ENGLISH OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Wall Mounting Bracket(Separate purchase) RW120 RW230 (19/22LH2***) (26/32LH2***) AW-47LG30M (32/37/42LH2***) HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Contents PREPARATION LCD TV MODELS : 19/22/26/32/37/42LH2***.A-1 Antenna Connection.............................................1 Connecting with a Component cable...................2 Connecting with an HDMI cable..........................3 Speaker output Setup..........................................3 Connecting with an HDMI to DVI cable...............4 Connecting with a Euro Scart cable....................5 Usb setup.............................................................
CONTENTS Sound & Language control CONTENTS Auto Volume Leveler..........................................96 Clear Voice II......................................................97 Preset Sound Settings-Sound Mode.................98 Sound Setting Adjustment -User Mode.............99 Infinite Sound...................................................100 Balance............................................................101 DTV Audio Setting (in digital mode only).........102 Selecting Digital Audio out.........
PREPARATION LCD TV MODELS : 19/22/26/32/37/42LH2*** Accessories AV MO DE This item is not included for all models. PO W ER ENE RG Y SAV ING * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. LI ST M UTE Q.VI EW or ME NU Q.M EN U RETU RN IN FO i GUI DE / EX IT MAR FA K V Polishing Cloth Polishing cloth for Do not use excessive force. This may cause scratching use on the or discolouration. screen.
preparation Front panel controls NOTE preparation ►TV ► can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. ►The ► energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. ■■ Image shown may differ from your TV.
Back Panel Information 19/22LH2*** ■■ Image shown may differ from your TV. 2 3 4 preparation 12 1 5 13 H/P 6 1 2 7 8 9 10 Power Cord Socket This TV operates on an AC power. The voltUSB IN age is indicated on the Specifications page. (► p.126) Never attempt to operate the TV on DC power. USB Input / DVI IN Connect USB storage device to HDMI this jack. 3 RGB/DVI Audio Input Connect the audio from a PC or DTV.
preparation 26/32/37/42LH2*** ■■ Image shown may differ from your TV. preparation 11 1 12 2 3 4 5 (RGB) VOLUME CONTROL 2 /DVI IN STEREO (8 ) 1 SPEAKER OUT 6 7 13 ANTENNA IN 8 H/P 9 10 7 RGB IN Input Connect the output from a PC. 8 HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. Component Input Connect a component video/audio device to these jacks.
Stand installation ■■ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Only 26/32/37/42LH2*** 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
preparation Back Cover for Wire Arrangement ■■ Image shown may differ from your TV. 19/22LH2*** preparation 1 2 26/32/37/42LH2*** Connect the cables as necessary. To connect additional equipment, see the External equipment setup section. 1 2 Install the Cable Management clip as shown. Connect the cables as necessary. To connect additional equipment, see the External equipment setup section. pen the Cable Management clip as O shown.
Not using the desk-type stand ■■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. 26/32/37/42LH2*** 19/22LH2*** 2 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Insert the Protection cover into the TV until clicking sound. preparation 1 protection cover Loose the bolts from TV. How to use Dual Lock™ (This feature is not available for all models.
preparation Attaching the TV to a desk (Only 26/32/37/42LH2***) preparation ■■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. 4-Screws (not provided as parts of the product) ► Screw: M5 x L (*L: Table depth + 8~10 mm) ex) Table depth: 15mm, Screw: M5 x 25 Swivel Stand (This feature is not available for all models.) ■■ Image shown may differ from your TV.
Kensington Security System ■■ This feature is not available for all models. ■■ Image shown may differ from your TV. NOTE ►►The Kensington Security System is an optional accessory. ►►If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. ►►Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.
preparation ■■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■■ The TV is designed to be mounted horizontally. Earthing preparation Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Remote Control Key Functions(Depending on model) When using the remote control, aim it at the remote control sensor on the TV. Image shown may differ from your TV. (POWER) Switches the TV on from standby or off to standby. AV MODE It helps you select and set images and sounds when connecting AV devices.(► p.42) INPUT External input mode rotate in regular sequence.(► p36) TV/RAD Selects Radio, TV and DTV channel. preparation ENERGY Adjust the Energy Saving mode of the TV.(► p.
preparation VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. preparation MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. (► p.84) MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE UP/ Move from one full set of screen information to the DOWN next one.
Remote Control Key Functions(Depending on model) When using the remote control, aim it at the remote control sensor on the TV. Image shown may differ from your TV. TV/RAD Selects Radio, TV and DTV channel. (POWER) Switches the TV on from standby or off to standby. POWER AV MODE ENERGY SAVING INPUT External input mode rotate in regular sequence. (►p.36) ENERGY Adjust the Energy Saving mode of the TV. (►p.
preparation VOLUME UP Adjusts the volume. /DOWN MUTE Switches the sound on or off. preparation POWER AV MODE ENERGY SAVING Programme Selects a programme. UP/DOWN PAGE UP/ Move from one full set of screen information to the DOWN next one. SIMPLINK / Controls SIMPLINK or MY MEDIA menu(Photo List, MY MEDIA Menu Music List, Movie List). control buttons LIST Q.VIEW Q. MENU Select the desired quick menu source.
