Owners manual

ManualsBrandsLG Electronics ManualsPlasma TV42PG6910

Please read this manual carefully before operating your

TV.

Retain it for future reference.

Record model number and serial number of the TV.

Refer to the label on the back cover and quote this

information.

To your dealer when requiring service.

PLASMA TV

OWNER’S MANUAL

PLASMA TV MODELS

4422PPGG6699

****

5500PPGG6699

****

ENGLISH

Trademark of the DVB Digital Video

Broadcasting Project (1991 to 1996)

IIDD NNuummbbeerr((ss))::

5506: 42PG6900 5508: 50PG6900

5528: 42PG6910 5529: 50PG6910

This product qualifies for ENERGY STAR in the “factory

default (Home mode)” setting and this is the setting in

which power savings will be achieved.

Changing the factory default picture setting or

enabling other features will increase power consump-

tion that could exceed the limits necessary to qualify

for Energy Star rating.

Summary of content (116 pages)

PAGE 1
ENGLISH PLASMA TV OWNER’S MANUAL PLASMA TV MODELS 4 2 P G 6 9* * 5 0 P G 6 9* * Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
PAGE 2
PAGE 3
ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. IN PU D/A T TV/RA INPU DIO T PO BR SIM PLINK TE IG W ER M O D TV E HT DV XT INFO i Power Cord ACCESSORIES Batteries Owner’s Manual This feature is not available for all models. D VC R LIV E TV EX IT BA CK DV TI SH ME IFT R MEN U GU OK VO 1 SUBT 5 6 9 Q.
PAGE 4
CONTENTS ACCESSORIES ............................................. 1 PREPARATION CONTENTS Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 5 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 6 Please set it up carefully so the product does not fall over. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Back Cover for Wire Arrangement . . . . . . . . . . . . . . . .
PAGE 5
TELETEXT Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Special Teletext Functions . . . . . . . . . . . . . . . . . . . . 97 CONTENTS XD - Picture Improvement Technology . . . . . . . . . . . . . 73 XD Demo . . . . . . . . . . . . . . . . . . . .
PAGE 6
PREPARATION HOME MENU This menu is a contents guide. In the Home Menu, you can access the Recorded list of the DVR, Manual Recording of the DVR, Schedule List or the TV Menu. PREPARATION INPUT D/A MODE TV POWER TV/RADIO INPUT Home DVD BRIGHT VCR SIMPLINK TEXT INFO i Free Space LIVE TV This displays the remaining record time for analogue input. (Analog TV, AV1,AV2, AV3) This displays the remaining record time for DTV input. Recorded TV BACK DVR EXIT DVR p.
PAGE 7
FRONT PANEL CONTROLS ■ Image shown may differ from your TV. PREPARATION Remote Control Sensor POWER Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on. INPUT INPUT MENU INPUT MENU INPUT OK MENU OK - VOL + OK MENU - VOL +OK - VOL + PR PR PR VOLUME PROGRAMME Swivel Stand After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
PAGE 8
PREPARATION BACK PANEL INFORMATION ■ Image shown may differ from your TV. 10 PREPARATION 1 2 3 4 5 2 11 6 8 9 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 6 OPTICAL DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. 2 HDMI Input Connect a HDMI signal to HDMI IN.
PAGE 9
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOESN’T FALL OVER. ■ ■ ■ 1 2 1 Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. 2 Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
PAGE 10
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. 1 Connect the cables as necessary. 2 Install the C A B L E M A N A G E M E N T C L I P as shown. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. PREPARATION 42PG69** 50PG69** Fix the C a b l e H o l d e r as shown and bundle the cables.
PAGE 11
■ ■ The TV can be installed in various ways such as on a wall or on a desktop etc. The TV is designed to be mounted horizontally. EARTHING Power Supply Ensure that you connect the earth wire to prevent possible electric shock. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. DESKTOP PEDESTAL INSTALLATION For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
PAGE 12
PREPARATION ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
PAGE 13
EXTERNAL EQUIPMENT SETUP ■ ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV. HD RECEIVER SETUP ■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
PAGE 14
EXTERNAL EQUIPMENT SETUP Connecting a set-top box with an HDMI cable EXTERNAL EQUIPMENT SETUP 1 Connect the digital set-top box to H D M I / D V I I N 1 , H D M I I N 2 or H D M I I N 3 jack on the TV. 2 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 3 Select H D M I 1, H D M I 2 or H D M I 3 input source using the I N P U T button on the remote control.
PAGE 15
DVD SETUP Connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. 3 Turn on the DVD player, insert a DVD. 2 4 Select C o m p o n e n t input source using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
PAGE 16
