User’s Guide Specification 1. Model Description MODEL 22/26/32/ 37/42LG300C-ZA SUFFIX 2. EU 담 당 관 리 자 JMJ 08.03.06 KIM JONG OK 08.03.06 LG BRAND Part No. Product Name MFL34441619 (0810-REV03) 22/26/32/37/42LG300C-ZA Printing Specification 1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors • Cover : 1 COLOR (BLACK) • Inside : 1 COLOR (BLACK) 3. Stock (Paper) • Cover : Coated paper, S/W 150 g/㎡ • Inside : Uncoated paper , 백상지 60 g/㎡ 4. Printing Method : Off-set 5.
P/NO.
ENGLISH LCD TV OWNER’S MANUAL LCD TV MODELS 2 2 L G 3 0* * 2 6 L G 3 0* * 3 2 L G 3 0* * 3 7 L G 3 0* * 4 2 L G 3 0* * Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
ACCESSORIES Batteries Owner’s Manual ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. Dual Lock™ (This feature is not available for all models.) (Refer to P.11) Remote Control This feature is not available for all models. Polishing Cloth Protective Bracket and Bolt for Power Cord (This feature is not available for all models.
CONTENTS ACCESSORIES ............................................. 1 CONTENTS PREPARATION Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 6 Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Please set it up carefully so the product does not fall over . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Back Cover for Wire Arrangement . . . . . . . . . . . . .
SOUND & LANGUAGE CONTROL Teletext within Digital Service . . . . . . . . . . . . . . . 78 Teletext in Digital Service . . . . . . . . . . . . . . . . . . 78 APPENDIX CONTENTS Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 59 Preset Sound Settings - Sound Mode . . . . . . . . . . 60 Sound Setting Adjustment - User Mode . . . . . . . . . . 61 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION FRONT PANEL CONTROLS ■ ■ Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth. PREPARATION 22LG30** INPUT MENU INPUT MENU OK VOLUME OK - PROGRAMME + - P + POWER Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in the OPTION Clock LED 4 menu.
PREPARATION 26/32/37/42LG30** + P - PROGRAMME + VOLUME - OK OK MENU MENU Clock LED INPUT POWER Remote Control Sensor INPUT Power/Standby Indicator • illuminates red in standby mode. • illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in the OPTION menu.
( ) PREPARATION BACK PANEL INFORMATION A Image shown may differ from your TV. PREPARATION PCMCIA CARD SLOT 22LG30** 1 3 4 5 MONO AUDIO R VIDEO L/MONO 2 13 HDMI/DVI IN 14 AV V IN 2 ( 6 7 8 9 10 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 2 HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
( 1 3 4 5 MONO AUDIO R VIDEO L/MONO 2 13 PREPARATION PCMCIA CARD SLOT 26/32/37/42LG30** ) 14 AV V IN 2 ( 6 7 8 9 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 2 HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. 3 RGB/DVI Audio Input Connect the audio from a PC or STB with DVI output.
Stand installation A Image shown may differ from your TV. For 22LG30** For 26/32/37/42LG30** PREPARATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. Insert the S T A N D B O D Y into a C O V E R B A S E until clicking sound. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. ■ ■ 1 PREPARATION ■ You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT A Image shown may differ from your TV. For 22LG30** For 26/32/37/42LG30** PREPARATION Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident. 1 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
Attaching the TV to a desk (Only 26/32/37/42LG30**) The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. Stand PREPARATION 1-Screw (provided as parts of the product) Desk ! WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
PREPARATION POSITIONING YOUR DISPLAY (Only 22LG30**) • Tilt range ■ ■ PREPARATION Image shown may differ from your TV. Adjust the position of the panel in various ways for maximum comfort. 12 0 0 3 LOCATION (Only 22LG30**) Position your TV so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the tv to any unnecessary vibration, moisture, dust or heat. Also ensure that the TV is placed in a position to allow a free flow of air.
PROTECTION COVER ■ Image shown may differ from your TV. For 22LG30** For 26/32/37/42LG30** Loose the bolts from TV. 2 Bend the H I N G E B O D Y and pull it backward. When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the P R O T E C T I O N C O V E R into the TV until clicking sound. PREPARATION 1 or HINGE BODY 3 Insert the P R O T E C T I O N C O V E R into the TV.
■ ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. EARTHING PREPARATION Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 26LG30** models. HD RECEIVER SETUP ■ PREPARATION 16 This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting a set-top box with an HDMI cable 1 Connect the HDMI output of the digital set-top box to the H D M I / D V I I N 1 ( D V I ) or H D M I / D V I I N 2 jack on the TV. EXTERNAL EQIPMENT SETUP 2 HDMI/DVI IN Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 1 3 Select HDMI1 or HDMI2 input source using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable EXTERNAL EQIPMENT SETUP 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. 2 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. 3 Turn on the DVD player, insert a DVD. 4 Select C o m p o n e n t input source using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
Connecting the HDMI cable Connect the HDMI output of the DVD to the H D M I / D V I I N 1 ( D V I ) or H D M I / D V I I N 2 jack on the TV. 2 Select H D M I 1 or H D M I 2 input source using the I N P U T button on the remote control. 3 Refer to the DVD player's manual for operating instructions. 1 ! NOTE G The TV can receive video and audio signals simultaneously when using a HDMI cable. G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
EXTERNAL EQUIPMENT SETUP VCR SETUP ■ ■ To avoid picture noise (interference), allow adequate distance between the VCR and TV. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible. When connecting with a RF Cable EXTERNAL EQIPMENT SETUP ANT OUT S-VIDEO ANT IN OUTPUT SWITCH VIDEO L 1 2 Wall Jack Antenna 20 1 Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
Connecting with a Euro Scart cable Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select A V 1 input source using the I N P U T button on the remote control. EXTERNAL EQIPMENT SETUP 1 1 ! NOTE G Any Euro scart cable used must be signal shielded. AUDIO/ VIDEO (R) AUDIO (L) Connecting with a RCA cable L V I D E O jacks between TV and Connect the A U D I O/V VCR.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set 1 V I D E O jacks between TV and Connect the A U D I O/V external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) EXTERNAL EQIPMENT SETUP 2 3 Select A V 2 input source using the I N P U T button on the remote control. Operate the corresponding external equipment. Refer to external equipment operating guide.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable Connect the RGB output of the PC to the R G B I N ( P C ) jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 3 Turn on the PC and the TV 4 Select R G B input source using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution RGB[PC], HDMI[PC] mode Resolution 720x400 EXTERNAL EQIPMENT SETUP 640x480 800x600 832x624 1024x768 1280x768 1360x768 1366x768 1400x1050 1680x1050 HDMI[DTV] mode Horizontal Frequency(kHz) Vertical Frequency(Hz) 31.469 31.469 37.684 37.879 46.875 49.725 48.363 56.470 60.123 47.78 47.72 47.56 64.744 62.290 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 59.948 59.
! NOTE G To G If using a sound card, adjust PC sound as required. TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Screen Reset Returns to the default settings Position, Size and Phase at the factory. This function works in the following mode : RGB[PC]. EXTERNAL EQIPMENT SETUP PICTURE Move OK SCREEN Move BACK Prev. D • Contrast : 70 • Brightness : 50 • Sharpness : 50 • Colour : 50 • Tint :0 • Advanced Control • Picture Reset Screen 1MENU Resolution Auto Config. To Set Position Size Phase Reset G Select PICTURE. 2 OK Select SCREEN. OK Select Reset.
Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. Move OK SCREEN BACK Move Prev. D • Contrast : 70 • Brightness : 50 • Sharpness : 50 • Colour : 50 • Tint :0 • Advanced Control • Picture Reset Resolution Auto Config.
EXTERNAL EQUIPMENT SETUP Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode. EXTERNAL EQIPMENT SETUP PICTURE Move OK SCREEN Move BACK Prev. D • Contrast : 70 • Brightness : 50 • Sharpness : 50 • Colour : 50 • Tint :0 • Advanced Control • Picture Reset Resolution Auto Config. Position 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Size Phase Screen 1MENU G Reset Select PICTURE.
Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. PICTURE Move OK SCREEN Move BACK Prev. D • Contrast : 70 • Brightness : 50 • Sharpness : 50 • Colour : 50 • Tint :0 • Advanced Control • Picture Reset Resolution Auto Config.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the TV on from standby or off to standby. D/A TV Selects digital or analogue mode. Switches the TV on from standby. INPUT External input mode rotate in regular sequence. Switches the TV on from standby. WATCHING TV / PROGRAMME CONTROL TV/RADIO Selects Radio or TV channel in digital mode. I/II Selects the sound output. MUTE Switches the sound on or off.
1 TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 Coloured These buttons are used for teletext (on T E L E T E X T buttons models only) or P r o g r a m m e e d i t. SLEEP Sets the sleep timer. SUBTITLE Recalls your preferred subtitle in digital mode. WATCHING TV / PROGRAMME CONTROL RATIO Selects your desired picture format.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV - When your TV is turned on, you will be able to use its features. WATCHING TV / PROGRAMME CONTROL 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the r / I, INPUT or P + button on the TV or press the POWER, INPUT, P + - or NUMBER button on the remote control and the TV will switch on.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP Move OK PICTURE Aspect Ratio Picture Mode Move : 16:9 : Vivid • Backlight • Contrast • Brightness • Sharpness • Colour • Tint 100 100 50 70 70 0 OK R G E AUDIO SETUP PICTURE TIME Auto Volume Balance Sound Mode AUDIO OPTION LOCK Move OK : Off : Standard • 120Hz • 200Hz • 500Hz • 1.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted.
MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. Move SETUP OK Auto tuning Manualtuning tuning Manual Move Auto tuning Manual Manualtuning tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information Programme Edit Booster : On Software Update : Off Diagnostics CI Information OK F DTV G Your receiver will add this channel to your channel list. UHF CH. Bad 30 Normal Good ADD Close 1MENU Select SETUP.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
A Assigning a station name You can assign a station name with five characters to each programme number. 1MENU 5 Select SETUP. OK OK Select Manual Tuning. 6 3 OK OK Select Close. OK Select Store. Select TV. 7 4 Select Name. A Fine Tuning WATCHING TV / PROGRAMME CONTROL 2 Select the position and make your choice of the second character, and so on. You can use an the alphabet A to Z , the number 0 to 9 , +/ -, and blank. Normally fine tuning is only necessary if reception is poor.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P + / - button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu This function enables you to skip the stored programmes. In some countries it is possible to move a programme number by using the YELLOW button only.
(IN DTV/RADIO MODE) A Skipping a programme number 1 Select a programme number to be skipped. BLUE Turn the skipped programme number to blue. 3 BLUE A that you will be unable to select it using the P + / - button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG. Release the skipped programme. Selecting favourite programme 1 FAV Select your favourite programme number.
WATCHING TV / PROGRAMME CONTROL IN TV MODE This function enables you to delete or skip the stored programmes. You can also move some channels to other programme numbers. A Auto Sort 1 GREEN Start Auto Sort. • After activating Auto Sort once, you can no longer edit programmes. WATCHING TV / PROGRAMME CONTROL Deleting a programme A 1 Select a programme number to be deleted.
BOOSTER (IN DIGITAL MODE ONLY) If reception is poor, selectBooster to On. When the signal is strong, select “Off”. Move OK Auto tuning Manual tuning Programme Edit Booster :: On Booster On Software Update : Off Diagnostics CI Information 1MENU SETUP Move Auto tuning Manual tuning Programme Edit Booster :: On Booster On Software Update : Off Diagnostics CI Information OK Off On On Select SETUP. 2 OK Select Booster. OK Select On or Off. WATCHING TV / PROGRAMME CONTROL SETUP 3 4 OK Save.
WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP Move SETUP OK WATCHING TV / PROGRAMME CONTROL Auto tuning Manual tuning Programme Edit Booster : On Software Software Update Update :: Off Off Diagnostics CI Information 1MENU Auto tuning Manual tuning Programme Edit Booster : On Software Software Update Update :: Off Off Diagnostics CI Information 3 Select SETUP. Select Software Update.
