LCD TV PLASMA TV OWNER’S MANUAL PLASMA TV MODELS 4 2 P G 2 5* * 5 0 P G 2 5* * 4 2 P G 3 5* * 5 0 P G 3 5* * 5 0 P G 4 5* * 4 2 P G 6 5* * 5 0 P G 6 5* * 5 0 P G 7 5* * Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
“ This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of Macrovision’s copy protection technology in the product must be authorized by Macrovision. Reverse engineering or disassembly is prohibited.
ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ACCESSORIES Owner’s Manual Power Cord Batteries IN PU D/A T TV/RA INPU DIO T PO BR SIM PLINK TE IG W ER M O D TV E HT DV XT VC RA TIO D R I/II EX IT BA CK M EN U INFO i OK VO 1 IDE PR 2 5 or 3 8 6 0 UPDA TE SL EE P GU FA V MU TE 4 7 LIST SUBT ITLE L 9 or Q.
CONTENTS ACCESSORIES ............................................. 1 CONTENTS PREPARATION Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 6 Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Please set it up carefully so the product does not fall over . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Back Cover for Wire Arrangement . . . . . . . . . . . . .
SOUND & LANGUAGE CONTROL Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Product Specifications . . . . . . . . . . . . . . . . . . . . . 90 Programming the Remote Control . . . . . . . . . . . . 93 IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 External Control Device Setup . . . . . . . . . . . . . . 97 CONTENTS Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION FRONT PANEL CONTROLS A A Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth. PREPARATION PLASMA TV Models Remote Control Sensor POWER Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on.
PR PR PROGRAMME PREPARATION LCD TV Models or + VOL VOL VOLUME - OK OK OK MENU MENU MENU INPUT INPUT INPUT POWER Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in Intelligent Sensor Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5***, 32/37/42/47/52LG75** only) the OPTION menu.
PREPARATION BACK PANEL INFORMATION A Image shown may differ from your TV. PLASMA TV Models PREPARATION 10 1 2 4 3 5 11 5 1 2 3 4 6 6 7 8 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. AUDIO IN (RGB/DVI) Connect the audio from a PC. OPTICAL DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
1 3 AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT COMPONENT IN AV 1 HDMI IN 3 2 4 VIDEO L/MONO AUDIO R VIDEO 2 RGB IN (PC) AUDIO RS-232C IN (CONTROL & SERVICE) 5 AV 2 HDMI/DVI IN 1(DVI) 10 PREPARATION PCMCIA CARD SLOT LCD TV Models S-VIDEO 11 AV IN 3 ANTENNA IN 3 4 8 9 7 PCMCIA CARD SLOT 2 7 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. 8 Component Input Connect a component video/audio device to these jacks.
PREPARATION STAND INSTALLATION (Only 32/37/42LG35**, 32/37/42LG5***, 32/37/42LG75**) A PREPARATION When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. ■ ■ 1 1 2 PREPARATION ■ You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. Plasma TV models PREPARATION 42/50PG25**, 42/50PG35**, 42PG65**, 50PG45** 1 Connect the cables as necessary. 1 To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 2 Install the C A B L E M A N A G E M E N T C L I P as shown. CABLE MANAGEMENT CLIP Fix the C a b l e H o l d e r as shown and bundle the cables.
How to remove the cable management clip Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward. For the 42PG65** model, press the center of the C A B L E M A N A G E M E N T C L I P and then lift up it. 42/50PG25**, 42/50PG35**, 50PG45** 42PG65** PREPARATION Separate CABLE MANAGEMENT from TV by pressing two latches. 50PG65**/50PG75** LCD TV models 1 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual.