External equipment setup ■■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. Antenna Connection ■■ For optimum picture quality, adjust antenna direction. ■■ An antenna cable and converter are not supplied.
external equipment setup ■■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32LH2*** models. ■■ Image shown may differ from your TV. Connecting with a Component cable This TV can receive Digital RF/Cable signals without an external digital set-top box.
Connecting with an HDMI cable 1 Connect the HDMI output of the external equipment (digital settop box, DVD, etc.) to HDMI/DVI IN 1, HDMI 2 (Except for 19/22LH2***) jack on the TV. 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) 2 /DVI IN 1 NOTE external equipment setup Select HDMI1, HDMI2 (Except for 19/22LH2***) input source using the INPUT button on the remote control.
external equipment setup Connecting with an HDMI to DVI cable external equipment setup 4 1 Connect the digital set-top box or the DVI output of the PC to HDMI/DVI IN 1 jack on the TV. 2 Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 3 4 Turn on the digital set-top box or the PC and the TV. (Refer to the digital set-top box or the PC manual for operating instructions.
Connecting with a Euro Scart cable 1 Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the AV Euro scart socket on the TV. 2 Turn on the external equipment. (Refer to the external equipment's manual for /DVI D IN operating instructions.
external equipment setup Usb setup 1 Connect the USB device to the USB IN jack on the TV. or 1 2 After connecting the USB IN jack, you use the USB function. (► p44) external equipment setup Connecting with a RF Cable To avoid picture noise (interference), allow adequate distance between the VCR and TV. 1 Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV. 2 onnect the antenna cable to the ANT IN C socket of the VCR.
Connecting with a D-sub 15 pin cable This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. 2 Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 3 Turn on the PC and the TV 4 Select RGB input source using the INPUT button on the remote control.
USB IN external equipment setup Insertion of CI Module VIDEO L/MONO AUDIO R external equipment setup 8 Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. USB IN 1 H/P HDMI IN 2 To view the encrypted (pay) services in digital TV mode. This feature is not available in all countries. For further information, see p.32. AV IN 2 NOTE (RGB) Check this point as shown and insert the CI Module.
Digital audio out Setup Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2 Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
external equipment setup Supported Display Resolution RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode external equipment setup Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.78 59.87 44.96/45 59.94/60 1360x768 47.72 59.8 33.72/33.75 59.94/60 1280x720 (RGB-PC) 45 60 28.125 50 26.97/27 23.97/24 33.716/33.75 29.976/30.00 56.25 50 67.43/67.5 59.
Screen Setup for PC mode Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. Move • Sharpness 70 • Colour 60 SCREEN OK Prev. Resolution • Tint 0 R G • Colour Temp. 0 W C • Advanced Control Auto Config. Position Size • Picture Reset ► Screen •• Screen Move To Set Yes No Phase Reset 1 2 3 4 5 external equipment setup PICTURE Select PICTURE. Select Screen. Select Reset. Select Yes. Run Reset.
external equipment setup Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. PICTURE Move • Sharpness 70 • Colour 60 SCREEN OK Prev. Move Resolution • Tint 0 R G • Colour Temp. 0 W C • Advanced Control Position Size • Picture Reset Screen •• Screen Auto Config. Auto Config.
Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] Move • Sharpness 70 • Colour 60 SCREEN OK Resolution • Tint 0 R G • Colour Temp. 0 W C • Advanced Control Auto Config. Position Move Prev. 1024 x 768 1280 x 768 1360 x 768 Size ► • Picture Reset Screen •• Screen Phase Reset 1 2 3 4 external equipment setup PICTURE Select PICTURE. Select Screen. Select Resolution.
external equipment setup Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually. This function works in the following mode : RGB[PC]. external equipment setup PICTURE Move • Sharpness 70 • Colour 60 SCREEN OK Prev. Resolution Auto Config. • Tint 0 R G • Colour Temp.
Watching TV / Programme control Turning on the TV When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the / I, INPUT or P ▲▼ button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
Watching TV / Programme control Quick Menu Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Watching TV / Programme control Aspect Ratio: Selects your desired picture format. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu.
On Screen Menus Selection and adjustment Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Watching TV / Programme control Auto programme tuning Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may differ slightly depending on broadcasting signals.
• Use NUMBER buttons to input a 4-digit password in Lock System ‘On’. • If you wish to keep on auto tuning select Start using the button. Then, press the OK button. Otherwise select Close. • When select Italy in the County menu, If the pop up is displayed when the conflicted programme after Auto Tuning, select a broadcaster for Conflicting programme number to solve.