DIAGNOSTICS (IN DIGITAL MODE ONLY) This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX. SETUP Move Engineering Diagnostics OK : LG Electronics Inc. : 22LG300C : 708KGKG00019 : V1.18.1 D CH 30 CH 34 CH 36 CH 38 CH 54 CH 60 E BACK Prev. 1MENU EXIT Exit Select SETUP. 2 Select Diagnostics.
WATCHING TV / PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction.
SELECTING THE PROGRAMME TABLE You can check which programmes are stored in the memory by displaying the programme table. Displayed when the Locked Programme. Displaying programme LIST 1 LIST A have been set up to be skipped by auto programming or in the programme edit mode. • Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned. Selecting a programme in the programme list 1 TV/RADIO Select a programme. 2 OK A display the PROGRAMME LIST.
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in 8 Day Guide Mode RED GREEN Change EPG mode. Select the Broadcast Programme. Enter Date setting mode. PR P GUIDE OK EPG (ELECTRONIC PROGRAMME GUIDE) 48 Change to the selected programme. Select NOW or NEXT Programme. Page Up/Down. or TV/RADIO EXIT Switch off EPG. Select TV or RADIO Programme. INFO i The detail information on or off. Button Function in Date Change Mode GREEN Switch off Date setting mode.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9 and Zoom1/2. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using DE button. This function works in the following signal. PICTURE CONTROL 1 Press the RATIO button repeatedly to select the desired picture format.
PICTURE CONTROL • Original When your TV receives a wide screen signal it will automatically change to the picture format broadcast. • Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped. The picture adopting a compromise between alteration and screen coverage. Original PICTURE CONTROL • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode.
PRESET PICTURE SETTINGS Picture Mode-Preset PICTURE Move 100 100 50 70 70 0 R G E 1MENU Move Aspect Ratio : 16:9 Picture PictureMode Mode :: Vivid Vivid • Backlight • Contrast • Brightness • Sharpness • Colour • Tint 100 100 50 70 70 0 OK Vivid Vivid Standard Cinema Sport Game E PICTURE CONTROL Aspect Ratio : 16:9 Picture PictureMode Mode :: Vivid Vivid • Backlight • Contrast • Brightness • Sharpness • Colour • Tint PICTURE OK • Picture Mode adjusts the TV for the best pic- Select PICTURE
PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option PICTURE Move 100 70 50 50 50 0 R G Aspect Ratio : 16:9 Picture PictureMode Mode :: Vivid Standard (User) • Backlight • Contrast • Brightness • Sharpness • Colour • Tint E 1MENU Move 100 70 50 50 50 0 OK Vivid Standard Cinema Standard (User) Sport Game E PICTURE CONTROL Aspect Ratio : 16:9 Picture PictureMode Mode :: Vivid Standard (User) • Backlight • Contrast • Brightness • Sharpness • Colour • Tint PICTURE OK Select PICTURE.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast Optimizes the contrast automatically according to the brightness of the reflection. Fresh Colour Adjusts the colour of the reflection automatically to reproduce as close as possible natural colours. Noise Reduction Removes interference up to the point where it does not damage the original picture. Gamma High gamma values display whitish images and low gamma values display high contrast images.
ADVANCED - FILM MODE To set the TV up for the best picture quality for viewing films. This feature operates only in TV, AV and Component 480i/576i/1080i mode.
PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL When you view a film this function adjusts the TV to best picture quality. This function works in the following mode: AV (NTSC-M), HDMI or Component.
