32LC2D 32LC2DB 37LC2D 37LC2DB 42LC2D 42LC2DB 42PC1D 50PC1D Please read Information Manual included together before reading this manual and operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ACCESSORIES Ensure that the following accessories are included with your set. If any accessory is missing, please contact the dealer from where you purchased the set.
CONTENTS ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SPECIAL FUNCTIONS INTRODUCTION CONTENTS Controls (Model Name: 32/37/42LC2D *) . . . . . . . . . . . . . 4 PIP/POP/Twin Picture Connection Options (Model Name: 32/37/42LC2D *) 5 Watching PIP/Double Window/POP . . . . . . . . . . . . . . . . . . . 30 Controls (Model Name: 42/50PC1D *) 6 Programme Selection for Sub Picture 7 Input Source Selection for Sub Picture ..................
TV MENU TIME Clock Setup On Screen Menus Selection and Adjustment ......... 38 Auto programme (In Digital Mode) ..................... Manual Programme Tuning (In Digital Mode) Programme Edit (In Digital Mode) .................. 5V Antenna Power (In Digital Mode only) Booster (In Digital Mode only) ......... 39 40 41-42 ............. 43 .......................... 44 Diagnostics (In Digital Mode only) ..................... Auto Programme Tuning (In Analogue Mode) ............
INTRODUCTION CONTROLS (MODEL NAME: 32/37/42LC2D *) This is the front panel of 32/37/42LC2D *. ■ ■ This is a simplified representation of front panel. Here shown may be somewhat different from your set. INTRODUCTION Front Panel Controls PR PROGRAMME Buttons VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button R POWER Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
CONNECTION OPTIONS ■ ■ Here shown may be somewhat different from your set. This manual explains the features available on the 32/37/42LC2D *.
INTRODUCTION CONTROLS (MODEL NAME: 42/50PC1D *) - This is a simplified representation of front panel. - Here shown may be somewhat different from your set. INTRODUCTION Front Panel Controls INPUT MENU OK PR VOL INPUT Button Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on.
CONNECTION OPTIONS - Here shown may be somewhat different from your set. - This manual explains the features available on the 42/50PC1D *. Back Connection Panel INTRODUCTION AV IN 4 AUDIO Input R AUDIO L/MONO MONO VIDEO Input VIDEO AC IN VARIABLE ARIABLE VARIABLE AUDIO OUT VIDEO AUDIO S-VIDEO COMPONENT IN (MONO) VIDEO AUDIO OUT AV IN 3 AV IN 3 COMPONENT IN AUDIO AV 1 AV 2 DTV OUT HDMI IN AV 1/2 - 42PC1DV models have a unit of HDMI input jack.
INTRODUCTION REMOTE CONTROL KEY FUNCTIONS POWER Switches the set between ON and STANDBY. D/A TV (Digital TV / Analogue TV) Selects digital or analogue mode. INTRODUCTION INPUT D/A TV POWER TV GUIDE DVD VCR ARC SUBTITLE PIP PR+ SWAP IP PR- P INFO PIP BACK i TEXT MENU PIP INP / UT SLEEP EXIT INPUT Selects the DTV, TV, AV, Component, RGB or HDMI/DVI modes. switches the set on from standby. TV, DVD, VCR Selects the remote operating mode: TV, VCR, DVD.
MENU Displays on screen menus one by one. Exits the current menu. Memorizes menu changes. INPUT D/A TV POWER GUIDE DVD VCR ARC SUBTITLE PIP PR+ SWAP - PIP PR INFO PIP BACK i TEXT MENU PIP INP / UT SLEEP EXIT EXIT Clears all on-screen displays and returns to TV viewing from any menu. INTRODUCTION TV TELETEXT BUTTONS These buttons are used for teletext. Text button is used to enable teletext services while other buttons are for teletext functions.
INTRODUCTION ARC GUIDE SUBTITLE PIP PR+ SWAP - PIP PR INFO PIP BACK i TEXT MENU PIP INP / UT SLEEP EXIT INTRODUCTION MUTE FAV PR 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW SIZE POSITION INDEX REVEAL i TIME What is Brief Info? : Brief Info shows the present screen information. : On Watching with the upper Input signal, press the INFO i button. How to use? 1. Press the INFO i button to show the Brief Info on the screen. 2. Press the INFO i button or EXIT button to exit.