Watching TV / Programme control Manual programme Tuning (In Digital Mode) Manual Tuning lets you manually add a programme to your programme list. If you want to select the DTV, SETUP Move ● Auto ● Programme ► ● Manual Tuning ● CI SETUP OK Tuning ► Watching TV / Programme control ● Auto Edit ◄ ● Manual Tuning ● Programme Information Move Tuning ● CI Edit OK ► DTV UHF CH.
•U se NUMBER buttons to input a 4-digit password in Lock System ‘On’. • You can select SBAND when the country is set to "Norway, Latvia.
Watching TV / Programme control If you want to select the Cable DTV, SETUP Tuning ● Auto ● Programme ► ● Manual Tuning ● CI SETUP OK ► Watching TV / Programme control ● Auto Move Edit Information Move ◄ OK Cable DTV Frequency(kHz) Tuning ● Manual Tuning Symbol rate(kS/s) ● Programme Modulation ● CI Edit Information ► 362000 6875 64QAM ● Signal Strength ● Signal Quality 50% 50% Add Close 1 2 3 4 Select SETUP. Select Manual Tuning. Select Cable DTV.
• Use NUMBER buttons to input a 4-digit password in Lock System ‘On’. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
Watching TV / Programme control Manual programme Tuning (In Analogue Mode) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
• Use NUMBER buttons to input a 4-digit password in Lock System ‘On’. • L : SECAM L/L’ (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa) I : PAL I (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) • To store another channel, repeat steps 4 to 9.
Watching TV / Programme control SETUP Tuning ● Auto ● Programme Move Edit ● Programme Information ● CI OK Tuning ◄ ● Manual Tuning ► ● Manual Tuning ● CI SETUP OK ► ● Auto Move Edit Information ► TV ◄ ● Storage 3 ● Storage ● System BG ● System ● Band V/UHF ● Channel or 0 Cable TV ► 3 BG ● Band V/UHF ● Channel 0 ● Fine ◄► ● Fine ◄► ● Search ◄► ● Search ◄► ● Name C 02 ● Name C 02 Store Store Close Close Watching TV / Programme control ■■Assigning a sta
SETUP ● Auto Move Tuning ● Auto ► ● Programme Move Edit ● Programme Information ● CI OK Tuning ◄ ● Manual Tuning ► ● Manual Tuning ● CI SETUP OK Edit Information ► TV ◄ ● Storage 3 ● Storage ● System BG ● System ● Band V/UHF ● Channel 0 or Cable TV ► 3 BG ● Band V/UHF ● Channel 0 ● Fine ◄► ● Fine ◄► ● Search ◄► ● Search ◄► ● Name C 02 ● Name C 02 Store Store Close Close Normally fine tuning is only necessary if reception is poor. 1 2 3 Select SETUP.
Watching TV / Programme control Programme Edit When a programme number is skipped, it means that you will be unable to select it using P during TV viewing. button If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes.
■■Skipping a programme number 1 Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 BLUE Release. • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
Watching TV / Programme control This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers. ■■Locking a programme number 1 Select a programme number to be locked. • It can be registered as Lock programme even when Lock System is turned Off. 2 YELLOW Turn the programme number to yellow. 3 Watching TV / Programme control 30 YELLOW Release. ■■Deleting a programme 1 2 RED Select a programme number to be deleted.
■■Moving a programme 1 2 GREEN Select a programme number to be moved. Turn the programme number to green. 3 GREEN Release.
Watching TV / Programme control CI [Common Interface] Information This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction.
Selecting the Programme List You can check which programmes are stored in the memory by displaying the programme list. Mini Glossary Exit 1 BBC ► Displayed when the Locked Programme. Programme List 2 BBC 3 BBC 4 BBC 5 BBC A ■■Displaying programme LIST 1 Display the Programme List. •Y ou may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode.
Watching TV / Programme control ■■Selecting a programme in the programme list 1 2 Switch to the chosen programme number. Watching TV / Programme control ■■Paging through a programme list 1 2 Turn the pages. Return to normal TV viewing. ■■Displaying the programme list Favourite List 1 1 BBC 2 BBC 3 BBC Exit 34 The mode will be switched between TV, DTV, and Radio from the program you are currently watching. Select a programme. Display the Favourite Programme List.
Input List HDMI and AV(SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. ■■ Image shown may differ from your TV. Input List USB AV Component RGB OK HDMI1 HDMI2 Input Label 1 Select the input source. Exit •A ntenna or Cable : Select it when watching the DTV/RADIO/TV.
Watching TV / Programme control Input Label Selects a label for each input source. ■■ Image shown may differ from your TV. Input Label Input List Antenna Move USB AV Component RGB OK Watching TV / Programme control ◄ ► Component ◄ ► RGB ◄ ► HDMI1 ◄ ► HDMI2 ◄ ► HDMI1 HDMI2 Input Label AV Exit ▼ Close 1 2 3 BLUE Select Input Label. Select the source. Select the label. • Press the MENU button to return to normal TV viewing.