PREPARATION ■ ■ The TV can be installed in various ways such as on a wall or on a desktop etc. The TV is designed to be mounted horizontally. EARTHING Power Supply PREPARATION Ensure that you connect the earth wire to prevent possible electric shock. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. Circuit breaker DESKTOP PEDESTAL INSTALLATION For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the LCD TV models. HD RECEIVER SETUP ■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting a set-top box with an HDMI cable VIDEO 1 HDMI/DVI IN Connect the digital set-top box to H D M I I N 2 jack on the TV. 3 Select HDMI2 input source using the I N P U T button on the remote control. If connected to H D M I I N 3 (or H D M I I N 4) jack, select HDMI3 (or HDMI4) input source. 1(DVI) RS-232C IN (CONTROL & SERVICE) 1 HDMI-DTV OUTPUT EXTERNAL EQUIPMENT SETUP Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVD SETUP Connecting with a component cable AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT COMPONENT IN VIDEO HDMI/DVI IN 2 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. 2 RGB IN (PC) 1(DVI) RS-232C IN (CONTROL & SERVICE) 3 Turn on the DVD player, insert a DVD. 4 Select COMPONENT input source using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
Connecting with a Euro scart OPTICAL DIGITAL AUDIO OUT Turn on the DVD player, insert a DVD. 3 Select AV1 input source using the I N P U T button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source. 4 (PC) C IN SERVICE) ANTENNA IN 1 Refer to the DVD player's manual for operating instructions. (R) AUDIO (L) AUDIO/ VIDEO EXTERNAL EQUIPMENT SETUP 2 AV 2 AUDIO Connect the Euro scart socket of the DVD to the A V 1 Euro scart socket on the TV.
EXTERNAL EQUIPMENT SETUP Connecting HDMI cable AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT IN AV VIDEO HDMI/DVI IN Connect the HDMI output of the DVD to the H D M I I N 2 jack on the set. 1 RGB IN (PC) 2 Refer to the DVD player's manual for operating instructions. 3 ! NOTE G The TV can receive video and audio signals simultaneously when using a HDMI cable. If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
EXTERNAL EQUIPMENT SETUP Connecting with a Euro scart IN OPTICAL DIGITAL VI) AUDIO OUT 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) B IN (PC) 232C IN L & SERVICE) 3 AV 2 AUDIO Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. AV 1 VIDEO EXTERNAL EQUIPMENT SETUP 1 COMPONENT IN ANTENNA IN Select AV1 input source using the I N P U T button on the remote control.
Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 4 Select AV3 input source using the I N P U T button on the remote control. G L R OUTPUT SWITCH 1 S-VIDEO AV IN 3 ! NOTE VIDEO ANT IN ANT OUT 2 EXTERNAL EQUIPMENT SETUP 2 S-VIDEO HDMI IN 3 Connect the S-VIDEO output of the VCR to the S VIDEO input on the TV.
EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP - Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 3 Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
OTHER A/V SOURCE SETUP Camcorder MONO AUDIO R VIDEO L/MONO HDMI IN 3 VIDEO L R S-VIDEO 1 EXTERNAL EQUIPMENT SETUP PCMCIA CARD SLOT Video Game Set AV V IN 3 1 V I D E O jacks between TV and external equipment. Match the jack colors. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV3 input source using the I N P U T button on the remote control. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. 1 COMPONENT IN AV 1 AV 2 VIDEO HDMI/DVI IN RGB IN (PC) ) Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2 3 Turn on the PC and the TV. 4 Select RGB input source using the INPUT button on the remote control.
! NOTE G To G Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). G If using a sound card, adjust PC sound as required. G This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution RGB[PC] / HDMI[PC] mode EXTERNAL EQUIPMENT SETUP Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 31.469 37.500 37.879 46.875 49.725 48.363 56.476 60.023 47.693 47.649 47.649 66.647 63.595 65.150 74.077 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.03 59.99 59.94 59.94 59.988 60.00 60.00 60.
BACK Screen Setup for PC mode MENU EXIT INFO i GUIDE OK Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. FAV VOL PR EXTERNAL EQUIPMENT SETUP MUTE 1 2 3 Auto configure This function is for automatic adjustment of the screen position, clock, and phase.
EXTERNAL EQUIPMENT SETUP BACK MENU INFO i EXIT GUIDE OK Adjustment for screen Phase, Clock, Position If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. FAV VOL PR EXTERNAL EQUIPMENT SETUP MUTE To correct the screen size, adjust Clock. 1 2 This function works in the following mode : RGB[PC].