INSTALLATION UNFOLDING THE BASE STAND ■ This feature is not available for all models (42PC1D *) 1 A 2 INSTALLATION 3 4 B C ■ Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1. Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward. ■ Pull the stand out as shown above in Figures 2 ~ 3. After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the stand.
INSTALLATION BASIC CONNECTION (Only 42/50PC1D *) ■ These models have two cable arrangement methods according to the stand type. Stand type 1 Arrange the cables as shown picture. INSTALLATION Stand type 2 1 Hold the C A B L E M A N A G E M E N T with both hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.
BASIC CONNECTION (Only 32/37/42LC2D * ) 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. 32LC2D * INSTALLATION 2 37/42LC2D * Install the C A B L E M A N A G E M E N T as shown. 32LC2D * 3 37/42LC2D * Bundle the cables using the supplied twister holder.
INSTALLATION ■ ■ The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING Power Supply INSTALLATION Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING - Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. - The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent the product from damage caused by fall.
AV IN 3 VARIABLE AUDIO ( S-VIDEO COMPONENT IN ) VIDEO AUDIO OUT CONNECTIONS & SETUP AUDIO AV 1 AV 2 DTV OUT - All cables shown are not included with the TV - This part of CONNECTION & SETUP mainly use picture for the 42PC1D *. AV IN 4 ANTENNA CONNECTION R AUDIO L/MONO - For optimum picture quality, adjust antenna direction if needed.
VCR SETUP - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. 1. When connecting with an antenna 1 Connect the RF out socket of the VCR to the Antenna socket on the set. (R) AUDIO (L) VIDEO 2 Connect the antenna cable to the RF antenna socket of the VCR.
CONNECTIONS & SETUP 3. When connecting with a Euro Scart Back panel of the set AV 1 AV 2 1 Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the set. 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select AV1 input source with using the INPUT button on the remote control. - If connected to AV2 Euro scart socket, select AV2 input source.
EXTERNAL AV SOURCE SETUP AV IN 4 1 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2 Select AV4 input source with using the INPUT button on the remote control. If connected to AV IN3 input, select AV3 input source. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
OPTICAL 2 1(DVI) VARIABLE S-VIDEO AUDIO ( COMPONENT IN ) VIDEO AUDIO DVD SETUP 1. When connecting with a S-Video cable DVD (R) AUDIO (L) VARIABLE VIDEO AUDIO S-VIDEO 1 Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select AV3 input source with using the INPUT button on the remote control.
3. When connecting with a component cable DVD B R 1 (R) AUDIO (L) Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set. HDMI IN DIGITAL AUDIO OUT RS-232C IN (CONTROL & SERVICE) OPTICAL VARIABLE VIDEO S-VIDEO AUDIO 2 COMPONENT IN (MONO) VIDEO AUDIO OUT AV IN 3 1 AUDIO Back panel of the set 2 2 Connect the audio outputs of the DVD to the 1(DVI) COMPONENT IN AUDIO jacks on the set. 3 Turn on the DVD player, insert a DVD.
RS-232C IN DIGITAL AUDIO (CONTROL & SERVICE) OUT HDMI IN RGB IN REMOTE CONTROL IN AUDIO (RGB/DVI) IN RGB (PC/DTV) OUT ANTENNA OUT OPTICAL ANTENNA IN 2 CONNECTIONS & SETUP 1(DVI) HDSTB SETUP - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. 1.
3. When connecting with a Component cable Digital Set-top Box B R 1 (R) AUDIO (L) Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN DIGITAL AUDIO VIDEO jacks HDMI IN on the set. OUT RS-232C IN (CONTROL & SERVICE) OPTICAL 2 VARIABLE VIDEO S-VIDEO AUDIO 2 3 COMPONENT IN (MONO) Turn on the digital set-top box. (Refer to the DIGITAL AUDIO owner’s manualOUTfor the digital set-top box.
CONNECTIONS & SETUP ! NOTE If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is necessary. G If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will be automatically set to 1280x720p. G If the digital set-top box does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.