Data Service (This menu is enabled only in Ireland. ) This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
Watching TV / Programme control SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want SIMPLINK menu,select “Off”.
Connecting to Home Theater with the SIMPLINK logo. 1 Connect the HDMI/DVI IN 1, HDMI 2 (Except for 19/22LH2***) terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables. Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables. 3 Select Home Theater in the Speaker menu by pushing the SIMPLINK button.
Watching TV / Programme control Simplink Functions Watching TV / Programme control 40 Disc playback Control connected AV devices by pressing the , OK, ►, ▀, l l, ◄◄ and ►► buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off.
SimpLink Menu Press the 1 2 3 5 TV viewing : Switch to the previous TV programme regardless of the current mode. DISC playback : Select and play connected discs. When multiple discs are available, the device type of discs are conveniently displayed at the bottom of the screen. VCR playback : Play and control the connected VCR. HDD Recordings playback : Play and control recordings stored in HDD.
Watching TV / Programme control AV Mode You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game Watching TV / Programme control 1 AV MODE Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. Off Cinema Game Sport Press the AV MODE button repeatedly to select the desired source.
Initializing(Reset to original factory settings) This function initializes all settings. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. When the Lock System menu is "On", the message to enter the password appears.
To use a USB device When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu or EPG is activated. When the Pop Up menu appears, you can select Music List, Photo List, Movie List or Extra Contents in the MY MEDIA menu. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the USB IN jack on the TV.
Precautions when using the USB device To use a USB device ►►Only a USB storage device is recognizable. ►►If the USB storage device is connected through a USB hub, the device is not recognizable. ►►A USB storage device using an automatic recognition programme may not be recognized. ►►A USB storage device which uses its own driver may not be recognized. ►►The recognition speed of a USB storage device may depend on each device.
To use a USB device Movie list You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.
File Video Decoder Audio Codec mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM dat MPEG1 Extension name ts,trp,tp MPEG2, H.264, AVS, VC1 Max Resolution MP2 MP2,MP3,Dolby Digital, AAC,HE-AAC vob MPEG1, 2 MP2,MP3,Dolby Digital,LPCM mp4, mov MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 AAC,HE-AAC,MP3 mkv H.264, MPEG-1,2,4 divx, avi MPEG2, MPEG4,DivX 3.11, DivX 4. DivX 5, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.
To use a USB device Screen Components You can also adjust USB in the INPUT menu. 1 Select MY MEDIA. 2 Select Movie List.
Movie Selection ■■When playing movie files Page 1/1 Movie List Drive1 Page 1/1 001 002 003 005 006 051. Apple_ ...... 02:30:25 Move To Photo List 1 Play P Page Change movie page. Mark Exit Mark Mode • Use the P MARK button to navigation in the Select the desired movie title. Movie files are played. To use a USB device Select the target folder or drive. 2 3 Change Numbers 004 Using the remote control GREEN Repeatedly, press the GREEN button to converted to Photo List->Music List.
To use a USB device ■■When selected movie files are played Page 1/1 Movie List Mark Mode Drive1 Page 1/1 001 002 003 005 006 051. Apple_ ...... 02:30:25 004 Move Play Marked 1 Page Change Exit Mark Mode MARK Mark Exit • When one or more movie files are marked, the marked movies will be played in sequence. To use a USB device Select the desired movie title. BLUE or 4 5 Unmark All P Select the target folder or drive. 2 3 Mark All Mark Convert to Mark Mode.
Using the remote control RED Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically. GREEN Mark all movie files on the screen. YELLOW Deselect all marked movie files. BLUE Exit the Mark Mode. EXIT Return to normal TV viewing. ►►If you select “Yes” from OSD when playing the same file after the movie file has been stopped, it will restart where it stopped previously.
To use a USB device Using the Movie List function, play Choose options. Set Video Play. Set Video. Set Audio. ■ To use a USB device 1 2 Close ◄► ► ► II or 01:02:30 / 02:30:25 ◄◄ ►► Q.MENU Option Hide Exit Show the Option menu. Select Set Video Play., Set Video. or Set Audio.. NOTE ►►Option values changed in Movie List does not affect Photo List and Music List. ►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
Using the remote control ■ ► II ◄◄ / ►► Stop the playing movie file. Press the PLAY(►) button to return to normal playback. During playback, press the Pause(II) button. ■■ Still screen is displayed. ■■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state. ■■ Press the Pause(II) button and then use the FF(►►) button for slow motion.
To use a USB device ■■When you select the Set Video Play, Set Video Play. Picture Size ◄ Full ► Audio Language ◄ 1 ► Subtitle Language ◄ On ► ● Language ◄ English ► ● Code page ◄ Default ► ● Sync ◄ 0 ► ● Position ◄ 0 ► ● Size ◄ Normal ► Repeat ◄ On ► Previous 1 To use a USB device Select Picture Size, Audio Language, Subtitle Langugae or Repeat. ►Picture ► Size : Selects your desired picture 2 format during movie play. Make appropriate adjustments.