EXTERNAL EQUIPMENT SETUP Connecting with a Euro Scart cable EXTERNAL EQUIPMENT SETUP 1 Connect the Euro scart socket of the DVD to the A V 1 Euro scart socket on the TV. 2 Turn on the DVD player, insert a DVD. 3 Select A V 1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select A V 2 input source. 4 1 Refer to the DVD player's manual for operating instructions.
PAGE 17
Connecting the HDMI cable Connect the HDMI output of the DVD to the H D M I / D V I I N 1 , H D M I I N 2 or H D M I I N 3 jack on the TV. 2 Select H D M I 1, H D M I 2 or H D M I 3 input source using the I N P U T button on the remote control. 3 Refer to the DVD player's manual for operating instructions. EXTERNAL EQUIPMENT SETUP 1 1 ! NOTE G G The TV can receive video and audio signals simultaneously when using a HDMI cable.
PAGE 18
EXTERNAL EQUIPMENT SETUP VCR SETUP ■ ■ To avoid picture noise (interference), allow adequate distance between the VCR and TV. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible. Connecting with a RF cable ANT OUT EXTERNAL EQUIPMENT SETUP 16 S-VIDEO VIDEO L R AUDIO 1 ANT IN 2 OUTPUT SWITCH Wall Jack Antenna 1 Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
PAGE 19
Connecting with a Euro Scart AUDIO Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select A V 1 input source using the I N P U T button on the remote control. 4 If connected to A V 2 Euro scart socket, select A V 2 input source. 1 (R) AUDIO (L) AUDIO/ VIDEO ! NOTE EXTERNAL EQUIPMENT SETUP 1 Any Euro Scart cable used must be signal shielded.
PAGE 20
EXTERNAL EQUIPMENT SETUP Connecting with a S-Video cable 1 AUDIO 2 Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV. The picture quality is improved; compared to normal composite (RCA cable) input. VIDEO EXTERNAL EQUIPMENT SETUP Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 4 Select A V 3 input source using the I N P U T button on the remote control.
PAGE 21
OTHER A/V SOURCE SETUP Camcorder Video Game Set L R 1 1 V I D E O jacks between TV and external equipment. Match the jack colours. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select A V 3 input source using the I N P U T button on the remote control. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
PAGE 22
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable EXTERNAL EQUIPMENT SETUP 1 Connect the RGB output of the PC to the R G B I N ( P C) jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 3 Turn on the PC and the TV. 4 Select R G B input source using the I N P U T button on the remote control.
PAGE 23
! NOTE G To G If using a sound card, adjust PC sound as required. TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. G DDC protocol is preset for RGB (Analogue RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality.
PAGE 24
EXTERNAL EQUIPMENT SETUP Supported Display Resolution RGB[PC] / HDMI[PC] mode Resolution 720x400 640x480 EXTERNAL EQUIPMENT SETUP 22 800x600 832x624 1024x768 1280x768 1360x768 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.468 31.469 37.500 37.879 46.875 49.725 48.363 56.470 60.023 47.693 47.649 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.03 59.99 59.94 HDMI[DTV] mode Resolution 640x480 720x480 720x576 1280x720 1920x1080 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.469 31.
PAGE 25
Screen Setup for PC mode BACK Auto Configure (RGB [PC] mode only) DVR MENU EXIT Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. GUIDE OK TIME SHIFT TIME SHIFT MARK FAV PR EXTERNAL EQUIPMENT SETUP VOL Auto configure This function is for automatic adjustment of the screen position, clock, and phase.
PAGE 26
EXTERNAL EQUIPMENT SETUP BACK DVR MENU EXIT GUIDE Adjustment for screen Phase, Clock, Position OK TIME SHIFT If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. TIME SHIFT MARK FAV VOL To correct the screen size, adjust C l o c k. EXTERNAL EQUIPMENT SETUP 24 PR This function works in the following mode : RGB[PC].
PAGE 27
Selecting Wide XGA mode BACK DVR MENU EXIT To view a normal picture, match the resolution of RGB mode and selection of XGA mode OK TIME SHIFT This function works in the following mode: RGB[PC] mode GUIDE TIME SHIFT MARK FAV VOL 2 Press the G button and then use D or E button to select X G A M o d e. 3 Press the G button and then use D or E button to select the desired XGA resolution. 4 SETUPO Auto Config. PICTUREO Manual Config.
PAGE 28
EXTERNAL EQUIPMENT SETUP BACK Initialising (Reset to original factory settings) MENU DVR EXIT GUIDE OK TIME SHIFT TIME SHIFT This function operates in current mode. To initialise the adjusted value MARK FAV VOL PR MUTE EXTERNAL EQUIPMENT SETUP 1 2 Press the MENU button and then select the O P T I O N menu. D or E button to Press the G button and then D or E button to select F a c t o r y M o d e. 3 Press the G button and then D or E button to select F a c t o r y R e s e t.
PAGE 29
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD POWER Switches the TV on from standby or off to standby. D/A INPUT Selects digital or analogue mode. Switches the TV on from standby. BRIGHT VCR INFO i SIMPLINK TEXT TV/RADIO Selects Radio or TV channel in digital mode. LIVE TV INPUT External input mode rotate in regular sequence. Switches the TV on from standby.