IN RGB (PC/DTV) 1(DVI) OUT PC SETUP - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. 1. When connecting with a D-sub 15 pin cable RGB IN REMOTE CONTROL IN AUDIO (RGB/DVI) IN RGB (PC/DTV) OUT 1 Connect the RGB output of the PC to the RGB (PC/DTV) jack on the set. 2 Connect the PC audio outputs to the AUDIO (RGB/DVI) jack on the set. 3 Turn on the PC and the set.
CONNECTIONS & SETUP ! NOTE G To CONNECTIONS & SETUP enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC/DTV) or HDMI IN (or HDMI/DVI IN port of the set; change the resolution output of PC accordingly.
Supported Display Resolution (for 42PC1D * / 50PC1D *) RGB[PC] / HDMI[PC] mode Resolution 720x400 640x480 720x480 1280x768 800x600 1024x768 1152x864 1280x720 1280x960 1280x1024 1360x768 1366x768 31.469 31.469 35.000 37.861 37.500 43.269 31.47 47.78 35.156 37.879 48.077 46.875 53.674 49.725 48.363 56.476 60.023 68.677 54.348 63.995 67.500 44.77 60.023 63.981 47.72 47.56 70.08 59.94 66.66 72.80 75.00 85.00 59.94 59.87 56.25 60.31 72.18 75.00 85.06 74.55 60.00 70.06 75.02 85.00 60.05 70.01 75.00 59.
BASIC OPERATION TURNING ON THE SET - When using the remote control, aim it at its sensor on the set. INPUT D/A TV POWER 1 Connect power cord correctly, the set is switched to standby mode. DVD TV ARC GUIDE - Press the r / I, INPUT or PR D or E button on the set or press the POWER, INPUT, D/A TV, PR D or E or NUMBER buttons on the remote control and then the set will switch on.
PROGRAMME SELECTION Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. VOL 1 Press the P R D or programme number. E MUTE PR FAV 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW or NUMBER buttons to select a SIZE POSITION INDEX REVEAL i ? FAV PR TIME I/II Adjust the volume to suit your personal preference. VOL 1 MUTE Press the VOL D or E button to adjust the volume. 1 2 3 4 5 6 7 8 9 LIST 0 Q.
SPECIAL FUNCTIONS PIP / POP / TWIN PICTURE INPUT D/A TV PIP lets you view 2 different inputs (sources) on the screen at the same time. One source will be large, and the other source will show a smaller inset image. Double window mode splits the screen into 2, allowing 2 picture sources to be shown on the screen at the same time. Each source is given half the screen.
PIP / POP / TWIN PICTURE Input Source Selection for Sub Picture Press the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button is pressed, each input source for the sub picture is displayed. In some models, when the sub picture quality get poor for sub picture, select Auto, PAL, SECAM or NTSC in PIP System menu. ! NOTE You can’t select the same modes for main picture and sub picture simultaneously.
SPECIAL FUNCTIONS PIP / POP / TWIN PICTURE Adjusting PIP Transparency (PIP mode only) STATION 1 2 Press the MENU button and then select the PIP/DW menu. D or E button to Press the G button and then D or E button to select PIP Transparency. PICTURE SOUND TIME SPECIAL Input DW PIP PIP Input Win. Size Win.Position PIP Transparency PIP System SCREEN 3 Press the G button and then F or G button to adjust PIP transparency. 4 Press the EXIT button to return to normal TV viewing.
TELETEXT Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this set can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SPECIAL FUNCTIONS TELETEXT TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 With the BLUE button you can progress from block to block. 2 Use the YELLOW button to proceed to the next group with automatic overflow to the next block.
Special Teletext Functions ? REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. POSITION Displays the picture on the screen while waiting for the new teletext page.
SPECIAL FUNCTIONS EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Button Function in 8 Days Guide Mode Remote Control Buttons RED GREEN YELLOW BLUE F or G D or E PR D or E GUIDE/EXIT FAV i Function Change EPG mode Enter Date setting mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Displayed when the Favourite Programme.
TV MENU ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select each menu. 2 Press the G button and then use D or E or F or G button to display the available menus.
