LCD TV PLASMA TV MODELS: 32LC2D 32LC2DC 37LC2D 42LC2D MODELS: 42PC3D 42PC3DC 42PC3DV 50PC3D 50PC3DX 42PC1DVH 42PC3DH 42PC3DVA 50PC3DH OWNER’S MANUAL Internet Home Page : http://www.lge.com http://www.lg.ca http://www.lgcommercial.com ENERGYSTAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Instructions Safety Instructions WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. Ow ner's Man ual 2. Keep these instructions. 8.
Safety Instructions 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 14. Refer all servicing to qualified service personnel.
Contents Introduction Contents 2 Warnings 3~4 Safety Instructions 7 Accessories 8 Controls (Model Name: 32/37/42LC2D**) 8 Swivel Stand (42LC2D** only) 9 Connection Options (Model Name: 32/37/42LC2D**) 10 Controls (Model Name: 42PC1D**/42PC3D**/50PC3D**) 11 Connection Options (Model Name: 42PC1D**/42PC3D**/50PC3D**) Operation Installation 12~16 Remote Control Key Functions 17 18~20 Various Installation Basic Connection 21 22~23 23 24~25 26~27 28 28 29~31 Antenna or Cable Connection VCR
Operation Contents Time Menu Options 44 44 45 45 46 Auto Clock Setup Manual Clock Setup On/Off Timer Setup Sleep Timer Auto Off Option Menu Features 47 48 48 49 50 50 51 Aspect Ratio Control Cinema 3:2 Mode Setup Caption Caption/Text Caption Option Low Power (42PC1D**/42PC3D**/50PC3D** only) ISM (Image Sticking Minimization) Method (42PC1D**/42PC3D**/50PC3D** only) 52~53 Parental Lock Setup 54~59 External Control Device Setup 60~61 IR Codes 62 Programming the Remote 63~64 Programming Codes
Introduction Introduction Accessories Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the dealer where you purchased the product. User must use the shield signal interface cable (D-sub 15 pin cable) with ferrite cores to maintain the standard compliance for the product.
Introduction Controls (Model Name: 32/37/42LC2D**) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV. CH CHANNEL (D, Buttons E) VOL VOLUME (F,G) Buttons ENTER Button ENTER MENU MENU Button INPUT INPUT Button R (Power) Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
Introduction Connection Options (Model Name: 32/37/42LC2D**) - Here shown may be somewhat different from your TV.
Introduction Controls (Model Name: 42PC1D**/42PC3D**/50PC3D**) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV. 42PC1D** INPUT MENU ENTER Button INPUT Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
Introduction Connection Options (Model Name: 42PC1D**/42PC3D**/50PC3D**) - Here shown may be somewhat different from your TV.
Introduction Remote Control Key Functions POWER Turns your TV or any other programmed equipment on or off, depending on mode. INPUT TV INPUT POWER DVD TV AUDIO VCR MODE CABLE STB GUIDE RATIO DAY - MENU MODE Selects the remote operating mode: TV, DVD, VCR, AUDIO, CABLE, or STB. Select a mode other than TV, for the remote to operate an external device.
Introduction VCR/DVD/DVHS/Camcorder BUTTONS Control some video cassette recorders or DVD players ("RECORD" button is not available for DVD player). INPUT TV INPUT POWER DVD TV AUDIO DAY + / DAYMoves forward or backward in 24 hour increments. VCR MODE CABLE STB VOLUME UP/DOWN Increases/decreases the sound level. CHANNEL UP/DOWN Selects available channels found with EZ scan and Manual scan. DAY - MENU DAY+ GUIDE RATIO PAGE UP/DOWN Moves from one full set of screen information to the next one.
Introduction INPUT INPUT TV INPUT Auto Link POWER DVD TV AUDIO VCR MODE CABLE STB 1. When every external equipment is connected: Antenna Cable HDMI/DVI DAY - MENU AV1 AV2 Component1 RGB-DTV (or RGB-PC) Component2 DAY+ GUIDE RATIO 2. When no external equipment is connected: Antenna Cable RGB-DTV (or RGB-PC) ENTER 3.
