LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS 2 6 L C 4* 2 6 L C 5* 3 2 L C 4* 3 2 L C 5* 3 7 L C 4* 3 7 L C 5* 4 2 L C 4* 4 2 L C 5* 26LB7* 32LB7* PLASMA TV MODELS 4 2 P C 5* 5 0 P C 5* 5 0 P B 6* 4 2 P C 3* 5 0 P C 3* 6 0 P C 4* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. Owner's Manual Owner’s manual Power Cord IN PU D/A T TV/RA INPU DIO T PO BR SIM PLINK TE IG W ER M O D TV E HT DV XT VC RA TIO Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior.
CONTENTS ACCESSORIES ............................................. 1 CONTENTS PREPARATION Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 7 Stand installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Attaching the TV to a wall . . . . . . . . . . . . . . . . . . . . 13 Attaching the TV to a desk . . . . . . . . . . . . . . . . . . . 14 Back Cover for Wire Arrangement . . . . . . . . . . . . .
SOUND & LANGUAGE CONTROL Teletext within Digital Service . . . . . . . . . . . . . . . 98 Teletext in Digital Service . . . . . . . . . . . . . . . . . . 98 APPENDIX CONTENTS Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 80 Preset Sound Settings - Sound Mode . . . . . . . . . . 81 Sound Setting Adjustment - User Mode . . . . . . . . . . 82 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . . .
PREPARATION FRONT PANEL CONTROLS A A This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. Plasma TV Models 42/50PC5*, 60PC4* PREPARATION Remote Control Sensor INPUT INPUT OK MENU INPUT Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
Plasma TV Models PREPARATION 42/50PC3* PROGRAMME Buttons PR VOLUME Buttons VOL OK OK Button MENU MENU Button INPUT INPUT Button ON/OFF Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
PREPARATION LCD TV Models Except 26/32LB7* PREPARATION PR PROGRAMME Buttons VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button R /I Remote Control Sensor POWER Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
A This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. Plasma TV Models Except 42/50PC3* AV IN 3 VIDEO L/MONO AUDIO R S-VIDEO VIDEO L/MONO AUDIO R S-VIDEO AV IN 3 S-Video Input Connect S-Video out from an S-VIDEO device. VIDEO R AUDIO L/MONO S-VIDEO AV IN 3 9 1 EJECT PCMCIA CARD SLOT EJECT RGB IN Audio/Video Input Connect audio/video output from an external device to these jacks.
PREPARATION Only 42/50PC3* PREPARATION VIDEO L/MONO AUDIO R S-VIDEO AV IN 3 S-Video Input Connect S-Video out from an S-VIDEO device. Audio/Video Input Connect audio/video output from an external device to these jacks.
Except 26/32LB7* S-VIDEO VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R S-Video Input S-VIDEO Connect S-Video out from an SVIDEO device. VIDEO L/MONO AUDIO R S-VIDEO Audio/Video Input Connect audio/video output from an external device to these jacks.
PREPARATION Only 26/32LB7* S-VIDEO VIDEO L/MONO AUDIO R USB IN VIDEO L/MONO AUDIO R PREPARATION S-Video Input S-VIDEO Connect S-Video out from an SVIDEO device. VIDEO L/MONO AUDIO R Audio/Video Input Connect audio/video output from an external device to these jacks.
STAND INSTALLATION (Only 42/50PC3*) ■ This feature is not available for all models. 1 PREPARATION 2 A 4 3 B C ■ Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1. Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward. ■ Pull the stand out as shown above in Figures 2 ~ 3. After unfolding the stand,please insert and tighten the screws in the holes (B)on the bottom of the stand.
PREPARATION STAND INSTALLATION (Only 26, 32, 37 inch LCD TV Models) PREPARATION 12 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided.
ATTACHING THE TV TO A WALL This feature is not available for all models. Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. A The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall.
