OWNER’S MANUAL LCD TV / LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.com TV_CD 210X280.
CONTENTS Programme Edit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 44 PREPERATION LCD TV Models : 32/42LD5** - - - - - - - - - - - - - - - - - - - - - - - - 3 LED TV Models : 32/37/42/47LE5*** - - - - - - - - - - - - - - - - - 10 Software Update - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 46 Manual Update (In Digital Cable Mode Only) - - - - - - - - -
contents PICTURE CONTROL TIME SETTING CONTENTS Picture Size (Aspect Ratio) Control - - - - - - - - - - - - - - - - - - - 83 Clock Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 107 Energy Saving - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 85 Auto On/Off Time Setting - - - - - - - - - - - - - - - - - - - - - - - - 108 Preset Picture Settings
PREPERATION LCD TV Models : 32/42LD5** Accessories ENERGY AV MODE INPUT TV/ RAD SAVING 1 2 3 4 5 6 7 LIST 8 9 0 Q.VIEW MARK FAV RATIO P P A G E MUTE MENU GUIDE Q.MENU OK Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. BACK ■ Image shown may differ from your TV INFO EXIT ADD APP/* ENERGY SAVING 1 ENERGY ENERGY AV MODE INPUT SAVING ENERGY SAVING 3 5 6 7 8 9 0 Q.
Preparation Front Panel Controls NOTE : ► ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. CAUTION : Preparation ► Do not step on the glass stand or subject it to any impact.
Back Panel Information Image shown may differ from your TV. USB IN ■ CABLE MANAGEMENT IN4 Preparation AC IN VIDEO L/MONO AUDIO R H/P AV IN 2 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI(VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
AC IN Preparation CABLE MANAGEMENT Stand Installation AC IN ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Back Cover for Wire Arrangement ■ Image shown may differ from your TV. ➊ Connect the cables as necessary.
Attaching the TV to a Desk ■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. Not Using the Desk-Type Stand ■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Insert the Protection Cover into the TV until clicking sound.
Preparation Kensington Security System Careful Installation Advice ■ ■ ■ You should purchase necessary components to fix the TV safety and secure to the wall on the market. ■ Position the TV close to the wall to avoid the possibility of it falling when pushed. ■ The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
NOTE ► ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally. ► ► Earthing ► Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. ► Power Supply Preparation Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
ENERGY AV MODE INPUT TV/ RAD SAVING 1 2 3 4 5 6 7 LIST Preparation 8 9 0 Q.VIEW MARK FAV P RATIO ENERGY P A G E GUIDE AV MODE TV/ RAD Q.MENU 1 2 3 4 5 6 7 OK LIST BACK INPUT SAVING MUTE MENU 8 9 0 Q.VIEW MARK FAV EXIT INFO P A G E P RATIO MUTE LED TV Models : 32/37/42/47LE5*** Accessories MENU GUIDE BACK INFO Q.MENU ADD APP/* OK EXIT ADD APP/* Ensure that the following accessories are included with your TV.
Front Panel Controls NOTE : ► ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. CAUTION : ■ Image shown may differ from your TV.
Preparation Back Panel Information Image shown may differ from your TV. USB IN ■ Preparation CAUTION ► Use a product with the following thickness for optimal connection to HDMI cable (Only HDMI IN 4) /USB device. *A≤10 mm HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI(VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component.
Stand Installation ■ Back Cover for Wire Arrangement Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. ■ Image shown may differ from your TV. ➊ Secure the power cord with the Cable Holder on the TV back cover.
Preparation Swivel Stand ■ Wall Mount : Horizontal Installation Image shown may differ from your TV. After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position. ■ We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. ■ We recommend that you purchase a wall mounting bracket which supports VESA standard. ■ LG recommends that wall mounting be performed by a qualified professional installer.
Careful Installation Advice ■ ■ ■ You should purchase necessary components to fix the TV safety and secure to the wall on the market. ■ Position the TV close to the wall to avoid the possibility of it falling when pushed. ■ The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage.
EXTERNAL EQUIPMENT SETUP To prevent damage do not connect to the mains outlet until all connections are made between the devices. ■ This section mainly uses diagrams for the 32/42LD5** models. USB IN ■ Antenna Connection For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD Receiver Setup ■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
EXTERNAL EQUIPMENT SETUP Connecting with an HDMI Cable ➊ Connect the digital set-top box to HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3 or HDMI IN 4 jack on the TV. ➋ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ➌ Select HDMI1, HDMI2, HDMI3 or HDMI4 input source using the INPUT button on the remote control. NOTE EXTERNAL EQUIPMENT SETUP ► Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI version 1.
DVD Setup Connecting with a Component Cable ➊ Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV. ➋ Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV. ➌ Turn on the DVD player, insert a DVD. ➍ Select Component input source using the INPUT button on the remote EXTERNAL EQUIPMENT SETUP control. ➎ Refer to the DVD player’s manual for operating instructions.
EXTERNAL EQUIPMENT SETUP Connecting with a Euro Scart Cable ➊ ➋ ➌ ➍ Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the TV. Turn on the DVD player, insert a DVD. Select AV1 input source using the INPUT button on the remote control. Refer to the DVD player’s manual for operating instructions. NOTE ► Any Euro scart cable used must be signal shielded. ► Copy-protected programmes will not be output on the EURO scart sockets for legal reasons.
VCR Setup To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connecting with a RF Cable ➊ Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV. ➋ Connect the terrestrial antenna cable to the ANT IN socket of the VCR. ➌ Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
EXTERNAL EQUIPMENT SETUP Connecting with a Euro Scart Cable ➊ Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the TV. ➋ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ➌ Select AV1 input source using the INPUT button on the remote control. NOTE ► Any Euro Scart cable used must be signal shielded. ► Copy-protected programmes will not be output on the EURO scart sockets for legal reasons.
- To view the encrypted (pay) services in digital TV mode. USB IN Insertion of CI Module - This feature is not available in all countries. ➊ ► Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. H/P NOTE Check this point as shown and insert the CI Module. EXTERNAL EQUIPMENT SETUP VIDEO L/MONO AUDIO R Association) CARD SLOT of TV as shown.
EXTERNAL EQUIPMENT SETUP USB IN Other A/V Source Setup Camcorder Video Game Set R IN4 L H/P VIDEO L/MONO AUDIO R EXTERNAL EQUIPMENT SETUP VIDEO ➊ AV IN 2 ➊ Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) ➋ Select AV2 input source using the INPUT button on the remote control. ➌ Operate the corresponding external equipment. (Refer to external equipment operating guide.
PC Setup This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV’s settings. Connecting with a D-sub 15 pin Cable ➊ ➋ ➌ ➍ Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV. Select RGB input source using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution RGB(PC), HDMI1(DVI) -PC mode HDMI1, HDMI2, HDMI3, HDMI4 -DTV mode EXTERNAL EQUIPMENT SETUP Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.08 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 60.00 1280 x 768 47.78 59.87 1360 x 768 47.72 59.80 1280 x 1024 63.98 60.02 1400 x 1050 65.317 59.979 1920 x 1080 66.587 59.
ENERGY SAVING ENERGY SAVING Q.VIEW LIST AV MODE ENERGY 1 2 3 4 5 6 7 8 9 AV MODE TV/ RAD P A G E P ENERGY TV/ RAD INPUT AV MODE INPUT SAVING ENERGY AV MODERGBQ.VIEW LIST (In Screen Setup for PC mode mode only) 0 ENERGY 2 3 5 6 8 9 LIST MARK FAV 0 2 1 5 6 9 1 2 3 4 5 6 7 8 9 5 6 7 8 9 MARK 0 FAV MARK 0 GUIDE FAV 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV MENU LIST 0 LIST RATIO MARK Q.MENU FAV MARK MARK FAV LIST FAV MARK Q.
