LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS 32LC5DC 32LC50CS 32LC5DCS 32LC50CB 32LX50C 32LC5DCB 37LC5DC 32LX50CS 37LC50C 37LC5DCB 37LC5DC1 37LC50CB 42LC5DC 42LB50C 42LC50C 32LX5DC 32LX5DCS 32LG500H 37LG500H 42LB5DC 42LG500H 32LC50C PLASMA TV MODEL 42PX8DC 42PG65C 42PG60C Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTION 2 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . A SAFETY INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Back Panel Information . . . .
FEATURES OF THIS TV On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. FOR LCD TV PREPARATION If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.
PREPARATION LCD TV model only Option Extras x2 M4xL22 Torx plus Star head screw (Refer to p.7, 15) Protective Bracket and Bolt for Power Cord PREPARATION (This feature is not available for all models.) D-sub 15 pin Cable (Refer to P.12-13, 15) Only 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C models Cable Holder 1-Bolt for fixing the Cable Management Cable Holder (Refer to p.12) (Refer to p.12-13) (Refer to p.12-13) 4-Bolts for stand assembly (Refer to p.
FRONT PANEL CONTROLS ■ Here shown may be somewhat different from your TV. 32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C PREPARATION CH CHANNEL Buttons VOL VOLUME Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in standby mode. Illuminates green when the TV is switched on. x4 Tighten the stand with the four screws (provided as parts of the TV).
PREPARATION 32LX5DC*, 32LX50C* PREPARATION Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in standby mode. Illuminates green when the TV is switched on. CH VOL ENTER MENU INPUT ON/OFF ON/OFF Button INPUT Button MENU Button ENTER Button VOLUME Buttons CHANNEL Buttons 32/37/42LG500H CH Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
42PX8DC INPUT ENTER PREPARATION This TV’s stand is sold, separately. INPUT Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in standby mode. Illuminates green when the TV is switched on. MENU ENTER VOL CH POWER Button INPUT Button MENU Button ENTER Button VOLUME Buttons CHANNEL Buttons 42PG60C, 42PG65C Remote Control Sensor POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
PREPARATION BACK PANEL INFORMATION Here shown may be somewhat different from your TV. 32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C 32LX5DC*, 32LX50C* 42PX8DC S-VIDEO R AUDIO RL/MONO VIDEO S-VIDEO 8 AV IN 2 ANTENNA IN 8 AV IN 2 11 11 M.P.I. 42PG60C, 42PG65C NTENNA IN S-VIDEO VIDEO OR VIDEO L/MONO AUDIO PREPARATION 11 AV IN 2 A O R L/MONO AUDIO ■ 32/37/42LG500H M.P.I. S-VIDEO ) VIDEO L/MONO AUDIO R ( 8 AV IN 2 AV IN 2 11 11 ( ) ANTENNA IN ANTENNA IN M.P.I. M.P.I.
42PG60C, 42PG65C 6 10 RGB IN DIGITAL AUDIO OUT RJP SPEAKER INTERFACE OUT 8 AUDIO (RGB / DVI) RGB(PC) 2 7 REMOTE CONTROL OUT OPTICAL 4 1 SERVICE ONLY COMPONENT IN L DVI IN AUDIO VIDEO 9 AUDIO S-VIDEO R 1 VIDEO L (MONO) PREPARATION 2 UPDATE RESET AV IN 1 HDMI IN R 8 5 32/37/42LG500H 1 OPTICAL DIGITAL SPEAKER OUT AUDIO OUT 8 6 HDMI/DVI IN RESET RGB IN 2 1(DVI) RGB(PC) UPDATE AUDIO (RGB/DVI) RS-232C IN (SERVICE ONLY) AV IN 1 RJP INTERFACE AUDIO VIDEO 10 COMPONENT IN
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. (This feature is not available for all models.) Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident. 1 PREPARATION 2 PROTECTIVE BRACKET Install the CABLE HOLDER as shown.
