Connect the power cord to a power outlet. Standby Light is turned on. Set the joystick buttons on the TV or press the power, TV/PC, INPUT, number buttons on the remote control to turn the TV on. The Standby Light is turned off. The Factory Reset screen appears if you access the TV for the first time.
WATCHING TV ENGLISH NOTE yy For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. yy When France is selected for Country, the initial password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’. yy To display images in the best quality for your home environment, select Home Use mode. yy Store Demo mode is suitable for the retail environment.
WATCHING TV TV/ 19 RAD INPUT AD SUBTITLE 1 4 7 Programme Guide 2 5 8 0 LIST Press the GUIDE button on the remote control while you are watching TV. 3 6 9 ENGLISH TV display (5:9 OSD) TV/PC Q.VIEW FAV -- On the right-hand side (5:9 OSD) of the TV screen, the details of programme you are currently watching and the programme organization information are displayed. P GUIDE MUTE -- DTV channels are marked only in ‘Other Channels’ list. INFO TEXT T.OPT SETTINGS Q.
GUIDE P MUTE 20 WATCHING TV ENGLISH PIP function Press the PIP button on the remote control while you are watching HDMI1, 2, DisplayPort. - Configured Sub screen is saved until change the Main screen. INFO TEXT T.OPT SETTINGS Q.MENU PIP SETTINGS EXIT PIP REC/ TV/ RAD Sub INPUT Off AD SUBTITLE TV/PC TV 1 2Component 3 HDMI2 4 5DisplayPort 6 7 PIP Preview 8 9 LIST 0 Q.
WATCHING TV Description 1 PIP Map Sub Current input PIP Sub HDMI1 HDMI2 Display Port TV Component AV1 AV2 HDMI1 X O O O O X X HDMI2 O X O O O X X DisplayPort O O X O O X X TV X X X X X X X Component X X X X X X X AV1 X X X X X X X AV2 X X X X X X X Size Sets the size of the PIP Sub window. (Small / Medium / Large / Balanced) Position Sets the position of the PIP Sub window.
MAKING CONNECTIONS ENGLISH MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, camcorders or cameras, gaming devices, and other external devices.
MAKING CONNECTIONS ENGLISH Satellite connection Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
MAKING CONNECTIONS Connect a HD receiver, DVD Player, VCR or Gaming device to the TV and select an appropriate input mode. HDMI connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration. NOTE yy HDMI cable to the HDMI input and a digital broadcast receiver, connect the HDMI output. Video, with sound output.
MAKING CONNECTIONS Transmits the analogue video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use a component cable. NOTE yy If cables are installed incorrectly, image is displayed as black-and-white or abnormal colour. yy Check to ensure each cable is matched with the corresponding colour connection.
MAKING CONNECTIONS ENGLISH Composite connection Transmits the analogue video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown on the following illustration. NOTE yy Check to ensure each cable is matched with the corresponding colour connection. yy Press the INPUT button on the remote control to select AV2.
MAKING CONNECTIONS 27 Transmits the video and audio signals from an external device to the TV. Connect the external device and the TV with the Euro Scart cable as shown on the following illustration. Output Type AV1 (TV Out1) Current input mode Digital TV Digital TV Analogue TV Analogue TV Component, AV, HDMI Analogue TV 1 TV Out : Outputs Analogue TV or Digital TV signals. NOTE yy Any Euro cable used must be shielded for signal quality.
MAKING CONNECTIONS ENGLISH Headphone connection Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as shown on the following illustration. NOTE yy yy yy yy AUDIO menu items are disabled when connecting a headphone. Headphone impedance: 16 Max audio output of headphone: 2.5 mW to 5.5 mW Headphone jack size: 0.
MAKING CONNECTIONS 29 Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV and select input as USB to use various multimedia files. NOTE yy It may not work when USB 3.0 devices are connected. USB / HDD1 (Not Provided) (Not Provided) 1 The USB port provides 0.5 A electric current. If you need more electric current in the case of an HDD, use a separate power adaptor.
MAKING CONNECTIONS View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. NOTE ▲ PCMCIA ▲ CARD SLOT yy Check if the CI module is inserted into the PCMCIA CARD SLOT in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA CARD SLOT. yy If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Antenna/Cable/Satellite Service Operator.
MAKING CONNECTIONS (Only UK) Connect the TV to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual. CAUTION yy Do not connect a modular phone cable to the LAN port.