BACK INFO i MENU EXIT Selecting Wide XGA mode OK To view a normal picture, match the resolution of RGB mode and selection of XGA mode. FAV VOL MUTE 1 2 3 SETUPO Auto Config. PICTUREO Manual Config. AUDIOO XGA Mode Aspect Ratio TIMEO Reset OPTIONO Press the MENU button and then D or E button to select the SCREEN menu. SCREEN 2 PR EXTERNAL EQUIPMENT SETUP This function works in the following mode: RGB[PC] mode 1 GUIDE G Press the G button and then D or E button to select XGA Mode.
EXTERNAL EQUIPMENT SETUP BACK MENU INFO i EXIT GUIDE OK Initializing (Reset to original factory settings) FAV VOL EXTERNAL EQUIPMENT SETUP This function operates in current mode. To initialize the adjusted value PR MUTE 1 2 3 It is not possible to use ISM Method and Low power in LCD TV models. It is possible to use Power Indicator in LCD TV models only. 1 Press the MENU button and then select the OPTION menu. 2 Press the G button and then D or E button to select Factory Mode.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD POWER Switches the TV on from standby or off to standby. D/A INPUT Selects digital or analogue mode. Switches the TV on from standby. BRIGHT VCR RATIO I/II INPUT External input mode rotate in regular sequence. Switches the TV on from standby. Brightness Adjusts screen brightness.
WATCHING TV / PROGRAMME CONTROL INPUT D/A POWER TV/RADIO INPUT MODE Selects the remote operating modes. MODE TV See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. (G p.51) DVD BRIGHT VCR WATCHING TV / PROGRAMME CONTROL SIMPLINK TEXT RATIO I/II TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 1 RATIO Selects your desired picture format. I/II Selects the sound output.
TURNING ON THE TV - When your TV is turned on, you will be able to use its features. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD BRIGHT VCR SIMPLINK TEXT 1 RATIO Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. BACK In standby mode to turn TV on, press the r / I, INPUT or PR D or E button on the TV or press the POWER, INPUT, D/A, PR + or - or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL PROGRAMME SELECTION INPUT D/A MODE TV POWER TV/RADIO INPUT DVD BRIGHT VCR SIMPLINK TEXT 1 RATIO I/II Press the P R + or - or NUMBER buttons to select a programme number. WATCHING TV / PROGRAMME CONTROL BACK MENU EXIT INFO i GUIDE OK VOLUME ADJUSTMENT FAV VOL PR MUTE 1 Press the VOL + or - button to adjust the volume. If you wish to switch the sound off, press the MUTE button. You can cancel this function by pressing the MUTE, VOL + or - , or I/II button.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Press the M E N U button and then D or E button to display each menu. 2 Press the G button and then D or E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F or G button. You can move to a higher level menu by pressing the OK or MENU button.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING (IN DIGITAL MODE) BACK MENU INFO i EXIT GUIDE OK Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted. FAV VOL PR MUTE 1 WATCHING TV / PROGRAMME CONTROL When the Republic of Slovenia is selected as the country, saving channels starts from 800 while the digital TV tuning.
MANUAL PROGRAMME TUNING (IN DIGITAL MODE) BACK MENU INFO i EXIT GUIDE OK Manual Tuning lets you manually add a programme to your programme list. FAV VOL When the Republic of Slovenia is selected as the country, saving channels starts from 800 while the digital TV tuning. MUTE 1 Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Manual Tuning.
WATCHING TV / PROGRAMME CONTROL BACK MENU INFO i EXIT PROGRAMME EDIT (IN DIGITAL MODE) GUIDE OK FAV When a programme number is skipped, it means that you will be unable to select it using PR + or - button during TV viewing. VOL PR MUTE If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu WATCHING TV / PROGRAMME CONTROL This function enables you to skip the stored programmes.
Mini Glossary Displayed when a DTV Programme. Displayed when a Locked Programme. Displayed when a Radio Programme. A Skipping a programme number Select a programme number to be skipped with the D or E or F or G button. 2 Press the BLUE button. The skipped programme number turns to blue. 3 Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR + or button during normal TV viewing.
WATCHING TV / PROGRAMME CONTROL BOOSTER (IN DIGITAL MODE ONLY) BACK MENU INFO i EXIT GUIDE OK When the interference between programmes appear, select Booster to Off. FAV VOL PR MUTE 1 WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Booster. Press the G button and then D or E button to select On or Off. 4 Press the EXIT button to return to normal TV viewing.
