PLASMA TV OWNER’S MANUAL 42PG10 42PG20 42PG20C 50PG30 50PG10 50PG20 50PG20C 60PG30 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
10 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 13 Refer all servicing to qualified service personnel.
CONTENTS FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 SIMPLINK . . . . . . . . . . . . . . . . . . . .
SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 56 Clear Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 58 Sound Setting Adjustment - User Mode . . . . . . . . . . . 59 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 TV Speakers On/Off Setup .
FEATURE OF THIS TV is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. 6 Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.
PREPARATION ACCESSORIES RA TIO SO UN Q. MEN D U MEN U RE TU RN AV VO 1 L FA V CH MU TE 2 4 W ER SL EE P PIC IN TURE PU T E A G MO DE P 3 5 7 PO EN TE R PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 6 8 9 0 FLASH BK 1.5V 1.5V Copyright© 2007 LGE, All Rights Reserved.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Image shown may differ from your TV. ■ NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). 42/50PG10 Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
BACK PANEL INFORMATION Image shown may differ from your TV. HDMI IN 3 7 R VIDEO L/MONO AUDIO R 9 PREPARATION USB SERVUCE ONLY R ■ 10 1 AV IN 2 ANTENNA/ CABLE IN 5 3 RGB IN RGB(PC) RS-232C IN (CONTROL & SERVICE) AUDIO (RGB/DVI) 4 DIGITAL AUDIO OUT 2 AV IN 1 7 REMOTE CONTROL IN OPTICAL S-VIDEO 1 6 COMPONENT IN HDMI/DVI IN 2 2 AUDIO 1 VIDEO (MONO) 1 AUDIO VIDEO 8 ( 1 2 AV (Audio/Video) IN Analog composite connection. Supports standard ( definition video only (480i).
PREPARATION STAND INSTALLATION (Only 42PG10/20/20C) ■ PREPARATION 10 Image shown may differ from your TV. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV.
CABLE MANAGEMENT ■ Image shown may differ from your TV. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. PREPARATION 1 CABLE HOLDER CABLE MANAGEMENT CLIP CABLE MANAGEMENT CLIP How to remove the CABLE MANAGEMENT CLIP 42PG10/20/20C G First, press the cable management.
PREPARATION DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. PREPARATION For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches CAUTION G 4 inches Ensure adequate ventilation by following the clearance recommendations. SWIVEL STAND (Only 50/60PG30) After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.
VESA WALL MOUNTING 400 mm PREPARATION This TV accepts VESA FDMI compliant mounts via the four screw holes on the back of the TV. These mounts are sold by third parties and not available from LG. Refer to the instructions included with the mount for more info. R 400 mm ! NOTE G Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount. PROTECTION COVER ( ■ ) Image shown may differ from your TV.
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING ■ PREPARATION ■ You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
■ To prevent damage do not connect to the power outlet until all connections are made between the devices. R ANTENNA OR CABLE CONNECTION Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTENNA/ CABLE IN R Wall Antenna Socket R Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed. PREPARATION 1.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. RGB(PC) EXTERNAL EQUIPMENT SETUP Component Connection 1.
RGB IN AUDIO (RGB/DVI) RGB(PC) 1. How to connect 1 Connect the digital set-top box to H D M I / D V I I N 1, 2 , or H D M I I N 3 jack on the TV. OMPONENT IN 2 PR B 2 No separate audio connection is necessary. ( HDMI supports both audio and video. HDMI/DVI IN R L 1 EO ) AUDIO 2. How to use EXTERNAL EQUIPMENT SETUP HDMI Connection 1 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect EXTERNAL EQUIPMENT SETUP CABLE IN Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 , or H D M I I N 3 jack on the TV. 1 Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the TV. 2 RGB IN COMPONENT IN HDMI/DVI IN 2 PB 2. How to use AUDIO (RGB/DVI) RGB(PC) PR R L 1 ( ) VIDEO AUDIO Turn on the digital set-top box.
DVD SETUP Component Connection 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). EMOTE NTROL IN COMPONENT IN HDM 2 2 O 1 2 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the TV. ( 1 ) AUDIO VIDEO 2. How to use ■ ■ ■ ■ Turn on the DVD player, insert a DVD.
( ) ( EXTERNAL EQUIPMENT SETUP S-Video Connection AUDIO 1. How to connect S-VIDEO Connect the S-VIDEO output of the DVD to the S - V I D E O input on the TV. 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. R 2 1 RS-232C IN (CONTROL & SERVICE) 2. How to use ■ ■ Turn on the DVD player, insert a DVD. Select the A V 1 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. ( ) ■ EXTERNAL EQUIPMENT SETUP Antenna Connection 1.
EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect 1 V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) ANT IN S-VIDEO ANT OUT OUTPUT SWITCH L R 2. How to use ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) RS-232C IN (CONTROL & SERVICE) Select the A V 1 input source on the TV using the I N P U T button on the remote control.
OTHER A/V SOURCE SETUP Camcorder Video Game Set 1. How to connect ■ ■ ■ Select the A V 2 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. L R USB HDMI IN 3 SERVUCE ONLY 2. How to use VIDEO EXTERNAL EQUIPMENT SETUP V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. RGB IN VGA (D-Sub 15 pin) Connection AUDIO (RGB/DVI) RGB(PC) ( ) 1. How to connect EXTERNAL EQUIPMENT SETUP 1 COMPONENT IN N Connect the VGA output of the PC to the R G B ( P C) jack on the TV. HDMI/DV 2 2 Y PR PB R L 1 2 A U D I O( Connect the PC audio output to the ( R G B / D V I ) jack on the TV. 1 ) AUDIO VIDEO 1 2.
Supported Display Specifications (RGB-PC, HDMI-PC) ! NOTES Horizontal Frequency(KHz) Vertical Frequency(Hz) G To get the the best picture quality, adjust the PC graphics card to 1360x768. 640x350 31.468 70.09 G 720x400 Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. 31.469 70.08 G 640x480 31.469 37.500 37.861 59.94 75.00 72.80 800x600 35.156 37.879 46.875 48.077 56.25 60.31 75.00 72.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. EXTERNAL EQUIPMENT SETUP PICTURE Screen Enter Move MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config. Position R G • Advanced Control • Reset Screen (RGB-PC) Size Phase Reset 1 MENU 2 Select P I C T U R E. ENTER Select S c r e e n ( R G B - P C ).
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move Screen Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Move MENU Prev. Resolution Auto config. G To Set Position R G • Advanced Control • Reset Screen (RGB-PC) Size Yes No Phase Reset 1 MENU 2 Select P I C T U R E.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase PICTURE Move Screen Enter Move MENU Prev. E EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config.
Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. Move Screen Enter Move MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config. Position R • Advanced Control Initialize Settings. G Yes Size • Reset Screen (RGB-PC) Phase Reset 1 MENU 2 Select S c r e e n ( R G B - P C ). ENTER Select R e s e t.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. RATIO Change the aspect ratio.G p.44 SLEEP Select the amount of time before your TV turns off automatically.G p.72 RATIO POWER SLEEP SOUND Q. MENU MENU PICTURE INPUT WATCHING TV / CHANNEL CONTROL PICTURE Selects the factory preset picture depend on the viewing environment. G p.46 SOUND Selects the factory preset sound for type of program. G p.
THUMBSTICK Navigate the on-screen menus and adjust the system settings to your preference. (Up/Down/Left Right/ENTER) RETURN Allows the user to move return one step in an interactive application or other user interaction function. AV MODE It helps you select and set images and sounds when connecting AV devices. G p.41 VOLUME UP Increase/decrease the sound level. /DOWN FAV Scroll through the programmed Favorite channels. G p.34 MUTE Switch the sound on or off. G p.32 CHANNEL Select available channels.
WATCHING TV / CHANNEL CONTROL TURNING ON TV 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , I N P U T, C H (D or E) button on the TV or press the P O W E R, I N P U T, C H ( 9 ) button on the remote control. or ) , N u m b e r ( 0~9 WATCHING TV / CHANNEL CONTROL 2 Select the viewing source by using the I N P U T button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. ■ ■ Step3. Option Setting Step1. Mode Setting Step1. Mode Setting ! Step3. Option Setting It sets a use environment. Select the set where mode. 1. OSD Language Setting F 2.
WATCHING TV / CHANNEL CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ■ ■ ■ WATCHING TV / CHANNEL CONTROL ■ ■ A s p e c t R a t i o: Selects your desired picture format. P o w e r S a v i n g : Adjusts screen brightness to reduce the power consumption of the TV.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. WATCHING TV / CHANNEL CONTROL CHANNEL Move Enter Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Move Enter Press ‘Yes’ button to begin auto tuning. Yes No 1 MENU 2 ENTER Select C H A N N E L. Select A u t o T u n i n g.
Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Enter DTV F G Select channel type and RF-channel number. Channel 2 DTV 2-1 Bad Normal Good Delete Close 1 MENU 2 Select C H A N N E L. Select M a n u a l T u n i n g.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Channel Editing A channel list can be created by toggling each channel on or off with ENTER button. The channels in the list are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the topright corner of the screen.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. TV ENTER AV2 Component1 Component2 Select the desired input source. TV AV1 HDMI3 AV2 Component1 HDMI2 Component2 HDMI1 ■ ■ ■ ■ ■ RGB-PC T V: Select it to watch over-the-air, cable and digital cable broadcasts. A V 1 - 2: Select them to watch a VCR or other external equipment. C o m p o n e n t 1 - 2 : Select them to watch DVD or a Digital set-top box. R G B - P C: Select it to view PC input.
WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use.
AV MODE You can select the optimal images and sounds. 2RETURN Cinema Game Sport Press the A V M O D E button repeatedly to select the desired source. Return to TV viewing. ■ ■ WATCHING TV / CHANNEL CONTROL 1AV MODE Off C i n e m a” in AV mode, If you select “C C i n e m a will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively. O f f” in AV mode, the If you select “O P i c t u r e M o d e” and “S S o u n d M o d e” “P return to previous selected value.
WATCHING TV / CHANNEL CONTROL This function operates only with devices with the logo. The TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. To start using SIMPLINK, turn it on in the user menus.
SIMPLINK Functions D i r e c t P l a y : After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of the AV devices connected to TV. ■ D i s c p l a y b a c k : Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. ■ P o w e r o f f a l l d e v i c e s : When you power off the TV, all connected devices are turned off.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. ! NOTE G If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by warranty.
Set by program Zoom 1 Selects the proper picture proportion to match the source’s image. Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 (16:9 4:3) 16:9) Zoom 2 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. PICTURE CONTROL Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Q.
Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard 60 • Color 60 • Tint 0 • Contrast E R G • Advanced Control E PICTURE CONTROL 1 MENU Select P I C T U R E. 2 3 ENTER Select P i c t u r e M o d e. ENTER Select V i v i d, S t a n d a r d, C i n e m a, S p o r t, or G a m e.
Picture Mode - Expert Control By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode.
PICTURE CONTROL ADVANCED CONTROL - FILM MODE Set up the TV for the best picture appearance for viewing movies. When you operate Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E • Contrast 50 • Contrast 50 • Brightness 50 • Brightness 50 • Sharpness 50 • Color • Tint i 50 0 R • Sharpness 50 Resetting video configuration... • Color 50 • Tint G • Advanced Control ENTER R G • Reset Screen (RGB-PC) PICTURE CONTROL 2 0 • Advanced Control • Reset Screen (RGB-PC) 1 MENU Enter Select P I C T U R E. Select R e s e t.
PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen still picture from a PC/video game displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
POWER SAVING PICTURE MODE It reduces the plasma display’s power consumption. OPTION Move Language Enter : English Input Label OPTION Move Language Enter : English Input Label SIMPLINK : On SIMPLINK Key Lock : Off Key Lock : Off Caption : Off Caption : Off ISM Method : Normal ISM Method : Normal Power Saving : Level 0 Power Saving : Level 0 Set ID :1 Set ID :1 E : On Level 0 Level 1 Level 2 Level 3 E Level 4 2 3 Select O P T I O N.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 L : Standard SOUND & LANGUAGE CONTROL ENTER 4RETURN MENU 56 Off Clear Voice : On On Balance 0 Enter L : Standard • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O.
CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 AUDIO Enter L : Standard R : Off Clear Voice : On Sound Mode On 0 L R : Standard • SRS TruSurround XT: Off • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset E E Select A U D I O. ENTER Select C l e a r V o i c e. ENTER Select O n or O f f.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are not adjustable. Q.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 L AUDIO Enter : Off Clear Voice : On Balance R : Standard Sound Mode OffTruSurround XT • SRS TruSurround XT:SRS 50 • Treble 50 Treble 50 • Bass 50 • Bass 50 Bass 50 E Select S o u n d M o d e. 6RETURN ENTER Select T r e b l e or B a s s. ENTER MENU Close Make appropriate adjustments. Return to the previous menu.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Enter : Off Auto Volume : Off Clear Voice : On Clear Voice : On L R : Standard Sound Mode • SRS TruSurround XT: Off Close 50 • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL MENU 60 Select A U D I O. Select B a l a n c e.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Move Enter AUDIO Move E E Clear Voice : On Balance Clear Voice 0 Sound Mode L : Standard R : On Balance Sound Mode 0 L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 : On R : Standard • SRS TruSurround XT: Off • Reset TV Speaker Enter • Reset TV Speaker : On Off On 2 Select A U D I O. ENTER Select T V S p e a k e r. ENTER Select O n or O f f.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 SOUND & LANGUAGE CONTROL 4 MENU 62 Balance Sound Mode 0 L • SRS TruSurround XT: Off 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O. Select R e s e t. Initialize the adjusted value. Return to TV viewing. R i Resetting audio configuration...