PREPARATION ATTACHING THE TV TO A DESK (Only 26/32LB7* model) The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. PREPARATION 1-screw Stand Desk ! WARNING G 14 To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
BACK COVER FOR WIRE ARRANGEMENT Plasma TV models (Except 42/50PC3*) Hold the C A B L E M A N A G E M E N T with hands and push it as shown. PREPARATION 1 CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 3 Reinstall the C A B L E M A N A G E M E N T as shown.
Plasma TV models Only 42PC3* PREPARATION Arrange the cables as shown picture. Only 50PC3* 1 Hold the C A B L E M A N A G E M E N T with both hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 3 16 Reinstall the C A B L E M A N A G E M E N T as shown.
LCD TV models (Except 26/32LB7*) Connect the cables as necessary. PREPARATION 1 To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 2 Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT 3 Bundle the cables using the supplied twister holder. (This feature is not available for all models.) How to remove the cable management Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.
PREPARATION LCD TV model (Only 26/32LB7*) PREPARATION 1 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 2 Install the C A B L E M A N A G E M E N T as shown. (Insert it as pushing the loops on the both sides of the cable management.) CABLE MANAGEMENT 3 Bundle the cables using the supplied twist holder. (This feature is not available for all models.
■ ■ The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
PREPARATION Wall Mount: Horizontal installation For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP ■ This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.However,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below.
PCMCIA CARD SLOT When connecting with a HDMI cable EJECT HDMI/DVI IN 1 HDMI IN 2 ANTENNA IN VIDEO AUDIO RGB IN AV 1 RS-232C IN Except 26/32LB7* HDMI/DVI IN 1 Connect the digital set-top box to H D M I / D V I I N 1or H D M I I N 2 jack on the set. 2 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 3 Select HDMI1 or HDMI2 input source with using the I N P U T button on the remote control.
When connecting with a HDMI to DVI cable Except 26/32LB7* HDMI/DVI IN 1 AV 1 HDMI IN 2 1 ANTENNA IN 2 AV 2 PCMCIA CARD SLOT EJECT ECT HDMI/DVI IN 1 Connect the digital set-top box to H D M I / D V I I N 1 jack on the set. Connect theAUDIO audio output of the digital set-top box to VIDEO the A U D I O I N ( R G B / D V I ) jack on the set. ANTENNA ENNA IN DMI/DVI IN 1 HDMI IN 2 3 4 Select HDMI1 input source with using the I N P U T AV 1 AV 2 button on the remote control.
DVD SETUP When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. 2 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD. 1 Select COMPONENT input source with using the I N P U T button on the remote control. 5 Refer to the DVD player's manual PCMCIAfor operating EJECT CARD SLOT HDMI/DVI IN 1 instructions.
ANTENNA IN EXTERNAL EQUIPMENT SETUP VIDEO AUDIO RS-232C IN When connecting with a Euro Scart PCMCIA CARD SLOT EJECT 1 1 HDMI IN 2A V 1 Connect the Euro scart socketHDMI/DVI of theINDVD to the Euro scart socket on the set. 2 Turn on the DVD player,ANTENNA insert a DVD. 3 Select AV1 input source with using the I N P U T button on the remote control. RS-232C IN If connected to AV2 Euro scart socket, select AV2 input source.
AV 2 VIDEO L/MONO AUDIO R AV 1 AUDIO AV IN 3 When connecting HDMI cable Except 26/32LB7* AV 1 MI IN 2 AV 2 PCMCIA CARD SLOT HDMI/DVI IN 1 3 Select HDMI1or HDMI2 input source with using the I N P U T button on the remote control. ANTENNA IN OPTICAL Refer to the DVD player's manual for operating instructions. COMP EXTERNAL EQUIPMENT SETUP 2 A RGB(P Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set.