ENERGY SAVING ENERGY AV MODE INPUT SAVING Q.VIEW LIST ENERGY 1 2 3 5 6 8 9 3 5 6 8 9 LIST MARK FAV MENU EXTERNAL EQUIPMENT SETUP MARK 0 GUIDE FAV LIST MARK FAV MARK GUIDE FAV MARK FAV GUIDE MENU 9 0 ENERGY SAVING LIST AV MODE P P AG ENERGYE INPUT Q.VIEW INPUT SAVING P INPUT TV/ RAD P A G E INPUT TV/ RAD AV MODE TV/ RAD INPUT P TV/ RAD P A G E TV/ RAD TV/ RAD SAVINGthe display. This is recommended for the first time connecting to a PC.
AV MODE INPUT ENERGY SAVING ENERGY AV MODE ENERGY SAVING Q.VIEW LIST 1 4 2 3 5 6 8 9 0 2 3 5 6 8 9 1 2 3 5 6 4 5 6 7 7 8 9 MENU LIST 0 LIST RATIO MARK Q.MENU FAV Q.VIEW MARK 1 2 MARK FAV 4 5 LIST FAV7 8 MARK Q.MENU 0 FAV GUIDE 1 AV MODE MUTE FAV LIST Q.VIEW SAVING Q.VIEW 3 6 9 3 FAV LIST Q.VIEW RATIO RATIO MARK AVFAV MODE P TV/ RAD P A G E TV/ RAD P ENERGY Q.
AV MODE INPUT ENERGY SAVING EXTERNAL EQUIPMENT SETUP ENERGY ENERGY SAVING Q.VIEW LIST AV MODE ENERGY 1 4 2 3 8 9 SAVING 5 6 7 0 Screen Reset ENERGY 2 3 5 6 8 9 LIST MARK FAV 3 5 6 8 9 LIST MARK FAV MENU EXTERNAL EQUIPMENT SETUP MARK 0 GUIDE FAV LIST MARK FAV MARK GUIDE FAV MARK FAV GUIDE MENU LIST AV MODE SAVING ENERGY RATIO LIST 1 2 3 4 5 6 7 SAVING 8 9 Q.VIEW 0 LIST RATIO MARK Q.MENU FAV Q.VIEW MARK 1 2 3 FAV 4 5 6 7 8 9 RATIO MARK Q.
WATCHING TV/PROGRAMME CONTROL Remote Control Key Funtions When using the remote control, aim it at the remote control sensor on the TV. ENERGY AV MODE INPUT TV/ (POWER) Switches the TV on from standby or off to standby. RAD SAVING ENERGY SAVING Adjust the Energy Saving mode of the TV. ( p.85) ENERGY AV MODE INPUT 1 TV/ RAD 2 3 4 5 6 7 8 9 AV MODE It helps you select Pand set images and sounds when Q.VIEW P A G E LIST connecting AV devices.(►p.
WATCHING TV / PROGRAMME CONTROL VOLUME Adjusts the volume. UP/DOWN ENERGY AV MODE FAV Displays the selected favourite programme. INPUT TV/ RAD MARK Check and un-check programmes in the USB menu. SAVING 1 RATIO Select your desired Aspect Ratio of picture. ( p.83) 2 3 WATCHING TV / PROGRAMME CONTROL 4 5 6 7 8 9 LIST 0 Q.VIEW MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one.
Turning On The TV - When your TV is turned on, you will be able to use its features. ➊ Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. (The power indicator on the TV illuminates red.) ENERGY AV MODE INPUT TV/ on the TV or press the , INPUT or P∧∨ (Programme Up/Down) button RAD P∧∨ or NUMBER button on the remote control and SAVING the TV will switch on. ➋ In standby mode to turn TV on, press the Initial Setting 1 4 7 2 3 5 6 8 9 1 LIST Q.
WATCHING TV / PROGRAMME CONTROL CI+ CAM ➊ Start-up Process When switching on your TV set the message “Scrambled Programme” appears: ► The “Scrambled Programme” message may appear if your TV is switched on from standby to a Pay TV channel. ► The TV’s start-up process may take longer due to the enhanced security for CI+ compared to a Free-to-Air channel.
➋ CI+ CAM Authentication When CI+ CAM (Conditional Access Module) is inserted for the first time Authentication Success Authentication Start Audio/Video Display Authentication Failed Authentication OK WATCHING TV / PROGRAMME CONTROL When the CI+ CAM is inserted for the first time 1. When the authentication is failed, an error message appears. 2. Check whether - The antenna is connected correctly. - The channel search is complete. - The current channel is digital. 3.
WATCHING TV / PROGRAMME CONTROL Quick Menu Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio Audio Selects your desired picture format. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in the Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu. Selects the sound output. Energy Saving Sleep Timer ENERGY Selects your desired Energy Saving mode.
On Screen Menus Selection and Adjustment Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. ENERGY AV MODE INPUT ENERGY SAVING TV/ RAD AV MODE INPUT Q.VIEW LIST P 1 2 3 4 5 6 7 8 9 P AG ENERGYE RATIO 1 2 3 4 5 6 7 8 9 AV MODE INPUT P P A G E SAVING 0 MARK FAV Q.VIEW LIST TV/ RAD MUTE MARK FAV LIST MARK FAV Q.VIEW RATIO MUTE P P A G E 0 WATCHING TV / PROGRAMME CONTROL TV/ RAD SAVING Q.
ENERGY AV MODE INPUT WATCHING TV / PROGRAMME CONTROL ENERGY SAVING AV MODE INPUT Auto Programme Tuning ENERGY AV MODE SAVING 5 6 9 WATCHING TV / PROGRAMME CONTROL 6 9 0 6 AV MODE LIST SAVING ENERGY RATIO LIST 1 2 3 4 5 6 7 1 3 6 9 GUIDE 5 5 Q.VIEW If you wish to select the Antenna, LIST MARK FAV 8 Q.VIEW INPUT P 2 3 4 5 6 7 8 9 SAVING Q.VIEW MARK FAV LISTSAVING 8 9 Q.VIEW 0 RATIO LIST MARK Q.MENU 0 FAV LIST Q.
ENERGY AV MODE SAVING Q.VIEW LIST 1 7 3 5 6 8 9 1 2 3 Q.VIEW 4 5 6 1 2 3 4 5 6 7 8 9 Q.VIEW 0 ENERGY RATIO LIST MARK Q.MENU 0 SAVING FAV Q.VIEW MARK 1 2 3 FAV 4 5 6 ENERGY 7 9 2 3 5 6 8 9 8 RATIO 9 3 1GUIDE 2 3 9 7 3 1 Q.VIEW 5 6 8 9 Q.VIEW ENERGY ENERGY AVP MODE P AGE RATIO INPUTAV MODE MUTE GUIDE SAVING Q.VIEW AVRATIO MODE P A G E P LIST MUTEQ.VIEW Q.VIEW Q.MENU GUIDE Select SETUP.