SOFTWARE UPDATE (IN DIGITAL MODE ONLY) BACK MENU INFO i EXIT GUIDE OK Software Update means software can be downloaded through the digital terrestrial broadcasting system. FAV VOL PR MUTE 1 Press the MENU button and then select the SETUP menu. 2 Press the G button and then Software update. D or E button to select 3 Press the G button and then On or Off.
WATCHING TV / PROGRAMME CONTROL DIAGNOSTICS (IN DIGITAL MODE ONLY) BACK WATCHING TV / PROGRAMME CONTROL 1 2 Press the G button and then D or E button to select Diagnostics. Press the G button to display Manufacturer, Model/Type, Serial Number and Software Version. 4 Press the EXIT button to return to normal TV viewing.
CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY) BACK MENU INFO i EXIT GUIDE OK This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction.
WATCHING TV / PROGRAMME CONTROL BACK MENU INFO i EXIT AUTO PROGRAMME TUNING (IN ANALOGUE MODE) OK FAV All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV. WATCHING TV / PROGRAMME CONTROL 1 Press the G button and then D or E button to select Auto Tuning. 3 Press the G button to select System.
BACK MENU INFO i EXIT MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) GUIDE OK FAV Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. VOL PR MUTE Press the G button and then D or E button to select Manual Tuning. 3 Press the G button to select Storage. Select the desired programme number with the F or G button or NUMBER buttons on the Storage menu. 4 3 4 5 6 7 8 9 LIST 0 Q.
WATCHING TV / PROGRAMME CONTROL FINE TUNING (IN ANALOGUE MODE) BACK MENU INFO i EXIT GUIDE Normally fine tuning is only necessary if reception is poor. OK FAV VOL WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Manual Tuning. 3 Press the G button and then D or E button to select Fine. 4 Press the G button and then F or G button to fine tune for the best picture and sound.
PROGRAMME EDIT (IN ANALOGUE MODE) BACK This function enables you to delete or skip the stored programmes. You can also move some channels to other programme numbers or copy blank channel data into a selected programme number. INFO i GUIDE OK SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Press the MENU button and then D or E button to select the SETUP menu. TIMEO OPTIONO 2 Press the G button and then D or E button to select Programme Edit.
WATCHING TV / PROGRAMME CONTROL SIMPLINK TEXT RATIO I/II FAV VOL PR MUTE BACK MENU EXIT INFO i GUIDE 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW OK WATCHING TV / PROGRAMME CONTROL A Moving a programme a Select a programme to be moved with D or E or F or G button. b Press the YELLOW button. c Move the programme to the desired programme number with the D or E or F or G button. d Press the YELLOW button again to release this function.
OK SELECTING THE PROGRAMME TABLE FAV VOL You can check which programmes are stored in the memory by displaying the programme table. PR MUTE 7 8 9 LIST 0 Q.VIEW Displaying programme LIST 1 Press the LIST button to display the PROGRAMME LIST menu. The programme list appears on the screen. • You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode.
WATCHING TV / PROGRAMME CONTROL INPUT SOURCE SELECTION BACK MENU INFO i EXIT Selects a label for each input source which is not in use. GUIDE OK It is not possible to use HDMI4 in LCD TV models. FAV VOL PR MUTE 1 WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the OPTION menu. 2 Press the G button and then D or E button to select Input Label.
FUNCTION BACK MENU INFO i EXIT GUIDE OK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. FAV This TV might not function properly when using it with other products with HDMI-CEC function. VOL PR MUTE 1 2 3 WATCHING TV / PROGRAMME CONTROL This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not require the SIMPLINK menu, select “Off”.
WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, OK, buttons. , , , , , and Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. WATCHING TV / PROGRAMME CONTROL Power off all devices When you switch off the TV, all connected devices are turned off.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in NOW/NEXT Guide Mode Remote Control Buttons RED YELLOW BLUE F EPG (ELECTRONIC PROGRAMME GUIDE) or G D or E PR + or GUIDE/EXIT TV/RADIO INFO i Function Change EPG mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcast Programme Page Up/Down Switch off EPG Select TV or RADIO Programme Detail information on or off Programme Guide D 6
Button Function in Extended Description Box Remote Control Buttons D or E INFO i PR + or GUIDE/EXIT Function Text Up/Down The detail information on or off Page Up/Down Switch off EPG Information Friends 14 : 35 3 Apr Mona The Vampire 14:00 15:20 Record 3 Apr Miss Gotto’s Haunted House/Cry Of the Swamp; Miss Gotto Wail Moves into a new house, and there’s mysterious wail enanating from the local sweep Of The Swamp; Miss Gotto Wail Moves into a new house, and there’s a mysterious wail enanating from the
PICTURE CONTROL VCR SIMPLINK TEXT RATIO I/II PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 1 6 : 9, O r i g i n a l, 4 : 3, 1 4 : 9, Z o o m 1 / 2 and J u s t S c a n (Only 32LG59**, 37/42/47/52LG55**, 32/37/42/47/52LG75**, 42LG75**, 50PG45**, 50PG75**). BACK MENU EXIT INFO i GUIDE OK It is possible to use Just Scan in DTV mode only.
• 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ration, grey bars will appear on both the left and right of the screen. • Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped. The picture adopting a compromise between alteration and screen coverage. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode.
PICTURE CONTROL PRESET PICTURE SETTINGS BACK Intelligent Sensor PICTURE CONTROL Cinema User 1/2 1 Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5***, 32/37/42/47/52LG75** only) Select this option to display a sharp image. The most general and natural screen display status. Select this option to display a cinema image. Select this option to use a user defined setting.
BACK MENU EXIT Auto Colour Tone Control (Warm/Medium/Cool) INFO i GUIDE OK FAV To initialize values (reset to default settings), select the Cool option. VOL PR MUTE 1 2 3 PICTURE CONTROL Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red or set to cool to see less intense colours with more blue. It’s available to use this function in User mode.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT BACK MENU INFO i EXIT Picture Mode-User option GUIDE OK It is possible to use Back Light function in LCD TV models only. FAV VOL PR MUTE 1 PICTURE CONTROL 1 2 3 SETUPO Picture Mode G Colour Temperature PICTURE Press the MENU button and then D or E button to select the PICTURE menu. AUDIOO TIMEO OPTIONO Advanced Picture Reset Demo SCREENO 2 Press the G button and then D or E button to select Picture Mode. Move MENU Prev.
BACK MENU INFO i EXIT Colour Tone - User option GUIDE OK To adjust red, green, blue to any colour temperature you prefer. FAV VOL PR MUTE 1 3 PICTURE CONTROL 1 2 SETUPO Picture Mode G Colour Temperature PICTURE Press the MENU button and then D or E button to select the PICTURE menu. AUDIOO TIMEO OPTIONO Advanced Picture Reset Demo SCREENO 2 Press the G button and then D or E button to select Colour Temperature. Move MENU Prev.
PICTURE CONTROL XD - PICTURE IMPROVEMENT TECHNOLOGY BACK MENU INFO i EXIT XD is LG electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. GUIDE OK FAV It is not possible to use this function in RGB[PC] mode. VOL PR MUTE 1 PICTURE CONTROL 1 Press the MENU button and then D or E button to select the PICTURE menu. 2 Press the G button and then D or E button to select XD.
DEMO BACK MENU INFO i EXIT GUIDE Use it to see the difference between XD Demo on and XD Demo off. OK It is not possible to use this function in RGB[PC], HDMI[PC] mode. FAV VOL PR MUTE 1 2 3 PICTURE CONTROL 1 2 SETUPO Picture Mode G Colour Temperature PICTURE Press the MENU button and then D or E button to select the PICTURE menu. AUDIOO Advanced Picture Reset OPTIONO Demo SCREENO TIMEO Press the MENU button and then D or E button to select XD Demo. Move MENU Prev.