Introduction Brief Info. What is Brief Info? : Brief Info shows the present screen information. INPUT TV INPUT POWER DVD VCR How to use? CABLE STB 1. Press the INFO button to show the Brief Info on the screen. 2. Press the INFO button or EXIT button to exit. - The INFO button does not work in Component1, Component2, RGB, and HDMI/DVI modes.
Introduction INPUT TV INPUT POWER TV AUDIO DAY - MENU DVD EPG (Electronic Program Guide) (In DTV mode) VCR MODE CABLE STB GUIDE GUIDE DAY+ - This system has an Electronic Program Guide (EPG) to help your navigate through all the possible viewing options. - The EPG supplies information such as program listings, start and end times for all available services. - This function can be used only when the EPG information is broadcasted by broadcasting companies.
Installation Installation • The TV can be installed in various ways such as on a wall, or on a desktop etc. • The TV is designed to be mounted horizontally. GROUNDING Power Supply Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Installation Installation Basic Connection (For 32/37/42LC2D**) 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the External equipment Connections section. Cable holder 32LC2D** 2 37/42LC2D** CABLE MANAGEMENT Reinstall the CABLE MANAGEMENT as shown. 32LC2D** 3 37/42LC2D** Bundle the cables using the supplied twister holder.
Installation Basic Connection How to use stand (For 42PC1D**, 42PC3D**) 1 Place the set with the screen facing down on a cushion or soft cloth as shown. Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward. 2 Pull the stand out as shown. After unfolding the stand, please insert and tighten the screws (provided as parts of the product) in the holes (B) on the bottom of the stand. (A) (B) 3 When connecting cables to the set, Do not disengage the lock (C).
Installation How to join the product assembly to the wall to protect the set tumbling - Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. - The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and causing injury. It will also prevent the product from damage caused by fall.
S-VID R R L/MONO AUDIO L/MONO VIDEO AUDIO S-VIDEO VIDEO AV IN 2 AV IN 2 Installation External Equipment Connections AV OUT S-VIDEO S-VIDEO R R ( Antenna or Cable Connection VIDEO L/MONO All cables shown are not included with the TV AUDIO NOTE: ) AUDIO S-VIDEO VIDEO AUDIO AUDIO L/MONO COMPONENT IN VIDEO AV IN 1 Analog and Digital TV signals provided on antenna VIDEO AV IN 2 - Antenna or Cable Service without a Cable Box Connection.
Installation VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna 2 VCR 1 Connect the RF antenna out socket of the VCR to the Antenna socket on the set. 2 Connect the antenna cable to the RF antenna in socket of the VCR.
Installation AV OUT ( VIDEO ) AUDIO S-VIDEO VIDEO AUDIO COMPONENT IN AV IN 1 When connecting with an S-Video cable VCR ANT IN OUT S-VIDEO 1 Connect the S-VIDEO output of the VCR to the SVIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. 2 Connect the audio outputs of the VCR to the AUDIO input jacks on the set. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
HDMI/DVI IN RS-232C IN DIGITAL AUDIO (CONTROL & SERVICE) OUT OPTICAL AV OUT Installation ( VIDEO ) AUDIO S-VIDEO VIDEO AUDIO COMPONENT IN AV IN 1 DVD Setup When connecting with a S-Video cable DVD (R) AUDIO (L) S-VIDEO 2 1 AV V OUT (MONO) VIDEO AUDIO UDIO S-VIDEO VIDEO AUDIO UDIO COMPONENT IN AV V IN 1 1 Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
Installation When connecting with a component cable DVD B R (R) AUDIO (L) HDMI/DVI IN RS-232C IN DIGITAL AUDIO (CONTROL & SERVICE) OUT OPTICAL 1 2 VIDEO AUDIO UDIO AV V OUT (MONO) VIDEO AUDIO UDIO S-VIDEO COMPONENT IN AV V IN 1 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set. 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set. 3 Turn on the DVD player, insert a DVD.