Q.MENU GUIDE GUIDE Q.MENU WATCHING TV / PROGRAMME CONTROL 8 9 Select Start. OK OK BACK BACK Run Auto Tuning. The search INFO results will appear.EXIT The found programmes are automatically saved in order. INFO EXIT • If you have selected On in LOCK > Lock System menu, you will be prompted to enter your password to access. Use NUMBER buttons to input a 4-digit password. WATCHING TV / PROGRAMME CONTROL GB-40 • Press the MENU/EXIT button to return to normal TV viewing.
ENERGY SAVING ENERGY LIST AV MODE Q.VIEW AV MODE 2 3 5 6 8 9 0 MARK 2 3 GUIDE AV MODE FAV 5 6 8 9 0 2 3 RATIO LIST 1 4 MENU 7 1 2 3 4 5 6 7 8 9 2 3 5 6 INPUT 8 7 8 9 9 RATIO MARK Q.MENU 0 INPUT FAV LIST MARK 1 2 3 FAV 4 5 6 8 P 9 P A G E MARK Q.MENU 0 FAV P A G E P FAV MENU MARK FAV MENU OK GUIDE MENU MUTE P 3 SAVING AV MODE INPUT P MARK ENERGY FAV Q.VIEW LIST Q.VIEW TV/ RAD MUTE RATIO Q.
TV/ RAD ENERGY SAVING AV MODE INPUT TV/ RAD WATCHING TV / PROGRAMME CONTROL ENERGY INPUT ENERGY SAVING Q.VIEW LIST AV MODE SAVING AV MODE P P AG ENERGYE TV/ RAD INPUT TV/ RAD AV MODE INPUT ManualSAVING Programme Tuning (In Analogue Mode) P LIST Q.VIEW 1 2 3 4 5 6 7 8 9 P A G E SAVINGthe stations in whatever order you desire. ENERGY Manual Tuning lets you manually tune and arrange AV MODE INPUT P P AGE Q.
5 6 8 9 MARK 0 FAV 1 2 3 4 5 6 7 8 9 MENU 0 MARK GUIDE FAV MENU MARK FAV LIST MARK FAV LIST MARK GUIDE FAV MARK FAV ■ MENU LIST 2 3 5 6 8 9 0 AV MODE 1 2 3 4 5 6 7 8 9 MARK 0 FAV MARK FAV RED MUTE MENU BACK P MUTE Q.MENU MARK RATIO FAV P P A G E RATIO GUIDE AVRATIO MODE MENU SAVING ENERGY INPUT MUTE Q.VIEW INPUT Q.MENU SAVING LIST OK RATIO MARK FAV 4 P P A G E MARK FAV Fine Tuning GUIDE P TV/ RAD BACK INFO TV/ RAD Q.VIEW Select Close.
ENERGY SAVING TV/ RAD AV MODE INPUT TV/ RAD WATCHING TV / PROGRAMME CONTROL ENERGY LIST AV MODE ENERGY SAVING Q.VIEW INPUT AV MODE SAVING Programme EditLIST 1 2 3 4 5 6 7 8 9 SAVING TV/ RAD INPUT P P AG ENERGYE Q.VIEW AV MODE TV/ RAD INPUT P This function enables you to delete, move or skipSAVING the programmes you want. 0 2 3 5 6 8 9 LIST MARK FAV Q.VIEW RATIO LIST 0 1 2 3 4 5 6 7ENERGY 8 9 MARK FAV MARK GUIDE FAV RATIO SAVING MARK Q.
MARK MARK FAV FAV MARK MARK FAV FAV MENU MENU RATIO RATIO Q.MENU Q.MENU GUIDE GUIDE RED ENERGY YELLOW MENU MENU ■ 5 6 7 8 9 1 GREEN AV MODE TV/ RAD GUIDE GUIDE Q.VIEW LIST P 0 Select a programme you want to skip. OK 2 GREEN MARK FAV BLUE OK ENERGY MARK RATIO FAVprogramme number Turn the SAVING to blue. OK OK 3 1 2 3 MENU 7 8 Release. Q.VIEW Q.
ENERGY AV MODE INPUT ENERGY SAVING TV/ RAD AV MODE INPUT WATCHING TV / PROGRAMME CONTROL ENERGY LIST AV MODE INPUT ENERGY AV MODE Q.VIEW Software Update SAVING ENERGY 1 2 3 SAVING 4 5 6 TV/ RAD SAVING TV/ RAD INPUT P A G E P ENERGY AV MODE TV/ RAD INPUT P A G E AV MODE INPUT P LIST Q.VIEW TV/ Software Update allows 7 8 9 you to update the system software to maintain proper performance of the product. TV/ 2 3 5 6 8 9 LIST MARK FAV 0 SAVING broadcasting system.
ENERGY AV MODE INPUT ENERGY SAVING ENERGY LIST AV MODE ENERGY AV MODE INPUT TV/ RAD SAVING INPUT AV MODE TV/ RAD TV/ RAD INPUT P Q.VIEW Manual Update (In Digital Cable Mode Only) TV/ ENERGY RAD SAVING 1 2 SAVING P A G E 3 AV MODE 4ENERGY 5 6 INPUT P A G E AVLIST MODE INPUT TV/ Manual Update allows to update manually the systemQ.VIEW software to maintain proper performancePof the product. 7 8 you 9 0 SAVING broadcasting system.
WATCHING TV / PROGRAMME CONTROL * When detecting new software ➊ When you turn on the TV after new software is detected, the software update message will be displayed. ➋ Select Yes using the <> button and press the OK button to start the software update. • Select No and press the OK button to return to the previous menu without updating. ➌ The system restarts automatically and the update is started. WATCHING TV / PROGRAMME CONTROL GB-48 The progress status is displayed. Please wait until it is complete.
ENERGY AV MODE INPUT ENERGY SAVING ENERGY LIST AV MODE ENERGY SAVING Q.VIEW Diagnostics 1 2 3 SAVING 5 6 AV MODE INPUT TV/ RAD SAVING INPUT AV MODE TV/ RAD P A G E P ENERGY TV/ RAD INPUT AV MODE TV/ RAD INPUT P A G E P Q.VIEW TV/ 7 you 8 9to view system status information such as Manufacturer, Model/Type, Update Date, Software Version, CI+ This function enables 4 LIST 0 Version, Micom Version,SAVING Software Version, Loader Host ID/Binded CAM ID, Strength, or Quality.
WATCHING TV / PROGRAMME CONTROL CI Information (In Digital Mode Only) This function enables you to watch some encrypted digital terrestrial services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. ENERGY AV MODE INPUT To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV/ ENERGYinserting RAD a CI Module, TV. This may cause a malfunction.
RED 1 2 ENERGY ADD APP/* ADD SAVING APP/ AV MODE TV/ RAD * 3 LIST Q.VIEW Selecting the Programme List ADD APP/* RED INPUT 4 5 6 7 8 9 P P A G E 0 Various groups of programme lists are available for quick and easy navigation. Colour Button YELLOW RED YELLOW Group MARK FAV My TV ADD APP/* MARK FAV RATIO Programmes MUTE Display the list of all TV or Radio programmes. RED GREEN Favourite MENU Display the list of all favourite Q.MENUprogrammes.
SAVING 0 ENERGY ENERGY AV MODE WATCHINGLIST TV / PROGRAMME CONTROL Q.VIEW MARK FAV 1 2 3 4 5 6 7 8 9 0 MARK FAV SAVING INPUTAV MODE RATIO SAVING MUTE INPUT ENERGY 1 2 3 6 INPUT TV/ RAD ENERGY AV MODEby a detect pin and INPUTthus enabled only when an external device approves voltage. HDMI and AV1, 2 (SCART) can be recognized LISTMENU MARK Q.