PICTURE CONTROL ADVANCED - CINEMA/REAL CINEMA BACK MENU INFO i EXIT To set the TV up for the best picture quality for viewing films. GUIDE OK The Cinema function operates at DTV, TV, AV, S-Video and Component 480i/576i mode. The Real Cinema function operates at Component, HDMI-DTV 1080p/24hz mode.( This function is used at the LCD TV model.) FAV VOL PR MUTE 1 2 3 Press the MENU button and then D or E button to select the PICTURE menu.
ADVANCED - TRUMOTION BACK INFO i MENU EXIT GUIDE (37/42/47/52LG75** only) OK It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. This feature is disable in RGB-PC, HDMI-PC mode. FAV VOL PR MUTE 1 2 3 PICTURE CONTROL 1 2 SETUPO Picture Mode G Colour Temperature PICTURE Press the MENU button and then D or E button to select the PICTURE menu.
PICTURE CONTROL PICTURE RESET BACK MENU EXIT INFO i GUIDE Returns to the default factory setting for Picture Mode, Colour, Temperature, XD and Advanced. OK FAV VOL 1 Press the MENU button and then D or E button to select the PICTURE menu. PICTURE CONTROL 2 Press the G button and then D or E button to select Picture Reset. 3 Press the G button to initialize the adjusted value.
IMAGE STICKING MINIMIZATION (ISM) METHOD BACK MENU INFO i EXIT GUIDE OK A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. FAV VOL PR MUTE It is not possible to use this function with LCD TV models. 1 2 3 It is possible to use Power Indicator in LCD TV models only.
PICTURE CONTROL LOW-POWER PICTURE MODE BACK INFO i MENU EXIT This function allows you to reduce the power consumption of the TV. GUIDE OK It is not possible to use this function with LCD TV models. FAV VOL PR It is possible to use Power Indicator in LCD TV models only. MUTE 1 PICTURE CONTROL 1 Press the MENU button and then select the OPTION menu. 2 Press the G button and then D or E button to select Factory Mode.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER BACK MENU EXIT INFO i GUIDE OK AVL automatically remains on the same level of volume if you change programmes. FAV VOL PR MUTE 1 D or E SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio OPTIONO button to 3 0 SCREENO 2 Press the G button and then Auto Volume. D or E button to select Move 3 Press the G button and then On or Off. 4 Press the EXIT button to return to normal TV viewing. D MENU Prev.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGSSOUND MODE BACK MENU INFO i EXIT GUIDE OK You can select your preferred sound setting; Surround MAX, Standard, Music, Cinema or Sport and you can also adjust the frequency of the equalizer. FAV VOL MUTE Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
SOUND SETTING ADJUSTMENT -USER MODE BACK MENU INFO i EXIT GUIDE OK Adjusting the audio equalizer. FAV VOL PR MUTE 1 3 SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio OPTIONO Press the MENU button and then D or E button to select the AUDIO menu. 0 SCREENO 2 Press the G button and then D or Sound Mode. E button to select Move MENU Prev. 1 3 Press the G button and then D or E button to select User. 4 Press the G button.
SOUND & LANGUAGE CONTROL BALANCE BACK MENU EXIT You can adjust the sound balance of the speakers to preferred levels. INFO i GUIDE OK FAV VOL PR MUTE 1 SOUND & LANGUAGE CONTROL 1 Press the MENU button and then select the AUDIO menu. D or E 2 SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio OPTIONO button to 3 0 SCREENO 2 Press the G button and then D or E button to select Balance. Move 3 4 Press the G button and then desired adjustment.
TV SPEAKERS ON/ OFF SETUP BACK MENU EXIT INFO i GUIDE OK You can adjust the internal speaker status. In AV1, AV2, AV3, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. FAV VOL PR MUTE 1 2 3 If you wish to use an external hi-fi system, turn off the TV internal speakers. Press the MENU button and then select the AUDIO menu. D or E button to 0 SCREENO 2 Press the G button and then D or E button to select TV Speaker.
SOUND & LANGUAGE CONTROL SELECTING DIGITAL AUDIO BACK MENU EXIT INFO i GUIDE OK It is a feature to set input and output of TV sound. In order to deliver sound data intact, you should transform TV sound into digital signals and transfer them to audio decoder or digital speaker. FAV VOL PR MUTE 1 2 3 This feature is not available in ordinary analogue speakers and is available only for audio decoders or digital speakers embedded with audio decoder.