MAKING CONNECTIONS ENGLISH Connecting to a PC Your TV supports the Plug & Play* feature. * Plug & Play: The function when a PC recognizes a connected device and requires no driver to be installed. NOTE yy yy yy yy It is recommended to use an TV with the HDMI connection for the best image quality. If you turn the TV on when the set is cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear on the screen. This is normal.
MAKING CONNECTIONS 33 Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with an HDMI cable as shown in the following illustrations. NOTE Use a High Speed HDMI® cable. Please check your PC settings if you cannot hear any sound in HDMI mode. Press the INPUT button on the remote control to select either HDMI IN 1 or HDMI IN 2. Using a DVI to HDMI cable may cause compatibility issues.
MAKING CONNECTIONS ENGLISH Display Port connection Transmits the digital video and audio signals from your PC to the TV. Connect your PC to the TV using the display port cable as illustrated below. NOTE yy Sound may not hear depending on the DP version of your PC. yy Dolby Digital and DTS are not supported. If no sound is coming out, set the audio output of the connected device to PCM. yy Press the INPUT button on the remote control to select DisplayPort.
REMOTE CONTROL 35 The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
INSTALLING LG MONITOR SOFTWARE ENGLISH INSTALLING LG MONITOR SOFTWARE Insert the the Software CD included in the product package into your PC's CD driver and install the LG Monitor Software. 1 Set up Internet Explorer as the default web browser. 2 Click 'LG Monitor Software' on the CD's main screen. When the file download window appears, click 'Run'. (Although the screen below may differ depending on your operating system or Internet Explorer version, the installation methods are the same.
INSTALLING LG MONITOR SOFTWARE 8 6 When the installation is complete, restart your system. The LG Monitor Software starts the installation as shown below: NOTE 7 The program you selected on the FUNCTION page will install automatically. 1 If you run Screen Split, the Screen Split icon [ ] appears in the system tray at the right bottom of the PC screen. 2 Right-click the Screen Split icon and select a layout you want.
CUSTOMIZING SETTINGS ENGLISH CUSTOMIZING SETTINGS Accessing the Main Menus The menus displayed on the TV screen may vary depending on the selected input mode. TV, Component, AV 1 2 3 4 Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. BACK.
CUSTOMIZING SETTINGS 39 To select Picture Mode PICTURE SETTINGS> PICTURE> Picture Mode Select the picture mode optimized for the viewing environment or the programme. Depending on input signal, available range of picture modes may differ. ꕋ Expert mode is for picture tuning professionals to control and fine-tune using a specific image. For normal images, the effects may not be dramatic. Vivid Heightens contrast, brightness and sharpness to display vivid images.
CUSTOMIZING SETTINGS ENGLISH Expert Pattern [This feature is available on certain models only] Patterns used for expert adjustment. Color Filter Filters a specific color spectrum in RGB colors to fine-tune color saturation and hue accurately. Color Temperature Adjusts the overall tone of the screen as desired. In Expert mode, detailed finetuning can be set via Gamma method, etc. Color Management This system is used by experts to adjust color with a test pattern.
CUSTOMIZING SETTINGS 41 AUDIO To use Sound Mode SETTINGS> AUDIO> Sound Mode Adjusts TV audio to an optimal level based on a selected sound mode. Standard Suitable for all types of video. News / Music / Cinema / Sport / Game Sets audio optimized for a specific genre. Sport : This feature is available in certain countries only. News : This feature is available on certain models only. Using the Sound Effect function SETTINGS> AUDIO> Sound Effect the user can select various sound effects.
CUSTOMIZING SETTINGS To use DTV Audio Setting function ENGLISH SETTINGS> AUDIO> DTV Audio Setting [Depending on model] When different audio types exist in an input signal, this function allows you to select the audio type you want. If set to AUTO, the search order is HE-AAC → Dolby Digital+ → Dolby Digital → MPEG and output is produced in the first Audio Format found. - In Italy / Latvia / Lithuania only, the search order is HE-AAC → Dolby Digital+ → MPEG → Dolby Digital.
CUSTOMIZING SETTINGS 43 To view programme information SETUP Press 'INFO' button. Displays information on current programme and/or current time, etc. TV Guide Press 'GUIDE' button. [In Digital mode only] Obtains information about programmes and airtime. Checks the broadcasting time of the desired programme and schedule viewing. Automatically Setting Up Programme SETTINGS> SETUP> Auto Tuning Automatically tunes the programmes. 1.Select Country where the TV is used.