AUDIO IN (RGB/DVI) REMOTE CONTROL RGB IN RS-232C IN DIGITAL AUDIO (CONTROL & SERVICE) OUT HDMI/DVI IN REMOTE CONTROL IN RS-232C IN DIGITAL AUDIO (CONTROL & SERVICE) OUT OPTICAL AUDIO (RGB/DVI) OPTICAL RGB IN (PC/DTV) RGB (PC/DTV) Installation HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
Installation When connecting with a Component cable 1 Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on the set. 2 Connect the audio output of theRS-232C digital set-top box IN DIGITAL AUDIO HDMI/DVI IN (CONTROL & SERVICE) OUT to the COMPONENT INOPTICAL AUDIO jacks on the set. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
Installation Monitor Out Setup - The TV has a special signal output capability which allows you to hook up a second TV or monitor. 1 Connect the second TV or monitor to the TV’s AV OUTPUT jacks. 2 See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. AV V OUT (MONO) VIDEO AUDIO UDIO S-VIDEO VIDEO AUDIO UDIO COMPONENT IN AV V IN 1 1/2 • Component 1-2, RGB-PC/RGB-DTV, HDMI/DVI, DTV input sources cannot be used for Monitor out.
RGB IN (PC/DTV) RGB (PC/DTV) Installation PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable AUDIO IN (RGB/DVI) REMOTE CONTROL RGB IN REMOTE CONTROL IN AUDIO (RGB/DVI) RGB IN (PC/DTV) 1 Connect the RGB output of the PC to the RGB (PC/DTV) jack on the set. 2 Connect the PC audio outputs to the AUDIO (RGB/DVI) jack on the set. 3 Turn on the PC and the set.
Installation 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. 3. When Source Devices connected with HDMI/DVI Input, output PC Resolution (VGA, SVGA, XGA), Position and Size may not fit to Screen.Press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center. 4.
Installation Screen Setup for PC mode - When RGB is connected to PC input and select the RGB-PC, this function is used. When HDMI/DVI is connected to PC input and select HDMI/DVI input, this function is used. In RGB-DTV mode, SIZE and PHASE is not available. After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
Operation Operation Basic operation Turning on the TV 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT, CH D / E button on the TV or press the POWER, TV INPUT, INPUT, CH D / E, Number (0 ~ 9) button on the remote control . 2. Select the viewing source by using TV INPUT, INPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. 3.
Operation On Screen Menus Selection and Adjustment How to adjust the OSD screen 1. Press the MENU button and then D 2. Press the G button and then use D /E /F /G SETUP G VIDEO AUDIO TIME / E button to select each menu. button to display the available menus.
Operation Setup Menu Options EZ Scan (Channel Search) SETUP G VIDEO AUDIO TIME EZ Scan Manual Scan Channel Edit DTV Signal Input Source Input Label Set ID SETUP VIDEO AUDIO TIME OPTION OPTION LOCK LOCK - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes.
Operation Channel Edit SETUP G VIDEO AUDIO TIME EZ Scan Manual Scan Channel Edit DTV Signal Input Source Input Label Set ID SETUP VIDEO AUDIO TIME OPTION OPTION LOCK LOCK EZ Scan Manual Scan Channel Edit DTV Signal Input Source Input Label Set ID MENU G Selection ( G or ) leads you to the channel edit screen. Previous * Custom List - There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list.
Operation Setup Menu Options continued DTV Signal Strength SETUP G VIDEO AUDIO TIME EZ Scan Manual Scan Channel Edit DTV Signal Input Source Input Label Set ID SETUP VIDEO AUDIO TIME OPTION OPTION LOCK LOCK - Shows how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. - DTV Signals: Only when the input signal is DTV or CADTV, this function is available.
Operation Input Label SETUP G VIDEO AUDIO TIME EZ Scan Manual Scan Channel Edit DTV Signal Input Source Input Label Set ID SETUP VIDEO AUDIO TIME OPTION OPTION LOCK LOCK - Sets a label to each input source or lets you skip the input source which is not in use when you press INPUT button.
Operation V ideo Menu Options EZ Picture - EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. - When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ Picture automatically changes to Custom. - Daylight, Normal, Night Time, Movie, Video Game, and Sports settings are preset for optimum picture quality at the factory and are not adjustable.
