User’s Guide Specification In charger Creator Adviser Approver Woo Mi-ra Shin Hye-jung Kim Jong-ok 22/03/12 22/03/12 DD/MM/YY 22/03/12 1. Model Description Model PM97-Z Brand LG Part number Suffix MP(EK Suffix) Product name 42/50PM47, 50/60PM67, 50/60PM68, 50/60PM97 MFL67377801 (1203-REV01) 2. Printing Specification 1. Trim Size (Format) : 182 mm x 257 mm 2. Printing Colors Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3.
Pagination sheet Total pages : 40 pages Front Cover (ENG) P/No. Back Cover (ENG) 2 ... ... ... ...
OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PM47** PM67** PM68** PM97** P/NO : MFL67377801 (1203-REV01) Printed in Korea www.lg.
2 TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 LICENSES 33 MAINTENANCE 3 OPEN SOURCE SOFTWARE NOTICE 33 33 33 Cleaning your TV - Screen, frame, cabinet and stand - Power cord 4 SAFETY INSTRUCTIONS 10 - Viewing 3D Imaging (Only 3D models) 33 TROUBLESHOOTING 12 INSTALLATION PROCEDURE 34 EXTERNAL CONTROL DEVICE SETUP 12 ASSEMBLING AND PREPARING 34 SPECIFICATIONS 12 15 16 17 18 18 20 21 22 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV -
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
4 SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS y Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Des icca nt y Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
6 SAFETY INSTRUCTIONS ENGLISH ENG Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service center for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local yy service centre.
SAFETY INSTRUCTIONS Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to yy keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. yy Also avoid places where there is vibration or where the product cannot be fully supported.
8 SAFETY INSTRUCTIONS ENGLISH ENG Do not turn the product On/Off by plugging-in or unplugging the power plug to the yy wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from yy overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS Contact the service center once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10 SAFETY INSTRUCTIONS ENGLISH ENG Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS 11 Viewing Environment � Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. � Viewing Position -- Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you may not be able to view 3D contents properly. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENERGY AV MODE INPUT TV SAVING 1 4 7 LIST 2 5 3 9 0 FLASHBK 3D 6 LIST 8 9 0 FLASHBK MARK Magic Remote Control, Batteries (AA) (Only 50/60PM97**) (See p. 30) FAV P A G E 3D CH P A G E MUTE Remote Control, Batteries (AAA) (See p. 29) Q.MENU ENTER BACK 3 5 VOL CH MUTE MENU INFO 2 4 7 6 8 MARK FAV VOL 1 EXIT L/R SELECT FREEZE RATIO MENU INFO P Q.
14 ASSEMBLING AND PREPARING ENGLISH ENG NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade yy of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
ASSEMBLING AND PREPARING 15 Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
16 ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons Screen HDD IN USB Hub / DVI IN 2 USB IN 1/ USBApps USB IN 2 Remote control and intelligent sensors1 Power indicator Speakers INPUT SETTINGS OK Buttons IN 1(ARC) LAN RGB IN (PC) RS-232C IN (CONTROL & SERVICE) HDMI IN 3 4 AUDIO IN (RGB/DVI) ANTENNA/ CABLE IN L/MONO LNB IN Satellite IN AV IN 2 AV IN 1 13 / 18V 700mA Max Button /I INPUT SETTINGS OK ꔉ Except for PM47** Antenna cable socket 2 Connection panel Description Turns
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
18 ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV 50/60PM68**, 50/60PM97** Image shown may differ from your TV.
ASSEMBLING AND PREPARING 1 CAUTION 42/50PM47**, 50/60PM67** M4 x 30 4EA yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much force; otherwise they may be worn out and get loosened.
20 ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table 1 Securing the TV to a wall Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. (This feature is not available for all models.) 10 cm 10 cm 2 m 10 c 10 cm Connect the power cord to a wall outlet. CAUTION 2 yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING CAUTION Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm 10 cm yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
22 ASSEMBLING AND PREPARING ENGLISH ENG Tidying cables 1 Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident. Power Cord Holder 2 Gather and bind the cables with the Cable Holder. Install the LAN Cable as shown to reduce the electromagnetic wave. Cable Holder CAUTION Do not move the TV by holding the cable holder and power cable holder, as the cable holders may break, and injuries and damage to the TV may occur.
