LCD TV OWNER’S MANUAL 32LH40 37LH40 42LH40 47LH40 55LH40 32LH41 37LH41 42LH41 47LH41 55LH41 37LH55 42LH55 47LH55 55LH55 32CL40 42CL40 47CL40 55LH400C Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. Model: Serial: 1-800-243-0000 This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTIONS 4 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back Panel Information . . . . . . . .
SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 82 Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 84 Sound Setting Adjustment - User Mode . . . . . . . . . . . 85 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 TV Speakers On/Off Setup . .
FEATURE OF THIS TV High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. This TV contains the detailed calibrations necessary for professional certification by the Imaging Science Foundation.
PREPARATION ACCESSORIES RA TIO Q. SL EE MEN P U PO W ER IN MEN U ENE PU RGY T SAV ING EN TE R RE TU RN INFO L MA R FA K V MU CH VO 1 2 4 MO DE P 9 0 FLASH BK CD Manual A G 6 8 Owner’s Manual AV E 3 5 7 LI ST TE 1.5V 1.5V Remote Control, Batteries Power Cord Option Extras Not included with all models * Wipe spots on the exterior only with the polishing cloth. * Do not wipe roughly when removing stain. Excessive pressure may cause scratch or discoloration.
PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your TV. PREPARATION 32/37/42/47/55LH40, 32/37/42/47/55LH41, 37/42/47/55LH55, 55LH400C CHANNEL (D,E) Buttons CH VOLUME (+, -) Buttons VOL ENTER Button ENTER SPEAKER MENU Button MENU INPUT Button Remote Control Sensor, Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
PREPARATION 32/42/47CL40 CH VOL CHANNEL ( , ) Buttons VOLUME (+, -) Buttons SPEAKER ENTER ENTER Button MENU Intelligent Sensor Adjusts picture according to the surrounding conditions MENU Button INPUT INPUT Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
PREPARATION BACK PANEL INFORMATION ■ Image shown may differ from your TV.
PREPARATION 1 AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). 6 RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. This port is used for Service or Hotel mode. 2 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). 7 COMPONENT IN Analog Connection. Supports HD.
PREPARATION STAND INSTRUCTION (For 32/42/47CL40) ■ Image shown may differ from your TV. INSTALLATION (Only 32/42CL40) PREPARATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the STAND BODY with COVER BASE of the TV by using the 4 screws supplied. STAND BODY COVER BASE 3 Assemble the TV as shown. 4 Fix the 4 bolts securely using the holes in the back of the TV.
DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PREPARATION 1 PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
PREPARATION STAND INSTRUCTION (For 32/37/42/47/55LH40, 32/37/42/47/55LH41, 37/42/47/55LH55, 55LH400C) ■ Image shown may differ from your TV. PREPARATION INSTALLATION (Except 55LH40, 55LH41, 55LH55, 55LH400C) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV.
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PREPARATION DETACHMENT PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
CABLE MANAGEMENT ■ Image shown may differ from your TV. 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. PREPARATION For 32/42/47CL40 CABLE MANAGEMENT CLIP 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
PREPARATION CABLE MANAGEMENT ■ Image shown may differ from your TV. PREPARATION For 32/37/42/47/55LH40, 32/37/42/47/55LH41, 37/42/47/55LH55, 55LH400C 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP 3 20 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches CAUTION G G PREPARATION 4 inches Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
PREPARATION ATTACHING THE TV TO A DESK (Except 47/55LH40, 47/55LH41, 47/55LH55, 47CL40, 55LH400C) PREPARATION The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand 1-Screw (provided as parts of the product) Desk WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
PREPARATION ■ ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION PREPARATION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. EXTERNAL EQUIPMENT SETUP Component Connection 1.
EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the digital set-top box to HDMI/DVI IN 1, 2, 3, or 4 jack on the TV. /DVI IN AV IN 1 RGB IN (PC) VIDEO L (MONO) AUDIO R 3 AUDIO IN 2 L (RGB/DVI) R 1 EO A C RS-232C IN (CONTROL&SERVICE) AUDIO OMPONENT IN 2. How to use Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
DVI to HDMI Connection 1. How to connect Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1, 2, or 3 jack on the TV. /DVI IN AV IN 1 RGB IN (PC) L (MONO) AUDIO R 3 AUDIO IN 2 Connect the digital set-top box audio output to the AUDIO IN ( RGB/DVI) jack on the TV. OPTICAL DIG AUDIO OU 2 L (RGB/DVI) R 1 ANTENNA CABLE IN RS-232C IN (CONTROL&SERVICE) AUDIO ENT IN 2. How to use Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 2 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1 jacks on the TV. PB ■ ■ ■ Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below.