RAD SAVING ENERGY ENERGY SAVING Q.VIEW LIST AV MODE 1 2 3 SAVING 4 5 6 Input Label ENERGY 7 8 0 2 LIST MARK FAV 3 5 6 8 9 RATIO LIST 1 0 2 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV 1 2 3 4 5 6 7 8 9 MENU 2 3 4 5 6 7 8 9 MENU LIST RATIO MARK Q.MENU FAV MARK FAV LIST MARK Q.MENU FAV SAVING P A G E TV/ RAD 1 2 3 SAVING Q.VIEW RATIO P P A G E TV/ RAD TV/ RAD P A G E RATIO P MUTE INPUT INPUT P MARK AV MODE FAV Q.
ENERGY AV MODE INPUT TV/ RAD SAVING WATCHING TV / PROGRAMME CONTROL 2 3 5 6 8 9 ENERGY Multifeed SAVING Q.VIEW LIST 0 AV MODE INPUT * This function is available only in Germany. P P A G E OK TV/ RAD INFO BACK EXIT When turning to a multifeed channel, the multifeed icon will appear on the programme information banner.
ENERGY AV MODE INPUT ENERGY SAVING ENERGY LIST AV MODE TV/ RAD AV MODE INPUT TV/ RAD SAVING INPUT TV/ ENERGY Initializing (ResetAV to factory settings) RAD MODE original INPUT SAVING Q.VIEW P P AG ENERGYE This function initializes all settings. SAVING ENERGY 1 2 3 AV MODE TV/ RAD INPUT AV MODE INPUT LIST Q.VIEW It is useful to initialize 7 the 8 9product or when you move to other city or country.
SAVING 1 2 4 5 6 LIST 7 8 3 1 2 3 4 5 6 7 8 9 TO USE A USB DEVICE LIST Q.VIEW 9 0 RAD RAD SAVING 0 Q.VIEW LIST P P A G E 1 2 3 4P 5AG 6 8 9 P E 7 Q.VIEW SAVING P ENERGY LIST AV MODE Q.VIEW INPUT P A G E TV/ RAD When you connect a USB device, this pop up menu is displayed, automatically. SAVING 0 “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated.
Precautions when using a USB device ► ► ► ► ► ► ► ► ► ► ► ► ► ► ► ► ► ► ► ► ► TO USE THE USB DEVICE ► ► ► Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable. A USB storage device using an automatic recognition programme may not be recognized. A USB storage device which uses its own driver may not be recognized. The recognition speed of a USB storage device may depend on each device.
1 2 3 4 5 6 7 8 9 1 4 LIST 7 0 Photo List 1 2 5 7 8 3 1 6 4 MARK 9 FAV 7 0 2 3 5 6 3 5 6 8 9 ENERGY LIST Q.VIEW SAVING 0 TO USE A USB DEVICE 4 2 ENERGY 0 Q.VIEW INPUT AV MODE P P A G E SAVING AVMARK MODE LIST Q.VIEWRATIO FAV Q.VIEW MARK MARK LIST FAV FAV 8 9 You can view photo files on USB storage device.
ENERGY SAVING INPUT AV MODE ENERGY SAVING Q.VIEW LIST 1 2 TV/ RAD P 3 4 5 6 7 8 9 Photo Selection P A G E Q.VIEW LIST TV/ RAD AV MODE SAVING INPUT P TV/ RAD P A G E 0 Q.VIEW LIST MARK FAV RATIO MARK FAV MARK FAV P 1 2 3 4 5 6 7 8 9 0 RATIO Q.MENU GUIDE MUTE P A G E Q.VIEW LIST MARK FAV Mark Mode RATIO P P A G E MUTE MUTE MARK FAV MENU MARK FAV RATIO MUTE Q.MENU GUIDE Q.MENU GUIDE MENU 1 Select the target folder or drive.
INPUT ADD APP/* ADD APP/* ADD APP/* TO USE RED A USB DEVICE TV/ RAD REDthe remote control Using P P A G E Photo List Photo List (Mark Mode) YELLOW RED YELLOW Not available. Unmark all marked photo files. RED GREEN YELLOW GREEN YELLOW 2 3 5 6 7 8 9 TO USE THE USB DEVICE 1 4 0 MARK FAV INFO MENU BLUE LIST GREEN BLUE ENERGY Convert to Movie List. AV MODE Mark all photo files on the screen. INPUT TV/ RAD SAVING Convert to Music List. Display the marked photo file(s). Q.
ENERGY AV MODE INPUT ENERGY LIST 2 INPUT TV/ RAD SAVING INPUT AV MODE TV/ RAD ENERGY SAVING HowQ.VIEW To View Photo 1 TV/ AV RAD MODE ENERGY SAVING P 3 P A G E AV MODE SAVING Detailed4 operations are available on full-sized photo view screen. 5 6 7 8 Q.VIEW LIST 9 INPUT P TV/ RAD P A G E 0 Q.VIEW LIST MARK FAV RATIO MARK FAV MARK FAV P 1 2 3 4 5 6 7 8 9 0 RATIO Q.MENU GUIDE P A G E Q.
TO USE A USB DEVICE MENU Q.MENU GUIDE 4 OK Select the Slideshow , BGM, (Zoom In),INFO (Rotate), Option, BACK Hide, or Exit. • Use < > button to selectOK the previous or next photo. INFO BACKthe menu on the full• Use ⋁ < > and OK button to select and control sized screen. u Slideshow: When no picture is selected, all photos in the current folder are ADD APP/* TO USE THE USB DEVICE displayed during slide show. If some photos are selected, those photos are displayed in a slide show.
1 2 3 1 2 3ENERGY 4 5 6 4 5 6 7 8 9 7 8 9 LIST 0 Music List 1 2 3 4 5 6 7 8 9 0 MARK FAV SAVING Q.VIEW INPUT AV MODE P P A G E SAVING INPUT TV/ RAD P A G E P TV/ RAD ENERGY 1 2 3 4 5 6 7 8 9 LIST LIST Q.VIEW ENERGY AV MODE AV MODE MARK INPUT MARK MARK LIST RATIO FAV FAV Q.VIEW FAV Q.VIEW MUTE RATIO P P A G E P TV/ MUTE RAD 0 SAVING You can play music files0 on USB storage device. P A G E Purchased music files(*.
SAVING ENERGY LIST AV MODE TO USE Q.VIEWA USB DEVICE SAVING 1 2 3 4 5 6 7 8 9 TV/ RAD ENERGY P P A G E Q.VIEW LIST Music Selection TV/ RAD SAVING INPUT AV MODE SAVING INPUT P TV/ RAD P A G E 0 Q.VIEW LIST MARK FAV RATIO MARK FAV MARK FAV P 1 2 3 4 5 6 7 8 9 0 RATIO Q.MENU GUIDE P A G E Q.VIEW LIST MUTE MARK FAV Mark Mode RATIO P P A G E MUTE MUTE MARK FAV MENU MARK FAV RATIO MUTE Q.MENU GUIDE Q.MENU GUIDE MENU 1 TO USE THE USB DEVICE 2 Q.