■■When you select the Set Video, Set Video. Picture Mode ◄ ◄ ● Contrast 100 ◄ ● Brightness 50 ◄ ► ● Colour 60 ◄ ► ► ● Dynamic Contrast ◄ Medium ► ● Edge Enhancer ◄ Low ► ● Noise Reduction ◄ Off ► Previous Select Picture Mode. Make appropriate adjustments. (Refer to p.
To use a USB device ■■When you select the Set Audio, Set Audio. Sound Mode ◄ Standard ► Auto Volume ◄ Off ► Clear Voice II ◄ Off ► Balance 0 ◄ L R ► Previous To use a USB device 56 1 2 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
Photo list You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440 • You can play JPEG files only. • Non-supported files are displayed in the form of predefined icon.
To use a USB device Photo Selection ■■When playing photo files Page 1/1 Photo List Drive1 001 010 002 011 Page 1/1 003 004 005 006 012 013 014 015 Move To Music List To use a USB device 1 Select the target folder or drive. 2 3 Change Numbers 008 007 View P Page Change Mark Mode • Use the P photo page. 009 MARK Mark Exit button to navigation in the Select the desired photos. Photo files are displayed.
■■When selected photo files are displayed Page 1/1 Photo List Mark Mode 001 002 010 011 Drive1 Page 1/1 003 004 005 006 012 013 014 015 Move View Marked Page Change Exit Mark Mode MARK Mark Exit • When one or more photos are marked, you Select the desired photos. BLUE or 4 5 P Select the target folder or drive. 2 3 Unmark All Mark 009 Convert to Mark Mode. can view each marked photo or a slide show of the marked photos.
To use a USB device Using the remote control RED To use a USB device 60 Display the selected photo file. GREEN Mark all photo files on the screen. YELLOW Deselect all marked photo files. BLUE Exit the Mark Mode. EXIT Return to normal TV viewing.
How to view photo Detailed operations are available on full-sized photo view screen. Page 1/1 Photo List Drive1 001 002 010 011 Page 1/1 003 004 005 006 012 013 014 015 Move To Music List 008 007 View P Page Change Mark Mode Change Numbers 009 MARK Mark Exit ◄ ► The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. ◄ Slideshow 1 2 3 ► BGM ■ 2/13 ► Q.MENU Option Select the target folder or drive.
To use a USB device 01_a.jpg 2008/12/10 1920 x 1080 479 KB Select the Slideshow, 4 ◄ BGM, � (Rotate), (ZOOM IN), , Option, Hide or Exit. ► • Use ◄ Slideshow ► BGM ■ 2/13 ► Q.MENU Option Hide Exit ►►Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. ■ Set the time interval of the slide show in Option.
Using the Photo List function 01_a.jpg 2008/12/10 1920 x 1080 479 KB Choose options. ◄ ► Set Photo View. Set Video. Set Audio. Close ◄ Slideshow 1 or BGM ■ 2/13 ► Q.MENU Option Hide Exit Show the Option menu. Select Set Photo View., Set Video. or Set Audio.. NOTE ►►Option values changed in Movie List does not affect Photo List and Music List. ►►Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
To use a USB device ■■When you select the Set Photo View, Set Photo View. Slide Speed ◄ Fast ● Repeat ◄ On ► ● Random ◄ Off ► BGM ► ... Previous 1 2 To use a USB device 64 Select Slide Speed or BGM. Make appropriate adjustments.
■■When you select the Set Video, Set Video. Picture Mode ◄ ◄ ● Contrast 100 ◄ ● Brightness 50 ◄ ► ● Colour 60 ◄ ► ► ● Dynamic Contrast ◄ Medium ► ● Edge Enhancer ◄ Low ► ● Noise Reduction ◄ Off ► Previous Select Picture Mode. Make appropriate adjustments. (Refer to p.
To use a USB device ■■When you select the Set Audio, Set Audio. Sound Mode ◄ Standard ► Auto Volume ◄ Off ► Clear Voice II ◄ Off ► Balance 0 ◄ L R ► Previous To use a USB device 66 1 2 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
Music list You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 to 320 • Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz • Sampling rate MPEG2 Layer3 : 16 kHz, 22.
To use a USB device Music Selection Page 1/1 Music List Drive1 001. - B01.mp3 00:00 Page 1/1 002. - B02.mp3 00:00 003. - B03.mp3 00:00 004. - B04.mp3 00:00 005. - B05.mp3 00:00 Move To Movie List Change Numbers ■■When playing music files 1 To use a USB device 68 P Page Change Mark Mode MARK Mark Exit • Use the P button to navigate up/down in the music page. Select the target folder or drive. 2 3 Play Select the desired music title. Music files are played.