MAKING CONNECTIONS Antenna Connection ENGLISH ENG MAKING CONNECTIONS 23 This section on MAKING CONNECTIONS mainly uses diagrams for the PM97** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
24 MAKING CONNECTIONS USB SB IN 1/ USBApps A / DVI IN 2 U DVD / Blu-Ray / PC HD Cable Box / HD STB IN 1(ARC) ENGLISH ENG HDMI Connection HDMI (*Not Provided) Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use. NOTE yy It is recommended to use the TV with the HDMI connection for the best image quality.
MAKING CONNECTIONS RGB-PC Connection IN 1(ARC) ( C) USB SB IN 1/ USBApps A / DVI IN 2 U ENGLISH ENG DVI to HDMI Connection 25 AUDIO IN (RGB/DVI) RGB IN (PC) PC (*Not Provided) (*Not Provided) RGB OUT (PC) AUDIO OUT AUDIO OUT DVI OUT DVD / Blu-Ray / PC / HD Cable Box Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable.
26 MAKING CONNECTIONS Composite Connection AV IN 2 AV IN 2 L/MONO IN L/MONO IN ENGLISH ENG Component Connection RED (*Not Provided) RED WHITE RED BLUE GREEN L(MONO) R RED VIDEO WHITE AUDIO YELLOW VIDEO WHITE YELLOW RED WHITE RED BLUE GREEN (*Not Provided) AUDIO DVD / Blu-Ray / HD Cable Box Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown.
MAKING CONNECTIONS HUB (*Not Provided) OPTICAL AUDIO IN Digital Audio System You may use an optional external audio system instead of the built-in speaker. NOTE yy If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
28 MAKING CONNECTIONS Euro Scart Connection (*Not Provided) AV IN 1 ENGLISH ENG CI module Connection (*Not Provided) AUDIO / VIDEO View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. To display images by using progressive scan, make sure to use the euro scart cable.
REMOTE CONTROL 29 ENGLISH ENG REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
30 MAGIC REMOTE CONTROL FUNCTIONS ENGLISH ENG MAGIC REMOTE CONTROL FUNCTIONS This item is not included for all models. When the message “Magic Remote Control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
MAGIC REMOTE CONTROL FUNCTIONS It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. BACKto register HOME How the Magic Remote Control P MY APPS 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.
32 USING THE USER GUIDE ENGLISH ENG USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. Press the HOME button to access the HOME menu. Select User Guide and press Wheel(OK). 1 2 1 User Guide OPTION > To set language HOME Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Selects a language for the display text.
MAINTENANCE / TROUBLESHOOTING 33 ENGLISH ENG MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
34 EXTERNAL CONTROL DEVICE SETUP / SPECIFICATIONS ENGLISH ENG EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit www.lg.com SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Wireless LAN module(TWFM-B003D) specification Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO 802.11a: 11 dBm Output Power (Typical) 802.
SPECIFICATIONS MODELS Dimensions With stand (mm) (W x H x D) Without stand (mm) With stand (kg) Weight Without stand (kg) 1168.0 x 704.0 x 53.0 28.2 19.0 25.8 50PM67** 50PM68** 1168.0 x 768.0 x 297.0 1168.0 x 704.0 x 53.0 With stand (kg) 28.8 28.1 Without stand (kg) 26.4 26.4 50PM97** 60PM67** 50PM9700-ZA 50PM970S-ZA 50PM970T-ZA 1168.0 x 765.0 x 297.0 60PM6700-ZA 60PM670S-ZA 60PM670T-ZA 1386.8 x 883.2 x 354.
36 SPECIFICATIONS ENGLISH ENG Television system Programme coverage Maximum number of storable programmes Satellite Digital TV1 Digital TV2 Digital TV Analogue TV DVB-T DVB-C DVB-S/S2 DVB-T/T2 DVB-C DVB-T DVB-C PAL/SECAM B/G/D/K, SECAM L/L’ VHF, UHF C-Band, Ku-Band VHF, UHF 6,000 1,500 VHF: E2 to E12, UHF : E21 to E69, CATV: S1 to S20, HYPER: S21 to S47 External antenna impedance 75 Ω 1 2 Only satellite models Only DVB-T2 support models HDMI/DVI-DTV supported mode Component port connectin
SPECIFICATIONS 37 yyMedia contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D Top & Bottom to play in 3D. yyVideo, which is input as HDMI,USB,DLNA, is switched into the 3D screen automatically. (This function does not support all of the 3D video format. The specific 3D video format is not switched into the 3D screen automatically. ) yy2D->3D mode is available to watch for all signals.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Country Service 0 810 144 131 800 187 40 32 15 200255 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.