ADD APP/* ADD APP/* ADD APP/* INPUT TV/ RAD RED REDthe remote control Using P P A G E Music List Music List (Mark Mode) YELLOW RED YELLOW Not available. Unmark all marked music files. RED GREEN YELLOW GREEN YELLOW 2 3 5 6 7 8 9 0 BLUE LIST GREEN BLUE Mark all music files on the screen. INPUT TV/ RAD SAVING Convert to Photo List. Play the marked music file(s). Q.VIEW P P A G E A method to view in 5 large thumbnail or simple list.
ENERGY LIST AV MODE ENERGY TO USE Q.VIEWA USB DEVICE SAVING 1 2 3 4 5 6 7 8 9 SAVING ENERGY AV MODE AV MODE LIST TV/ RAD SAVING INPUT How to PlaySAVING Music P TV/ RAD INPUT P A G E TV/ RAD Q.VIEW INPUT TV/ RAD 0 2 3 5 6 8 9 0 2 3 5 6 8 9 0 LIST MARK FAV Q.VIEW RATIO LIST MARK FAV LIST MARK FAV MARK GUIDE FAV MARK FAV MARK Q.MENU FAV 5 6 7 8 9 MARK FAV ENERGY RATIO RATIO P A G E P P A G E AV MODE MUTE TV/ RAD Q.MENU LIST MUTE Q.
Q.VIEW TV/ RAD ENERGY P P AG AV MODEE SAVING P P A G E RATIO RED Q.MENU MARK 1 FAV 2 3 4 5 6 7 8 9 TV/ RAD ADD APP/* Using the remote control MUTE Q.VIEW n LIST INPUT II tt/ RATIO LIST YELLOW ENERGY Stop the playback. P P AG AV MODEE INPUT TV/ RAD Return to normal playback. SAVING Pause or resume the playback. Play the previous/next music file. MUTE Convert to Photo List to view the photos while playing music. P Q.
TO USE A USB DEVICE ■ If you don’t press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. NOTE ► A damaged or corrupted music does not play but displays 00:00 in playtime. ► A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
Movie List You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.mp4/*.
7 8 FAV 9 FAV 0 TO USE A USBMARK DEVICE MARK FAV MENU MENU GUIDE RATIO FAV Q.MENU GUIDE MUTE Q.MENU Screen Components 1 MENU ➋ ➌ ➍ GUIDE 2 Q.MENU Select MY MEDIA. BACK Moves to upper level folder OK ➊ Current page/Total pages Corresponding buttons on the remote control OK OK Select INFO Movie List.
ENERGY AV MODE ENERGY SAVING AV MODE Q.VIEW LIST 1 2 3 4 5 6 7 8 9 SAVING TV/ RAD SAVING INPUT P P A G E TV/ RAD INPUT TV/ RAD Q.VIEW LIST Movie Selection P P A G E 0 2 3 5 6 8 9 LIST MARK FAV Q.VIEW RATIO LIST MARK FAV 0 MARK FAV MARK GUIDE FAV P Q.VIEW RATIO MARK Q.MENU FAV Mark Mode P MUTE MARK FAV P A G E RATIO MUTE MUTE RATIO MENU MUTE Q.MENU GUIDE Q.MENU GUIDE MENU P A G E Q.MENU GUIDE 1 OK BACK Select the desired INFO movie title.
INPUT ADD APP/* ADD APP/* ADD APP/* TO USE RED A USB DEVICE TV/ RAD REDthe remote control Using P P A G E Movie List Movie List (Mark Mode) YELLOW RED YELLOW Not available. Unmark all marked movie files. RED GREEN YELLOW GREEN YELLOW 2 3 5 6 7 8 9 TO USE THE USB DEVICE 1 4 0 MARK FAV INFO MENU BLUE LIST GREEN BLUE ENERGY Convert to Photo List. AV MODE Mark all movie files on the screen. INPUT TV/ RAD SAVING Convert to Music List. Play the marked movie file(s). Q.
How to Play Movie ENERGY AV MODE INPUT ENERGY ENERGY SAVING 1 2 3 4 5 6 7 8 9 0 2 3 6 9 0 2 3 5 6 8 9 0 MARK GUIDE FAV MARK FAV MENU MENU RED Q.VIEW LIST LIST MARK FAV AV MODE RATIO MARK FAV SAVING Q.VIEW Q.VIEW RATIO MARK Q.MENU FAV MARK FAV 5 6 7 8 9 MARK FAV TV/ RAD INPUT P A G E TV/ RAD Q.VIEW INPUT TV/ RAD P A G E MUTE ENERGY RATIO P P A G E P P A G E AV MODE MUTE P P A G E INPUT TV/ RAD SAVING RATIO MUTE Q.
ENERGY Q.VIEW P AV MODE P AG E INPUT TV/ RAD SAVING P P A G E TO USE A USB DEVICE RATIO LIST MUTE P Q.VIEW Using the remote control while playingINPUT ENERGY AV MODE Q.MENU MARK FAV 1 2 3 4 5 6 7 8 9 Stop the playback. Return to normal playback. tt/ LIST 0 Q.MENU MARK FAV TV/ RAD n II RATIO GUIDE P A G E MARK FAV SAVING Pause or resume the playback. MUTE • Press the II button and then use the tt/ button for slow motion. Fast forward or rewind. P Q.
ENERGY AV MODE INPUT ENERGY SAVING DivX Registration Code ENERGY AV MODE INPUT AV MODE INPUT TV/ RAD SAVING ENERGY LIST TV/ RAD TV/ AV MODE INPUT Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx. RAD ENERGY 1 2 3 P Q.VIEW TV/ AV MODE INPUT com/vod.SAVING 4 5 6 RAD P A G E LIST SAVING 8 9 Q.VIEW With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
ENERGY AV MODE TO USE A USB DEVICE INPUT ENERGY SAVING TV/ RAD AV MODE INPUT TV/ RAD SAVING ENERGY Deactivation AV MODE ENERGY LIST 3 5 6 8 9 LIST MARK FAV Q.VIEW SAVING 1RATIO 2 3 LIST 0 4 5 6 7 8 9 ENERGY P A G E INPUT P Q.VIEW MARK MUTE LIST FAV P A G E P A G E AV MODE TV/ RAD P A G E P RATIO SAVING MARK FAV Q.
EPG (ELECTRONIC PROGRAMME GUIDE) (In Digital Mode) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
SAVING P Q.VIEW LIST RED SAVING P A G E EPG (ELECTRONIC PROGRAMME GUIDE) (InAPP/ Digital Mode) ADD * LIST LIST Q.VIEW Q.VIEW MARK FAV ENERGY 1 2 3 1 2 3 4 5 6 4 5 6 7 8 9 7 8 9 0 RATIO SAVING 0 ENERGY MUTE 2 3 4 5 6 8 9 7 P P TV/AGE RAD ADD AV MODE P A G E P APP/* INPUT SAVING TV/ You can view a programme being broadcasted and one scheduledRAD to follow.
* ENERGY SAVING P RED Q.VIEW LIST ENERGY AV MODE ENERGY P A G E MARK FAV 1 2 3 1 2 3 5 6 4 5 6 7 8 9 7 8 9 0 YELLOW RATIO ENERGY RED YELLOW 1 2 3 4 5 6 7 8 9 0 1 GUIDE 4 7 LIST MARK FAV MARK SAVING RED LIST FAV 2 3 5 6 8 9 0 MARK FAV MARK FAV MENU GUIDE AV MODE MUTE INPUT MARK MARK Q.VIEW FAVFAV MARK RATIO FAV TV/ RAD ENERGY P A G E P MUTERATIO GREEN BLUE RATIO GUIDE GREEN OK GUIDE 1 2 3 7 8 9 MENU EnterGUIDE Schedule mode Q.