EXTERNAL EQUIPMENT SETUP INSERTION OF CI MODULE - To view the scrambled (pay) services in digital TV mode. - T h i s f e a t u r e i s n o t a v a i l a b l e i n a l l co u n t r i e s . PCMCIA CARD SLOT EJECT HDMI IN 1 HDMI IN 2 1 EXTERNAL EQUIPMENT SETUP 28 ANTENNA IN TV 1 Insert the CI Module to P C M C I A (Personal Computer Memory Card International Association) C A R D S L O T of TV as shown. For further information, see p.54.
To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of PCMCIA EJECT SLOT the screen may CARD remain visible on theHDMI/DVI screen.
EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart PCMCIA CARD SLOT VI IN 1 1 HDMI IN 2 EJECT HDMI/DVI IN 1 HDMI IN 2 Connect the Euro scart socket of the VCR to the A V 1 Euro scart AV socket on2the set. 1 AV RGB IN B(PC) AUDIO IN (RGB/DVI) AV 1 AV 2 MPONENT IN ANTENNA 2 IN VCR and press PLAY on Insert a video tape into the VIDEO the VCR. (Refer to the VCR owner’s manual.) 3 RS-232C I NINP U T button Select AV1 input source with using the on the remote control.
AV 1 HDMI IN 2 AV 2 When connecting with an S-Video cable S-VIDEO Connect the S-VIDEO output of the VCR to the S V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. VIDEO L ANT IN R AUDIO 1 IN Connect the audio outputs of the VCR to the A U D I O input jacks on the set. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set EXTERNAL EQUIPMENT SETUP 32 VIDEO L R VIDEO L/MONO AUDIO R S-VIDEO 1 AV IN 3 1 V I D E O jacks between TV and external equipment. Match the jack colors. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV3 input source with using the I N P U T button on the remote control. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable PCMCIA CARD SLOT Connect the RGB output of the PC to the R G B ( P C) jack on the set. ANTENNA RS-232C IN 2 1 4 Select RGB input source with using the I N P U T button on the remote control. AV 2 AUDIO VIDEO AUDIO VIDEO RS-232C IN SERVICE) Turn on the PC and the set.
! NOTE G To EXTERNAL EQUIPMENT SETUP 34 enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly. G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode.
Supported Display Resolution Except 26/32LB7* RGB[PC] / HDMI[PC] mode Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.476 60.123 47.78 47.72 47.56 66.647 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 59.988 640x480 800x600 832x624 1024x768 1280x768 1360x768 1366x768 1920x1080 Resolution 640x480 720x480 720x576 1280x720 1920x1080 Horizontal Frequency(kHz) Vertical Frequency(Hz) 31.469 31.469 31.47 31.50 31.25 37.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT INFO i MENU EXIT Auto Configure (RGB [PC] mode only) GUIDE OK OK Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment.
7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT Adjustment for screen Phase, Clock, Position GUIDE OK OK If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. GUIDE INFO i BACK FAV * VOL PR VOL PR FAV To correct the screen size, adjust C l o c k. MUTE RATIO SLEEP 2 3 SUBTITLE UPDATE This function works in the following mode : RGB[PC].
EXTERNAL EQUIPMENT SETUP 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT Selecting Wide XGA mode INFO i MENU EXIT GUIDE OK To see a normal picture, match the resolution of RGB mode and selection of XGA mode. This function works in the following mode: RGB[PC] mode OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 EXTERNAL EQUIPMENT SETUP RATIO SLEEP 2 3 SUBTITLE UPDATE SETUPO Auto Config. PICTUREO Manual Config.
7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT Initializing (Reset to original factory settings) GUIDE OK OK GUIDE INFO i This function operates in current mode. To initialize the adjusted value BACK FAV * VOL PR VOL PR FAV 1 Press the MENU button and then select the OPTION menu. 2 Press the G button and then Factory Mode. D 3 Press the G button and then Factory Reset. D 4 Press the OK button.
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD POWER Switches the set on from standby or off to standby. D/A INPUT Selects digital or analogue mode. Switches the set on from standby. BRIGHT VCR SIMPLINK TEXT RATIO TV/RADIO Selects Radio or TV channel in digital mode. I/II INPUT External input mode rotate in regular sequence. Switches the set on from standby.