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.Menu Aspect Ratio 16:9 Power Saving 3 Off Clear Voice Picture Mode Vivid Sound Mode Standard Off Caption Multi Audio CH F English Sleep Timer Off Del/Add/Fav Add G Analog TV 1Q. MENU 2 Digital TV Select S A P.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Move Language Enter : English Input Label SOUND & LANGUAGE CONTROL 2 SIMPLINK : On : Off Key Lock : Off Audio Caption : Off Caption : Off ISM Method : Normal ISM Method : Normal Power Saving : Level 0 Power Saving : Level 0 Set ID :1 Set ID :1 Select O P T I O N. Select A u d i o.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Move Language Enter : English Input Label : English Menu SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Caption : Off Caption : Off ISM Method : Normal ISM Method : Normal Power Saving : Level 0 Power Saving : Level 0 Set ID :1 Set ID :1 Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select M e n u.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter TIME Move Enter Manual Clock : Feb/21/2008/ 2:10 AM Clock F : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 MENU TIME SETTING 2 ENTER Select C l o c k.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Q.Menu Aspect Ratio 16:9 Power Saving 3 Off Clear Voice Picture Mode Vivid Sound Mode Standard Off Caption English Multi Audio Sleep Timer CH Del/Add/Fav Close TIME SETTING 72 1 SLEEP 2RETURN Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0, or 2 4 0 minutes. Return to TV viewing.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Move TIME Move Clock : Feb/21/2008/ 2:10 AM Clock : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off On Time : Off On Time : Off Enter Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : On Enter Off On TV will be automatically turned off, in case of No Signal for 10 minutes. 1 MENU 2 ENTER Select T I M E. Select A u t o S l e e p.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 MENU 2 1 2 3 4 5 6 7 8 9 Enter : Off LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter Off On Select L O C K. Input the password. 0 Select L o c k S y s t e m.
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 MENU 2 1 2 3 4 5 6 7 8 9 Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Select L O C K. Input the password.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU 2 1 2 3 4 5 6 7 8 9 ENTER Block/Unblock Move CH Move Page MENU Previous RETURN Exit Select L O C K. Input the password. 0 Select B l o c k C h a n n e l. 4 ENTER Select a channel to block or unblock.
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - For USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children - For USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL / RATINGS TV Rating General - For USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view.
TV Rating English - For CANADA only Selecting canadian english language rating system. LOCK Move Lock System Enter : Off LOCK Move Lock System Enter Blocking off : Permits all : Off programs Set Password Set Password Block Channel Block Channel TV Rating-English TV Rating-English TV Rating-French TV Rating-French Downloadable Rating Downloadable Rating Input Block Input Block E C C8+ G PG 14+ 18+ Blocking Off 1 MENU 2 1 2 3 4 5 6 7 8 9 ENTER Select L O C K.
PARENTAL CONTROL / RATINGS TV Rating French - For CANADA only Selecting canadian french language rating system.
DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channels. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
MODELS Dimensions (Width x Height x Depth) With stand Weight With stand Without stand Without stand MODELS Dimensions (Width x Height x Depth) With stand Weight With stand Without stand Without stand Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity 50PG20 (50PG20-UA) 50PG20C (50PG20C-UA) 48.2 x 33.4 x 14.3 inches 1224.7 x 849.0 x 364.0 mm 48.2 x 31.1 x 3.
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
(Hexa) Code Function Note 08 POWER Remote control Button (Power On/Off) 45 Q.
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’. G p.97.
APPENDIX Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k a b c d e f g h i j k l k m COMMAND1 COMMAND2 21. Channel Tuning m a DATA (Hexadecimal) 00 ~ 01 (G p.95) (G p.95) 00 ~ 01 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 00 ~ 01 COMMAND1 COMMAND2 14.
01. Power (Command: k a) 06. Volume Control (Command: k f) To control Power On/Off of the TV. To adjust volume. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust volume with the volume buttons on remote control.
APPENDIX 12. OSD Select (Command: k l) 18. ISM Method (Command: j p) To select OSD (On Screen Display) on/off. To avoid having a fixed image remain on screen. Transmission [k][l][ ][Set ID][ ][Data][Cr] Transmission [ j ][p][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: Inversion Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 04: White Wash 02: Orbiter 08: Normal Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 13.
Data 05: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ...