Owner's Manual IPS LED MONITOR (LED MONITOR) Please read the safety information carefully before using the product. IPS LED Monitor (LED Monitor) Model List 34UC97 www.lg.
Table of Contents ENGLISH TABLE OF CONTENTS 18 USER SETTINGS 18 Activating the Main Menu 18 - Main Menu Features PREPARING 19 User Settings 4 Product Composition 19 - Menu Settings 5 Product and Button Description 20 - Ratio 5 - How to Use the Joystick Button 21 - Function 6 - Input Connector 22 - PBP 7 Moving and Lifting the 23 - Picture 24 - Color 25 - Settings 26 - Reset 27 TROUBLESHOOTING 29 PRODUCT SPECIFICATION 30 Factory Support Mode 3 LICENSE 4 ASSEMBLIN
License 3 LICENSE The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Standards Association. MaxxAudio and additional MAXX trademarks are trademarks and/or registered trademarks of Waves Audio Ltd.
ASSEMBLING AND PREPARING ENGLISH ASSEMBLING AND PREPARING Product Composition Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here.
ASSEMBLING AND PREPARING 5 Product and Button Description ENGLISH Joystick Button / Power LED yy On Power on yy Off Power off How to Use the Joystick Button You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. Basic Functions ◄/► Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor.
ASSEMBLING AND PREPARING ENGLISH Input Connector ON DC switch DC-IN (19 V ) H/P HDMI IN 1 HDMI IN 2 DP IN USB UP USB IN 1 5V 1.1 A USB IN 2 5V 1.
ASSEMBLING AND PREPARING When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size. CAUTION yy Avoid touching the monitor screen as much as possible. -- This may result in damage to the screen or some of the pixels used to create images. yy Place the monitor in the original box or packing material before attempting to move it.
ASSEMBLING AND PREPARING ENGLISH Installing the Monitor 3 Stand Body Assembling the Stand 1 Stand Base 4 CAUTION yy To protect the screen, place the screen face down on the screen pad which is inside the box.
ASSEMBLING AND PREPARING 6 Input connector cover 9 Installing on a Table upright position. Place the monitor at least 10 cm away from the wall to ensure sufficient ventilation. 10 cm 10 cm 10 cm 10 cm CAUTION yy Illustrations in this document represent typical procedures, so they may look different from the actual product. yy Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
ASSEMBLING AND PREPARING Cautions When Connecting Power Cord Adjusting the Angle ENGLISH 1 Place the monitor mounted on the stand base 2 220 V in an upright position. Adjust the angle of the screen. The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing experience. 110 V yy Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
ASSEMBLING AND PREPARING 11 Using the Kensington Lock Connect the monitor to a table using the Kensington security system cable. NOTE yy The Kensington security system is optional. You can obtain optional accessories from most electronics stores. ENGLISH The connector for the Kensington security system is located at the bottom of the monitor. For more information on installation and usage, refer to the Kensington lock owner's manual or visit the website at http://www.kensington.com.
Using the Monitor ENGLISH USING THE MONITOR Press the joystick button, go to Menu → Easy control → Input, and then select the input option. CAUTION yy Do not press the screen for a prolonged time. This may cause image distortion. yy Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible. NOTE Connecting to a PC yy This monitor supports the *Plug and Play feature.
Using the Monitor 13 Thunderbolt ( ) Connection Transmits digital video and audio signals from your PC to the monitor. Connect the monitor to your PC using the display port cable as shown in the illustration below: You can connect your high-resolution display or high-performance data device to the monitor via a Thunderbolt port. Connect your external device to the monitor using the Thunderbolt cable as illustrated below.
ENGLISH 14 Using the Monitor Connecting AV Devices Connecting Peripherals HDMI Connection USB Cable connection - PC HDMI transmits digital video and audio signals from your AV device to the monitor. Connect your AV device to the monitor using the HDMI cable as shown in the illustration below. The USB port on the product functions as a USB hub. NOTE yy Make sure to install the most recent Windows OS service pack before using the product. yy Peripheral devices are sold separately.
Using the Monitor HDMI/DP (DisplayPort) connection USB UP USB UP USB IN 1 5V 5V 1.1 A Connect peripherals to the monitor via the headphones port. Connect as illustrated. H/P USB IN 2 1.1 A USB IN 1 Connecting Headphones 5V 1.1 A (sold separately) USB IN 2 5V 1.1 A (sold separately) (sold separately) NOTE HDMI IN 1 HDMI IN 2 yy Peripheral devices are sold separately. yy If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Installing the LG Monitor Software ENGLISH INSTALLING THE LG MONITOR SOFTWARE Insert the software CD included in the product packaging into your PC's CD drive and install the Screen Split. The installation screen images are for reference only. The actual installation screen images may vary depending on the model. 1 Set up Internet Explorer as the default web browser. 3 Follow the instructions to proceed with the installation.