Composite (RCA) Connection 1. How to connect /DVI IN AV IN 1 VIDEO L (MONO) AUDIO R 2 2 L EXTERNAL EQUIPMENT SETUP 1 3 Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) R 1 1 VIDEO AUDIO COMPONENT IN 2. How to use ■ ■ ■ 1 Turn on the DVD player, insert a DVD. Select the A V 1 or A V 2 input source on the TV using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection EXTERNAL EQUIPMENT SETUP 1. How to connect RGB IN (PC) 1 Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the TV. OPTICAL DIGITAL AUDIO OUT RGB/DVI) 1 RS-232C IN (CONTROL&SERVICE) ANTENNA/ CABLE IN ANT OUT ANT IN 2 2 ■ ■ Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
Composite (RCA) Connection 1. How to connect /DVI AV IN 1 VIDEO L (MONO) AUDIO R 3 2 2. How to use R 1 1 VIDEO Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ■ Select the A V 1 input source on the TV using the INPUT button on the remote control. ■ If connected to AV IN 2, select AV2 input source on the TV. ■ ! NOTE 2 L AUDIO COMPONENT IN 1 ANT IN S-VIDEO VIDEO L EXTERNAL EQUIPMENT SETUP Connect the AUDIO/VIDEO jacks between TV and VCR.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder 1. How to connect Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) ■ ■ ■ Select the A V 2 input source on the TV using the INPUT button on the remote control. If connected to AV IN 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. AV IN 2 32 L USB IN IN 4 2.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1 Connect the VGA output of the PC to the RGB IN ( P C) jack on the TV. /DVI IN RGB IN (PC) R 3 AUDIO IN OPTICAL DIGITAL AUDIO OUT 2 (RGB/DVI) 2 Connect the PC audio output to the AUDIO IN ( RGB/DVI) jack on the TV. 2. How to use ■ ■ 1 ANTENNA/ CABLE IN RS-232C IN (CONTROL&SERVICE) 2 1 AUDIO RGB OUTPUT EXTERNAL EQUIPMENT SETUP 1.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 /DVI IN AV IN 1 Connect the DVI output of the PC to the HDMI/DVI IN 1, 2, or 3 jack on the TV. RGB IN (PC) VIDEO L (MONO) AUDIO R 3 AUDIO IN 2 L 2 Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2. How to use ■ ■ (RGB/DVI) R 1 O A RS-232C IN C (CONTROL&SERVICE) AUDIO MPONENT IN 1 2 Turn on the PC and the TV.
! NOTES To get the the best picture quality, adjust the PC graphics card to 1920x1080. G The synchronization input form for Horizontal and Vertical frequencies is separate. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution PICTURE Move SCREEN Enter • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config. Position R G • Advanced Control • Picture Reset Screen (RGB-PC) Size Phase Reset 1 MENU 2 Select PICTURE. ENTER Select Screen (RGB-PC). ENTER Select Resolution. 3 4 ENTER 5 ENTER 36 Move E EXTERNAL EQUIPMENT SETUP You can choose the resolution in RGB-PC mode.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move SCREEN Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Move Prev. Resolution Auto Config.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. EXTERNAL EQUIPMENT SETUP PICTURE Move SCREEN Enter Move Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config.
Screen Reset (Reset to original factory values) Returns Position, Si ze, and Phase to the default factory settings. This feature operates only in RGB-PC mode. Move SCREEN Enter Move Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config. Position R • Advanced Control • Picture Reset Screen (RGB-PC) To Set G Size Yes No EXTERNAL EQUIPMENT SETUP PICTURE Phase Reset 1 MENU 2 Select PICTURE. ENTER Select Screen (RGB-PC).
EXTERNAL EQUIPMENT SETUP USB IN USB CONNECTION or 1 VIDEO L/MONO AUDIO R EXTERNAL EQUIPMENT SETUP IN 4 Memory Key AV IN 2 1. How to connect 1 Connect the USB device to the USB I N jack on the side of TV. 2. How to use ■ After connecting the USB I N jack, you use the USB func- tion. (G p.
AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 1 Connect one end of the optical cable to the TV port of OPTICAL DIGITAL AUDIO OUT. 2 Connect the other end of the optical cable to the digital audio input on the audio equipment.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. RATIO Changes the aspect ratio. G p.68 RATIO POWER INPUT ENERGY SAVING SLEEP Select the amount of time before your TV turns off automatically. G p.98 SLEEP Q. MENU MENU WATCHING TV / CHANNEL CONTROL POWER Turns the TV on from standby or off to standby. INPUT Rotates through inputs. Also switches the TV on from standby. G p.
THUMBSTICK Navigates the on-screen menus and adjusts the system settings to your preference. (Up/Down/Left Right/ENTER) RETURN Allows the user to move return one step in an interactive application or other user interaction function. AV MODE Toggles through preset Video and Audio modes. G p.56 VOLUME UP Adjusts the volume. /DOWN FAV Scroll through the programmed Favorite channels. G p.52 MARK Select the input to apply the Picture Wizard settings. G p.71 Use to mark or unmark a photo/music. G p.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly. And switch the AC power control switch on TV (Except 32/42/47CL40). At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the ) button on the TV or press the , INPUT, CH (DE or POWER, INPUT, CH ( or ), Number (0~9) button on the remote control. 1 2 WATCHING TV / CHANNEL CONTROL Select the viewing source by using the INPUT button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment. ■ “Store Demo” Mode is only intended for use in retail environments.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio F 16:9 A Aspect Ratio: Selects your desired picture format. P i c t u r e M o d e: Selects the factory preset picture depend on the viewing environment. Sound Mode: Selects the factory preset sound for type of program. Multi Audio: Changes the audio language (Digital signal). SAP: Selects MTS sound (Analog signal).
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected during TV broadcasting hours. Auto Tuning memorizes only the channels available at the time.
Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Enter DTV F G Select channel type and RF-channel number. Channel 2 DTV 2-1 Bad Normal Good Delete Close 1 MENU Select CHANNEL. 2 ENTER Select Manual Tuning. ENTER Select D T V, T V, CADTV, or C A T V.
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu.
CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. Channel List This padlock is displayed when the channel is locked with parental control. DTV 2-1 DTV 3-1 DTV 4-1 Displaying Channel List 1 Display the Channel List. LIST Selecting a channel in the channel list 1 WATCHING TV / CHANNEL CONTROL Exit Select a channel. 2 ENTER Switch to the chosen channel number. Paging through a channel list 1 CH P A G E 2RETURN Turn the pages.
WATCHING TV / CHANNEL CONTROL FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. To tune to a favorite channel, press the F A V (Favorite) button repeatedly. 1 Del/Add/Fav F G CH P A G E or 1 2 4 5 6 7 8 9 3 Select your desired channel. 0 WATCHING TV / CHANNEL CONTROL 2Q. MENU Select Del/Add/Fav. A 3 Favorite Select Favorite. 4Q.
BRIEF INFORMATION Brief Info shows the present screen information. 1INFO i Show the Brief Info on the screen. 2RETURN 7 1 2 3 4 5 6 Brief Info Title Test.. DOLBY DIGITAL CNN Sat, Feb 21, 2009 Multilingual 10:40 AM 10:10 AM D CC Caption 11:40 AM 1080i TV-PG D L S V Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio. CC D 4:3 16:9 480i 480p 720p 1080i 1080p Caption : The program contains one or more caption services. Use the Q.
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. 1 Select the desired input source. ■ You can also select the desired input source in the INPUT menu. ENTER INPUT TV WATCHING TV / CHANNEL CONTROL HDMI4 AV2 HDMI3 Component1 HDMI2 ie) HDMI1 Component2 RGB-PC Disconnected inputs are inactive (grayed out) TV AV1 AV2 Component1 Component2 Input Label Exit Select a desired input source (except T V).
INPUT LABEL This indicates which device is connected to which input port. OPTION Move Enter OPTION Move Enter Menu Language : English Menu Language : English Audio Language : English Audio Language : English AV1 Input Label Input Label SIMPLINK : On SIMPLINK Key Lock : Off Key Lock Simple Manual Caption : Off Caption Set ID :1 Set ID : OffRGB-PC : 1 HDMI1 E E G HDMI2 HDMI3 HDMI4 Close With using OPTION menu With using INPUT button 1 MENU 1 2 Select OPTION.