PAGE 30
WATCHING TV /PROGRAMME CONTROL MODE Selects the remote operating modes. INPUT D/A POWER TV/RADIO INPUT See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. MODE TV DVD TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 BRIGHT VCR INFO i SIMPLINK TEXT INFO i LIVE TV 1 Shows the present screen information.
PAGE 31
TURNING ON THE TV - When your TV is turned on, you will be able to use its features. INPUT D/A 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. TV/RADIO INPUT DVD BRIGHT VCR INFO i SIMPLINK TEXT 2 MODE TV POWER LIVE TV BACK DVR EXIT MENU GUIDE Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Select Mode, Country, Time Zone, Auto programme tuning. Note: a.
PAGE 32
WATCHING TV /PROGRAMME CONTROL PROGRAMME SELECTION 1 Press the P R + or - or NUMBER buttons to select a programme number. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD BRIGHT VCR INFO i SIMPLINK TEXT WATCHING TV / PROGRAMME CONTROL VOLUME ADJUSTMENT BACK EXIT MENU GUIDE OK TIME SHIFT 1 DVR LIVE TV TIME SHIFT Press the VOL + or - button to adjust the volume. If you wish to switch the sound off, press the MUTE button.
PAGE 33
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 1 Press the M E N U button and then D or E button to display each menu. 2 Press the G button and then D or E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F or G button. You can move to a higher level menu by pressing the O K or M E N U button. SETUPO Picture Mode G Colour Temperature Move MENU Prev.
PAGE 34
WATCHING TV /PROGRAMME CONTROL AUTO PROGRAMME TUNING (IN DIGITAL MODE) BACK MENU DVR EXIT Use this to automatically find and store all available programmes. GUIDE OK TIME SHIFT TIME SHIFT When you start auto programming in digital mode, all previously stored service information will be deleted. MARK FAV It is not possible to use this function while recording a programme. WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the S E T U P menu.
PAGE 35
MANUAL PROGRAMME TUNING (IN DIGITAL MODE) BACK DVR MENU EXIT Manual Tuning lets you manually add a programme to your programme list. GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 2 Press the G button and then D or E button to select M a n u a l T u n i n g.
PAGE 36
WATCHING TV /PROGRAMME CONTROL PROGRAMME EDIT (IN DIGITAL MODE) BACK When a programme number is skipped, it means that you will be unable to select it using PR + or - button during TV viewing. DVR MENU EXIT If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. GUIDE OK TIME SHIFT TIME SHIFT MARK This function enables you to skip the stored programmes.
PAGE 37
Mini Glossary Displayed with a DTV Programme. A TEXT Displayed with a Teletext Programme. Displayed with a Locked Programme. Displayed with a Subtitle Programme. Displayed with a Radio Programme. Displayed with an Scramble Programme. Displayed with a MHEG Programme. Displayed with a Dolby Programme. Skipping a programme number Select a programme number to be skipped with the D or E or F or G button. 2 Press the BLUE button. The skipped programme number turns to blue.
PAGE 38
WATCHING TV /PROGRAMME CONTROL 5V ANTENNA POWER (IN DIGITAL MODE ONLY) BACK DVR EXIT Even if there is not a special 5V adapter power in the external antenna, this function can output 5V in the TV. MENU GUIDE OK TIME SHIFT TIME SHIFT MARK WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the S E T U P menu. 2 Press the G button and then use D or E button to select 5 V A n t e n n a P o w e r.
PAGE 39
SOFTWARE UPDATE (IN DIGITAL MODE ONLY) BACK DVR EXIT Software Update means software can be downloaded through the digital terrestrial broadcasting system. After a Software Update, HDD formatting may be necessary. In this case, the HDD Failure message is displayed in the DVR Home menu. MENU GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 Press the MENU button and then select the S E T U P menu. 2 Press the G button and then S o f t w a r e u p d a t e.
PAGE 40
WATCHING TV /PROGRAMME CONTROL DIAGNOSTICS (IN DIGITAL MODE ONLY) BACK This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. WATCHING TV / PROGRAMME CONTROL Press the M E N U button and then D or E button to select the S E T U P menu. 2 Press the G button and then use D or E button to select D i a g n o s t i c s. Press the G button to display Manufacturer, Model/Type, Serial Number and Software Version.
PAGE 41
CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY) BACK DVR MENU EXIT This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction.
PAGE 42
WATCHING TV /PROGRAMME CONTROL BACK AUTO PROGRAMME TUNING (IN ANALOGUE MODE) DVR MENU EXIT OK TIME SHIFT All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV. GUIDE TIME SHIFT MARK FAV VOL It is not possible to use this function while recording a programme. PR MUTE WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then D or E button to select the S E T U P menu.
PAGE 43
