User’s Guide Specification 1. Model Description MODEL 32LB9D-UJ BRAND 42/50/60PB4DA-UA SUFFIX 2. USA Product Name 담 당 관 리 자 Park SY 07.07.16 KANG KWANG SUK 07.07.16 LG Part No. 32LB9D, 42/50/60PB4DA MFL34797022 (0708-REV01) Printing Specification 1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors • Cover : 1 COLOR (BLACK) • Inside : 1 COLOR (BLACK) 3. Stock (Paper) • Cover : Coated paper , S/White 150 g/㎡ • Inside : Uncoated paper , 백상지 60 g/㎡ 4. Printing Method : Off set 5.
Pagination sheet P/NO.MFL34797022 Total pages : 36 pages Rear cover Front cover LG(EN) P/NO. 2 …. …. ….
LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODEL PLASMA TV MODELS 32LB9D 42PB4DA 50PB4DA 60PB4DA Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
SAFETY INSTRUCTIONS 9 10 Never touch this apparatus or antenna during a thunder or lighting storm. 11 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 12 Refer all servicing to qualified service personnel.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 WATCHING TV PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PREPARATION ACCESSORIES TV IN PU T ST B DIA ME BR IGH ST HO T- ME NU TV IN PU T BR IGH T+ ST B R ME TI RA TIO SIMP LINK BR IGH TV DIA ME T- HO ST ME IN PU T NU BR IGH T+ PREPARATION Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.
FRONT PANEL INFORMATION Here shown may be somewhat different from your TV. ■ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Plasma TV Model PREPARATION ■ Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on.
PREPARTION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV.
HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3. Or DVI (VIDEO) signal to the 1, 2 or 3 port with a DVI to HDMI cable. 2 COMPONENT IN Connect a component video/audio device to these jacks. 3 RGB (PC) Connect the output from a PC. AUDIO (RGB/DVI) Connect the audio from a PC or DTV. 4 REMOTE CONTROL PORT Connect your wired remote control. 5 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. 6 ANTENNA/CABLE IN Connect over-the air signals to this jack.
PREPARATION REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MEDIAHOST PREPARATION MEDIAHOST mode control Controls the MEDIAHOST mode. buttons TV INPUT MEDIAHOST VCR/DVD Control video cassette recorders or DVD players. buttons STB MEDIA HO ST MENU Displays the main menu. BRIGHT +/- Adjust brightness on screen.
STB MEDIA HO ST MEDIA HO ST POWER Turns your TV or any other programmed equipment on or off, depending on the mode. PREPARATION TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2 and HDMI3 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, and HDMI3 (AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, and HDMI3 input sources are linked automatically, only if these are connected ).
PREPARATION STAND INSTALLATION (Only 37LB5D) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided.
ATTACHING THE TV TO A DESK (Only 32LB9D model) PREPARATION The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand 1-Screw (provided as parts of the product) Desk WARNING G This apparatus must be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury/death.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION Plasma TV Model 1 Hold the CABLE MANAGEMENT with both hands and pull it backward as shown. CABLE MANAGEMENT 14 2 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 3 Install the CABLE MANAGEMENT as shown.
LCD TV Model Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT as shown. (Insert it as pushing the loops on the both sides of the cable management.) 3 Bundle the cables using the supplied TWIST HOLDER. PREPARATION 1 CABLE MANAGEMENT ! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
PREPARATION ATTACHING THE TV TO A WALL ■ Here shown may be somewhat different from your TV. PREPARATION We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
DESKTOP PEDESTAL INSTALLATION Plasma TV Model LCD TV Model 4 inches 4 inches 4 inches CAUTION PREPARATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. 4 inches 4 inches G 4 inches 4 inches 4 inches Ensure adequate ventilation by following the clearance recommendations. VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket.
PREPARATION ANTENNA OR CABLE CONNECTION R 1. Antenna (Analog or Digital) R R PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ■ ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for Plasma TV model. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect EXTERNAL EQUIPMENT SETUP Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). 2 1 2 RS(CONTRO COMPONENT IN AUDIO VIDEO S-VIDEO 1 ( Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set. 2. How to use ■ Turn on the DVD player, insert a DVD.
( VCR SETUP ANT IN S-VIDEO ANT OUT OUTPUT SWITCH VIDEO ) L R When connecting with a RCA cable 1. How to connect V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) UDIO B/DVI) 2. How to use REMOTE CONTROL IN RS-232C IN (CONTROL & SERVICE) T IN AUDIO OUT ( Select A V 1 input source by using the I N P U T button on the remote control. ■ If connected to A V I N 2, select A V 2 input source.