INPUT D/A POWER TV/RADIO INPUT MODE Selects the remote operating modes. MODE TV See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. (G p.62) DVD BRIGHT VCR SIMPLINK TEXT RATIO I/II TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 1 RATIO Selects your desired picture format.
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the set on from standby or off to standby. TV D/A POWER TV/RADIO TEXT I/II INPUT D/A INPUT Selects digital or analogue mode. Switches the set on from standby. MUTE INPUT External input mode rotate in regular sequence. Switches the set on from standby. 1 2 3 4 5 6 7 8 9 LIST 0 Q.
TV D/A POWER TV/RADIO TEXT I/II INPUT 1 TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. MUTE 1 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW RATIO Selects your desired picture format. SLEEP Sets the sleep timer. SUBTITLE Recalls your preferred subtitle in digital mode.
WATCHING TV /PROGRAMME CONTROL TURNING ON THE TV - If your TV will be turned on, you will be able to use its features. INPUT D/A POWER TV/RADIO INPUT 1 First, connect power cord correctly. At this moment, the TV switches to standby mode.
PROGRAMME SELECTION INPUT BRIGHT VCR SIMPLINK TEXT 1 RATIO I/II Press the P R + or - or NUMBER buttons to select a programme number. BACK MENU INFO i EXIT GUIDE OK FAV VOL PR MUTE 1 Press the VOL + or - button to adjust the volume. If you want to switch the sound off, press the MUTE button. TV/RADIO TEXT You can cancel this function by pressing the MUTE, VOL + or - , or I/II button. I/II MUTE 1 2 3 4 5 6 7 8 9 LIST 0 Q.
WATCHING TV /PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then D or E button to display each menu. 2 Press the G button and then D or E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F or G button. You can move to the higher level menu by pressing the O K or M E N U button.
AUTO PROGRAMME TUNING (IN DIGITAL MODE) 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK Use it to automatically find and store all of the programmes. OK GUIDE INFO i When you start auto programming in digital mode, all the stored service information will be deleted. BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 2 Press the G button and then D or E button to select Auto Tuning. Press the G button to begin auto tuning.
WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Manual Tuning.
PROGRAMME EDIT (IN DIGITAL MODE) TV D/A POWER BACK INPUT MENU INFO i EXIT TV/RADIO TEXT I/II GUIDE MUTE OK 1 2 3 When a programme number is skipped, it means that you will be unable to select it using PR + or - button during TV viewing. 4 5 6 7 8 9 If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. LIST 0 Q.VIEW FAV This function enables you to skip the stored programmes.
WATCHING TV /PROGRAMME CONTROL Mini Glossary Displayed when the DTV Programme. A TEXT Displayed when the Teletext Programme. Displayed when the Locked Programme. Displayed when the Subtitle Programme. Displayed when the Radio Programme. Displayed when the Scramble Programme. Displayed when the MHEG Programme. Displayed when the Dolby Programme. Skipping a programme number WATCHING TV / PROGRAMME CONTROL 1 Select a programme number to be skipped with the D or E or F or G button.
5V ANTENNA POWER (IN DIGITAL MODE ONLY) Even if there isn’t a special 5V adapter power in the external antenna, this function can output 5V in the set. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 2 Press the G button and then use D or E button to select 5V Antenna Power. MENU Prev. 1 Press the G button and then use D or E button to select On or Off.
WATCHING TV /PROGRAMME CONTROL SOFTWARE UPDATE (IN DIGITAL MODE ONLY) Software Update means software can be downloaded through the digital terrestrial broadcasting system. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK OK GUIDE INFO i BACK FAV * VOL 1 Press the MENU button and then select the SETUP menu.
DIAGNOSTICS (IN DIGITAL MODE ONLY) This function enables you to watch Manufacturer, Model/Type, Serial Number and Software Version. It’s displayed the information and signal strength of the tuned MUX. It’s displayed the signal information and service name of the selected MUX. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO Press the M E N U button and then D or E button to select the SETUP menu.