CUSTOMIZING SETTINGS To edit programmes ENGLISH SETTINGS> SETUP> Programme Edit Edits the saved programmes. Set as favourite programme, block/unblock programme, skip programme etc. of the selected programme. To set favourite programmes SETTINGS> SETUP> Programme Edit [This feature is available on certain models only.] 1.Select the channel you want. 2.Press the FAV button to select Favourite Group and then OK. You can check your favourite channels by pressing the LIST button on the remote control.
CUSTOMIZING SETTINGS 45 Press the 'TEXT' button. [In UK/Ireland only] The TV gives you access to digital teletext which gives much better text,graphics etc. than older analogue teletext. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. * Teletext within digital service 1.Press the numeric or P button to select a certain service which broadcasts digital teletext. 2.
CUSTOMIZING SETTINGS ENGLISH LOCK LOCK To set the password SETTINGS> LOCK> Set Password Set or change the TV password. The initial password is set as [0000]. When France is selected for Country, password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’,‘0’,‘0’,‘0’ . To lock the system SETTINGS> LOCK> Lock System Locks the selected programme. First set Lock System to On.
CUSTOMIZING SETTINGS OPTION SETTINGS> OPTION> Language(Language) You can select the language of the menu displayed on the screen and the digital sound broadcasting. Menu Language Selects a language for the display text. Audio Language [In Digital mode Only]: Selects the desired language when watching digital broadcasting containing several voice languages. Subtitle Language [In Digital mode Only]: [This feature is available in certain countries only.
CUSTOMIZING SETTINGS ENGLISH To specify Factory Reset SETTINGS> OPTION> Factory Reset All stored information is deleted and TV settings are reset. TV turns itself off and back on, and all settings are reset. When Lock System is in place, a pop-up window appears and asks for password. Do not turn off the power during initialization. To change TV mode SETTINGS> OPTION> Mode Setting Selects Standard or Store Demo. When in use in home, please select Standard. Store Demo mode is for store display.
CUSTOMIZING SETTINGS 49 To connect a USB device To remove the USB device Q.MENU> USB device Select a USB storage device that you want to remove. When you see a message that the USB device has been removed, separate the device from the TV. Once a USB device has been selected for removal, it can no longer be read. Remove the USB storage device and then re-connect it.
CUSTOMIZING SETTINGS ENGLISH Available video file Maximum: 1920 x 1080 @ 30 p (only Motion JPEG 640 x 480 @ 30 p) .asf, .wmv [Video] VC-1 Advanced Profile, VC-1 Simple and Main Profiles, MP43 [Audio] WMA Standard .3gp, .3gp2 [Video] H.264/AVC, MPEG-4 Part2 [Audio] AAC, AMR(NB/WB) .divx, .avi [Video] DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion JPEG [Audio] MPEG-1 Layer I, II, Dolby Digital, MPEG-1 Layer III (MP3), *DTS .mp4, .m4v, .mov [Video] H.
CUSTOMIZING SETTINGS 2D(jpeg, jpg, jpe), 3D(jps) [Available file type] SOF0: baseline, SOF1: Extend Sequential, SOF2: Progressive [Photo size] Minimum: 64 x 64 Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) 3D (mpo) [Available file type] mpo [Photo size] 4:3 size: 3,648 x 2,736 / 2,592 x 1,944 / 2,048 x 1,536 3:2 size: 3,648 x 2,432 BMP [Photo size] Minimum : 64 x 64 Maximum : 9600 x 6400 PNG [Available file type] Interlace, Non-Interlace [Photo size] Minimum : 64 x
CUSTOMIZING SETTINGS ENGLISH NETWORK To connect to the network [Depending on model] NETWORK SETTINGS> NETWORK> Network Setting Set IP Mode to IP Auto Setting or IP Manual Setting. IP Auto Setting Select this mode if your Internet service is broadband. IP Manual Setting Select this mode if you are using the Internet in an office (for example, fixed IP). If you select IP Manual Setting, type in the IP address. Select OK to connect to the network.
CUSTOMIZING SETTINGS 53 Operational problems Cannot view certain programmes. Adjust the location or orientation of the antenna. Save the programmes you wish to view using Auto Tuning or Programme Edit. There is a delay after the TV is switched on before the image is fully visible. This is normal. Any delay is due to an image deletion process which cleans up image noise that may occur when the TV is first switched on.