E MARK FAV AV MODE MARK FAV RATIO INPUT EPG (ELECTRONIC PROGRAMME GUIDE) (In Digital Mode) YELLOW 2 U 4 5 UIDE 8 3 6 9 P GUIDE P A G E Q.MENU LIST ENERGY GREEN Q.VIEW Switch off Date setting mode. or AV MODE MARK BLUE Q.VIEW OK MENU EPG (ELECTRONIC PROGRAMME GUIDE) ADD BACK 1 2 3 5 6 7 BACK 8 9 0 MARK FAV RED OK OKGUIDE or INFO RATIO EXIT Switch off EXIT EPG.
SAVING Q.VIEW LIST P ENERGY AV MODE INFO BACK EXIT P A G E INPUT TV/ ENERGY ENERGY RAD Button Function AVin Setting Mode AV MODE INPUT MODE Remind INPUT SAVING MARK FAV TV/ RAD Sets a start timeSAVING for the SAVING reminder. RATIO 3 1 2 3 5 6 9 7 8 9 0 GUIDE MARK FAV K MARK FAV GUIDE MENU LIST LIST TV/ RAD MUTE ADD P Q.VIEW LIST 6 4 U OK APP/* P A G E Q.VIEW Q.VIEW P P A G E P P A G E Q.MENU RED RATIO MARK MARK FAV FAV MUTE RATIO RATIO Q.
3 6 9 K ADD ENERGY AV MODE INPUT AV MODE INPUT APP/* EPG (ELECTRONIC PROGRAMME GUIDE) (In Digital Mode) ENERGY SAVING TV/ RAD OK TV/ RAD BACK SAVING INFO EXIT OK RED Button Function in Schedule List ModeINFO BACK ENERGY AV MODE P A G E EXIT INPUT P If you’ve is displayed at the scheduled time even when you are watching a different TV/ Q.VIEWcreated a schedule list, a scheduled programme RAD programme at the time. SAVING LIST Q.
Q.VIEW LIST LIST MARK FAV MARK FAV MARK FAV Q.VIEW P MARK FAV RATIO P G E P A G E MUTE PICTURE CONTROL RATIO MUTE Q.MENU GUIDE RATIO Picture Size (Aspect Ratio) Control MENU MUTE You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom1. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. GUIDE GUIDE Q.MENU 1 Q.
PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen.
AV MODE INPUT ENERGY SAVING ENERGY Q.VIEW AV MODE SAVING Energy Saving LIST 1 2 3 4 5 6 7 8 9 0 ENERGY 2 3 5 6 8 9 LIST MARK FAV It reduces the TV’s power consumption. AV MODE 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV MARK GUIDE FAV MENU TV/ RAD P A G E P ENERGY TV/ RAD INPUT Q.VIEW SAVING P A G E AV MODE TV/ RAD INPUT P P A G E TV/ RAD INPUT RATIO LIST 1 2 3 4 5 6 7 8 9 SAVING Q.VIEW P MUTE MARK FAV LIST MARK FAV Q.
ENERGY PICTURE CONTROL AV MODE INPUT TV/ RAD ENERGY SAVING AV MODE INPUT TV/ RAD Preset Picture Settings - Picture Mode AV MODE INPUT SAVING ENERGY TV/ RAD AV MODE INPUT SAVING Sensor Adjusts picture according APto the surrounding conditions. Intelligent P GE Q.VIEW Strengthen the contrast, brightness, colour and sharpnessTV/ for vivid picture. Vivid ENERGY 1 2 3 RAD AV MODE INPUT SAVING The most general screen display status.
ENERGY AV MODE INPUT ENERGY SAVING ENERGY LIST 2 3 5 6 8 9 ■ LIST MARK FAV ■ 5 6 8 9 MARK FAV MARK 0 GUIDE FAV LIST 2 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV MENU MARK FAV MENU MENU RED 1 ENERGY 2 P AG ENERGYE 3 SAVING 4 5 6 AV MODE To control the brightness of LCD AV MODEof the screen, INPUT the brightness LIST adjust Q.VIEW 7 8 9 panel. Adjusting the backlight when setting the brightness of TV/ the set is 0 SAVING ENERGY RAD recommended. AV MODE INPUT SAVING Q.
ENERGY AV MODE INPUT ENERGY PICTURE CONTROL SAVING ENERGY AV MODE TV/ RAD AV MODE INPUT TV/ RAD SAVING INPUT TV/ ENERGY RAD AV MODE INPUT Picture Improvement Technology SAVING P Q.VIEW LIST P A G 2 3 Q.VIEW LIST 7 value 8 9 differently for each input. You can set the video 3 5 6 8 9 LIST MARK FAV 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV 1 2 3 4 5 6 7 8 9 MARK 0 GUIDE FAV MENU P A G E RATIO LIST 1 2 3 4 5 6 7 8 9 PICTURE CONTROL MENU MENU SAVING Q.
Dynamic Contrast (Off/Low/Medium/High) ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture Dynamic Colour (Off/Low/High) ■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, Skin Colour (-5 to 5) ■ Expresses natural skin by detecting skin area of the video. Noise Reduction (Off/Low/Medium/High/Auto (In Analogue Mode Only)) ■ Reduces screen noise without compromising video quality.
PICTURE CONTROL PICTURE CONTROL GB-90 Colour Gamut (Advanced Control: Wide/Standard) • Standard : Mode to reproduce original colour according to the standard of input signal independent of the display characteristics. • Wide : Mode to use maximum colour area of the TV display. ■ Maximize the utilization for colour area that can be expressed. xvYCC (Auto/off/on) *This feature is not available for all models. ■ This is the function to express richer colour.
RAD SAVING ENERGY ENERGY SAVING Q.VIEW LIST AV MODE 1 2 3 SAVING 4 5 6 Picture Reset 7 8 9 2 3 5 6 8 9 MARK GUIDE FAV P ENERGY TV/ RAD INPUT Q.VIEW AV MODE TV/ RAD INPUT P SAVING P A G E TV/ RAD P A G E RATIO LIST 1 2 3 4 5 6 7 8 9 Q.VIEW P MUTE MARK FAV LIST MARK FAV Q.VIEW P A G E RATIO MUTE P P A G E 0 RATIO MARK Q.MENU FAV MARK FAV MUTE RATIO MUTE MENU MARK FAV GUIDE RATIO Q.MENU MUTE Q.
PICTURE CONTROL TruMotion ENERGY MODE without any motion INPUT It is used for the best pictureAVquality blur or judder when you enter a quick image or Film Source. ENERGY LIST 2 3 5 6 8 9 LIST MARK FAV MENU PICTURE CONTROL MARK GUIDE FAV MARK FAV GUIDE INPUT TV/ RAD P A G 1 2 ENERGYE 3 AV MODE SAVING ENERGY is disable 4 5 in6 RGB-PC,HDMI-PC This feature AV MODE INPUT LISTmode. Q.VIEW 7 8 9 If you enable “TruMotion”, noise may appear on the screen.