■■When selected music files are played Page 1/1 Music List Mark Mode Drive1 001. - B01.mp3 00:00 Page 1/1 002. - B02.mp3 00:00 003. - B03.mp3 00:00 004. - B04.mp3 00:00 005. - B05.mp3 00:00 Move Play Marked Select the target folder or drive. 2 3 Select the desired music title. BLUE or 4 5 Convert to Mark Mode. Mark desired music file.
To use a USB device Using the remote control RED To use a USB device 70 Display the selected music file. GREEN Mark all music files on the screen. YELLOW Deselect all marked music files. BLUE Exit the Mark Mode. EXIT Return to normal TV viewing.
Using the Music List function, play Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 Set Audio Play. ► 004. - B04.mp3 00:00 005. - B05.mp3 00:00 ► 005. - B05.mp3 ■ 1 II ◄◄ ►► or Set Audio. 006. - B06.mp3 00:00 ◄► Play with Photo 007. - B07.mp3 00:00 008. - B08.mp3 00:00 Close 02:30 / 03:25 Q.MENU Option Hide Exit Show the Option menu. Select Set Audio Play. or Set Audio. NOTE ►►Option values changed in Movie List does not affect Photo List and Music List.
To use a USB device Using the remote control ■ ► II ◄◄ / ►► GREEN To use a USB device 72 Stop the playing music file. Press the PLAY(►) button to return to normal playback. When you press the Pause(II) button while playing the file, the playback will be paused. When you press the Pause(II) button again while the playback is paused, it will resume the playback. When playing, When you press the REW(◄◄) button, the previous music file will be played.
■■When you select the Set Audio Play, Set Audio Play. Repeat ◄ On ► Random ◄ Off ► Previous 1 2 Select Repeat or Random. Make appropriate adjustments.
To use a USB device ■■When you select the Set Audio, Set Audio. Sound Mode ◄ Standard ► Auto Volume ◄ Off ► Clear Voice II ◄ Off ► Balance 0 ◄ L R ► Previous 1 To use a USB device 74 2 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
■■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. 002. B02.mp3 ► 00:31 / 04:04 NOTE To use a USB device ►►A damaged or corrupted music does not play but displays 00:00 in playtime.
To use a USB device DivX Registration Code Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) MY MEDIA DivX Reg.
Deactivation The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
EPG(Electronic programme guide) (in digital mode) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Switch on/off EPG 1 Switch on or off EPG. Select a programme 1 or Select desired programme.
EPG (Electronic programme guide) Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. RED Change EPG mode. Programme Guide ▲ That ’70s show 25 Nov. 2008 10:05 DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15 When ‘Now’ is selected, it is moved to selected program and EPG disappears When ‘Next’ is selected, a reservation pop-up window appears. Select NOW or NEXT Programme. ALL NOW 1 YLE TV1 2 YLE TV2 4 TV..
Button Function in 8 Day Guide Mode Change EPG mode. Programme Guide ▲ That ’70s show 25 Nov. 2008 10:05 DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15 ◄ GREEN Enter Date setting mode. ALL 14:00 15:00 ▼ Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ...
EPG (Electronic programme guide) Button Function in Date Change Mode or Switch off Date setting mode. Change to the selected date. Programme Guide ▲ That ’70s show 25 Nov. 2008 10:05 DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15 ◄ ALL 14:00 Select a date. or Switch off EPG. 2 YLE TV2 4 TV.. 5 YLE FST 6 CNN 8 YLE24 15:00 ▼ 1 YLE TV1 ... Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ...
Button Function in Extended Description Box The detail information on or off. DTV 1 YLE TV1 25 25 Nov. 2008 10:05 Fia World Touring Car Chanpionship Tue. 25 Nov. 2008 10:05 12:40 Text Up/Down. or Switch off EPG.
Picture Control Picture Size (Aspect Ratio) Control You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1 2 Select Aspect Ratio. PICTURE menu.
• 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
picture control Energy Saving It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished. Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start. • If you adjust “Energy Saving-Maximum”, Backlight feature will not work. • You can also adjust this feature by selecting Energy Saving button on the remote control.
picture control Preset Picture Settings Picture Mode-Preset Strengthen the contrast, brightness, colour and sharpness for vivid picture. The most general screen display status. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games.
Manual Picture Adjustment Picture Mode-User option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture.
picture control Picture Improvement Technology You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode. Image shown may differ from your TV.
Expert Picture Control By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. Image shown may differ from your TV.
picture control *This feature is not available for all models. Dynamic Contrast (Off/Low/Medium/High) Dynamic Colour (Off/Low/High ) ■■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
Colour Gamut (Advanced Control: Wide/Standard) • Standard : Mode to use original colour area regardless of the display char- Colour Temperature (Medium/Warm/Cool) Colour Management System This is the function to adjust the overall colour of the screen to the feeling you want. a. • Method : 2 Points • Pattern: Inner, Outer • Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 to +50. b.
picture control Picture Reset Settings of the selected picture modes return to the default factory settings. PICTURE Move • Sharpness 70 • Colour 60 PICTURE OK • Tint 0 R G • Colour Temp. 0 W C picture control 1 2 3 4 • Colour 60 OK ► • Advanced Control •• Picture Picture Reset Reset ► • Screen 70 • Tint ? All picture 0 Rsetting willGbe reset. C • Colour Temp. Continue?W • Advanced Control •• Picture Picture Reset Reset Move • Sharpness Yes No • Screen Select PICTURE.
