MFL34797007en-simp 9/8/08 3:15 PM Page 1 i ST'_ t r i I LCD TV I PLASMA OWNER'S MANUALTV LCD TV MODELS 32LCSDC 32LCSDCS 32LCSDCB 37LCSDC 37LC5DCB 37LCSDC1 42LC5DC 32LXSDC 32LXSDCS 42LBSDC PLASMA TV MODEL 32LCSOC 42PX8DC 32LC50CS 42PG65C 32LCSOCB 42PG60C 32LX50C 32LXSOCS 37LC50C 37LCSOCB 42LBSOC 42LC50C Please read this manual your set. Retain it for serial number of the set. bed on the back cover and quote ,rmation to your dealer when you require service.
MFL34797007en-simp 9/8/08 3:15 PM i Page 2 t r i WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, this product do not expose to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED Class B digital This equipment SERVICE PERSONNEL. device has been tested and found to com- ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
MFL34797007en-simp 9/8/08 3:15 PM i S]% t r Page 3 i SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus @ near water. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Clean only with dry cloth.
MFL34797007en-simp 9/8/08 3:15 PM i Page 4 t r i i SAFETY INSTRUCTIONS @ Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
MFL34797007en-simp 9/8/08 3:15 PM i Page 5 t r i WARNING / CAUTION ............................ 2 SAFETY INSTRUCTIONS Accessories .......................... 3 ...................................................... Front Panel Information ...................................... Back Panel Information ...................................... Stand Installation Remote Control Functions ................................ 12 14 16 Attaching 17 the TV to a Wall ...............................
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r i Page 6 i PREPARATION ACCESSORMES accessories are included tact the dealer where you purchased Ensure that the following the product. with your product. User must use shielded signal interface cables (D-sub If an accessory 15 pin cable) with ferrite is missing, cores to maintain please con- standard compliance for the product. For further information, see the the Owner's Manual files supplied CD-ROM.
MFL34797007en-simp 9/8/08 3:15 PM Page i S]% t r 7 i FRONT PANELINFORMATION + Here shown may be somewhat m If your product polishing has a protection different from your TV. tape attached, cloth is included with your product, remove the tape. And then wipe the product with a cloth (Ifa use it).
MFL34797007en-simp 9/8/08 3:15 PM i S]% t r Page 8 i 42PG60C, 42PG65C Remote Control Sensor POWER Button m Power/Standby Illuminates Illuminates O z Indicator red in standby mode. blue when the set is switched on. Stand (Only42PG65C model) 1 INPUT MENU ENTER Button Button Button VOLUME (-,+) Buttons 1 CHANNEL Buttons 42PX8DC This TV's stand is sold, separately.
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r Page 9 i BACK PANELINFORMATION Here shown may be somewhat different from your TV. m 52/57/42LC5 DC*,52/57/42LCSOC +, 42LBSDC, 42LB50C 52LXSDC +, 52LX50C + © z 42PX8DC 42PG60C, 42PG65C 777777777777777i/iD£_ ;;;;;;;7;7;7;717_!7777 9 i S\ ........................ 4:,,,,,_.,,,,,I .........................
MFL34797007en-simp 9/8/08 3:15 PM Page i0 /ih J PREPARATION Here shown may be somewhat different from your TV. This part mainly use picture for the LCD TV models. m O z (Only 42PG60C, @ HDMI/DVI Connect @ 42PG65C IN, HDMI @ AV IN a HDMI (DVI) connection DIGITAL AUDIO Connect ment. Models) O to either input. OUT digital audio from various types of equip- Note: In standby (Audio/Video) Connect Connect jacks.
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r Page ii i STAND INSTALLATION ( 32137LC5DC*, 32/37LC50C* ) ( 42PG65C ) -D Carefully place the product on a cushioned Carefully screen side down surface that will protect place the TV screen side down cushioned prod- surface to protect the on a m screen from damage. uct and screen from damage. © z "\\ i Assemble the product as shown. stand with the product @ Assemble the product shown.
MFL34797007en-simp 9/8/08 3:15 PM Page 12 /ih [ PREPARATION REMOTE CONTROL FUNCTMONS m When using the remote control, POWER O z aim it at the remote control Turns your TV or any other programmed or off, depending on mode. TV INPUT In AV 1-2, Component, sensor on the TV. equipment on POWER RGB, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel.
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r i Page 13 i (Only 42PG60C, 42PG65C models) MODE Select the remote's operating mode: TV, DVD, VCR (or STB). -D RATIO CC RATIO Change the aspect CC THUMBSTICK (Up/Down/Left /Right/ENTER) EXIT(or RETURN) ratio. m Select a closed caption. Navigate the on-screen menus and adjust the system settings to your preference. Clears all on-screen from any menu. © z displays and returns to TV viewing MENU Displays the main menu.
MFL34797007en-simp 9/8/08 3:15 PM Page 14 /ih J PREPARATION BACK COVER FOR WMREARRANGEMENT m Here shown may be somewhat (This feature different from your TV. is not available for all models.) m O O z onnect the cables as necessary. To connect an additional equipment, EQUIPMENT see the EXTERNAL SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed Install the CABLE HOLDER by accident.
