User manual

GP2
eng
❓ Motor Setting Option
• DiSEqC 1.2 : Control motor to change satellite dish position.
Drive Direction : Select the direction in which you want to move the motor.
Drive Mode : Two modes are available: Step and Continuous.
- Step: The motor moves based on the value you enter (from 1 to 128).
- Continuous: The motor moves continuously until you press the Stop.
Test TP : Select the test TP you want to tune.
Set Limit : Set the motor movement to east or west to have the motor move
only within the direction set.
- On: You can limit the movement to the current direction by selecting the
West/East.
- Off: You can cancel the limit you set.