BACK MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) DVR GUIDE OK TIME SHIFT Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. FAV VOL It is not possible to use this function while recording a programme. 2 Press the G button and then D or E button to select M a n u a l T u n i n g. 3 Press the G button to select S t o r a g e. PR MUTE 1 2 3 4 5 6 7 8 9 LIST 0 Q.
PAGE 44
WATCHING TV /PROGRAMME CONTROL FINE TUNING (IN ANALOGUE MODE) BACK Normally fine tuning is only necessary if reception is poor. GUIDE OK TIME SHIFT 1 MENU DVR EXIT Press the MENU button and then D or E button to select the S E T U P menu. TIME SHIFT MARK FAV VOL PR WATCHING TV / PROGRAMME CONTROL 2 Press the G button and then D or E button to select M a n u a l T u n i n g. 3 Press the G button and then D or E button to select F i n e.
PAGE 45
PROGRAMME EDIT (IN ANALOGUE MODE) BACK This function enables you to delete or skip stored programmes. You can also move some programmes to other programme numbers or copy blank programme data into a selected programme number. DVR MENU EXIT GUIDE OK TIME SHIFT TIME SHIFT It is not possible to use this function while recording a programme. SETUPG Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Press the MENU button and then D or E button to select the S E T U P menu.
PAGE 46
WATCHING TV /PROGRAMME CONTROL MARK FAV VOL PR MUTE BACK DVR MENU EXIT TIME SHIFT A GUIDE OK TIME SHIFT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW Moving a programme WATCHING TV / PROGRAMME CONTROL a Select a programme to be moved with D or E or F or G button. b Press the YELLOW button. c Move the programme to the desired programme number with the D or E or F or G button. d Press the YELLOW button again to release this function.
PAGE 47
EXIT SELECTING THE PROGRAMME TABLE GUIDE OK TIME SHIFT TIME SHIFT MARK You can check which programmes are stored in the memory by displaying the programme table. FAV VOL PR U A 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW Displaying programme LIST Press the LIST button to display the PROGRAMME LIST menu. DTV List D 801 YLE TV1 The programme list appears on the screen. 802 YLE TV2 803 YLE FST • You may find some blue programmes.
PAGE 48
WATCHING TV /PROGRAMME CONTROL INPUT SOURCE SELECTION BACK DVR MENU EXIT Selects a label for each input source which is not in use. GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL WATCHING TV / PROGRAMME CONTROL 1 PR SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTION G SIMPLINK SCREENO Factory Mode Press the M E N U button and then use D or E button to select the OPTION menu.
PAGE 49
FUNCTION BACK DVR MENU EXIT This fundtion operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. GUIDE OK TIME SHIFT This TV might not function properly when using it with other products with HDMI-CEC function. TIME SHIFT MARK FAV VOL PR This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. SIMPLINK function is not supported by HDMI IN 3 input.
PAGE 50
WATCHING TV /PROGRAMME CONTROL SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, OK, buttons. , , , , , and Direct play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off.
PAGE 51
DVR (DIGITAL VIDEO RECORDER) TIMESHIFT MODE (PAUSE & REPLAY OF LIVE TV) BACK DVR EXIT This function allows the unit to automatically record live TV and make it available for viewing at any time. 1 OK FAV VOL PR Move MENU G Prev. 1 3 4 Press the G button and then use D / E button to select O n or O f f. Press the EXIT button to return to normal TV viewing.
PAGE 52
DVR (DIGITAL VIDEO RECORDER) Using the TimeShift Mode function LIVE 1 1 2 3 4 The ‘Progress Bar’? After selecting TimeShift Mode On, press the O K button. This function indicates what DVR reviewing is possible,a current on-screen and live broadcasting ■ DVR (DIGITAL VIDEO RECORDER) As soon as TimeShift Mode starts, a progress bar indicating the current recording status is displayed in the bottom of the screen.
PAGE 53
VCR SIMPLINK TEXT INFO i LIVE TV Using the TimeShift Mode function, play When in TimeShift Mode, the following options are available. DELAYED BACK DVR Indicates that the current broadcast and displayed video differ. GUIDE OK TIME SHIFT Play MENU EXIT TIME SHIFT Pause MARK Using the remote control You can shift playback to any point within the recorded programme. FF or GG repeatedly, press the R E W( FF) button to speed up F -> FF -> FFF -> FFFF -> FFFFF .
PAGE 54
DVR (DIGITAL VIDEO RECORDER) INSTANT RECORDING Use this function to record the programme you are watching on the main screen (Analogue or Digital broadcast). Instant Record This function records the currently displayed programme. DVR (DIGITAL VIDEO RECORDER) 1 Select the programme you wish to record and then press the O button. REC During recording is displayed. Use this feature to record up to 2 hours of programming. 2 If you wish to stop recording, press the A button.
PAGE 55
The extra recording time added to the existing setting equals the final recording time. Recording Options Cricket World Cup 23:40~00:40 4 After adjusting the recording time, select O K. The Status bar will be displayed. Total recording duration REC 0:00:00 / 2:00:00 23:57 Recording time 23:54~01:55 (2 min recorded) Set duration F OK No change G Cancel 3 Elapsed recording time ■ Recording stops when the selected duration is reached or when you press the A button.