ENERGY AV MODE INPUT ENERGY SAVING ENERGY Power Indicator AV MODE TV/ RAD AV MODE TV/ RAD SAVING INPUT TV/ ENERGY It helps you adjust the brightness ofAVmoving LED whenINPUT power is RADturned on. MODE SAVING P P AGE Q.VIEW TV/ ENERGY RAD Standby Light 1 2 3 AV MODE SAVING 4 5 6 LIST INPUT INPUT LIST Q.VIEW Determines whether7 to8 set 9 the indicator light on the front of the TV to On or Off in standby mode.
ENERGY SAVING PICTURE CONTROL ENERGY LIST 2 3 5 6 8 9 LIST MARK FAV 3 5 6 8 9 LIST MARK FAV MARK 0 GUIDE FAV MARK FAV MARK GUIDE FAV MENU ENERGY SAVING Q.VIEW 2 3 4 5 6 7 8 9 LIST INPUT TV/ RAD P A G E P ENERGY TV/ RAD INPUT Q.VIEW INPUT AV MODE TV/ RAD INPUT TV/ 0 the TV to “Home Use” mode SAVING for the best picture ENERGY We recommend setting RAD in your home environment. AV MODE INPUT SAVING P P AGE at stores. Q.
ENERGY AV MODE INPUT ENERGY SAVING TV/ RAD AV MODE INPUT TV/ RAD SOUND & LANGUAGE CONTROL ENERGY LIST AV MODE ENERGY SAVING SAVING INPUT AV MODE P Q.VIEWVolume Leveler Auto ENERGY 1 2 P A G E 3 SAVING 4 5 6 TV/ RAD INPUT Q.VIEW LIST AV MODE TV/ RAD INPUT P AVL automatically remains on the same level of volume if you change programmes.
SOUND & LANGUAGE CONTROL Preset Sound Settings - Sound Mode ENERGY AV MODE INPUT You can select your preferred sound setting; Standard, Music, Cinema,TV/ Sport or Game and you can also adjust the frequency of the ENERGY RAD AV MODE INPUT equalizer.SAVING TV/ Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based RAD on the SAVING ENERGYcontent.
7 ENERGY SAVING Q.VIEW LIST AV MODE ENERGY 1 4 2 3 8 1 2 4 5 7 8 9 3 AV MODE 6 9 2 3 5 6 8 9 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV MARK GUIDE FAV MENU LIST 2 3 5 6 8 9 RATIO LIST 1 MENU 2 3 4 5 6 7 8 9 LIST RATIO ENERGY MARK Q.MENU FAV MARK SAVING FAV ENERGY MARK Q.MENU FAV SAVING GUIDE 1 Q.VIEW MENU GUIDE 2 Q.VIEW OK RATIO LIST 1 1 3 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 P A G E MUTE Q.
RAD SAVING ENERGY LIST AV MODE ENERGY Q.VIEW 1 2 3 8 9 SAVING 4 5 6 Balance 7 2 3 5 6 8 9 LIST MARK FAV MARK GUIDE FAV GUIDE MENU P A G E P ENERGY Q.VIEW LIST ENERGY 0 TV/ RAD INPUT SAVING P A G E AV MODE AV MODE RATIO LIST 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 Q.VIEW SAVING MUTE P MARK FAV LIST MARK FAV Q.VIEW LIST Q.VIEW TV/ RAD INPUT P P A G E TV/ RAD INPUT P preferred levels. You canQ.
ENERGY AV MODE INPUT ENERGY SAVING ENERGY LIST AV MODE 1 2 3 INPUT 4 5 6 You can adjust the TVSAVING internal speaker status. 2 3 5 6 8 9 LIST MARK FAV 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV MARK GUIDE FAV MENU MENU INPUT TV/ RAD TV/ RAD P A G E P ENERGY Q.VIEW LIST AV MODE TV/ RAD INPUT P P A G E TV/ 7 8 9 In AV1, AV2, AV3, COMPONENT , RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational RADeven when there is no 0 SAVING ENERGY video signal.
SOUND & LANGUAGE CONTROL ENERGY AV MODE INPUT TV/ Selecting Digital Audio ENERGY OutRAD SAVING LIST 2 3 5 6 8 9 LIST MARK FAV 3 5 6 8 9 MARK FAV MARK 0 GUIDE FAV MARK GUIDE FAV MENU 1 2 3 4 5 6 7 8 9 MARK FAV LIST MARK FAV Q.VIEW E RATIO LIST RATIO MARK Q.MENU FAV MARK FAV MARK Q.MENU FAV 1 P MUTE RATIO MUTE MENU MARK FAV GUIDE RATIO MUTE RATIO Q.MENU MUTE Manufactured under license from Dolby Laboratories.
RAD SAVING ENERGY ENERGY SAVING Q.VIEW LIST AV MODE 1 2 3 SAVING 4 5 6 Audio Reset 7 8 2 3 5 6 8 9 MARK GUIDE FAV Q.VIEW AV MODE TV/ RAD INPUT P P A G E TV/ RAD P A G E RATIO LIST 1 2 3 4 5 6 7 8 9 Q.VIEW P MUTE MARK FAV LIST MARK FAV Q.VIEW P A G E RATIO MUTE P P A G E 0 RATIO MARK Q.MENU FAV MARK FAV MUTE RATIO MUTE MENU MARK FAV GUIDE RATIO Q.MENU MUTE Q.MENU GUIDE MENU P ENERGY TV/ RAD INPUT SettingsQ.
ENERGY AV MODE INPUT ENERGY TV/ RAD SOUND & LANGUAGE CONTROL SAVING ENERGY AV MODE AV MODE INPUT TV/ RAD SAVING INPUT TV/ LIST ENERGY RAD AV MODE (In Digital INPUT Mode SAVING Description Audio Only) P Q.VIEW TV/ 1 2 P A G E ENERGY 3 AV MODE RAD INPUT This function is for4SAVING the 5 6blind, and provides explanatory audio describing the current situation in a TV programme in P LIST Q.VIEW TV/ 7 8audio.
ENERGY AV MODE INPUT ENERGY SAVING AV MODE TV/ RAD INPUT TV/ RAD SAVING I/II ENERGY AV MODE Q.VIEW LIST ENERGY P INPUT P A G E TV/ RAD Stereo/DualLIST ReceptionQ.VIEW (In Analogue Mode Only) P TV/ 1 2 3 4 5 6 7 8 9 AV MODE SAVING INPUT RAD P A G E 0 SAVING When a programme is selected, the sound information for the station appears with the programme number and station name. 2 3 5 6 8 9 MARK FAV 0 LIST MARK GUIDE FAV MARK FAV MENU LIST RATIO MARK FAV Q.
SOUND & LANGUAGE CONTROL NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. ➊ When NICAM mono is received, you can select NICAM MONO or FM MONO. ➋ When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM MONO.
ENERGY ENERGY SAVING Q.VIEW LIST AV MODE ENERGY 1 2 8 9 LIST SAVING Country Selection Q.VIEW 0 LIST 2 3 5 6 8 9 MARK FAV RATIO LIST MARK FAV 2 3 4 5 6 7 0 RATIO MARK Q.MENU FAV MARK FAV RATIO Q.MENU GUIDE MENU 1 8 9 Q.VIEW LIST MARK GUIDE FAV P Q.VIEW 1 2 3 4 5 6 7 8 9 MUTE 0 MARK FAV Q.