(This feature is not available for all models.) To separate the CABLE HOLDER, loosen the bolt installed the set. 2 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident. PREPARATION 1 PROTECTIVE BRACKET 3 Install the CABLE HOLDER as shown.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. 42PG60C, 42PG65C 42PX8DC 1 Hold the CABLE MANAGEMENT with both hands and pull it as shown. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. (Except 42PG60C model) If your TV has CABLE HOLDER, fix it as shown and bundle the cables. PREPARATION 1 45° 2 Connect the cables as necessary.
32/37/42LG500H BACK COVER FOR WIRE ARRANGEMENT 1 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. PREPARATION Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PLUG IN TYPE HOLDER for power code and PROTECTIVE BRACKET/Screw.
PREPARATION STAND INSTALLATION 32/37LC5DC*, 32/37LC50C* Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. PREPARATION 1 3 16 42PG65C 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. NOTE G After inserting the MPI slot/card, install the product stand. 2 Assemble the product stand with the product as shown.
ATTACHING THE TV TO A WALL This feature is not available for all models. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
PREPARATION ATTACHING THE TV TO A DESK ■ Here shown may be somewhat different from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
32/37/42LG500H Stand 1-Screw (provided as parts of the product) Desk PREPARATION WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. ■ This feature is not available for all models.
PREPARATION ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. PREPARATION Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket ANTENNA IN M.P.I.
EXTERNAL EQUIPMENT SETUP ■ ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of external equipment setup mainly use picture for LCD TV(Except 32/37/42LG500H) models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the digital set-top box to H D M I / D V I I N 1 ( D V I ) or 2 jack on the set. 2 No separated audio connection is necessary. HDMI supports both audio and video. HDMI/DVI IN M.P.I 2 1(DVI) 2. How to use ■ ( ) ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
When connecting HDMI to DVI cable DIGITAL AUDIO OUT (OPTICAL) HDMI/DVI IN RESET SERVICE ONLY M.P.I. 1(DVI) UPDATE REMOTE CONTROL OUT RGB IN VIDEO RJP INTERFACE AUDIO COMPONENT IN S-VIDEO (MONO) AUDIO AV IN 1 VIDEO SPEAKER AUDIO IN OUT (RGB, DVI) 8 1 2 DVI-DTV OUTPUT L EXTERNAL EQUIPMENT SETUP 2 R 1. How to connect 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 ( D V I ) or 2 jack on the set.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect 1 EXTERNAL EQUIPMENT SETUP 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. 2. How to use PB PR 1 ■ Select C o m p o n e n t input source with using the I N P U T button on the remote control.
When connecting with an S-Video cable AUDIO 1. How to connect 1 Connect the S-VIDEO output of the DVD to the S - V I D E O input on the set. 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the set. ■ Turn on the DVD player, insert a DVD. ■ ■ Select A V 1 input source with using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source. ■ Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
( ANT IN S-VIDEO ANT OUT OUTPUT SWITCH When connecting with a RCA cable 1. How to connect 1 V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) M.P.I. TAL DIO UT CAL) ) L VIDEO R 1 RESET SERV REMOTE CONTROL OUT M.P.I. UPDATE ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder 1. How to connect Video Game Set 1 V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) VIDEO L R ■ Select A V 2 input source with using the I N P U T button on the remote control. ■ If connected to A V I N 1 input, select A V 1 input source. ■ Operate the corresponding external equipment.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable SERVICE ONLY 1. How to connect REMOTE CONTROL OUT ATE ( ( ) ) RGB IN 1 (MONO) VIDEO 2 AUDIO IN (RGB, DVI) SPEAKER OUT 8 AUDIO AV IN 1 EXTERNAL EQUIPMENT SETUP Connect the RGB output of the PC to the R G B I N jack on the set. Connect the PC audio output to the A U D I O I N ( R G B , D V I ) jack on the set. 2.
EXTERNAL EQUIPMENT SETUP NOTES G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear.