WATCHING TV /PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY) This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you can’t watch the pay services. When the module is inserted to CI slot, you can access the module menu. To purchase a module and smart card, contact your supplying dealer. Do not often insert or remove a CAM module from the set. It may cause a trouble.
AUTO PROGRAMME TUNING (IN ANALOGUE MODE) All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. TV D/A POWER BACK INPUT MENU INFO i EXIT TV/RADIO TEXT I/II GUIDE MUTE OK 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW FAV VOL MENU EXIT MUTE OK GUIDE INFO i PR 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW BACK Press the M E N U button and then D or E button to select the SETUP menu.
WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. TV D/A POWER BACK INPUT MENU TV/RADIO TEXT I/II GUIDE MUTE OK 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW FAV VOL MENU EXIT GUIDE INFO i PR MUTE OK 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW BACK WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the SETUP menu.
FINE TUNING (IN ANALOGUE MODE) Normally fine tuning is only necessary if reception is poor. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK OK GUIDE INFO i 1 Press the MENU button and then D or E button to select the SETUP menu. BACK FAV VOL * PR VOL PR FAV Press the G button and then D or E button to select Manual Tuning. 3 Press the G button and then D or E button to select Fine.
WATCHING TV /PROGRAMME CONTROL PROGRAMME EDIT (IN ANALOGUE MODE) MENU EXIT OK GUIDE INFO i This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number.
SIMPLINK TEXT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW MENU RATIO I/II BACK * VOL FAV VOL PR PR FAV MUTE RATIO SLEEP SUBTITLE UPDATE EXIT INDEX TIME HOLD REVEAL BACK MENU EXIT INFO i 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW POSITION INDEX TIME GUIDE ? OK OK INFO i A GUIDE Moving a programme Select a programme to be moved with D or E or F or G button. b Press the YELLOW button. c Move the programme to the desired programme number with the D or E or F or G button.
WATCHING TV /PROGRAMME CONTROL CALLING THE PROGRAMME TABLE EXIT LIST You can check the programmes stored in the memory by displaying the programme table. 0 MENU GUIDE Q.VIEW EXIT OK OK FAV GUIDE INFO i VOL BACK VOL * MUTE 7 8 9 LIST 0 Q.VIEW PR FAV A PR Displaying programme LIST WATCHING TV / PROGRAMME CONTROL DTV List D 1 Press the LIST button to display the PROGRAMME LIST menu. The programme list appears on the screen. • You may find some blue programmes.
INPUT SOURCE SELECTION LIST 0 MENU Q.VIEW BACK EXIT MENU INFO i EXIT Sets a label to each input source which is not in use. GUIDE OK OK INFO i 1 Press the M E N U button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Input Label. 3 Press the G button and then use D or E button to select the source: AV1, AV2, Comp., RGB, HDMI1 or HDMI2. 5 Press the F or G button to select the label.
WATCHING TV /PROGRAMME CONTROL FUNCTION (except 42/50PC3*) 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK OK This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. GUIDE INFO i BACK FAV * VOL This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. PR VOL PR FAV MUTE 1 RATIO SLEEP 2 3 SUBTITLE UPDATE If you do not want SIMPLINK menu, select “Off”.
SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, OK, buttons. , , , , , and Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it. Power off all devices When you power off TV, all connected devices are turned off.
PICTURE CONTROL EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Button Function in NOW/NEXT Guide Mode Remote Control Buttons RED YELLOW BLUE F or G or E PR + or GUIDE/EXIT TV/RADIO INFO i D Function Change EPG mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Select TV or RADIO Programme The detail information on or off Button Function in 8 Days Guide Mode F or G or E PR + or GUIDE/EXIT TV/RADIO INFO i D Function
PICTURE CONTROL Button Function in Extended Description Box Remote Control Buttons D or E YELLOW INFO i GUIDE/EXIT Function Text Up/Down Enter Timer Record/Remind setting mode The detail information on or off Switch off EPG PICTURE CONTROL Button Function in Record/Remind Setting Mode - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable.