TV MENU / STATION MENU OPTIONS TITLE GUI PIP PR+ SWAP - PIP PR AUTO PROGRAMME (IN DIGITAL MODE) INFO PIP BACK i TEXT MENU PIP INP UT SLEEP EXIT OK Use it to automatically find and store all of the programmes. When you start auto programming in digital mode, all the stored service information will be deleted. VOL STATION 1 Press the MENU button and then D or E button to select the STATION menu.
TV MENU / STATION MENU OPTIONS TITLE GUI - PIP PR MANUAL PROGRAMME TUNING (IN DIGITAL MODE) PIP PR+ SWAP INFO PIP STATION Press the MENU button and then D or E button to select the STATION menu. PICTURE SOUND TIME MUTE PR FAV Auto programme Manual programme Programme edit 5V antenna power Booster Diagnostics SCREEN I/II 1 Press the G button and then D or E button or NUMBER buttons to select the desired channel number.
MENU PROGRAMME EDIT (IN DIGITAL MODE) TEXT EXIT OK When a programme number is skipped, it means that you will be unable to select it using PR D or E button during TV viewing. VOL If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. Press the MENU button and then D or E button to select the STATION menu. PR 2 3 4 5 6 7 8 9 LIST 0 Q.
TV MENU / STATION MENU OPTIONS Mini Glossary Displayed when the TV Programme. PROGRAMME EDIT (IN DIGITAL MODE) Displayed when the Favourite Programme. Displayed when the Locked Programme. Displayed when the Radio Programme. TEXT A Displayed when the Teletext Programme. Skipping a programme number 1 Select a programme number to be skipped with the D or E or F or G button. 2 Press the BLUE button. The skipped programme number turns to blue.
PIP PR 5V ANTENNA POWER (IN DIGITAL MODE ONLY) PIP PIP PR+ SWAP INFO STATION Press the MENU button and then D or E button to select the STATION menu. PICTURE SOUND TIME MUTE EXIT FAV PR Auto programme Manual programme Programme edit 5V antenna power Booster Diagnostics SCREEN I/II 1 Press the G button and then use D or E button to select On or Off. STATION In 5V antenna power On, if the set is short-circuit, it will automatically return to Off.
TV MENU / STATION MENU OPTIONS PIP PR Booster (In Digital Mode only) PIP PIP PR+ SWAP INFO i BACK TEXT MENU PIP INP UT SLEEP EXIT OK In some models, Booster is an optional function. Only a set with Booster can perform this function. If the reception is poor at the fringe area of TV signal, select Booster to On. VOL STATION 1 Press the M E N U button and then D or E button to select the STATION menu.
PIP PR DIAGNOSTICS (IN DIGITAL MODE ONLY) PIP PIP PR+ SWAP INFO PIP INP UT SLEEP EXIT OK It’s displayed the information and signal strength of the turned MUX. It’s displayed the signal information and service name of the selected MUX. VOL STATION Press the M E N U button and then D or E button to select the STATION menu. PICTURE SOUND TIME 2 BACK TEXT MENU This function enables you to watch Manufacturer, Model/Type, Serial Number and Software Version.
TV MENU / STATION MENU OPTIONS MENU AUTO PROGRAMME TUNING (IN ANALOGUE MODE) TEXT EXIT OK All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. VOL 1 Press the M E N U button and then D or E button to select the STATION menu. 2 Press the G button and then D or E button to select Auto programme. 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW STATION Press the G button to select System.
MENU MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) TEXT EXIT OK Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. VOL 1 Press the MENU button and then D or E button to select the STATION menu. 2 Press the G button and then D or E button to select Manual programme. 3 4 5 6 7 8 9 LIST 0 Q.VIEW SOUND SCREEN Press the E button to select Band.
TV MENU / STATION MENU OPTIONS TITLE GUI - PIP PR FINE TUNING (IN ANALOGUE MODE) PIP Press the MENU button and then D or E button to select the STATION menu. 2 Press the G button and then D or E button to select Manual programme. 3 Press the G button and then D or E button to select Fine. 4 STATION PICTURE SOUND Press the G button and then F or G button to fine tune for the best picture and sound. Press the OK button to store it. 6 Press the EXIT button to return to normal TV viewing.