* 42LB5DC, 42LB50C Supported Display Specifications (RGB/HDMI1-PC) Horizontal Frequency(KHz) Vertical Frequency(Hz) 31.469 70.08 640x480 31.469 37.861 37.500 Supported Display Specifications (HDMI2-DTV) Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480 31.500 31.469 60.00 59.94 59.94 72.80 75.00 1280x720 44.960 45.000 59.94 60.00 800x600 35.156 37.879 48.077 46.875 56.25 60.31 72.18 75.00 1920x1080 33.720 33.750 67.500 59.94 60.00 60.00 1024x768 48.363 56.476 60.023 60.00 70.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. External input modes rotate in regular sequence: TV, AV1INPUT 2, Component, RGB, HDMI1/DVI and HDMI2.
(Only 42PG60C, 42PG65C, 32/37/42LG500H models) TV POWER DVD CC INPUT VCR STB RATIO MODE Select the remote’s operating mode: TV, DVD, VCR (or STB). RATIO Change the aspect ratio. G p.43- 4 4 CC Select a closed caption. G p.62 (*In DTV/CADTV mode G p.63) THUMBSTICK Navigate the on-screen menus and adjust the system set(Up/Down/Left tings to your preference. ENTER /Right/ENTER) EXIT(or Clears all on-screen displays and returns to TV viewing RETURN) from any menu.
WATCHING TV /CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the (or O N / O F F) button on the TV or press the POWER button on the remote control. 1 WATCHING TV / CHANNEL CONTROL 2 Select the viewing source by using the INPUT(or TV INPUT) button on the remote control. ■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use menu. 2 Press the G or available menus.
WATCHING TV /CHANNEL CONTROL CHANNEL SETUP Auto Scan (EZ Scan) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run EZ Scan again after any Antenna/Cable connection changes. A password is required to gain access to EZ Scan menu if the Lock System is turned on. WATCHING TV / CHANNEL CONTROL SETUP VIDEO 1 Press the M E N U button and then use D or E or or button to select the S E T U P menu.
Add/Delete Channel (Manual Scan) A password is required to gain access to Manual Scan menu if the Lock System is turned on. 1 Press the M E N U button and then use D or E or or button to select the SETUP menu. AUDIO TIME OPTION EZ Scan Manual Scan Channel Edit DTV Signal Channel Label SCREEN LOCK 2 Press the G or button and then use D or E or or button to select Manual Scan. 1 3 Press the G or button and then use D or E or T V, C A T V), or button to select Analog(T D T V, C A D T V).
WATCHING TV /CHANNEL CONTROL Channel Editing A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black, and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen. A password is required to gain access to Manual Scan menu if the Lock System is turned on.
DTV SIGNAL STRENGTH This feature displays the DTV signal levels being received and indicates whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. DTV Signal: This function is only available when the input signal is DTV or CADTV. 1 Press the M E N U button and then use D or E or or button to select the S E T U P menu.
WATCHING TV /CHANNEL CONTROL CHANNEL LABEL Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel. WATCHING TV / CHANNEL CONTROL SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the S E T U P menu.
PICTURE CONTROL WATCHING DW (DOUBLE WINDOW) Double Window mode splits the screen into two images, allowing two picture sources to be shown on the TV screen at the same time. Each source is given half the screen. Watching Double Window Press the P I P button to access the sub picture. DW Mode PIP Off PICTURE CONTROL Selecting an Input Signal Source for Double Window Use the P I P I N P U T button to select the input source for the sub picture. Each press of P I P I N P U T button changes the PIP source.
PICTURE CONTROL TV Program Selection for PIP 1 Use the P I P C H + / - button to select a channel for the sub picture. The selected channel number is displayed just below the input source of main picture. Swapping the PIP / Double Window PICTURE CONTROL 42 1 Repeatedly, use the S W A P or P I P S W A P button to switch the main and sub pictures. ■ Component, RGB, HDMI1/DVI, HDMI2 input sources for the main picture can’t be used to swap the main and sub pictures.