PICTURE SIZE (ASPECT RATIO) CONTROL 7 8 9 LIST 0 Q.VIEW MENU EXIT BACK MENU EXIT INFO i GUIDE OK You can watch the screen in various picture formats; OK Spectacle (except 26/32LB7*, 42/50PC3*, 6 0 P C 4 * ), F u l l, O r i g i n a l, 4 : 3, 1 6 : 9, 1 4 : 9 and GUIDE INFO i Z o o m 1 / 2. BACK FAV * VOL If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
PICTURE CONTROL • 16:9 Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). • Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped. 16:9 Zoom1 PICTURE CONTROL • 14:9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode.
PRESET PICTURE SETTINGS 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT Picture Mode-Preset GUIDE OK OK Dynamic Standard Mild User 1/2 BACK FAV * VOL PR Press the G button and then D or E button to select Picture Mode. 3 Press the G button and then D or E button to select Intelligent Eye (only 26/32LB7*), Dynamic, Standard, Mild, User 1, or User 2.
PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU EXIT INFO i GUIDE OK OK GUIDE INFO i To initialize values (reset to default settings), select the Cool option. BACK FAV * VOL PR VOL PR FAV Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
MANUAL PICTURE ADJUSTMENT 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT Picture Mode-User option MENU INFO i EXIT GUIDE OK OK Contrast Brightness Colour Sharpness Tint Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.
PICTURE CONTROL 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT Colour Tone - User option MENU INFO i EXIT GUIDE OK OK To adjust red, green, blue to any colour temperature you prefer. GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO SLEEP 2 3 SUBTITLE UPDATE SETUPO Picture Mode PICTUREO Colour Temperature AUDIOO 1 PICTURE CONTROL 2 Press the M E N U button and then D or E button to select the PICTURE menu.
XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT It’s not available to use this function in RGB-PC mode. GUIDE OK OK GUIDE INFO i 1 Press the MENU button and then D or E button to select the PICTURE menu. BACK FAV * VOL PR VOL PR FAV 2 Press the G button and then D or E button to select XD.
PICTURE CONTROL DEMO 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT Use it to see the difference between XD Demo on and XD Demo off. MENU INFO i EXIT GUIDE OK OK GUIDE INFO i It’s not available to use this function in RGB[PC], HDMI[PC] mode. BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 SLEEP 2 3 SUBTITLE UPDATE Press the MENU button and then D or E button to select the PICTURE menu.
ADVANCED - CINEMA 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT Set up the TV for the best picture appearance for viewing movies. MENU INFO i EXIT GUIDE OK OK GUIDE INFO i This feature operates only in DTV, AV, S-Video and Component 480i/576i mode. BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 SLEEP 2 3 SUBTITLE UPDATE SETUPO Picture Mode PICTUREO Colour Temperature Press the M E N U button and then D or E button to select the PICTURE menu.
PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL 7 8 9 LIST 0 Q.VIEW MENU When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI.
PICTURE RESET 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced at the factory. MENU EXIT INFO i GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 SLEEP 2 3 SUBTITLE UPDATE Press the M E N U button and then D or E button to select the PICTURE menu.
PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE It’s not available to use this function in LCD models.
LOW-POWER PICTURE MODE This is the function to reduce the power consumption of the set. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT INFO i MENU EXIT GUIDE OK OK It’s not available to use this function in LCD TV models. GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO Press the MENU button and then select the OPTION menu. 2 Press the G button and then D or E button to select Factory Mode. 3 Press the G button and then D or E button to select Low power.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT AVL automatically keeps on an equal volume level even if you change programmes. GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 2 Press the MENU button and then select the AUDIO menu.