8 9 0 1 2 3 4 5 6 8 9 Q.VIEW LIST 7 MARK FAV MARK GUIDE FAV 0 MARK FAV LIST 1 2 3 1 MARK FAVLIST 2 1 MENU 4 5 OK 7 2 3 5 6 8 9 0 SOUND & LANGUAGE CONTROL 5 6 8 9 0 GUIDE MARK FAV MARK FAV GUIDE MENU OK ENERGY OK AV MODE LIST RATIO ADD MARK Q.VIEW FAV BACK ENERGY Save. BACK SAVING 1 2 3 4 5 6 7 8 9 SAVING APP/* MARK 0 FAV Q.VIEW P A G E INPUT Q.MENU P A G E P RATIO MUTE MENU MARK FAV GUIDE M RATIO MUTE P A G E Q.
ENERGY AV MODE INPUT ENERGY TIME SETTING SAVING ENERGY AV MODE SAVING Setup Clock Q.VIEW ENERGY LIST 1 2 3 P P AG ENERGYE Q.VIEW LIST 5 6 8 9 3 5 6 8 9 TV/ RAD AV MODE P A G E Q.VIEW You must set the time correctly before using on/offP timer function. MARK FAV RATIO LIST 0 2 TV/ RAD INPUT P 8 mode, 9 Once Clock is set in 7DTV you cannot change time. 0 ENERGY (You can set the clock manually only if the TV hasSAVING no DTV signal.
ENERGY AV MODE INPUT TIME SETTING ENERGY TV/ RAD ENERGY SAVING AV MODE INPUT TV/ RAD SAVING INPUT ENERGY Auto On/Off Time SettingINPUT AV MODE SAVING TV/ RAD ENERGY AV MODE P A G E Q.VIEW LIST AV MODE P TV/ The Off time function automatically switches theENERGY TV to standby at a preset time. RAD 1 2 3 AV MODE SAVING SAVING INPUT INPUT Two hours after the 4TV5is switched on by the on time function it will automatically switch back to standby mode unless a button has 6 P LIST Q.
5 6 8 9 FAV MARK 0 FAV LIST MARK GUIDE FAV MENU MARK FAV LIST RATIO MARK FAV Q.VIEW MARK Q.MENU FAV Q.VIEW P MUTE RATIO MUTE RATIO MUTE P A G E P A G E Q.MENU Sleep RATIO Timer Setting GUIDE MUTE You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. MENU 1 Q.MENU GUIDE GUIDE Select Sleep Timer. OK BACK OK Select Off, 10,INFO 20, 30, 60, 90, 120, 180 or 240 Min.
RAD SAVING ENERGY LIST AV MODE AV MODE TV/ RAD SAVING INPUT PARENTAL CONTROL / RATINGS ENERGY SAVING Q.VIEW 1 2 AV MODE 3 SAVING 4 5 6 ENERGY ENERGY AV MODE P A G E P ENERGY TV/ RAD INPUT TV/ RAD AV MODE INPUT TV/ RAD Set Password & Lock System SAVING ENERGY 7 2 3 5 6 8 9 0 ENERGY 2 3 SAVING 5 6 8 9 0 SAVING SAVING LIST INPUTAV MODE AV MODE P A G E 9 Q.VIEW INPUT 1 2 3 5 6 LIST 7 8 MARK 0 FAV Q.
ENERGY AV MODE MENU SAVING GUIDE ENERGY LIST INPUT Q.MENU AV MODE ENERGY AV MODE 1 2 3 SAVING 4 5 6 TV/ RAD AV MODE INPUT TV/ RAD SAVING INPUT Q.VIEW Programme Block SAVING ENERGY TV/ RAD INPUT P A G E P ENERGY TV/ RAD AV MODE INPUT LIST to watch or that Q.VIEW Blocks any programmes you do not want you do not want your children to watch.P 7 8 that 9 It is available to use this function in Lock SystemSAVING ”On”. 0 2 3 5 6 8 9 LIST MARK FAV Q.
PARENTAL CONTROL / RATINGS ENERGY AV MODE INPUT ENERGY SAVING TV/ RAD AV MODE INPUT TV/ RAD SAVING Mode Only) Parental Control (In Digital ENERGY AV MODE INPUT LIST ENERGY This function operates according to information from the broadcastingTV/station. Therefore if the signal has incorrect information, this AV MODE INPUT RAD SAVING functionQ.VIEW does not operate. P TV/ P A G E ENERGY 1 2to3gain access to this menu. A password is required SAVING ENERGY AV MODE RAD INPUT LISToption Q.
RAD SAVING ENERGY ENERGY SAVING Q.VIEW LIST AV MODE ENERGY 1 2 Key LockENERGY 7 2 3 5 6 8 9 LIST MARK FAV 3 5 6 8 9 LIST MARK FAV MARK 0 GUIDE FAV MARK FAV MARK GUIDE FAV MENU 9 AV MODE LIST AV MODE TV/ RAD P A G E P ENERGY TV/ RAD INPUT Q.VIEW INPUT SAVING P A G E INPUT AV MODE TV/ RAD INPUT P TV/ RAD P A G E TV/ RAD P Q.VIEW The TV can be set so that the remote control is required to control it. This feature can TV/ be used to prevent unauthorized viewing.
TELETEXT ENERGY AV MODE INPUT TV/ RAD * This feature is not available in all countries. SAVING Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
Special Teletext Functions Press the T. OPT button and then use ⋀ ⋁ button to select the Text Option menu. ■ ■ ■ Size i ii Text Option Selects double height text. Index i Displays the index page. iiIn the teletext mode, press this button to select a sub page number. The sub page Time number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN or NUMBER buttons.
APPENDIX Troubleshooting The TV does not operate properly. The remote control does not work - Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. - Ensure that the batteries are installed with correct polarity (+ to +, - to -). - Install new batteries. Power is suddenly turned off - Is the sleep timer set? - Check the power control settings. Has the Power supply been interrupted.
There is a problem in PC mode. (Only PC mode applied) The signal is out of range (Invalid format) - Adjust resolution, horizontal frequency, or vertical frequency. - Check the input source. Vertical bar or stripe on background & Horizontal Noise & Incorrect position - Use Auto configure or adjust clock, phase, or H/V position. (Option) Screen colour is unstable or single colour - Check the signal cable. - Reinstall the PC video card. There is a problem with PICTURE settings.
APPENDIX Product Specifications MODELS Dimensions (W x H x D) Weight 37LE5*** 42LE5*** 47LE5*** 32LD540-ZC 32LD541-ZC 42LD540-ZC 42LD541-ZC 32LE5400-ZA 32LE5410-ZA 37LE5400-ZA 37LE5410-ZA 42LE5400-ZA 42LE5410-ZA 47LE5400-ZA 47LE5410-ZA 1016 mm x 692 mm x 270 mm 1126.5 mm x 757.9 mm x 285.3 mm without stand 800 mm x 503 mm x 74.7 mm 1024 mm x 632 mm x 78.7 mm 784.6 mm x 499.5 mm x 39.9 mm 905 mm x 568 mm x 39.9 mm 1016 mm x 630 mm x 29.3 mm 1126.5 mm x 692 mm x 29.
Open Source License Open Source Software Notice The following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/LGPL2.1 License Agreements: GPL EXECUTABLES: Linux kernel 2.6, busybox LGPL LIBRARIES: uClibc, libexif LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.
APPENDIX GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of arranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”.
APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No. : TV_CD 210X280.