PICTURE SIZE (ASPECT RATIO) CONTROL This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio. 1 Press the RATIO button repeatedly to select the desired picture format. ■ You can also adjust A s p e c t R a t i o in the O P T I O N menu.
PICTURE CONTROL Horizon The screen size is, more enlarged at both sides, to create a spectacular view. Horizon PICTURE CONTROL Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom 1 Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.
PRESET PICTURE SETTINGS EZ Picture - Preset EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. Daylight, Normal, Night Time Settings are preset for the optimum picture quality at the factory and are not adjustable. In the U s e r 1 and U s e r 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
PICTURE CONTROL Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting EZ Picture (User 1 and User 2), you can choose the Color Temperature. SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the V I D E O menu.
MANUAL PICTURE ADJUSTMENT EZ Picture - User Mode Adjust the picture appearance to suit your preference and viewing situations. This feature operate only if the EZ Picture set User 1 or User 2. SETUP 1 EZ Picture VIDEO Press the M E N U button and then use D or E or or button to select the V I D E O menu. Color Temperature AUDIO XD TIME Advanced Reset SCREEN LOCK 2 Press the G or button and then use D or E or or button to select E Z P i c t u r e.
PICTURE CONTROL Color Tone - User Mode You can also adjust the detailed settings (Red, Green, Blue) by selecting the C o l o r T e m p e r a t u r e - U s e r menu. SETUP 1 Press the M E N U button and then use D or E or or button to select the V I D E O menu. VIDEO AUDIO TIME PICTURE CONTROL OPTION EZ Picture Color Temperature XD Advanced Reset SCREEN 2 Press the G or button and then use D or E or or button to select C o l o r T e m p e r a t u r e.
XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically changed to Auto. When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD color and XD Noise.
PICTURE CONTROL ADVANCED - CINEMA MODE Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog, AV1, AV2, and Component 480i mode. SETUP VIDEO 1 Press the M E N U button and then use D or E or or button to select the V I D E O menu.
ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1, AV2, HDMI1/DVI, or HDMI2mode. SETUP 1 Press the M E N U button and then use D or E or or button to select the V I D E O menu. VIDEO AUDIO TIME Color Temperature XD Advanced Reset SCREEN 2 Press the G or button and then use D or E or or button to select A d v a n c e d.
PICTURE CONTROL PICTURE RESET Use to quickly reset all the Video menu options to their original factory preset values. SETUP VIDEO AUDIO TIME OPTION 1 Press the M E N U button and then use D or or button to select the VIDEO menu. 2 button and then use D or E or Press the G or or button to select Reset. E XD Advanced Reset LOCK 1 SETUP AUDIO PICTURE CONTROL Press the G or button to reset the Video menu options to original values.
IMAGE STICKING MINIMIZATION(ISM) METHOD A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen. 1 Press the M E N U button and then use D or E or or button to select the OPTION menu. 2 button and then use D or E or Press the G or or button to select ISM Method.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (EZ SOUNDRITE) Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. SoundRite makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. SETUP VIDEO 1 Press the M E N U button and then use D or E or or button to select the A U D I O menu.
PRESET SOUND SETTINGS (EZ SOUND) EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Normal, Stadium, News, Music and Theater are preset for good sound quality at the factory and are not adjustable. 1 ■ Press E X I T or R E T U R N button to return to TV viewing. You can also adjust E Z S o u n d in the AUDIO menu.
SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. SETUP VIDEO 1 Press the M E N U button and then use D or E or or button to select the A U D I O menu. AUDIO TIME OPTION Audio Language EZ SoundRite EZ Sound Balance 0 TV Speakers SCREEN LOCK 2 Press the G or button and then use D or E or or button to select E Z S o u n d. 1 3 button and then use D or E or Press the G or or button to select U s e r.
BALANCE ADJUSTMENT Adjust the left/right sound of speaker to suit your taste and room situations. SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the A U D I O menu. AUDIO TIME OPTION Audio Language EZ SoundRite EZ Sound Balance 0 TV Speakers SCREEN LOCK SOUND & LANGUAGE CONTROL 2 Press the G or button and then use D or E or or button to select B a l a n c e. 1 3 Press the G or button and then use F or G or or button to make appropriate adjustments.