Operation Manual Picture Control (EZ Picture-Custom option) SETUP VIDEO G AUDIO TIME EZ Picture Contrast 85 Brightness 50 Color 50 Sharpness 50 Tint 0 Color Temperature Video Reset SETUP G 90 F G E AUDIO R G TIME OPTION LOCK Contrast VIDEO OPTION MENU LOCK Previous - Adjust the picture appearance to suit your preference and viewing situations. 1 2 3 4 Press the MENU button and then use D / E button to select the VIDEO menu.
Operation Audio Menu Options Audio Language SETUP VIDEO AUDIO G TIME OPTION Audio Language EZ SoundRite EZ Sound Balance Treble Bass Front Surround TV Speaker BBE SETUP VIDEO 0 50 50 L R AUDIO TIME OPTION LOCK LOCK - Other languages may be available if a digital signal is provided by the broadcasting station. Audio Language EZ SoundRite EZ Sound Balance Treble Bass Front Surround TV Speaker BBE G English Spanish French Previous MENU 1 Press the MENU button and then use AUDIO menu.
Operation EZ Sound - EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. 2 3 4 5 6 7 8 9 0 FLASHBK EZ SOUND - When adjusting sound options (treble, bass, and front surround) manually, EZ Sound automatically switches Custom. - Normal, Stadium, News, Music, and Theater are preset for good sound quality at the factory and are not adjustable.
Operation Audio Menu Options continued Stereo/SAP Broadcasts Setup - This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one. - When having selected Stereo or SAP button on the remote control, this TV can only receive the signal when that the TV station transmits the proper signals.
Operation TV Speakers On/Off Setup SETUP VIDEO AUDIO G TIME OPTION Audio Language EZ SoundRite EZ Sound Balance Treble Bass Front Surround TV Speaker BBE SETUP VIDEO 0 50 50 L R AUDIO TIME OPTION LOCK LOCK - Turn TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. Audio Language EZ SoundRite EZ Sound Balance Treble Bass Front Surround TV Speaker BBE MENU G Off On Previous 1 Press the MENU button and then use AUDIO menu.
Operation T ime Menu Options Auto Clock Setup SETUP VIDEO AUDIO TIME Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off SETUP VIDEO AUDIO Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off G Off On Time Zone Eastern Daylight Saving Auto TIME G OPTION OPTION LOCK LOCK - The time is set automatically from a digital channel signal. - The current time will be set automatically from a digital channel signal provided by the broadcasting station.
Operation On/Off Timer Setup Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off SETUP VIDEO AUDIO TIME SETUP VIDEO AUDIO Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off TIME G OPTION OPTION LOCK LOCK - Timer function operates only if current time has been set. - Off-Timer function overrides OnTimer function if they are set both set to the same time. - The TV must be in standby mode for the On-Timer to work.
Operation T ime Menu Options continued Auto Off SETUP VIDEO AUDIO TIME Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off VIDEO AUDIO Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off TIME G OPTION OPTION LOCK LOCK - If the TV is on and there is no input signal, the TV turns off automatically after 10 minutes. 46 SETUP 1 2 3 4 MENU If set to On and there is no input signal, the TV turns off automatically after 10 minutes.
Operation Option Menu Features Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. - If you are viewing a picture with a 16:9 aspect ratio, you can’t use the Horizon aspect ratio option.
Operation Option Menu Features continued Cinema 3:2 Mode Setup SETUP VIDEO AUDIO TIME OPTION Aspect Ratio Cinema 3:2 Mode Caption Caption/Text Caption Option Language ISM Method Low Power SETUP VIDEO AUDIO TIME Aspect Ratio Cinema 3:2 Mode Caption Caption/Text Caption Option Language ISM Method Low Power G Off On OPTION G LOCK LOCK MENU Previous - Most movies are 24 frames/sec, but TV signal is 30 frames/sec.