MFL34797007en-simp 9/8/08 3:15 PM Page 15 /ih J BACK COVER FOR WMREARRANGEMENT Here shown may be somewhat different from your TV. (This feature is not available for all models.) m _o O o separate the CABLE HOLDER, installed the set. O Connect the cables as necessary. To connect an additional EQUIPMENT loosen the bolt © z equipment, see the EXTERNAL SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown.
MFL34797007en-simp 9/8/08 3:15 PM i S]% t r Page 16 i PREPARATION 42PX8DC 42PG60C, Hold the CABLE MANAGEMENT hands and pull it as shown. I-I"1 42PG65C Connect the cables as necessary. To connect additional equipment, with both EXTERNAL EQUIPMENT see the SETUP section. O z Install the CABLE O MANAGEMENT shown. (Except 42PG60C Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
MFL34797007en-simp 9/8/08 3:15 PM Page 17 /ih [ ATTACHING THE TV TO A WALL I This feature is not available We recommend Additionally, potentially Caution: for all models. that you set up the TV close to a wall so it cannot fall over if pushed we recommend causing injury that the TV be attached to a wall so it cannot backwards. be pulled in a forward direction, -D or damaging the product. Please make sure that children don't m climb on or hang from the TV.
MFL34797007en-simp 9/8/08 3:15 PM Page 18 /ih [ PREPARATION ATTACHING THE TV TO A DESK Here shown may be somewhat The TV must be attached potentially different from your TV. to desk so it cannot be pulled in a forward/backward causing injury or damaging direction, the product. I-I"1 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C 0 z Stand 4-Screws gQ 32LX5DC*, 32LX50C* Stand T Desk 42PX8DC Stand 2-Screws T Desk 42PG65C Stand /// // 4-Screws Desk gll 18 [ ................
MFL34797007en-simp 9/8/08 3:15 PM i Page 19 t r i VESAWALL MOUNTING This product accepts a VESA-compliant There 4 threaded holes are available mounting for attaching interface pad. (optional) the bracket. m 0 z 42PG60C 400. 400 42PX8DC 600.400 DESKTOP PEDESTALINSTALLATION For proper ventilation, allow a clearance of 4inches on each side from the wall. m Image shown may differ from your TV.
MFL34797007en-simp 9/8/08 3:15 PM Page 20 /ih J ANTENNA OR CABLE CONNECTMON 1. Antenna "O _o (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box I'm Connections. _o For optimum picture quality, adjust antenna direction O z Multi-family Wall (Connect if needed.
MFL34797007en-simp 9/8/08 3:15 PM i Page 21 t r i EXTERNAL EQUIPMENT SETUP i To prevent the equipment damage, never plug in any power cords until you have finished connecting i This part of external equipment all equipment. setup mainly use picture for LCD TV models. HD RECEIVERSETUP This TV can receive do receive digital below. Digital Over-the-air/Cable signals from a digital signals set-top without box or other an external digital external digital set-top box.
MFL34797007en-simp 9/8/08 3:15 PM i /i% t r Page 22 i EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect Connect the video outputs the COMPONENT IN (Y, PB, PR) of the DVD VIDEO to jacks on the set. i-m x Match the jack colors i-m (Y = green, PB = blue, and PR = red). z > m c i-m z m Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set. 2. How to use I Turn on the DVD player, insert a DVD.
MFL34797007en-simp 9/8/08 3:15 PM i S]% t r Page 23 i VCR SETUP When connecting with a RCA cable 1. How to connect Connect the AUDIO/VIDEO VCR. Match the jack colors = white, and Audio jacks between TV and (Video = yellow, Audio Left Right = red) m x -q m _o z > 2. How to use m c I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's -o manual.) m z i Select AV1 input source by using the INPUT the remote control.
MFL34797007en-simp 9/8/08 3:15 PM i S]% t r Page 24 i EXTERNAL EQUIPMENT SETUP PC SETUP When connecting D-sub 15pin cable 1. How to connect m x Connect m jack on the set. _o z > Connect m (RGB, the RGB output of the PC to the RGB the PC audio output DVI) to the AUDIO IN IN jack on the set. c 2. How to use m z m I Turn on the PC and the TV. i Select RGB-PC input source by using the INPUT on the remote control. button c -O When connecting HDM[ to DV! cable 1.
MFL34797007en-simp 9/8/08 3:15 PM Page 25 /ih t r i Supported Display Specifications 31.469 (RGB/HDMII-PC) Supported 70.08 31.469 3Z861 59.94 72.80 3Z500 75.00 56.25 3Z879 48.077 46.875 60.31 72.18 75.00 Display 48.363 56.476 60.023 60.00 70.06 75.02 Specifications (HDMI2-DTV) 31.500 31.469 60.00 59.94 44.960 45.000 59.94 60.00 33.720 33.750 59.94 60.00 m x -4 I"m c -D r'rl z -4 Supported Display Specifications (Y, CB/PB, CR/PR) r'rl -4 c -D 47.720 59.799 .........