SOUND &LANGUAGE CONTROL TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. SETUP 1 Press the M E N U button and then use D or E or or button to select the A U D I O menu. VIDEO AUDIO TIME OPTION Audio Language EZ SoundRite EZ Sound Balance 0 TV Speakers SCREEN SOUND & LANGUAGE CONTROL 58 2 Press the G or button and then use D or E or or button to select T V S p e a k e r s. 3 Press the G or button and then use D or E or or button to select O n or O f f.
STEREO/SAP BROADCAST SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting.
SOUND &LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the A U D I O menu. AUDIO TIME OPTION Audio Language EZ SoundRite EZ Sound Balance 0 TV Speakers SCREEN LOCK SOUND & LANGUAGE CONTROL 60 2 Press the G or button and then use D or E or or button to select A u d i o L a n g u a g e.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. SETUP 1 Aspect Ratio VIDEO Press the M E N U button and then use D or E or or button to select the O P T I O N menu. Caption/Text AUDIO Caption Options TIME Language OPTION ISM Method SCREEN Low Power LOCK Set ID Press the G or button and then use D or E or or button to select L a n g u a g e .
SOUND &LANGUAGE CONTROL CAPTION / TEXT Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Text displays information, usually at the bottom position and is used for a data service, generally not program related. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the O P T I O N menu. AUDIO TIME Aspect Ratio Caption/Text Caption Options Language OPTION SCREEN Low Power LOCK Press the G or button and then use D or E or T e x t.
SOUND &LANGUAGE CONTROL CAPTION OPTIONS Customize the DTV/CADTV captions that appear on your screen. SETUP VIDEO Press the M E N U button and then use D or E or or button to select the O P T I O N menu. 1 AUDIO TIME Aspect Ratio Caption/Text Caption Options Language OPTION SCREEN ISM Method Low Power LOCK Set ID SOUND & LANGUAGE CONTROL Press the G or button and then use D or E or or button to select C a p t i o n O p t i o n s.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. The factory default value of the Auto Clock is Off, because a clock information sent each broadcasting station is different.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. SETUP 1 Press the M E N U button and then use D or E or or button to select the T I M E menu. Auto Clock VIDEO Manual Clock AUDIO Off Timer TIME On Timer OPTION Auto Off SCREEN 2 Press the G or button and then use D or E or or button to select M a n u a l C l o c k. 3 Press the G or button and then use F or G or or to select either the year, date, or time option.
AUTO ON/OFF TIMER SETTING The timer function operates only if the current time has been set. The Off-Timer function overrides the On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode. 1 Press the M E N U button and then use D or E or or button to select the T I M E menu.
TIME SETTING AUTO SHUT-OFF SETTING If set to on and there is no input signal, the TV turns off automatically after 10 minutes. SETUP 1 Auto Clock VIDEO Press the M E N U button and then use D or E or or button to select the T I M E menu. Manual Clock AUDIO Off Timer TIME On Timer OPTION Auto Off SCREEN 2 LOCK Press the G or button and then use D or E or or button to select A u t o O f f. 1 TIME SETTING 3 Press the G or button and then use D or E or or button to select O n or O f f.
SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 1 Press the T I M E R button repeatedly to select the number of minutes. First the O f f option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the E N T E R button. The timer begins to count down from the number of minutes selected.
SCREEN ADJUSTMENT AUTO CONFIGURE (RGB [PC] MODE ONLY) Automatically adjusts picture position and minimizes image shaking. Although the image is still not correct, your set is functioning properly but needs further adjustment. SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the S C R E E N menu. AUDIO TIME Auto config. Manual config. XGA Mode Reset OPTION SCREEN LOCK 2 Press the G or button and then use D or E or or button to select A u t o c o n f i g ..