Operation Caption/Text * Analog Broadcasting System Captions SETUP VIDEO AUDIO TIME OPTION Aspect Ratio Cinema 3:2 Mode Caption Caption/Text Caption Option Language ISM Method Low Power SETUP VIDEO AUDIO TIME Aspect Ratio Cinema 3:2 Mode Caption Caption/Text Caption Option Language ISM Method Low Power G OPTION G LOCK LOCK - Select a caption mode for displaying captioning information if provided on a program. - Analog caption displays information at any position on the screen.
Operation Option Menu Features continued Caption Option SETUP VIDEO AUDIO TIME OPTION Aspect Ratio Cinema 3:2 Mode Caption Caption/Text Caption Option Language ISM Method Low Power SETUP VIDEO AUDIO TIME Aspect Ratio Cinema 3:2 Mode Caption Caption/Text Caption Option Language ISM Method Low Power G OPTION G LOCK LOCK - Customize the DTV/CADTV captions that appear on your screen.
Operation ISM (Image Sticking Minimization) Method (42PC1D**, 42PC3D**, 50PC3D** only) SETUP VIDEO AUDIO TIME OPTION Aspect Ratio Cinema 3:2 Mode Caption Caption/Text Caption Option Language ISM Method Low Power SETUP VIDEO AUDIO TIME OPTION G LOCK - A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image ; even though the image is changed. Use our unique method to minimize any fixed image on the screen.
Operation Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period.
Operation Parental Lock Setup * For U.S.A. SETUP VIDEO AUDIO TIME SETUP Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block VIDEO AUDIO TIME OPTION OPTION LOCK LOCK G * For Canada SETUP VIDEO AUDIO Lock System Set Password Block Channel TV Rating-English TV Rating-French Input Block G * * * SETUP VIDEO AUDIO TIME OPTION OPTION LOCK LOCK G - A password is required to gain access to this menu if the Lock System is turned on.
Reference External Control Device Setup - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. - Connect the serial port of the control device to the RS-232C jack on the TV back panel. - RS-232C connection cables are not supplied with the TV. RS-232C Setup HDMI/DVI HDMI/D VI IN RS-232C IN DIGITAL AUDIO (CONTROL & SERVICE) OUT OPTICAL PC Type of Connector; D-Sub 9-Pin Male No.
Reference Set ID - Use this function to specify a TV ID number. - Refer to ‘Real Data Mapping’. See page 56. SETUP G VIDEO 1. Press the MENU button and then use SETUP menu. 2. Press the G button and then use D /E D /E button to select the AUDIO button to select Set ID. TIME 3. Press the G button and then use D / E button to adjust Set ID to choose the desired TV ID number. The adjustment range of Set ID is 1 ~ 99.
Reference 01. Power (Command2:a) 05. Volume Mute (Command2:e) G To control Power On/Off of the TV. G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
Reference 09. Color (Command2:i) 13. Remote Control Lock Mode (Command2:m) G To adjust the screen color. You can also adjust color in the Video menu. G To lock the remote control and the front panel controls on the set. Transmission Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][m][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 • Refer to ‘Real data mapping’. See page 56.
Reference These functions are available in 42PC1D**, 42PC3D**, 50PC3D** models only. 22. Tune Command (Command: m a) G To tune channel to following physical/major/minor number Transmission 18. ISM Method (Command2:p) G To avoid having a fixed image remain on screen.
Reference 23. Channel Add/Del (Command: m b) G To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 0: Channel Delete 1: Channel Add Acknowledgement [b][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][NG][Data][x] 24. Key (Command: m c) G To send IR remote key code Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code: Refer to page 61. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] 25. Input select(Command: x b) (Main Picture Input) G To select input source for TV.
Reference IR Codes How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes G Output waveform Single pulse, modulated with 37.
Reference Code (Hexa) 0B 0F 08 C4 C5 79 0E 10 ~ 19 4C 1A 09 02 03 00 01 1E AA 39 40 41 07 06 44 43 A9 52 4D 5B 65 0A CB D6 5A D0 BF D4 D5 D7 C6 76 77 AF Function INPUT TV INPUT POWER POWER ON POWER OFF RATIO TIMER Number Key 0~ 9 - (Dash) FLASHBK MUTE VOL D VOLE CH D CH E FAV INFO CC D E F G ENTER MENU GUIDE EZ SOUND EZ PIC EXIT FREEZE SAP ADJUST TV AV1 AV2 COMPONENT 1 COMPONENT 2 RGB-PC RGB-DTV HDMI/DVI Ratio 4:3 Ratio 16:9 Ratio Zoom Note R/C Button R/C Button R/C Button (Power On/Off) Discrete IR Cod
Reference Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming a code into a remote mode 1 Test your remote control.