PAGE 56
DVR (DIGITAL VIDEO RECORDER) ! NOTE DVR (DIGITAL VIDEO RECORDER) When recording, if the available storage space is not sufficient, the recording will automatically Stop. In Radio mode, recordings of less than 30 seconds will not be saved. In other modes, recordings of less than 10 seconds will not be saved. No data will be saved on paid channels with no CI Card or expired period of validity of CI Card, in invalid services and in data only channels (ex. MHEG) In order to save disk space.
PAGE 57
MANUAL RECORDING BACK DVR MENU EXIT GUIDE This function is used to perform reserved recording. OK TIME SHIFT This function is available in the DVR menu. When Manual Recording,the default sound of the TV is stored. TIME SHIFT MARK FAV VOL PR Home 1 Press the D V R button to display H o m e menu. Use the D or E button to select the M a n u a l R e c o r d and then use the O K or G button.
PAGE 58
DVR (DIGITAL VIDEO RECORDER) RECORDED TV PROGRAMME LIST BACK You can view the recorded programme list at a glance. This function is also available in the DVR menu. Information function is only applicable when the country selected is UK. 1 MENU DVR EXIT GUIDE OK TIME SHIFT Press the D V R button to display H O M E menu. Use the D or E button to select Recorded TV and then use the O K or G button.
PAGE 59
BACK MENU DVR EXIT GUIDE Recorded programme Selection and Popup Menu OK TIME SHIFT TIME SHIFT The preview recorded list is shown above. MARK FAV VOL PR Recorded TV 1 2 Use the PR + or PR - button for page up/down navigation.
PAGE 60
DVR (DIGITAL VIDEO RECORDER) Playing recorded programmes - You can play a selected programme from the recorded programme list. The ‘Progress Bar’? 1 Play a recorded programme. 2 While playing, You will see a playback screen as shown below. ■ Initially, an icon showing the current playback mode is displayed PLAYING . Press the O K button to display the progress bar ■ To stop displaying the recorded programmes icon, press the E X I T button.
PAGE 61
Chase playback During recording, you can “Trick play” a programme that is being recorded without interrupting recording by using the Progress Bar. The ‘Progress Bar’? 1 Record a programme. 2 While recording, You will see a playback screen as shown below. ■ Initially, an icon showing the current playback mode is displayed REC . Press the O K button to display the progress bar ■ To stop displaying the recorded programmes icon, press the E X I T button.
PAGE 62
DVR (DIGITAL VIDEO RECORDER) SCHEDULE LIST BACK MENU DVR EXIT This function is used to show scheduled recordings. This function is available in the DVR menu. GUIDE OK TIME SHIFT TIME SHIFT You can store up to 30 programmes. 60 programmes can be stored in the United Kingdom. MARK FAV Home Free Space 1 Press the D V R button to display H o m e menu. Use the D or E button to select the Schedule List and then use the O K or G button.
PAGE 63
RECORD QUALITY BACK This function is not available while a recording is taking place. (Only for analogue schedule recording) DVR MENU EXIT GUIDE OK TIME SHIFT TIME SHIFT MARK FAV Press the M E N U button and then use D / E button to select the D V R menu. 2 Press the G button and then use D / E button to select Record Quality. DVR Move 3 4 Press the G button and then use D / E button to select H i g h or Normal. Press the EXIT button to return to normal TV viewing. MENU G Prev.
PAGE 64
DVR (DIGITAL VIDEO RECORDER) FORMAT HARD DISK BACK DVR MENU EXIT Erases all programmes and initialises the hard drive. GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL DVR (DIGITAL VIDEO RECORDER) 1 Press the M E N U button and then use D / E button to select the D V R menu. 2 Press the G button and then use D / E button to select HDD Format. 3 Press the G button to start HDD Format.
PAGE 65
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
PAGE 66
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in 8 Days Guide Mode Programme Guide Remote Control Buttons RED GREEN YELLOW BLUE F or G or E PR + or GUIDE/EXIT TV/RADIO INFO i FAV D FF GG EPG (ELECTRONIC PROGRAMME GUIDE) IFF GGI RECORD Icon (Blue colour) (Red colour) Function Change EPG mode Enter Date setting mode Enter Manual Record setting mode Enter Schedule list mode Display Popup window Select NOW or NEXT Programme Select the Broadcast Programme Page Up/Down Switch off EPG S
PAGE 67
Button Function in Date Change Mode Remote Control Buttons Function GREEN Switch off Date setting mode Change to the selected date Select a date F or G Switch off Date setting mode E GUIDE/EXIT Switch off EPG Programme Guide 1 BBC ONE Today 08:25 26 Mar 08:00 26 Mar 08:30 09:00 Don’... Breakfast 1 BBC ONE 2 BBC TWO 7 BBC THREE 70 CBBC Channel Dogstar 80 BBC NEWS 24 Breakfast Cramp... Chuck... To... Number ja... Nina a... Lu... This is BBC THREE 105 BBCi Young Dracula Class TV:...