CUSTOMIZING SETTINGS ENGLISH Sound problems Screen display is on but there is no sound. Check other TV programmes. [Depending on model] Ensure the TV Speaker is set to On. For an analogue broadcast, stereo is not clear or sound comes from one speaker only. In a poor reception area (areas with weak or unstable signals) or if Multi Audio is not stable, select Mono on Multi Audio. Adjust the Balance using the Navigation Button. TV sound is not in sync with the image or the sound breaks up occasionally.
CUSTOMIZING SETTINGS 55 1 2 3 4 Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. BACK. When you return to the previous menu, press Easy control Function PIP Screen Settings Reset Each option is described below. Menu Easy control Brightness Contrast Adjusts the brightness and contrast of the screen.
CUSTOMIZING SETTINGS 56 ENGLISH Ratio Settings Ratio Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. When you return to the previous menu, BACK. press 1 2 3 4 Wide Original Cinema1 Cinema2 XGaGX ̵ V ̷GaGMove V ඖGaGOK ඔGaG Back Each option is described below.
CUSTOMIZING SETTINGS 1 2 3 4 Function Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. When you return to the previous menu, BACK.
CUSTOMIZING SETTINGS ENGLISH PIP Settings 1 2 3 4 Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. When you return to the previous menu, BACK.
CUSTOMIZING SETTINGS Picture Settings 3 4 Screen Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. When you return to the previous menu, BACK. press Easy control Picture > Color > Function PIP Screen Settings Reset ▲/▼ : Move / ▶ : Ok ◀ : Back Each option is described below.
CUSTOMIZING SETTINGS ENGLISH Color Settings 1 2 3 4 Screen Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. When you return to the previous menu, BACK. press Easy control Picture > Color > Function PIP Screen Settings Reset ▲/▼ : Move / ▶ : Ok ◀ : Back Each option is described below.
CUSTOMIZING SETTINGS Settings English > Standby Light On > Automatic Standby Off > Key Lock Off > Language 1 2 3 4 Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. When you return to the previous menu, BACK.
CUSTOMIZING SETTINGS ENGLISH Reset Reset Do you want to reset your settings? 1 2 3 4 Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press OK . Press the Navigation buttons to scroll to the setting or option you want and press OK . When you are finished, press EXIT. When you return to the previous menu, BACK. press Easy control Reset Cancel Function PIP Screen Settings Reset ▲/▼ : Move Each option is described below.
MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product's lifespan. CAUTION y y Make sure to turn the power off and disconnect the power cord and all other cables first. y y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth.
MAINTENANCE ENGLISH Preventing “Image burn” or “Burn-in” on your TV screen y y If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. y y If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
TROUBLESHOOTING Symptom Troubleshooting No image is displayed. y y Check whether there is a power cut or whether the power cord is properly connected to the power outlet. y y Check if the standby indicator is turned off. y y If the screen is turned off due to use of the Energy Saving mode, press any button on the remote control to disable the Energy Saving mode and display the image. y y Move the mouse or press any key, then the screen will appear. The 'Out of Range' message is displayed on the screen.
TROUBLESHOOTING ENGLISH NOTE yy Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency or refresh rate and is represented by Hz. yy Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle.
SPECIFICATIONS ENGLISH SPECIFICATIONS Satellite Digital TV1 Digital TV Analogue TV Television system DVB-T/T2 DVB-C DVB-S/S2 DVB-T DVB-C PAL/SECAM B/G/D/K, PAL I/I’, SECAM L/L’2 Programme coverage VHF, UHF C-Band, Ku-Band VHF, UHF VHF: E2 to E12, UHF : E21 to E69, CATV: S1 to S21, HYPER: S21 to S47 Maximum number of storable programmes 6,000 1,500 1 Only DVB-T2 support models 2 Except for Nordic countries (Denmark, Finland, Norway and Sweden) Panel Video Signal Screen Type 730 mm Wide Pix
SPECIFICATIONS ENGLISH HDMI / DisplayPort(PC) supported mode Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) 720 x 400 31.468 70.080 640 x 480 31.469 37.500 59.940 75.000 800 x 600 37.879 46.875 60.317 75.000 1024 x 768 48.363 60.023 1152 x 864 Component supported mode Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) 720 x 480 15.730 15.750 59.940 60.000 720 x 576 15.625 50.000 720 x 480 31.470 31.500 59.940 60.000 60.004 75.029 720 x 576 31.250 50.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service.