MANUAL CONFIGURE If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode: RGB-PC, RGB-DTV, Component 480p/720p/1080i, HDMI 480p/720p/1080i. The Phase, Clock functions work in the following mode: RGB-PC mode. 1 Press the M E N U button and then use D or E or or button to select the S C R E E N menu.
SCREEN ADJUSTMENT SELECTING XGA MODE To see a normal picture, match the resolution of RGB mode and selection of XGA mode. This function works in the following mode: RGB-PC mode. If you select the 1600x1200, 1920x1200 resolution, u X G A m o d e is displayed. SETUP VIDEO 1 Press the M E N U button and then use D or E or or button to select the S C R E E N menu. AUDIO TIME Auto config. Manual config.
INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) This function operates in current mode. To initialize the adjusted value. SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the S C R E E N menu. AUDIO TIME Auto config. Manual config. XGA Mode Reset OPTION SCREEN LOCK 2 Press the G or button and then use or button to select R e s e t. D or E or 1 3 Press the G or button. SETUP AUDIO TIME Auto config. Manual config.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done: 1.
Set Password Change the password by inputting a new password twice. For USA SETUP After inputting the password, use the D or E or or button to choose S e t p a s s w o r d. 1 VIDEO AUDIO TIME OPTION Press the G or button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m. Then your changed password has been memorized.
PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. For USA SETUP VIDEO AUDIO TIME 1 After inputting the password, use the D or E or or button to choose B l o c k C h a n n e l. OPTION SCREEN For Canada Lock System Lock System Set Password Set Password Block Channel Block Channel TV Rating-English Movie Rating TV Rating-French TV Rating-Children Aux.
MOVIE & TV RATING Movie Rating (MPAA) -for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. SETUP VIDEO After inputting the password, use the D or E or or button to choose M o v i e R a t i n g.
PARENTAL CONTROL /RATINGS TV Rating Children -for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. SETUP VIDEO AUDIO TIME OPTION 1 2 After inputting the password, use the D or E or button to choose T V R a t i n g - C h i l d r e n.
TV Rating English - for CANADA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. SETUP VIDEO AUDIO TIME OPTION 1 2 After inputting the password, use the D or E or button to choose T V R a t i n g - E n g l i s h.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 32LC5DC/S/B (32LC5DC/S/B-UA) 32LC50C/S/B (32LC50C/S/B-UA) 37LC5DC/1/B (37LC5DC/1/B-UA) 37LC50C/B (37LC50C/B-UA) 42LC5DC (42LC5DC-UA) 42LC50C (42LC50C-UA) 32LX5DC/S (32LX5DC/S-UA) 32LX50C/S (32LX50C/S-UA) Width x Height x Depth (inches/mm) With Stand 31.8 x 23.9 x 9.8 inches 806.6 x 607.5 x 249.0 mm 31.8 x 21.7 x 3.8 inches 806.6 x 552.3 x 97.2 mm Without Stand 33.7 pounds / 15.3kg 27.6 pounds / 12.
APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button.
VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 033 034 041 067 068 012 031 033 067 SAMSUNG 043 046 124 146 MARANTZ 069 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153
APPENDIX SET ID Use this function to specify a TV ID number. SETUP 1 VIDEO Press the M E N U button and then use D or E or or button to select the OPTION menu. AUDIO TIME Aspect Ratio Caption/Text Caption Options Language OPTION SCREEN ISM Method Low Power LOCK 2 Press the G or button and then use or button to select Set ID. D Set ID or E or 1 3 Press the G or button and then use D or E or or button to adjust Set ID to choose the desired TV ID number. The adjustment range of Set ID is 1~99.
IR CODES (Hexa) Code Function Note 0F TV INPUT Remote control Button (Some models) D6 0B INPUT Remote control Button 08 POWER Remote control Button (Power On/Off) 98 MULTI Remote control Button (Some models) 79 RATIO Remote control Button 0E TIMER Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (Dash) Remote control Button 1A FLASH BACK Remote control Button 09 MUTE Remote control Button 02 VOL + Remote control Button 03 VOL - Remote control Butto