Reference Programming Codes VCRs Brand Codes Brand Codes Brand Codes Brand Codes AIWA AKAI 034 016 125 072 031 012 035 028 108 003 031 005 065 112 108 012 034 059 006 029 036 129 003 034 031 107 132 012 004 043 031 031 012 040 043 012 048 130 KENWOOD 014 047 001 101 034 003 017 040 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 013 063 031 031 067 101 013 PORTLAND PULSAR QUARTZ QUASAR RCA 108 072 011 033 013 040 107 145 003 031 053 058 148 014 032 1
Reference Digital Cable/Satellite Box Brand Codes Brand ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER 123 050 051 013 036 008 054 050 005 011 141 024 038 093 097 122 089 114 017 133 GENERAL INSTRUMENT 003 031 HITACHI 139 HOUSTON TRACKER 033 057 HUGHES 068 JANIEL 060 JERROLD 061 KATHREIN 108 LEGEND 057 LG 001 LUTRON 132 LUXOR 062 MACOM 010 065 MEMOREX 057 NEXTWAVE 028 NORSAT 069 CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME EUROPLUS FUJITSU 126 129 014 015 018 055 009 012 077
Reference Troubleshooting Checklist The operation does not work normally. The remote control doesn’t work • Check to see if there is any object between the product and the remote control causing obstruction. • Are batteries installed with correct polarity (+ to +, - to -)? • Correct remote operating mode set: TV, VCR etc.? • Install new batteries. Power is suddenly turned off • Is the sleep timer set? • Check the power control settings.
Reference The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product • Press the VOL or VOLUME button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? • Adjust Balance in menu option. • A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
Reference Product Specifications Dimensions 32LC2D (32LC2D-UD) including stand 31.9 x 24.8 x 9.3 inches excluding stand 31.9 x 22.3 x 4.9 inches (Width x Height x Depth) 811 x 630 x 235 mm 32LC2DC 811.0 x 566.8 x 123.5 mm (32LC2DC-UD) Weight Dimensions including stand 48.3 pounds / 21.9 kg excluding stand 40.8 pounds / 18.5 kg including stand 37.2 x 28.7 x 11.3 inches (Width x Height x Depth) 944 x 729 x 286 mm excluding stand 37LC2D (37LC2D-UD) 37.2 x26.0 x 5.1 inches 944.0 x 659.
Reference Dimensions including stand (Width x Height x Depth) 42PC1DVH 1129.0 x 748.5 x 380.0 mm excluding stand (42PC1DVH-UD) 42PC3D Dimensions (42PC3D-UD) (Width x Height x Depth) including stand 53.4 pounds / 24.2 kg including stand 44.4 x 29.5x 15.0 inches 1129.0 x 748.5 x 380.0 mm (42PC3DC-UD) Dimensions including stand 64.4 pounds / 29.2 kg excluding stand 55.8 pounds / 25.3 kg including stand (Width x Height x Depth) (42PC3DV-UD) 44.4 x 27.4 x 4.1 inches 1129.0 x 695 x 103.
Téléviseur couleur à cristaux liquides MODÈLES: 32LC2D 32LC2DC 37LC2D 42LC2D Télé Plasma MODÈLES: 42PC3D 42PC3DC 42PC3DV 50PC3D 50PC3DX 42PC1DVH 42PC3DH 42PC3DVA 50PC3DH GUIDE DE L’UTILISATEUR Internet Home Page : http://www.lge.com http://www.lg.ca http://www.lgcommercial.com Lire attentivement ce manuel avant de faire fonctionner votre appareil. Le conserver à des fins de références. Noter les numéros de modèle et de série de l’appareil.