I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II button twice. In mono reception, the clarity of sound is improved. To switch back to stereo, press the I/II button twice.
SOUND & LANGUAGE CONTROL NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received by pressing the I/II button repeatedly. SOUND & LANGUAGE CONTROL 1 When NICAM MONO is received, you can select NICAM MONO or FM MONO. 2 When NICAM STEREO is received, you can select NICAM STEREO or FM MONO.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION BACK The installation guide menu appears on the TV screen when it is switched on for the first time. 1 Press the D or E or F or G button and then, O K button to select your desired language. 2 Press the D or E button and then, O K button to select your country. MENU EXIT INFO i GUIDE OK FAV VOL PR MUTE 1 Press the M E N U button and then use D or to select the OPTION menu. 2 Press the G button and then use D or E button to select Language.
SOUND & LANGUAGE CONTROL SIMPLINK TEXT RATIO I/II LANGUAGE SELECTION (IN DIGITAL MODE ONLY) BACK MENU INFO i EXIT The Audio function allows selection of a preferred language.If audio data in a selected language is not broadcast, the default language audio will be played. GUIDE OK Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
TIME SETTING CLOCK SETUP BACK MENU EXIT The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. INFO i GUIDE OK FAV VOL PR MUTE 1 D or E 3 SETUPO Clock PICTUREO Off Time AUDIOO On Time Auto Sleep TIME G Time Zone OPTIONO button to TIME SETTING 1 Press the MENU button and then select the TIME menu. 2 SCREENO 2 Press the Clock.
TIME SETTING AUTO ON/OFF TIMER SETTING BACK The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work.
AUTO SHUT-OFF SETTING BACK MENU EXIT If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes. INFO i GUIDE OK FAV VOL PR MUTE 1 Press the MENU button and then select the TIME menu. D or E 3 SETUPO Clock PICTUREO Off Time AUDIOO On Time Auto Sleep TIME G Time Zone OPTIONO button to TIME SETTING 1 2 SCREENO 2 Press the G button and then Auto Sleep. D or E button to select Move 3 4 Press the G button and then On or Off.
TIME SETTING FAV VOL SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. PR MUTE 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW UPDATE INDEX TIME SLEEP HOLD REVEAL ? SUBTITLE a Press the SLEEP button repeatedly to select the number of minutes. The display ‘ - - - Min ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
PARENTAL CONTROL / RATINGS BACK MENU INFO i EXIT GUIDE SET PASSWORD & LOCK SYSTEM OK Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. FAV VOL PR MUTE Press the MENU button and then select the OPTION menu. 2 Press the G button and then Lock System. D or E button to select 3 Press the On. F or G button to select G button and then D or E 2 3 4 5 6 7 8 9 LIST 0 Q.
PARENTAL CONTROL / RATINGS INPUT D/A PARENTAL CONTROL MODE TV POWER TV/RADIO INPUT DVD BRIGHT VCR BACK This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. INFO i MENU EXIT GUIDE OK This allows you to set up blocking schemes to block specific channels and ratings. FAV VOL A password is required to gain access to this menu.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
APPENDIX TROUBLESHOOTING The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB Press the VOL + or - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust Balance in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) with stand without stand with stand Weight without stand Power requirement Power Consumption MODELS Dimensions (Width x Height x Depth) with stand APPENDIX without stand Weight with stand without stand Power requirement Power Consumption 32LG5*** 37LG55** 32LG5500-ZB 32LG5900-ZG 37LG5500-ZB 813.8 x 598.8 x 231.9 mm 32.1 x 23.6 x 9.2 inches 813.8 x 599.3 x 294 mm 32.1 x 23.6 x 11.6 inches 936.4 x 684.4 x 293.
