User guide

153
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
23
. Input select ( Command: x b)
(Main Picture Input)
► To select input source for main picture.
Data
Transmission [x][b][ ][Set ID][ ][Data][Cr]
21. Key(Command: m c)
► To send IR remote key code.
Data Key code (See p.145)
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
20. Programme Add/Skip(Command: m b)
► To set skip status for the current Programme.
Data 00 : Skip 01 : Add
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
*
Real data mapping
00 :
Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
CF : Step 199
FE : Step 254
FF : Step 255
22. Control Back Light(Command: m g)
► To Control the back light.
Data Min : 00 to Max : 64
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* In case external input data is DTV, Input number ‘0’ is
AIR, ‘1’ is CATV and ‘2’ is SATELLITE.
Data Input
0x00 DTV
0x01 CADTV
0x02 Sat DTV
0x10 ATV
0x11 CATV
0x20 AV1
0x21 AV2
0x22 AV3
0x40 Component1
0x41 Component2
0x42 Component3
0x60 RGB
0x70/80/90/a0 HDMI1
0x71/81/91/a1 HDMI2
0x72/82/92/a2 HDMI3
0x73/83/93/a3 HDMI4