EXTERNAL EQUIPMENT SETUP PC SETUP RGB IN When connecting D-sub 15pin cable DMI/DVI IN AUDIO (RGB/DVI) RGB(PC) 1. How to connect REMOTE CONTROL IN RS-232C (CONTROL & SE COMPONENT IN EXTERNAL EQUIPMENT SETUP 1 Connect the RGB output of the PC to the R G B ( P C) jack on the set. 2 Connect the PC audio output to the A U D I O ( R G B / D V I) jack on the set. 1 S-VIDEO 2 AUDIO VIDEO 1 2 RGB OUTPUT AUDIO ( V ( ) 2. How to use Turn on the PC and the TV.
TV INPUT WATCHING TV STB MEDIA HO ST TURNING ON THE TV INPUT TV INPUT First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H (D or E) P O W E R I N P U T button on the TV or press the , , TV INPUT, C H (D or 9 ) button on the remote control. E), Number (0~9 1 When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
CHANNEL SETUP TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HO ST TV INPUT Auto Scan (Auto Tuning) STB STB STB MEDIA HO ST MEDIA HO MEDIA HO ST ST WATCHING TV Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select the each menu. 2 Press the G button and then use D E F G button to display the available menus. Auto Tuning Auto Tuning Manual Tuning Channel Edit Manual Tuning Channel Edit ■ All available TV channels are searched and stored automatically. ■ User can do manual channel selection and add or delete individual channels.
WATCHING TV AUDIO Sound Mode : Standard Auto Volume : On Balance :0 TV Speaker : On ■ Sound Mode lets you enjoy the best sound without any special adjustment. : Standard, Music, Movie, Sports and User ■ Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Balance ■ Adjust the left/right sound of speaker. TV Speaker ■ Turn the TV speaker On or off.
OPTION Language : English Input Label SimpLink : Off Key Lock : Off Caption : Off ISM Method : Orbiter Low Power : Off Set ID :1 Language Input Label Select your desired language for on screen menus : English, Spanish, French. ■ Set a label to each input source. ■ Control and play other AV devices connected to the TV through HDMI cable without additional cables and settings. ■ This feature can be used to prevent unauthorized viewing by locking out the front panel controls.
MEDIAHOST MEDIA ENTRY HOST MODES When you connect a USB device or press the displayed, automatically. MEDIA HO ST button, this screen is Media Host Menu In USB device, you can not add a new folder or delete the existing folder. 1 Press the D or E button to select the desired item. BACK MEDIA HOST 2 Press the ENTER button to move to Photo List or Music List of USB device. 3 Press the USB EJECT button of remote control before removing the USB device.
PHOTO LIST It’s available to playback the photo file(*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. Screen Components 2 1 3 Usable USB memory 1 3 4 MEDIA HOST 2 Current page/Total pages Total number of marked thumbnail photos Corresponding buttons on the remote control 4 Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page.
MEDIAHOST MEDIAHOST Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. MEDIA HOST 1 Use the C H photo page. 2 Use D E F G button to navigate the appropriate thumbnail photos, then press the E N T E R button to show the PopUp menu. 3 Use D or E button to Move to the V i e w menu, then press the E N T E R button.
G H i d e: Hide the menu on the full-sized screen. Use F or G button to select H i d e and press E N T E R button. ■ To see the menu again on the full-sized screen, press E N T E R button to display. Use D E F G button to select the previous or next photo. Use D E F G button to select and control the menu on the full-sized screen. 6 Use E X I T button to go back to the photo list from the full-sized screen.
MEDIAHOST HOST MEDIA Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. MEDIA HOST 1 Use the C H titles page. 2 Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
PRODUCT SPECIFICATIONS ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS Including stand Dimensions (Width x Height x Depth) Excluding stand including stand excluding stand Weight 50PB4DA (50PB4DA-UA) 44.5 x 30.2 x 12.2 inches 1130.0 x 768.1 x 310.4mm 44.5 x 28.1 x 3.3 inches 1130.0 x 715.0 x 85.0 mm 75.8 pounds / 34.4 kg 68.0 pounds / 30.8 kg 60PB4DA (60PB4DA-UA) 51.5 x 35.7 x 14.6 inches 60.9 x 41.8 x 17.6 inches 1308.0 x 906.1 x 370.0 mm 1548.
APPENDIX OPEN SOURCE SOFTWARE NOTICE The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL/LGPL/MPL License Agreements: GPL EXECUTABLES: ■ Linux kernel 2.6.12 ■ busybox LGPL LIBRARIES: ■ uclibc MPL LIBRARIES: ■ Nanox APPENDIX LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: Opensource@lge.