Power Indicator Adjust the power/standby indicator light on the front of the TV. Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to On or Off when the power turns on.
Sound & Language control Auto Volume Leveler Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme.
Clear Voice II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Volume : Off Off :: Off ● Balance ● Sound Mode ● Auto 33 ► Clear Voice Voice IIII ●●Clear AUDIO OK ► ● Auto Move 0 L R 50 • Bass 50 3 Mode ● Clear Voice II L 0 ● Level R 33 ◄ 3 - Off ► + : Standard • Treble 50 • Bass 50 Close Select AUDIO. • If you select “On” for Clear Voice II, Infinite Sound feature will not work.
sound & language control Preset Sound Settings-Sound Mode You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound.
Sound Setting Adjustment -User Mode AUDIO Move Volume ● Clear Voice II : Off ● Auto 3 L ► Standard(User) :: Standard R 3 4 Sound Mode Mode ●●Sound OK 3 L R Standard(User) 0 Standard Standard(User) :: Standard Music • Treble 50 • Infinite Sound : OffCinema • Treble 50 Sport • Bass 50 • Bass 50 Game • Reset Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport or Game. Select Treble or Bass. Set the desired sound level.
sound & language control Infinite Sound Select this option to sound realistic. 1 2 3 Select AUDIO. Select Infinite Sound. Infinite Sound : Infinite Sound is a patented LG proprietary sound processing technology that strives immersive 5.1 surround sound impression with front two loudspeakers. Select On or Off. • Press the MENU button to return to normal TV viewing. • Press the RETURN or BACK button to move to the previous menu screen.
Balance You can adjust the sound balance of the speakers to preferred levels. AUDIO Volume ● Clear Voice II : Off : Off Mode ● Auto 3 00 L R : Standard 3 : Off : Off ●● Balance Balance ● Sound Mode OK 3 0●0LBalance : Standard • Infinite Sound : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 R 0◄ L R ► Close • Reset Select AUDIO. Select Balance. Make desired adjustment.
sound & language control DTV Audio Setting (in digital mode only) When different audio types exist in an input signal, this function allows you to select the audio type you want.
Selecting Digital Audio out This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).
sound & language control Audio Reset Settings of the selected Sound Mode return to the default factory settings. AUDIO ● Sound Move Mode : Standard ● Sound 1 2 sound & language control 3 4 Mode OK : Standard • Infinite Sound : Off • Treble 50 • Treble? 50 settings will be resetted.
Audio Description (In digital mode only) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
sound & language control I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Select Audio or Audio Language. 2 Select the sound output. Broadcast MONO Stereo STEREO Dual sound & language control 106 On Screen Display Mono DUAL I, DUAL II, DUAL I+II ■■ Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono.
NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. 1 When NICAM mono is received, you can select NICAM MONO or FM MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM MONO.
sound & language control On-Screen Menu Language / Country Selection The installation guide menu appears on the TV screen when it is switched on for the first time. 1 Select your desired language. 2 Select your country. * If you want to change Language/ Country selection 1 Select OPTION. 2 Select Language(Language). 3 Select Menu Language. 4 sound & language control 108 5 Select your desired language. Save. 1 Select OPTION. 2 Select Country. 3 Select your country.
Language Selection The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
sound & language control Audio Language OSD Information < Audio Language Selection > ►►When two or more audio languages are broadcast, you can select the audio language. Display N.A Status Not Available MPEG Audio Dolby Digital Audio Audio for “Visual Impaired” 1 2 Audio for “Hearing Impaired” Select Audio or Audio Language. Dolby Digital Plus Audio HE-AAC HE-AAC Audio Select an audio language.
Time Setting Clock Setup The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock manually in Manual mode. You must set the time correctly before using on/off timer function. The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. When if the city name in Time Zone is changed into offset, you can change time by 1 hour.
time setting Auto on/off time setting The Off time function automatically switches the TV to standby at a preset time. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work. ■■ Image shown may differ from your TV.
Alarm Setting The alarm sound will go off when the designated time passes. When 60 seconds pass, the alarm sound will stop. If you do not want Alarm function, select “Off” ■■ Image shown may differ from your TV. TIME Move TIME OK ● Clock Move OK ● Clock 1 Mar.
Parental Control / Ratings Set Password & Lock System Enter the password, press ‘0’,‘0’,‘0’,‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’,‘0’,‘0’,‘0’ . If a channel is locked, enter the password to unlock it temporarily.