PIP PR INFO PIP PROGRAMME EDIT (IN ANALOGUE MODE) PIP PR+ SWAP i BACK TEXT MENU PIP INP UT SLEEP EXIT OK This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. VOL STATION 1 2.2 3.3 A Press the MENU button and then D or E button to select the STATION menu. PICTURE SOUND Press the G button and then D or E button to select Programme edit.
TV MENU / STATION MENU OPTIONS MENU PROGRAMME EDIT (IN ANALOGUE MODE) TEXT EXIT VOL MUTE FAV PR OK 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW I/II A Moving a programme a Select a programme to be moved with D or E or F or G button. I/II b Press the YELLOW button. c Move the programme to the desired programme number with the D or E or F or G button. d Press the YELLOW button again to release this function.
TEXT MENU FAVOURITE PROGRAMME (IN ANALOGUE MODE) EXIT OK This function lets you select your favourite programmes directly. Repeatedly press the FAV button to select stored favourite programmes. VOL 2 Press the MENU button and then D or E button to select the STATION menu. 3 Press the G button and then D or E button to select - - - - - - -. 4 Select a desired programme with the F or G button or NUMBER buttons. 3 4 5 6 7 8 9 LIST 0 Q.
TV MENU / STATION MENU OPTIONS T M CALLING THE PROGRAMME TABLE OK You can check the programmes stored in the memory by displaying the programme table. A VOL MUTE PR FAV 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW Displaying programme LIST 1 Press the LIST button to display the PROGRAMME LIST menu. I/II The programme list appears on the screen. • You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode.
TV MENU / PICTURE MENU OPTIONS TLE GU PIP PR PSM (PICTURE STATUS MEMORY) PIP PIP PR+ SWAP INFO i BACK TEXT MENU PIP INP UT SLEEP EXIT OK PSM adjusts the set for the best picture appearance. Select the preset value in the PSM menu based on the programme category. When adjusting User options (contrast, brightness, colour, and sharpness or tint) manually, PSM automatically changes to User 1/2.
TV MENU / PICTURE MENU OPTIONS PIP PR+ SWAP PIP PR PICTURE ADJUSTMENT (PSM-USER OPTION) INFO PIP STATION Press the MENU button and then D or E button to select the PICTURE menu. PICTURE SOUND Press the G button and then D or E button to select PSM. 3 Press the G button and then D or E button to select User 1, or User 2. 4 Press the G button and then D or E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness, or Tint).
PIP PR CSM (COLOUR STATUS MEMORY) PIP PIP PR+ SWAP INFO To initialize values (reset to default settings), select the Normal option. When adjusting colour temperature options (red, green, or blue) manually, CSM automatically changes to User. Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. 2 Press the G button and then D or E button to select CSM.
TV MENU / PICTURE MENU OPTIONS PIP PR XD FUNCTION PIP PIP PR+ SWAP INFO XD is LG Electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. PIP INP UT SLEEP EXIT OK Press the MENU button and then D or E button to select the PICTURE menu. VOL 2 Press the G button and then D or E button to select XD. 3 Press the G button and then D or E button to select On or Off.
PIP PR NR (NOISE REDUCTION) PIP Press the MENU button and then select the PICTURE menu. 2 Press the XD. button and then D or E button to select 3 Press the G button and then XD NR or MPEG NR. D or E button to select 4 5 G D or E F or G i BACK TEXT PIP INP UT SLEEP EXIT OK button to VOL STATION Press the G button and then use make appropriate adjustments.
TV MENU / SOUND MENU OPTIONS PIP PR+ SWAP PIP PR SSM (SOUND STATUS MEMORY) INFO PIP Press the MENU button and then D or E button to select the SOUND menu. 2 Press the G button and then D or E button to select SSM. 3 4 STATION PICTURE Press the G button and then D or E button to select SRS TSXT, Flat, Music, Movie, Sports, or User. Flat The most commanding and natural audio. Music Select this option to enjoy the original sound when listening to the music.