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r Page 26 i * 42LB5DC, 42LB50C Supported Display Specifications (RGB/HDMII 31.469 -PC) Supported Display 70.08 31.469 Specifications (HDMI2-DTV) 31.500 60.00 31.469 59.94 59.94 3Z861 72.80 44.960 59.94 3Z500 75.00 45.000 60.00 35.156 56.25 33.720 59.94 3Z879 60.31 33.750 60.00 48.077 72.18 67.500 60.00 46.875 75.00 48.363 60.00 56.476 70.06 60.023 75.02 z -4 4Z700 60.00 m 4Z720 59.
MFL34797007en-simp 9/8/08 3:15 PM Page 27 /ih [ WATCHING TV TURNING ON THE TV @ First, connect power cord correctly. At this moment, the TV switches to standby i In standby mode. mode to turn TV on, press the (b/I the TV or press the POWER button Select the viewing source by using the the remote control. i This TV is programmed to remember (or ON/OFF) button on on the remote control. INPUT(or TV INPUT) button on which power state it was last set to, even if the power cord is out.
MFL34797007en-simp 9/8/08 3:15 PM Page 28 /ih [ WATCHING TV CHANNEL SETUP Auto Scan (EZ Scan) Automatically finds all channels available or cable inputs, and stores them list. through in memory Run EZ Scan again after any Antenna/Cable antenna on the channel connection changes. A password is required to gain access to EZ Scan menu if the Lock System is turned on. -p z < Press the MENU ^ or v button button and then use • to select the SETUP or• or menu.
MFL34797007en-simp 9/8/08 3:15 PM Page 29 /ih [ ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) Press the MENU button may differ and then use • slightly or • from what is shown in this manual. or ^ or v button to select the each menu. Press the• or available menus. > button and then use• • _1 • or ^ v < > button to display the SETUP z """ User can do manual channel selectionand add or delete individual channels. '!"[" .Y°u. ca_.na_ _!ct.o r. _!eIe!e !.n.! I_e. c:h a.
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r Page 30 i WATCHING TV AUDIO i You can available other language if a digital signal is pro- vided by the broadcasting i Automatically station• keeps on an equal volume level even if you change channel• Se ects the factory :Normal, _ ice _ Adjust the left/right kers N --IX C_ preset sound for type of program Stadium, News, Music, Theater, and User sound of speaker• i Turn the TV speaker On or off.
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r Page 31 i SCREEN IIIIIIII Automatically adjusts picture position and minimizes image shaking. iiiiiiii Adjusts screen manually. : Phase, Clock, H-Position, iiiiiiii Selematch the resolution and V-Position of RGB mode and selection of XGA mode. mTo initialize the adjusted value. > "D "D LOCK z E:I x For USA +iT!iT'iT'iTi!_!_i_ii_i_ii_ii+ii_ii_i+_ii!iTi!Ti!7!_i_Se!e?!?n?r0 _.........................................................................
MFL34797007en-simp 9/8/08 3:15 PM i Y]% t r ? Page 32 i APPENDIX TROUBLESHOOTING i Check to see if there is any object causing obstruction. between the product Ensure you are pointing i Ensure that the bat2eries are installed i Ensure that the correct remote with correct operating and the remote control the remote control directly polarity at the TV. (+ to % - to -). mode is set: TV, VCR etc. i Install new bat2eries.
MFL34797007en-simp 9/8/08 3:15 PM i Y]% t r Page 33 i I Adjust Balance in menu option. i A change in ambient the product humidity is turned or temperature may result in an unusual noise when on or off and does not indicate a fault with the product. > m z E:I x 7 ii! IIIIIIII Adjust resolution, horizontal frequency, or vertical frequency. iiiiiiii Check the input source. iiiiiiii Work the Auto configure or adjust clock, phase, or H/V position. (Option) 11111111 Check the signal cable.
MFL34797007en-simp 9/8/08 3:15 PM Page 34 /ih [ MAINTENANCE Early malfunctions enjoy your Caution: Cleaning can be prevented. Careful and regular cleaning can extend the amount of time you can new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. the Screen Here's a great way to keep the dust offyour water and a little fabric softener screen for a while. Wet a soft cloth or dish washing detergent.
MFL34797007en-simp 9/8/08 3:15 PM i ST'_ t r ? Page 35 i PRODUCT SPECIFICATIONS Width x Height x Depth (inches/mm) / ks) With Stand x 60Z5 Width x Height x Depth (inches/mm) 806.6 Stand Without Stand x 249.0 mm x 552.3 x 9Z2 mm 33.7 pounds / 15.3kg 2Z6 pounds / 12.5 kg 36.5 x 2Z4 x 10.4 inches 926.8 x 695.8 x 264.6 mm With Stand ................................................................... 36.sx7_4;:8 x 4;:7_ il:,_i:,es ..................... Without Weight (pounds 806.6 ....
MFL34797007en-simp 9/8/08 3:15 PM i ST_ t r Page 36 i LG ÷ nits i \j/ i In€°