EYE CARE It helps you adjust brightness to prevent dazzling when the screen is too bright.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE OK D PICTURE CONTROL • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 • Advanced Control • Picture Reset 1MENU Move OK D R G • Backlight 100 • Contrast 100 • Brightness 50 •i Sharpness 70 Resetting video configuration... • Colour 70 R • Tint 0 • Advanced Control • Picture Reset G Select PICTURE. 2 OK Select Picture Reset.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Move Auto : Off AutoVolume Volume : Off Balance Sound Mode : Standard • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz 0 L R 0 0 0 0 0 - + - + - + - + - + E 1MENU AUDIO OK Move Auto : Off AutoVolume Volume : Off Balance Sound Mode : Standard • 120Hz • 200Hz • 500Hz • 1.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; SRS TruSurround XT or Clear Voice, Standard, Music, Cinema, Sport or Game and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. SRS TruSurround XT or Clear Voice, Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
SOUND SETTING ADJUSTMENT -USER MODE Adjusting the audio equalizer. AUDIO OK : Off 0 R - + - + - + - + - + E 1MENU Auto Volume Balance SoundMode Mode Sound : Off • 120Hz • 200Hz 0 : :Standard (User) Standard • 500Hz • 120Hz • 1.2KHz 0 • 200Hz 0 • 3KHz • 500Hz • 7.5KHz 0 • 1.2KHz 0 • 12KHz • 3KHz 0 E 00 0 0 0L 0 0 0 OK - + - + - + R + - + - + Close Select AUDIO. 2 OK 3 OK + - Select Sound Mode.
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Move SOUND & LANGUAGE CONTROL Auto Volume Balance Balance : Off Sound Mode : Standard • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz AUDIO OK 0 L R 0 0 0 0 0 - + - + - + - + - + E 1MENU Auto Volume Balance Balance Sound Mode Move OK : Off • Balance 0 0 : Standard • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz 0 0 0 0 0 F L Close - + - + - + - + E Select AUDIO.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move AUDIO OK Move D 1MENU OK D 0 0 0 0 0 0 0 - + - + - + - + - + - + - + + • 120Hz 0 + • 200Hz 0 + • 500Hz 0 • 1.2KHz 0 • 3KHz 0 + • 7.5KHz 0 i Resetting sound mode + • 12KHz 0 - configuration... Reset •• Reset Select AUDIO. 2 OK Select Reset. SOUND & LANGUAGE CONTROL • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz • 7.5KHz • 12KHz Reset •• Reset 3 OK Initialize the adjusted value.
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. SOUND & LANGUAGE CONTROL 64 Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice.
NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When NICAM mono is received, you can select N I C A M M O N O or F M M O N O. 2 When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 OK Select your desired language. OK Select your country. 2 * If you want to change Language/ Country selection SOUND & LANGUAGE CONTROL 1MENU Select OPTION. 2 OK Select Menu Language or Country. OK Select your desired language or country. 3 4 OK Save. • Press the MENU or EXIT button to return to normal TV viewing.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
TIME SETTING CLOCK SETUP When you enter ‘1105’ as password while the Clock Setup OSD is displayed, the OSD is enabled to set manually. If it is not manually set as shown above, the clock is set automatically when receiving a digital signal. This auto set-time function is not available anymore after you set time manually once. You have to do ‘Factory Reset’ if you want to use this function again.
AUTO ON/OFF TIMER SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work.
TIME SETTING AUTO SHUT-OFF SETTING If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes. TIME Move TIME OK Clock Off Time : Off On Time : Off Sleep Timer : Off Auto AutoSleep Sleep : Off Off Time Zone : Canary GMT 1MENU Move OK Clock Off Time : Off On Time : Off Sleep Timer : Off AutoSleep Sleep : Off Off Auto Off Off On Time Zone : Canary GMT Select TIME. TIME SETTING 2 OK Select Auto Sleep. OK Select Off or On.
SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. You can also adjust Sleep Timer in the TIME menu. 1 Press the S L E E P button repeatedly to select the number of minutes. The display ‘Sleep Timer : Off’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. LOCK Move LOCK OK OK Off : Off Off On LockSystem System : Off Lock Set Password Block Programme Parental Guidance : Off TIME SETTING 1MENU Move LockSystem System Lock Set Password Block Programme Parental Guidance : Off • If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’ Select LOCK. on the remote control handset. 2 OK Select Lock System. OK Select On.
BLOCK PROGRAMME Blocks any programmes that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System “On”. LOCK 1 Move YLE TV1 TV OK DTV Radio D Lock System : Off Set Password BlockProgramme Programme Block 1 YLE TV1 2 YLE TV2 4 TV4 Stockholm 5 YLE FST 6 CNN 8 YLE24 9 YLE Teema Parental Guidance : Off 14 TV4 Film 24 TV4 Fakta 50 TV400 24 TV4 Fakta 84 Kanal Lokal 24 TV4 Fakta 86 Info/3sat 87 Doku/Kika 88 TVE 1 E Pr.
PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. OPTION Move OK E 1MENU Select OPTION. 2 OK Select Key Lock. OK Select On or Off.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the i button to select the index menu. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
APPENDIX Initializing (Reset to original factory settings) This function operates in current mode. To initialize the adjusted value. When the Lock System menu is “On”, the message to enter the password appears.
APPENDIX TROUBLESHOOTING The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Install new batteries. A The remote control does not work Power is suddenly turned off Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted.
The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the TV Press the VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust Balance in menu option. A A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 22LG30** 26LG30** 22LG300C-ZA 26LG300C-ZA with stand 522.2 x 431.5 x 189.0 mm 20.6 x 17.0 x 7.5 inches 663.3 x 508.2 x 227.3 mm 26.1 x 20.1 x 9.0 inches without stand 522.2 x 384.2 x 69.0 mm 20.6 x 15.2 x 2.7 inches 663.3 x 449.8 x 80.0 mm 26.1 x 17.8 x 3.2 inches 5.6 kg / 12.4 lbs 5.34 kg / 11.8 lbs 10.1 kg / 22.3 lbs 8.6 kg / 19.
APPENDIX IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
Code (Hexa) 08 0B f0 43 AB 07 06 40 41 44 28 AA 02 03 00 01 1E 09 10 ~19 53 1A 72 71 63 61 20 39 5B E8 Function POWER INPUT TV/RADIO MENU GUIDE Left (F) Right (G) Up (D) Down (E) OK( ) BACK INFO i + P+ PFAV MUTE Number Key 0~9 LIST Q.
APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup AV IN 3 Connect the RS-232C (serial port) input jack to an external control device (such asRGB a computer or an IN A/V control system) to control the TV’s functions HDMI IN AUDIO RGB (RGB/DVI) (PC/DTV) externally. 2 Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C cables RS-232C IN are not supplied 1(DVI) connection S-VIDEO VIDEO (CONTROL & SERVICE) with the TV.
Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p . 91 OPTION Move OK OPTION D Subtitle Language Hard of Hearing( Country Input Label Key Lock Set SetID ID Power Indicator Factory Reset 1MENU Move OK D : English ) :UK : Off Subtitle Language Hard of Hearing( Country Input Label Key Lock Set SetID ID Power Indicator Factory Reset : English ) :UK : Off F 1 G Close Select OPTION. OK Select Set ID. OK adjust Set ID to choose the desired TV ID number.
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07. Brightness 08. Colour 09. Tint 10. Sharpness 11. OSD Select 12. Remote control lock mode 13. Balance 14.
01. Power (Command: k a) 04. Volume Mute (Command: k e) G To control Power On/Off of the TV. G To control volume mute on/off. Transmission You can also adjust mute using the MUTE button on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [k][e][ ][Set ID][ ][Data][Cr] G To show Power On/Off.
APPENDIX 09. Tint (Command: k j) 13. Balance (Command: k t) G To adjust the screen tint. G To adjust balance. You can also adjust tint in the PICTURE menu. Transmission You can also adjust balance in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Red : 00 ~ Green : 64 * Refer to ‘Real data mapping 1’. See page 91. Ack Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 112.
17. Equalize (Command : j v) 18. Tune Command (Command: m a) G To adjust equalize. G Select channel to following physical number. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] MSB Data : LSB 0 0 0 0 0 0 0 0 Frequency Step Frequency : 0 120Hz 1 200Hz 2 500Hz 3 1.2kHz 4 3kHz 5 7.5kHz 6 12kHz Step (Frequency data): Refer to ‘Real data mapping 3’. See page 91. Data 00 : High channel data Data 01 : Low channel data ex. No.
APPENDIX 20. Key (Command : m c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 85. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 22. Input select (Command: x b) (Main Picture Input) G To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 21. Control Back Light (Command: m g) G To Cont rol t he back light.