TEXT MENU AVL (AUTO VOLUME LEVELER) EXIT OK AVL automatically keeps on an equal volume level even if you change programmes. VOL MUTE 1 1 2 Press the MENU button and then select the SOUND menu. Press the G button and then AVL. D D or E FAV 2 PR 3 button to STATION PICTURE or E button to select SOUND SSM AVL Balance TV Speaker Digital audio out 0 TIME 3 4 Press the G button and then Off or On.
TV MENU / SOUND MENU OPTIONS PIP PR TV SPEAKER PIP PR+ SWAP INFO PIP i BACK TEXT MENU PIP INP UT SLEEP EXIT OK You can adjust the internal speaker status. In AV1, AV2, SAV2, AV3, AV4, COMPONENT, RGB and HDMI/DVI (or HDMI1/DVI) with HDMI to DVI cable, TV speaker and/or variable audio can be outputted even though there is no video signal. VOL MUTE FAV PR If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
PIP PR DIGITAL AUDIO OUT PIP PR+ SWAP INFO PIP i TEXT MENU PIP INP BACK UT SLEEP EXIT OK This function lets you select your preferred Digital Audio Output. The set can output Dolby Digital in a channel only which broadcast Dolby Digital Audio. When it’s applied the Dolby Digital format, if you select Dolby Digital on Digital audio out menu, SPDIF Output will be outputted Dolby Digital.
TV MENU / SOUND MENU OPTIONS STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. A Broadcast Mono Stereo Dual On Screen Display MONO STEREO DUAL I Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II button twice. In mono reception, the depth of sound is improved.
TV MENU / TIME MENU OPTIONS LE G PIP PR CLOCK SETUP PIP PIP PR+ SWAP INFO VOL STATION 1 or E button to 2 Press the G button and then Clock. 3 Press the G button and then F or G button to select either the year, date, or time option. D UT SLEEP EXIT OK The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time function.
TV MENU / TIME MENU OPTIONS PIP PR ON/OFF TIME PIP PR+ SWAP INFO PIP 1 2 D or E UT SLEEP EXIT OK VOL STATION Press the MENU button and then select the TIME menu. PIP INP BACK TEXT MENU The Off time automatically switches the set to standby at the preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time.
GUI TLE/ - PIP PR AUTO SLEEP PIP PR+ SWAP INFO PIP If set to on and there is no input signal, the set turns off automatically after 10 minutes. Press the MENU button and then select the TIME menu. D or E UT SLEEP EXIT OK button to VOL 2 Press the G button and then Auto sleep. D or E button to select 3 Press the G button and then Off or On.
TV MENU / SPECIAL MENU OPTIONS LE G - PIP PR LANGUAGE PIP PIP PR+ SWAP INFO i BACK TEXT MENU PIP INP 4 5 6 7 8 9 LIST 0 Q.VIEW UT SLEEP EXIT SIZE POSITION TIME I/II INDEX REVEAL i OK This function lets you select your preferred language for audio. If the audio data in selected language is not broadcasted, default audio which is broadcasted in current channel will be played.
TEXT MENU SYSTEM LOCK SETTING EXIT OK If you first enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. VOL MUTE PR FAV 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW I/II STATION 1 2 Press the MENU button and then select the SPECIAL menu. Press the G button and then Lock system. D D or E button to PICTURE SOUND TIME or E button to select Language Lock system Child lock ISM Method Low power Set ID Factory reset SPECIAL SCREEN 3 Press the On.
TV MENU / SPECIAL MENU OPTIONS INPUT D/A TV POWER CHILD LOCK DVD TV ARC GUIDE IP PR- The set can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. PIP PR+ SWAP P PIP MENU INFO i BACK TEXT VOL VCR SUBTITL MUTE PR FAV E/ PIP INP UT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW SLEEP EXIT OK This set is programmed to remember which option it was last set to even if you turn the set off.
PIP PR ISM METHOD (OPTION) (IMAGE STICKING MINIMIZATION) PIP PR+ SWAP INFO PIP VOL STATION Press the MENU button and then D or E button to select the SPECIAL menu. Press the G button and then D or E button to select ISM Method. 3 Press the G button and then D or E button to select either Normal, White wash, Orbiter or Inversion. UT SLEEP EXIT OK It’s not available to use this function in 32/37/42LC2D *.