PRESET SOUND SETTINGSSOUND MODE 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. GUIDE OK OK GUIDE INFO i BACK FAV Sound Mode lets you enjoy the best sound without any Special adjustment because the TV sets the appropriate sound options based on the programme content.
SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK Adjust the sound equalizer. OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 2 SOUND & LANGUAGE CONTROL 3 Press the M E N U button and then D or the AUDIO menu. Press the G button and then D or Sound Mode.
BALANCE 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT You can adjust the sound balance of speaker to the levels you prefer. MENU INFO i EXIT GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 2 3 Press the G button and then Balance. D Press the G button and then desired adjustment.
SOUND &LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK You can adjust the internal speaker status. OK GUIDE INFO i In AV1, AV2, AV3, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, TV speaker and/or variable audio can be outputted even though there is no video signal. BACK FAV * VOL PR VOL PR FAV If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
SELECTING DIGITAL AUDIO OUT 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT This function lets you select your preferred Digital Audio Output. The set can output Dolby Digital in a channel only which broadcast Dolby Digital Audio. When it’s applied the Dolby Digital format, if you select Dolby Digital on Digital audio out menu, SPDIF Output will be outputted Dolby Digital. Even if it’s selected Dolby Digital, when it doesn’t apply Dolby Digital format, SPDIF Output will be outputted PCM.
SOUND &LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. SOUND & LANGUAGE CONTROL 86 Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the depth of sound is improved.
NICAM Reception (In Analogue Mode Only) If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
SOUND &LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION Installation guide menu appears on TV screen when it is turned on for the first time. BACK MENU INFO i EXIT 1 Press the D or E or F or G button and then, O K button to select your desired language. 2 Press the D or E button and then, O K button to select your country.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY) A u d i o function lets you select your preferred language for audio. If the audio data in selected language is not broadcasted, default language audio will be played. SIMPLINK TEXT BACK RATIO MENU EXIT I/II INFO i 3 Press the G button and then use D or E button to select A u d i o, S u b t i t l e or S u b t i t l e H a r d o f h e a r i n g. 4 Press the G button and then use F or G button to select your desired language.
TIME SETTING CLOCK SETUP 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU EXIT The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time function. INFO i GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 Press the MENU button and then select the TIME menu. 2 Press the G button and then D or E button to select Clock.
AUTO ON/OFF TIMER SETTING The Off time automatically switches the set to standby at the preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. Off time function overrides On timer function if they are set both to the same time. The set must be in standby mode for the On timer to work.
TIME SETTING AUTO SHUT-OFF SETTING If set to on and there is no input signal, the set turns off automatically after 10 minutes. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU EXIT INFO i GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 RATIO 1 Press the MENU button and then select the TIME menu. 2 Press the G button and then D or E button to select Auto Sleep.
TIME ZONE SETUP When you select a Time Zone city, TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) information which is received to broadcasting signal when time is set automatically by a digital signal. 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT GUIDE OK OK GUIDE INFO i BACK 1 Press the MENU button and then select the TIME menu. D or E button to FAV * VOL PR VOL PR FAV MUTE 2 Press the G button and then Time Zone.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM If you first enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. TV/RADIO TEXT I/II MUTE BACK MENU INFO i EXIT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW MENU GUIDE OK FAV EXIT VOL OK MUTE 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW GUIDE INFO i BACK VOL PR * PR FAV PARENTAL CONTROL / RATING 94 1 Press the MENU button and then select the OPTION menu.