Installing the LG Monitor Software 17 6 When the installation is complete, restart your system. ENGLISH NOTE yy Screen Split This program automatically splits the program window as desired. yy When you run Screen Split, the Screen Split icon [ ] appears in the system tray at the bottom right of the PC screen. yy Right-click the Screen Split icon and select the desired layout.
User Settings ENGLISH USER SETTINGS Activating the Main Menu 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options. 3 Press the joystick button once more to exit the main menu. Joystick Button Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the monitor.
User Settings 19 User Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Configure the options by moving the joystick up/down/left/right. 2 3 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. 4 If you want to exit the OSD menu, move the joystick to ◄ until you exit. yy When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen.
User Settings ENGLISH Ratio 1 Easy control To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Easy control > Ratio by moving the joystick. 2 3 Configure the options following the instructions that appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit.
User Settings Function To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Function by moving the joystick. Easy control > 2 3 Configure the options following the instructions that appear in Reader Mode Off > Picture Mode Custom > Low > Function SMART ENERGY SAVING the bottom right corner. PBP 4 To return to the upper menu or set other menu items, move 5 the joystick to ◄ or pressing ( / OK) it.
User Settings ENGLISH PBP 1 PBP PBP To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to PBP by movingthe joystick. 2 3 Configure the options following the instructions that appear in 4 5 Easy control Off > > Input Audio HDMI1 Function > Swap Sub Full the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
User Settings Picture 5 > High > Middle > Sharpness To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Screen > Picture by moving the joystick. 2 3 Configure the options following the instructions that appear in Easy control Black Level Response Time Function the bottom right corner. PBP 4 To return to the upper menu or set other menu items, move 5 the joystick to ◄ or pressing ( / OK) it.
User Settings ENGLISH Color Color Gamma 1 To view the OSD menu, press the joystick button at the Easy control bottom of the monitor and then enter the Menu. Go to Screen > Color by moving the joystick. 2 3 Configure the options following the instructions that appear in 4 5 Function the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit.
User Settings Settings Settings bottom of the monitor and then enter the Menu. Go to Settings by moving the joystick. 2 3 Configure the options following the instructions that appear in 5 the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Easy control > Power LED On > Automatic Standby Off > Disable > Off > Function DisplayPort 1.
User Settings ENGLISH Reset 1 Reset Do you want to reset your settings? To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Reset by moving the joystick. Easy control 2 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move 5 the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit.
Troubleshooting 27 Nothing is displayed on the screen. Is the monitor's power cord yy Check if the power cord is correctly plugged into the power outlet. plugged in? Is the power LED on? yy Check the power cable connection and press the power button. Is the power on and the power LED displaying white? Is the power LED blinking? Is the OUT OF RANGE message being displayed? Is the No Signal message being displayed? The screen may not be displayed properly when configuring DisplayPort 1.2 in a Mac product.
Troubleshooting ENGLISH NOTE yy Check if the video card's resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution in Control Panel > Display > Settings. yy Not setting the video card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
Product Specification LCD Screen Resolution Video Signal Input Connector Power Sources AC/DC Adapter Stand Angle Type Color Depth 87 cm TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 87 cm HDMI 8-bit color is supported. DP (DisplayPort) 10-bit color is supported. 8-bit color is supported. Thunderbolt ( ) Pixel Pitch 0.2325 mm x 0.
ENGLISH 30 Product Specification Factory Support Mode (Preset Mode, HDMI/DisplayPort/Thunderbolt PC) Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1152 x 864 54.347 60.05 +/+ 1280 x 720 45 60 +/+ 1280 x 1024 63.981 60.02 +/+ 1600 x 900 60 60 +/+ 1680 x 1050 65.29 59.954 -/+ 1920 x 1080 67.5 60 +/- 2560 x 1080 66.7 60 -/+ 3440 x 1440 43.82 29.
PROPER POSTURE 31 Proper Posture for Using the Monitor Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye level. yy Take a break for approximately 10 minutes every hour to reduce any fatigue caused by prolonged usage. yy The stand of the touch monitor allows the product to be used in the optimum position. yy Adjust the stand angle from -5° to 15° to obtain the best view of the screen. You should be looking slightly down at the screen.
This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions. Read the owner's manual (CD) carefully and keep it at hand. Please note that the label attached to the product provides information for technical support. Model Serial No. ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency (EPA). As an ENERGY STAR Partner LGE U. S. A., Inc.