TV MENU / SPECIAL MENU OPTIONS PIP PR LOW POWER (OPTION) PIP PR+ SWAP INFO PIP i PIP INP BACK TEXT MENU This is the function to reduce the power consumption of the set. UT SLEEP EXIT OK It’s not available to use this function in 32/37/42LC2D *. 1.1 Press the MENU button and then select the SPECIAL menu. 2.2 Press the G button and then D or E button to select Low power. D or E button to VOL STATION PICTURE 3.3 4.4 Press the G button and then D or E button to select Off or On.
TV MENU / SCREEN MENU OPTIONS - PIP PR AUTO CONFIG. (RGB [PC] MODE ONLY) PIP MENU PIP PR+ SWAP INFO i PIP INP BACK UT SLEEP TEXT EXIT OK This function is for the automatic adjustment of the screen position, clock, and phase. The displayed image will disappear for a few seconds while the auto configuration is in progress. Although the image is still not correct, your set is functioning properly but needs further adjustment. VOL MUTE PR FAV The Auto config.
TV MENU / SCREEN MENU OPTIONS LE G IP PR- PIP PR+ SWAP PIP INP P MANUAL CONFIG. INFO PIP i BACK TEXT MENU UT SLEEP EXIT OK If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. To correct the screen size, adjust Clock. VOL STATION 1 Press the MENU button and then use to select the SCREEN menu. D or E button 2 Press the G button and then D or E button to select Manual config..
- PIP PR SETTING THE PICTURE FORMAT PIP PIP PR+ SWAP INFO i TEXT MENU You can watch the screen in various picture formats; Spectacle, Full (option), Original, 4:3, 16:9 (Wide), 14:9 and Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. PIP INP BACK UT SLEEP EXIT OK There might be uncomfortable in Full mode. Then change into other mode. You can adjust the enlarge proportion of picture using D or E button.
TV MENU / SCREEN MENU OPTIONS PIP PR SELECTING WIDE XGA MODE PIP PIP PR+ SWAP INFO i To see a normal picture, match the resolution of RGB mode and selection of XGA mode. UT SLEEP TEXT MENU PIP INP BACK EXIT OK This function works in the following mode: RGB[PC], HDMI[PC] mode 1 Press the MENU button and then use D or E button to select the SCREEN menu. 2 Press the G button and then use D or E button to select XGA Mode.
PIP PR INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) PIP PR+ SWAP INFO PIP STATION 2 Press the Reset. 3 Press the G button. G button and then D UT SLEEP EXIT OK VOL Press the MENU button and then select the SCREEN menu. PIP INP BACK TEXT MENU This function operates in current mode. To initialize the adjusted value 1 i D or E button to PICTURE SOUND TIME or E button to select MUTE PR FAV Auto config. Manual config.
APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations(Not standard) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS - PIP PR TXD RXD GND DTR DSR RTS CTS PIP PR+ SWAP INFO PIP i PIP INP BACK TEXT MENU UT SLEEP EXIT Set ID OK Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’. G p .
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) ■ Data length : 8 bits ■ Parity : None Stop bit : 1 bit ■ Communication code : ASCII code ■ Use a crossed (reverse) cable. ■ ■ Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power k 02. Input Select k 03. Aspect Ratio k 04. Screen Mute k 05. Volume Mute k 06. Volume Control k 07. Contrast k 08. Brightness k 09. Colour k 10. Tint (option) k 11. Sharpness k 12. OSD Select k 13.
01. Power (Command 2 : a) 04. Screen Mute (Command 2 : d) G To control Power On/Off of the set. G To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack [k][d][ ][Set ID][ ][Data][Cr] 1 : Power On Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) [a][ ][Set ID][ ][OK][Data][x] Ack G To show Power On/Off. [d][ ][Set ID][ ][OK][Data][x] Transmission 05.
APPENDIX 09. Colour (Command 2 : i) G To adjust the screen colour. You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 83. Ack [i][ ][Set ID][ ][OK][Data][x] 10. Tint (Command 2 : j) (option) G To adjust the screen tint. You can also adjust tint in the PICTURE menu. You can also control the PIP/DW using the PIP/DW button on the remote control or in the PIP/DW menu.