Block Programme Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ”On”. Enter a password to watch a blocked programme.
parental control / ratings Parental Control (In Digital Mode only) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
External Input Blocking Enables you to block an input. It is available to use this function in Lock System ”On”. ■■ Image shown may differ from your TV.
parental control / ratings Key Lock This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off. LOCK Move ● Lock System ● Set : Off ● Block ● Input ● Lock 2 3 parental control / ratings 118 System : Off ● Block Guidance: Blocking Off ● Input Select LOCK. Select Key Lock. Select On or Off.
Teletext This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
teletext TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■■ Block / group / page selection With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3 With the green button you can proceed to the next existing page with automatic overflow to the next group.
Special Teletext Functions ■■ Press the T. OPT button and then use button to select the Text Option menu. In UK(In digital mode), T. OPT button does not work. ■■Index Text Option Select the each index page. Index Time Hold ■■Time Reveal Update When viewing a TV programme, select this menu to display the time at the top right Close hand corner of the screen. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen.
Digital Teletext *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. Teletext within Digital Service 1 Press the numeric or P button to select a digital service which broadcasts digital teletext.
Appendix Troubleshooting The TV does not operate properly. The remote control does not work Power is suddenly turned off ■■ Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. ■■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■■ Install new batteries. ■■ Is the sleep timer set? ■■ Check the power control settings. Has the Power supply been interrupted.
appendix The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB ■■ Press the + or - button. ■■ Sound muted? Press MUTE button. ■■ Try another channel. The problem may be with the broadcast. ■■ Are the audio cables installed properly? ■■ Adjust Balance in menu option.
Maintenance Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
appendix Product Specifications 19LH2*** 22LH2*** 26LH2*** 19LH250C-ZB 19LH200H-ZB 22LH250C-ZB 22LH200H-ZB 26LH250C-ZB 26LH200H-ZB with stand 462.4 mm x 353.0 mm x 171.0 mm 533.4 mm x 397.0 mm x 171.0 mm 667.0 mm x 504.0 mm x 224.0 mm without stand 462.4 mm x 308.0 mm x 65.0 mm 533.4 mm x 351.7 mm x 65.0 mm 667.0 mm x 446.2 mm x 80.0 mm with stand without stand 3.8 kg 3.6 kg 4.8 kg 4.6 kg 8.9 kg 7.
IR Codes(Depending on model) *This feature is not available for all models. Code (Hexa) Function Note 95 Energy Saving R/C BUTTON 08 POWER R/C BUTTON(POWER ON/OFF) 0B INPUT R/C BUTTON 79 RATIO(Depending on model) R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.
appendix External Control Device Setup RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. Type of Connector; D-Sub 9-Pin Male No.
Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► p.133. OPTION ● Demo Mode Mode Move ● Country : UK ● Disability Assistance ● Disability Assistance ● Power ● Power Indicator Indicator ● Factory ► Reset ::11 OK : Off ● Language(Language) : UK ► 3 ● Demo ● Country ● Set ID 2 OPTION OK ● Language(Language) ● Factory 1 Move : Off ◄ Reset ● Set ID ::11 1 ► Close Select OPTION. Select Set ID.
appendix Communication Parameters ■■ Baud rate : 9600 bps (UART) ■■ Data length : 8 bits ■■ Parity : None ■■ Stop bit : 1 bit ■■ Communication code : ASCII code ■■ Use a crossed (reverse) cable. Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Command Reference List COMMAND COMMAND 1 2 01. Power appendix 130 k DATA (Hexadecimal) a 00 to 01 * [Command 1] : * [Command 2] : : * [Set ID] First command to control the TV.
01. Power (Command: k a) ►► To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off. Transmission ►► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK/NG][Data][x] [k][a][ ][Set ID][ ][FF][Cr] 05.
appendix 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission 13. Treble (Command: k r) ►► To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 133. Ack Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 133. [j][ ][Set ID][ ][OK/NG][Data][x] 10.
17. Energy Saving (Command: j q) 19.Tune Command (Command: m a) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Transmission ►► Select channel to following physical number. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No.
appendix 21. Key(Command: m c) ►► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 127. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 23. Input select (Command: x b) (Main Picture Input) ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 LSB 0 0 0 External Input External Input 22. Control Back Light (Command: m g) 0 0 Input Number Data 0 0 0 0 DTV 0 0 0 1 ►► To Control the back light.
Open source software notice The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/ LGPL2.1/MPL1.
appendix ■ pixman: • copyright © 1987, 1988, 1989, 1998 The Open Group • copyright © 1987, 1988, 1989 Digital Equipment Corporation • copyright © 1999, 2004, 2008 Keith Packard • copyright © 2000 SuSE, Inc. • copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. • copyright © 2004, 2005, 2007, 2008 Red Hat, Inc.
Open source license GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
appendix 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
appendix NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
appendix Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
appendix c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
appendix MOZILLA PUBLIC LICENSE Version 1.1 --------------1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.
appendix (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.
6.3. Derivative Works.
appendix 10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No.
