Setup Guide

18
206-4278
USB Conguration
The TV Manager / USB Download Menu provides options that enable you to download individual
conguration or software les individually to the TV. You can also use the Ez Download utility available
from the menu to select one of each type of le to be downloaded at one time using one process.
Each of the TV Manager / USB Download Menu functions requires that you have the appropriate
le(s) loaded on a USB memory device. If you wish to perform a software update or download a
splash screen image, the software/image le(s) must be stored in a folder named “LG_DTV” in the
root directory of the USB device. Clone/Conguration (.tlx) les should simply be stored in the root
directory of the USB device. The procedure below assumes that the desired le(s) is/are already
loaded onto the USB device. For further information on TV Manager / USB Download Menu functions
and le requirements, and/or for information on creating Clone or FTG Conguration (.tlx) les, refer
to the appropriate section(s) in this document.
Before You Begin
• If you intend to use the Zoning feature on this TV, make sure to assign the appropriate TV Zone #
in the EZ-Manager’s Zone, Label, and Room Number screen BEFORE continuing with USB
Conguration. See “TV Conguration Options” on page 13 for further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating les to be downloaded, avoid using special characters (?, &, @, etc.) in lenames.
• Refer to “Ez Download Utility” on pages 19 to 21 for further information on the Ez Download utility.
• Refer to “Custom Master TV Setup” on pages 32 to 34 for information on creating a Clone (.tlx)
file, and/or refer to “Creating an FTG Conguration File” on pages 39 to 40 for information on
creating an FTG Conguration (.tlx) le for FTG Mode via CPU conguration.
• See Reference section, “Downloading a Splash Screen Image using a USB Memory Device,” for
splash screen image guidelines.
• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further
information on software updates.
USB Conguration via EZ-Manager Wizard
With either the TV Conguration Options or the Zone, Label, and
Room Number screen on display, proceed as follows to congure the
TV using the USB memory device.
1. Insert the USB memory device with the appropriate le(s) into
the TV’s USB port.
2. Use the arrow keys on the Installer Remote to select USB
Conguration, and then press OK. You will be redirected to the
TV’s TV Manager / USB Download Menu (see example at right).
3. Select the appropriate option from the TV Manager / USB
Download Menu, and complete the download(s) as required.
Note: If you perform a software update, the TV will complete the
update and then reboot. Upon restart, the TV will display the
EZ-Manager TV Configuration Options screen. If desired, you can
re-access the USB Download Menu (to perform additional functions),
proceed with conguration via the wizard, or exit the wizard.
4. Remove the USB memory device, and verify that the appropriate
configuration/update(s) is/are resident on the TV.
EZ-Manager Wizard (Cont.)
TV Manager
USB
Diagnostics
Previous
OK
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Note: You can press on the
Installer Remote at any time to
return to the EZ-Manager Wizard.