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. Off Cinema ■ Game Sport ■ WATCHING TV / CHANNEL CONTROL 1 AV MODE ■ Press the AV MODE button repeatedly to select the desired source. ■ 2 ■ ENTER ■ If you select “Cinema” in AV mode, Cinema will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively. If you select “O f f” in AV mode, the “Picture Mode” and “Sound Mode” return to previous selected value.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
WATCHING TV / CHANNEL CONTROL SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus.
SIMPLINK Functions Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. ■ Select AV device: Enables you to select one of the AV devices connected to TV. ■ Disc playback: Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. ■ Power off all devices: When you power off the TV, all connected devices are turned off. ■ Switch audio-out: Offers an easy way to switch audio-out.
USB ENTRY MODES When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the USB menu. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the USB IN jacks on the side of TV. ■ USB IN When removing the USB device Select the USB Device menu before removing the USB device. USB IN 4 Memory Key 2 This TV supports JPG and MP3 files.
PHOTO LIST You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG ■ ■ ■ You can play JPG files only. Only baseline scan is supported among JPG. Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640 USB Screen Components 1 MENU 2 1 Moves to upper level folder 2 Preview: Display the thumbnail/folder name of the photo in the selected folder 3 ENTER Select U S B.
USB Photo Selection and Popup Menu Photo List Page 2/3 Drive1 JMJ001 1366x768, 125KB Up Folder Navigation USB Drive1 JMJ001 03/30/2008 06/10/2008 KY104 06/19/2008 KY102 04/03/2008 KY105 01/31/2008 JMJ001 01/01/2000 JMJ005 05/13/2008 JMJ002 06/15/2008 JMJ006 05/26/2008 JMJ003 04/03/2008 JMJ007 02/18/2008 JMJ004 02/18/2008 JMJ008 02/18/2008 Page 2/3 CH Page Change Up Folder MARK Mark Exit No Marked Up Folder 1366x768, 125KB 1 KY103 KY101 Popup Menu Photo List Naviga
Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode.
USB 6 ENTER Select the Slideshow, BGM, Delete, Option, or Hide. (Rotate), Use button to select the previous or next photo. ■ Use button to select and control the menu on the full-sized screen. ■ 1/17 Slideshow BGM Delete Option Hide USB Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show. ■ Set the time interval of the slide show in Option.
MUSIC LIST You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. USB Supported music file: *.MP3 Bit rate range 32 Kbps - 320 Kbps • Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz Screen Components 1 MENU 2 ENTER Select U S B. Select Music List.
USB Music Selection and Popup Menu Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the ENTER button, the current music in playback will stop. G Play Marked: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically.
■ The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time. USB ! NOTE G G G G When music is playing, is displayed in front of the music play time. A damaged or corrupted music file that does not play displays 00:00 as the play time. Music files with copy-protection will not play. Press ENTER, A , or RETURN button to stop the screen saver.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. HDMI/RGB-PC input source use 4:3 or 16:9 aspect ratio. But you can select all aspect ratios in HDMI-PC 1920X1080 input. You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting, aux).
4:3 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Zoom Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. Just Scan operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV (720p/1080i/1080p) input source.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to L o w, Recommended or Hig h, you can see the example of the changes you made. PICTURE Move Enter White Level Set the screen above identical to the Recommended sample below.
Complete Horizontal Sharpness Select (an) input(s) to apply the settings. Set the screen above identical to the Recommended sample below. DTV TV AV1 AV2 Recommended 50 E • H Sharpness High Component1 Component2 E Low RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 Next 8 Warning: The picture quality may vary according to the different types of signal and inputs. Previous E Move MARK Mark Confirm Vertical Sharpness Set the screen above identical to the Recommended sample below.
PICTURE CONTROL PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor.
MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter : 16:9 Picture Wizard E Energy Saving : Off • Backlight : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 70 E E Picture Mode E Aspect Ratio Enter E 1 MENU ■ 2 ENTER Select Picture Mode. ■ 3 ENTER 4 ENTER Select Vivid, Standard, Natural, Cinema, Sport, or Game.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the Picture Reset function for each Picture Mode.
EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in.
PICTURE CONTROL Color Temperature Dynamic Contrast ■ Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■ Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
Color Gamut Edge Enhancer Color Standard Color Filter xvYCC ■ Show clearer and distinctive yet natural edges in of the video. This function is enabled in "Picture Mode - Cinema, Expert". ■ Convert the color of a different video to HD color. ■ ■ This is the function to filter the specific colors of the video. You can use the RGB filter to set color saturation and hue accurately. *This feature is not available for all models. ■ This is the function to express richer color.