PAGE 68
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Record Popup * You can set up and activate the Record Series only when the country is set to the UK. * You cannot activate a reminder during power off mode. Remote Control Buttons Function EXIT/BACK Delete the pop-up. Move the highlighted field. D or E Follow the order of functions of the selected button. Popup Menu Record series Record programme Watch this pro.
PAGE 69
PICTURE CONTROL EXIT PICTURE SIZE (ASPECT RATIO) CONTROL GUIDE OK TIME SHIFT You can watch the screen in various picture formats; 1 6 : 9, O r i g i n a l, 4 : 3, 1 4 : 9 and Z o o m 1 / 2. TIME SHIFT MARK FAV VOL If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using D or E PR MUTE button. This function works in the following signal. 1 2 3 4 5 6 7 8 9 LIST 0 Q.
PAGE 70
PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ration, grey bars will appear on both the left and right of the screen. • Zoom1 The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. 4:3 Zoom1 • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode.
PAGE 71
PRESET PICTURE SETTINGS BACK DVR MENU EXIT GUIDE Picture Mode-Preset V i v i d Select this option to display a sharp image. Standard The most general and natural screen display status. Cinema Select this option to display a mild image. User 1/2 Select this option to use a user defined setting. 1 FAV VOL 3 Press the G button and then D or E button to select V i v i d, S t a n d a r d, C i n e m a, U s e r 1, or U s e r 2. 4 Press the EXIT button to return to normal TV viewing.
PAGE 72
PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) BACK To initialise values (reset to default settings), select the Cool option. DVR MENU EXIT OK TIME SHIFT Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. GUIDE TIME SHIFT MARK FAV VOL PR This menu is activated after selecting U s e r 1 or U s e r 2 in the P i c t u r e M o d e.
PAGE 73
MANUAL PICTURE ADJUSTMENT BACK DVR MENU EXIT GUIDE Picture Mode-User option Contrast Brightness Colour Sharpness Tint OK TIME SHIFT Adjusts the difference between light and dark levels in the picture. Increases or decreases the amount of white in the picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
PAGE 74
PICTURE CONTROL BACK DVR MENU EXIT Colour Tone - User option GUIDE OK TIME SHIFT To adjust red, green, blue to any colour temperature you prefer. TIME SHIFT MARK FAV VOL PR SETUPO Picture Mode G Colour Temperature PICTURE AUDIOO 1 Press the M E N U button and then D or E button to select the P I C T U R E menu. TIMEO OPTIONO Advanced Picture Reset Demo SCREENO D V RO 2 Press the G button and then D or E button to select C o l o u r T e m p e r a t u r e. Move MENU Prev.
PAGE 75
XD - PICTURE IMPROVEMENT TECHNOLOGY BACK XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. DVR MENU EXIT GUIDE OK TIME SHIFT TIME SHIFT It is not possible to use this function in RGB-PC mode. MARK FAV 1 Press the MENU button and then D or E button to select the P I C T U R E menu. 2 Press the G button and then D or E button to select X D.
PAGE 76
PICTURE CONTROL DEMO BACK DVR MENU EXIT GUIDE Use it to see the difference between XD Demo on and XD Demo off. OK TIME SHIFT TIME SHIFT It is not possible to use this function in RGB[PC],HDMI[PC] mode. MARK FAV VOL 1 PR SETUPO Picture Mode G Colour Temperature PICTURE Press the MENU button and then D or E button to select the P I C T U R E menu. AUDIOO TIMEO OPTIONO Advanced Picture Reset Demo SCREENO D V RO 2 Press the MENU button and then D or E button to select XD Demo.
PAGE 77
ADVANCED - CINEMA BACK DVR MENU EXIT GUIDE To set the TV up for the best picture quality for viewing films. OK TIME SHIFT TIME SHIFT This feature operates only in TV, AV, S-Video and Component 480i/576i mode. MARK FAV It is not possible to use this function while playing a recorded programme. VOL PR SETUPO Picture Mode G Colour Temperature PICTURE 1 Press the M E N U button and then D or E button to select AUDIOO Advanced Picture Reset OPTIONO Demo SCREENO TIMEO the P I C T U R E menu.
PAGE 78
PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL BACK DVR MENU EXIT When you view a film this function adjusts the TV to best picture quality. Adjusting the contrast and the brightness of the screen using the black level of the screen. GUIDE OK TIME SHIFT This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI.
PAGE 79
PICTURE RESET BACK DVR MENU EXIT GUIDE Returns to the default factory setting for Picture Mode, Colour, Temperature, XD and Advanced. OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 PR SETUPO Picture Mode G Colour Temperature PICTURE Press the M E N U button and then D or E button to select the P I C T U R E menu. AUDIOO TIMEO OPTIONO Advanced Picture Reset Demo SCREENO D V RO 2 Press the G button and then D or E button to select P i c t u r e R e s e t. Move MENU Prev.
PAGE 80
PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD BACK MENU DVR EXIT A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL White wash White wash removes permanent images from the screen.