PARENTAL CONTROL INPUT D/A POWER TV/RADIO TV D/A DVD INPUT This function operates according to information from the broadcasting station. Therefore if the signal has wrong information, this function dose not operates. MODE TV POWER TV/RADIO TEXT BRIGHT INPUT I/II MUTE VCR BACK MENU EXIT Lets you set up blocking schemes to block specific channels, ratings, and external viewing sources. INFO i GUIDE 1 2 3 4 5 6 7 8 9 LIST 0 Q.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK only. The set gives you access to a digital teletext which is greatly improved in various aspects such as text, graphics and so on. This digital teletext can be accessed by special digital teletext services and specific services which broadcast digital teletext. You should select off from the subtitle language to display teletext by pressing SUBTITLE button.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the product Press the VOL + or - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust Balance in menu option. A A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) 26LC45-ZA 26LC46-ZC 32LC45-ZA 32LC46-ZC 37LC45-ZA 37LC46-ZC 42LC45-ZA 42LC46-ZC 926.6 x 697.6x 280.4mm 36.5x 27.5 x 11.0 inches 1032.7 x 750.0 x 287.6 mm 40.7x 29.5 x 11.3 inches without stand 676.4 x 474.5 x 85.0 mm 26.6 x 18.7 x 3.3 inches 806.8 x 548.6 x 79.0 mm 31.8 x 21.6x 3.1 inches 926.6 x 635.6 x 88.0mm 36.5x 25.0 x 3.5 inches 1032.7 x 685.5 x 88.5 mm 40.7 x 27.0 x 3.5 inches 10.04kg / 22.1 lbs 9.04kg / 19.
26LB7* 32LB7* 42PC3* 50PC3* 26LB75-ZE 26LB76-ZF 32LB75-ZB 32LB76-ZD 42PC35-ZC 50PC35-ZC with stand 671.8x539.8x254.2 mm 26.4x21.2x10 inches 805.8x619.7x283.9 mm 31.7x24.4x11.2 inches 1129.0 x 748.5 x 333.6 mm 44.4 x 29.5 x 13.1 inches 1302.6 x 872 x 355.8 mm 51.3 x 34.3 x 14 inches without stand 671.8x476.1x85 mm 26.4x18.7x3.3 inches 805.8x554.1x79.0 mm 31.7x21.8x3.1 inches 1129.0 x 695.0 x 103.7 mm 44.4 x 27.4 x 4.1 inches 1302.6 x 810x 107.7 mm 51.3 x 31.9 x 4.2 inches 14 kg / 30.
APPENDIX PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 Test your remote control.
VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153 010 045 026 034 137 150 015
APPENDIX IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
Code (Hexa) Function PR + PR VOL + VOL Up (D) Down (E) Right (G) Left (F) POWER MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 INPUT INFO i GUIDE SUBTITLE EXIT FAV Q.
APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
Set ID 7 8 9 LIST 0 Q.VIEW MENU BACK EXIT MENU INFO i EXIT Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p .113 GUIDE OK OK GUIDE INFO i BACK FAV * VOL PR VOL PR FAV MUTE 1 1 Press the M E N U button and then use D or E button to select the OPTION menu. 2 Press the G button and then use D or E button to select Factory Mode. 3 Press the G button and then use D or E button to select Set ID.
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Colour 10. Tint 11. Sharpness 12. OSD Select 13. Remote control lock mode 14.
01. Power (Command 2 : a) 04. Screen Mute (Command 2 : d) G To control Power On/Off of the set. G To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack [k][d][ ][Set ID][ ][Data][Cr] 1 : Power On Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) [a][ ][Set ID][ ][OK][Data][x] Ack G To show Power On/Off. [d][ ][Set ID][ ][OK][Data][x] Transmission 05.
APPENDIX 09. Colour (Command 2 : i) 14. Balance (Command 2 : t) G To adjust the screen colour. G To adjust balance. You can also adjust colour in the PICTURE menu. Transmission You can also adjust balance in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 113. Ack Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 113.
19. Abnormal State (Command 2 : z) G To recognize an abnormal state. 21. Low Power (Command 1 : j, Command 2 : q) G To reduce the power consumption of the set. You can Transmission also adjust Low Power in OPTION menu. It’s not available to use this function in LCD TV models.
APPENDIX 22. Auto Configure (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] 25. Input select (Command 1 : x, Command 2 : b) (Main Picture Input) G To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 23.
116
117