42PG35** 50PG35** 42PG65** 42PG3500-ZA 50PG3500-ZA 42PG6500-ZA with stand 1039.5 x 726.0 x 307.6 mm 41.0 x 28.6 x 12.1 inches 1232.0 x 850.0 x 363.6 mm 48.5 x 33.5 x 14.4 inches 1044.0 x 735.4 x 308.0 mm 41.1 x 29.0 x 12.2 inches without stand 1039.5 x 673.7 x 84.0 mm 41.0 x 26.6 x 3.3 inches 1232.0 x 793.0 x 84.0 mm 48.5 x 31.2 x 3.3 inches 1044.0 x 680.6 x 79.6 mm 41.1 x 26.8 x 3.2 inches 28.0 kg / 61.8 lbs 25.0 kg / 55.1 lbs 42.3 kg / 93.3 lbs 38.3 kg / 84.5 lbs 27.8 kg / 61.
APPENDIX 32LG75** 37LG75** 42LG75** 32LG7500-ZB 37LG7500-ZB 42LG7500-ZB with stand 797 x 597 x 227.3 mm 31.4 x 23.6 x 9.0 inches 918.6 x 684.8 x 293.4 mm 36.2 x 27.0 x 11.6 inches 1026.2 x 734 x 293.4 mm 40.4 x 28.9 x 11.6 inches without stand 797 x 558.6 x 100.5 mm 31.4 x 22 x 4.0 inches 918.6 x 632.8 x 111.7 mm 36.2 x 25.0 x 4.4 inches 1026.2 x 687.9 x 111.8 mm 40.4 x 27.1 x 4.4 inches 13.3 kg / 29.4 lbs 11.8 kg / 26.1 lbs 18.6 kg / 41.1 lbs 16.0 kg / 35.3 lbs 22.4 kg / 49.4 lbs 19.
PROGRAMMING THE REMOTE CONTROL The remote control is a multi brand or universal remote. It can be programmed. to operate most remote controlled devices from other manufacturers. Note that the remote control may not control all models from other brands. Programming a code into a remote mode Testing your remote control.
APPENDIX VCR Brand AIWA AKAI APPENDIX 94 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Brand MAGNAVOX 031 067
IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
APPENDIX Code (Hexa) APPENDIX 96 00 01 02 03 40 41 06 07 08 09 10 11 12 13 14 15 16 17 18 19 0B AA AB 56 5B 1E 1A 50 F0 7E E0 E1 0A 0E 43 44 53 20 2A 26 28 62 70 65 61 63 71 72 79 B0 BA B2 B3 8F 8E B1 BD Function PR + PR VOL + VOL Up (D) Down (E) Right (G) Left (F) POWER MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 INPUT INFO i GUIDE SUBTITLE EXIT FAV Q.
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup VIDEO Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C connection cables are not supplied with the TV.
APPENDIX BACK Set ID MENU INFO i EXIT GUIDE OK Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p.102 FAV It is not possible to use ISM Method and Low power in LCD TV models. VOL PR MUTE 1 It is possible to use Power Indicator in LCD TV models only. 1 Press the MENU button and then D or E button to select the OPTION menu. 2 Press the G button and then D or E button to select Factory Mode.
Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) k k k k k k k k k k k k k k k k k k j j j m m m x a c d e f g h i j k l m t u v w $ z p q u a c g b 00 ~ 01 Refer to p.
APPENDIX 01. Power (Command: k a) 04. Volume Mute (Command: k e) G To control Power On/Off of the TV. G To control volume mute on/off. Transmission You can also adjust mute using the MUTE button on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [k][e][ ][Set ID][ ][Data][Cr] G To show Power On/Off.
08. Colour (Command: k i) 1 2 . Remote control lock mode ( C o m m a n d : k m ) G To adjust the screen colour. G To lock the front panel controls on the TV and remote You can also adjust colour in the PICTURE menu. Transmission control. Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][m][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 102.
APPENDIX 16. Green Adjustment (Command: k w) 19. ISM Method (Command: j p) G To adjust green in colour temperature. G To control the ISM method. You can also adjust ISM Transmission Method in OPTION menu. It is not possible to use this function with LCD TV models. Transmission [k][w][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 50 * Refer to ‘Real data mapping 2’.
21. Auto Configure (Command: j u) 2 4 . B a c k L i g h t ( C o m m a n d: m g ) G To adjust picture position and minimize image shaking G To adjust the screen back light. automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] You can also adjust back light in the PICTURE menu. It is possible to use this function with LCD TV models.