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption by lowering the backlight level. The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture M o d e.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE Enter Move E E • Contrast • Contrast 50 • Brightness 50 ? All picture • Sharpness 50 settings will be resetted. Continue? • Color 50 50 • Brightness 50 • Tint • Tint 0 R No • Picture Reset Screen (RGB-PC) 2 ENTER Select Picture Reset. ENTER Select Y e s. 50 • Color 50 • Picture Reset Screen (RGB-PC) PICTURE CONTROL Select PICTURE.
PICTURE CONTROL POWER INDICATOR - Except 32/42/47CL40 Adjust the power/standby indicator light of TV front.
DEMO MODE Displays a slide show to explain the various feature of this TV. OPTION Move Enter OPTION Move E E SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Caption : Off Caption : Off Set ID :1 Set ID :1 Power Indicator Power Indicator : Off Demo Mode : On Initial Setting : Store Demo Initial Setting On : Store Demo Select OPTION. 2 ENTER 3 ENTER 4 MENU Off Demo Mode Select Demo Mode.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Move AUDIO Enter Auto Volume : Off Auto Volume Clear Voice II : Off Clear Voice II • Level Balance Sound Mode 3 - + 0 L R 1 MENU Balance 3 0 Off - + L R On : Standard • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 E Select AUDIO. ENTER Select Clear Voice II. ENTER Select O n or O f f.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Enter AUDIO Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off • Level Balance Sound Mode 3 - + 0 L R : Standard • Level Balance Sound Mode • Treble 50 • Bass 50 ENTER 5 Select Sound Mode. 6RETURN Select Standard, Music, Cinema, Sport, or Game. ENTER Select Treble or Bass. + R • SRS TruSurround XT E Select AUDIO.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Auto Volume : Off Clear Voice II : Off • Level Balance 3 - + 0 L R SOUND & LANGUAGE CONTROL 4RETURN MENU 86 Clear Voice II : Off • Level Balance 3 - + L R : Standard Balance • SRS TruSurround XT: Off 50 • Treble 50 • Bass 50 • Bass 50 Select AUDIO. Select Balance. Make appropriate adjustments. Return to the previous menu. Return to TV viewing.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. In A V, Component, R G B and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a SRS System, turn off the TV’s internal speakers.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move Enter AUDIO Move E Sound Mode E • Level Balance 3 - + 0 L R : Standard • Level Balance Sound Mode • Treble 50 • Bass 50 SOUND & LANGUAGE CONTROL 88 1 MENU 2 ENTER Select AUDIO. Select Reset. 3 ENTER 4 MENU Initialize the adjusted value. Return to TV viewing.
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. F Multi Audio G English A 1Q. MENU 2 3Q. MENU Digital TV Select S A P. Select Mono, Stereo, or S A P. Return to TV viewing. 1Q. MENU 2 3Q. MENU Select Multi Audio. Select other languages.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Move Enter : English Audio Language : English Audio Language : EnglishEnglish Input Label : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Caption : Off Caption Set ID :1 Set ID SOUND & LANGUAGE CONTROL 4RETURN MENU 90 Select OPTION. Select Audio Language.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Move Enter : English Menu Language Audio Language : English Audio Language Input Label : On SIMPLINK : On Key Lock : Off Key Lock : Off Caption : Off Caption Set ID :1 Set ID ENTER 4RETURN MENU Select OPTION. Select Menu Language. Select your desired language. From this point on, the on-screen menus will be shown in the selected language.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock function. TIME Move Enter Clock TIME Move Off Time : Off On Time Sleep Timer Enter F Clock Manual : Off Month : Off On Time : Off Date 21 : Off Sleep Timer : Off Year 2009 Hour 10 AM 02 Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 MENU TIME SETTING 2 Select Clock.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode.
TIME SETTING SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Move Enter Clock TIME Move Enter Clock Off Time : Off Off Time : Off Off On Time : Off On Time : Off 10 min. Sleep Timer : Off Sleep Timer : Off 20 min. 30 min. 60 min. 90 min. 120 min. 180 min. 240 min. 1 MENU 2 ENTER Select Sleep Timer. TIME SETTING 3 ■ ■ ■ ENTER 4RETURN MENU 98 Select TI ME. Make appropriate adjustments.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
PARENTAL CONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 MENU 2 1 2 4 5 6 7 8 9 Enter : Off Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Select L O C K. Input the password. PARENTAL CONTROL / RATING 100 Select Lock System.
Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 MENU 2 1 2 4 5 6 7 8 9 Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Move Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter : Off New * * * * Confirm * * * * Close Select L O C K. 3 Input the password.
PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Ch. Change Navigation CH Page Change Previous Block/Unblock 1 MENU 2 1 2 3 4 5 6 7 8 9 ENTER Select L O C K. Input the password. 0 3 Select Block Channel.
MOVIE & TV RATING Movie Rating (MPAA) - For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
PARENTAL CONTROL / RATINGS TV Rating Children - For USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
TV Rating General - For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view.
PARENTAL CONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system.
TV Rating French - For CANADA Selecting Canadian French rating system. LOCK Move Lock System Enter : Off LOCK Move Lock System : Off Enter Blocking off : Permits all programs E Set Password Set Password G Block Channel Block Channel 8ans+ TV Rating-English TV Rating-English 13ans+ TV Rating-French TV Rating-French 16ans+ Downloadable Rating Downloadable Rating 18ans+ Input Block Input Block Blocking Off 1 MENU ENTER Select L O C K.
PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data.
EXTERNAL INPUT BLOCKING Enables you to block an input.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. ■ The remote control doesn’t work *This feature is not available for all models.
The audio does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS MODELS 37LH40 (37LH40-UA) 37LH41 (37LH41-UE) 42LH40 (42LH40-UA) 42LH41 (42LH41-UE) Dimensions (Width x Height x Depth) With stand 36.4 x 26.2 x 11.6 inches 40.7 x 28.3 x 11.6 inches 31.6 x 23.0 x 8.8 inches 804.4 x 586.3 x 223.8 mm 924.7 x 666.7 x 296.2 mm 1036.0 x 721.3 x 296.2 mm Without stand 31.6 x 20.8 x 3.1 inches 804.4 x 529.2 x 81.0 mm 36.4 x 23.6 x 3.5 inches 924.7 x 599.9 x 89.6 mm 40.7 x 25.8 x 3.5 inches 1036.0 x 655.4 x 89.
APPENDIX MODELS With stand 37.0 x 26.1 x 11.6 inches 940.8 x 665.2 x 296.2 mm 41.4 x 28.3 x 11.6 inches 1052.2 x 719.1 x 296.2 mm Without stand 37.0 x 23.7 x 3.5 inches 940.8 x 603.5 x 90.6 mm 41.5 x 25.8 x 3.5 inches 1052.2 x 657.3 x 90.8 mm Weight With stand Without stand 35.9 lbs / 16.3 kg 31.9 lbs / 14.5 kg 41.8 lbs / 19.0 kg 37.9 lbs / 17.2 kg 47LH55 (47LH55-UA) 55LH55 (55LH55-UA) Dimensions (Width x Height x Depth) With stand 46.1 x 31.0 x 13.2 inches 1173.4 x 789.7 x 337.4 mm 53.
IR CODES (Hexa) Code Function Note 08 POWER Remote control Button (Power On/Off) D6 45 Q.
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup i.
RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’.
APPENDIX Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k a b c d e f g h i j k l 00 ~ 01 (G p.119) (G p.119) (G p.119) 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 k m 00 ~ 01 COMMAND1 COMMAND2 19. Channel Tuning DATA (Hexadecimal) m a COMMAND1 COMMAND2 14.
01. Power (Command: k a) To control Power On/Off of the TV. You can also adjust mute using the MUTE button on remote control.
APPENDIX 11. Sharpness (Command: k k) 17. Color Temperature (Command: k u) To adjust screen sharpness. To adjust color temperature. You can also adjust sharpness in the PICTURE menu. You can also adjust color temperature in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][u][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) Data 00: Medium 01: Cool 02: Warm *Refer to ‘Real data mapping’.
Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ... Reserved Reserved 0 Main 0 Two 0 Use x 0 0 0 0 1 Sub 1 One 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 x x x x x x 1 1 1 1 The table above lists the binary code which must be converted to Hexadecimal before sending.
APPENDIX OPEN SOURCE LICENSE - This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license.
APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library.
APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
For an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
MOZILLA PUBLIC LICENSE Version 1.1 --------------code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or contributes to the creation of modifications. 1.2.
APPENDIX (c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license. (d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. APPENDIX 3.
3.5. 3.6. (c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.7. Required notices. You must duplicate the notice in exhibit A in each file of the source code.
APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
11. MISCELLANEOUS. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.