PAGE 81
LOW-POWER PICTURE MODE BACK MENU DVR EXIT This function allows you to reduce the power consumption of the TV. GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 Press the MENU button and then select the O P T I O N menu. D or E Press the G button and then D or E button to select L o w P o w e r. 4 Press the G button and then F or G button to select O f f or O n. Press the EXIT button to return to normal TV viewing. D V RO Move MENU Prev.
PAGE 82
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER BACK DVR EXIT AVL automatically remains on the same level of volume if you change programmes. MENU GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 Press the MENU button and then select the A U D I O menu. 2 Press the G button and then D or E button to select A u t o V o l u m e. 3 Press the G button and then D or E button to select O f f or O n.
PAGE 83
PRESET SOUND SETTINGS-SOUND MODE BACK DVR EXIT You can select your preferred sound setting; Surround MAX, Standard, Music, Cinema or Sport and you can also adjust the frequency of the equalizer. FAV VOL 2 Press the G button and then D or S o u n d M o d e. 3 Press the G button and then D or E button to select S u r r o u n d M A X, S t a n d a r d, M u s i c, C i n e m a, S p o r t or U s e r. 4 Press the E X I T button to return to normal TV viewing. E E 0 SCREENO D V RO Move MENU Prev.
PAGE 84
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE BACK DVR EXIT Adjusting the audio equalizer. MENU GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 Press the M E N U button and then D or the A U D I O menu. E PR SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio Out OPTIONO button to select 0 SCREENO D V RO 2 Press the G button and then D or S o u n d M o d e. E button to select Move MENU Prev.
PAGE 85
BALANCE BACK DVR EXIT You can adjust the sound balance of the speakers to preferred levels. MENU GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 Press the MENU button and then select the A U D I O menu. 2 Press the G button and then B a l a n c e. D 3 Press the G button and then desired adjustment. F 4 Press the EXIT button to return to normal TV viewing.
PAGE 86
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP BACK DVR EXIT You can adjust the internal speaker status. MENU GUIDE OK TIME SHIFT In A V 1 , A V 2 , A V 3 , C O M P O N E N T , R G B and H D M I with H D M I to D V I cable, the TV speaker can be operational even when there is no video signal. TIME SHIFT MARK FAV VOL PR If you wish to use an external hi-fi system, turn off the TV internal speakers. 1 Press the MENU button and then select the A U D I O menu.
PAGE 87
SELECTING DIGITAL AUDIO OUT BACK DVR MENU EXIT This function allows you to select your preferred Digital Audio Output. The TV can only output Dolby Digital if a channel is broadcast with Dolby Digital Audio. When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to Dolby Digital. If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM.
PAGE 88
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. On Screen Display Mono MONO Stereo STEREO Dual DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the clarity of sound is improved. To switch back to stereo, press the I/I I button twice.
PAGE 89
NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received by pressing the I/II button repeatedly. 1 When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
PAGE 90
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. Press the D or E or F or G button and then, O K button to select your desired language. 1 2 Press the D or E button and then, O K button to select your country.
PAGE 91
BACK DVR MENU EXIT LANGUAGE SELECTION (IN DIGITAL MODE ONLY) GUIDE OK TIME SHIFT The A u d i o function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. MARK FAV VOL Use the S u b t i t l e function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
PAGE 92
TIME SETTING CLOCK SETUP BACK DVR MENU EXIT The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 Press the MENU button and then select the T I M E menu. 2 Press the G button and then D or E button to select C l o c k.
PAGE 93
AUTO ON/OFF TIMER SETTING BACK The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the On time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On time function to work.
PAGE 94
TIME SETTING AUTO SHUT-OFF SETTING BACK DVR EXIT If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes. MENU GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 Press the MENU button and then select the T I M E menu. 2 Press the G button and then D or E button to select A u t o S l e e p. 3 Press the G button and then D or E button to select O f f or O n.
PAGE 95
BACK TIME ZONE SETUP When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. 1 DVR MENU EXIT Press the MENU button and then select the T I M E menu. D or E GUIDE OK TIME SHIFT TIME SHIFT MARK UPDATE INDEX TIME SLEEP HOLD REVEAL SUBTITLE RATIO I/II button to 2 Press the G button and then T i m e Z o n e.