18. Red Adjustment (Command 2 : v) 22. Abnormal State (Command 2 : z) G To adjust red in colour temperature. G To recognize an abnormal state. Transmission [k][v][ ][Set ID][ ][Data][Cr] Transmission Data Min : 0 ~ Max : 50 * Refer to ‘Real data mapping 2’. See page 83. Ack Data FF : Read Ack [k][z][ ][Set ID][ ][FF][ ][Cr] [z][ ][Set ID][ ][OK][Data][x] [v][ ][Set ID][ ][OK][Data][x] 19. Green Adjustment (Command 2 : w) G To adjust green in colour temperature.
APPENDIX 24. Low Power (option) (Command 1 : j, Command 2 : q) G To reduce the power consumption of the set. You can also adjust Low Power in SPECIAL menu. It’s not available to use this function in 32/37/42LC2D models. Transmission [j][q][ ][Set ID][ ][Data][ ][Cr] Data 0 : Off 1 : On Ack [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] [q][ ][Set ID][ ][OK/NG][Data][x] 29. Channel Select Command (Command 1 : m, Command 2 : a) 25.
31. Input select (Command 1 : x, Command 2 : b) (Main Picture Input) G To select input source for main picture. [x][y][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data Structure Data Structure MSB MSB LSB 0 G To adjust input source for sub picture in PIP mode. Transmission Transmission 0 32.
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
Code (Hexa) Function PR D PR E VOL D VOL E Up (D) Down (E) Right (G) Left (F) POWER POWER ON POWER OFF MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 INPUT COMPONENT HDMI RGB TV AV1 AV2 AV3 AV4 SAV2 INFO i GUIDE SUBTITLE EXIT FAV Q.
APPENDIX PROGRAMMING THE REMOTE INPUT D/A TV POWER DVD VCR ARC SUBTITLE PIP PR+ SWAP PIP INP TV The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands.
PROGRAMMING CODES A VCRs Brand Codes Brand Codes Brand Codes Brand Codes AIWA AKAI 034 016 125 072 031 012 035 028 108 003 031 005 065 112 108 012 034 059 006 029 036 129 003 034 031 107 132 012 004 043 031 031 012 040 043 012 048 130 KENWOOD 014 047 001 101 034 003 017 040 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 013 063 031 031 067 101 013 PORTLAND PULSAR QUARTZ QUASAR RCA 108 072 011 033 013 040 107 145 003 031 053 058 148 014 032 105 113
APPENDIX TROUBLESHOOTING CHECKLIST The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. ■ The remote control doesn’t work Is the sleep timer set? Check the power control settings.
TROUBLESHOOTING CHECKLIST The audio function does not work. Press the VOL D or E button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 32LC2D-FC/32LC2DB-FC 37LC2D-FC/37LC2DB-FC 42LC2D-FC/42LC2DB-FC MODELS 32LC2D 32LC2DB Weight 37LC2D 37LC2DB Dimensions (Width x Height x Depth) Weight 42LC2D 42LC2DB 811.0 x 630.0 x 235.0 mm 31.9 x 24.8 x 9.3 inches without stand 811 x 566.8 x 123.5 mm 32.0 x 22.4 x 4.9 inches with stand without stand 21.9 kg / 48.2 lbs 18.5 kg / 40.8 lbs with stand 944.0 x 729.5 x 286.0 mm 37.2 x 28.7 x 11.3 inches without stand 944 x 659.3 x 129.7 mm 37.2 x 26.0 x 5.
APPENDIX PRODUCT SPECIFICATIONS 42PC1D-FC 50PC1D-FC MODELS 42PC1D with stand 1129 x 748.5 x 380 mm 44.5 x 29.5 x 15 inches without stand 1129 x 695 x 103.7 mm 44.5 x 27.4 x 4.1 inches with stand without stand 29.3 kg / 64.6 lbs 25.4 kg / 56.0 lbs with stand 1302.6 x 872 x 355.8 mm 51.3 x 34.4 x 14.0 inches without stand 1302.6 x 810 x 108.7 mm 51.3 x 31.9 x 4.3 inches with stand without stand 51.5 kg / 113.5 lbs 44.3 kg / 97.