PAGE 96
PARENTAL CONTROL / RATINGS BACK DVR MENU EXIT SET PASSWORD & LOCK SYSTEM GUIDE OK TIME SHIFT Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. TIME SHIFT MARK FAV VOL PR MUTE 1 Press the MENU button and then select the O P T I O N menu. 2 Press the G button and then D or E button to select L o c k S y s t e m. 3 Press the O n. G D or E 2 3 4 5 6 7 8 9 LIST 0 Q.
PAGE 97
INPUT D/A PARENTAL CONTROL This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. This allows you to set up blocking schemes to block specific channels and ratings. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. Recording and TimeShift Mode can be accessed even when locked or rated.
PAGE 98
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
PAGE 99
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
PAGE 100
DIGITAL TELETEXT *This function works in UK only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button. If the digital teletext service or the digital teletext only service is on, then Trick Play is not supported.
PAGE 101
APPENDIX TROUBLESHOOTING The TV does not operate properly Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: DVD, VCR etc. A Install new batteries.
PAGE 102
APPENDIX The audio function does not work. Press the VOL + or - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Picture OK & No sound A A A No output from one of the speakers A Adjust B a l a n c e in menu option. Unusual sound from inside the TV A A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
PAGE 103
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
PAGE 104
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions with stand (Width x Height x Depth) without stand Weight with stand without stand Power Requirement Power Consumption Television System 42PG6900-ZC/ 42PG6900-ZF 42PG6910-ZF 50PG6900-ZC/ 50PG6900-ZF 50PG6910-ZF 1044.4 x 735.4 x 308.0 mm 41.1 x 29.0 x 12.2 inches 1235.6 x 849.3 x 364.1 mm 48.7 x 33.5 x 14.4 inches 1044.4 x 680.6 x 79.6 mm 41.1 x 26.8 x 3.2 inches 1235.6 x 792.8 x 79.6 mm 48.7 x 31.3 x 3.2 inches 28 kg / 61.7 lbs 25 kg / 55.
PAGE 105
PROGRAMMING THE REMOTE CONTROL The remote control is a multi brand or universal remote. It can be programmed. to operate most remote controlled devices from other manufacturers. Note that the remote control may not control all models from other brands. Programming a code into a remote mode 1 Testing your remote control.
PAGE 106
APPENDIX VCR Brand AIWA AKAI APPENDIX 104 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Brand MAGNAVOX 031 06
PAGE 107
IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
PAGE 108
APPENDIX Code (Hexa) APPENDIX 106 00 01 02 03 40 41 06 07 08 09 10 11 12 13 14 15 16 17 18 19 0B AA AB 56 5B 1E 1A 50 F0 7E E0 E1 0A 0E 43 44 53 20 2A 26 28 62 70 65 61 63 71 72 79 B0 BA B2 B3 8F 8E B1 BD 7C 9E Function PR + PR VOL + VOL Up (D) Down (E) Right (G) Left (F) POWER MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 INPUT INFO i GUIDE SUBTITLE EXIT FAV Q.
PAGE 109
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C connection cables are not supplied with the TV. Type of Connector; D-Sub 9-Pin Male No.
PAGE 110
APPENDIX Set ID BACK MENU DVR EXIT Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p .112 GUIDE OK TIME SHIFT TIME SHIFT MARK FAV VOL 1 PR SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTION G SIMPLINK SCREENO Factory Mode Press the M E N U button and then use D or E button to select the OPTION menu. D V RO 2 Press the G button and then use D or E button to select Factory Mode. Move MENU Prev.
PAGE 111
Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits A Parity : None Stop bit : 1 bit Communication code : ASCII code A Use a crossed (null modem) cable. A A A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) k k k k k k k k k k k k k k k k k k j j j j j m m x a c d e f g h i j k l m t u v w $ z p q r s u a c b 00 ~ 01 Refer to p.
PAGE 112
APPENDIX 01. Power (Command 2 : a) 04. Volume Mute (Command 2 : e) G To control Power On/Off of the TV. G To control volume mute on/off. Transmission You can also adjust mute using the MUTE button on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [k][e][ ][Set ID][ ][Data][Cr] G To show Power On/Off.
PAGE 113
08. Colour (Command 2 : i) 13. Balance (Command 2 : t) G To adjust the screen colour. G To adjust balance. You can also adjust colour in the PICTURE menu. Transmission You can also adjust balance in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 112. Ack Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 112.
PAGE 114
APPENDIX 18. Abnormal State (Command 2 : z) G To recognize an abnormal state. 20. Low Power (Command 1 : j, Command 2 : q) G To reduce the power consumption of the TV. You can Transmission also adjust Low Power in OPTION menu.
PAGE 115
23. Auto Configure (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] 26. Input select (Command 1 : x, Command 2 : b) G To select input source. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 24.
PAGE 116