OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. 42PT200 50PV400 42PT250U 42PT350C 50PT200 60PV400 50PT250U 50PT350C 42PT330 50PV430 50PV550U 50PV450C 50PT330 60PV430 60PV550U 60PV450C 42PT350 50PV450 50PT350 60PV450 MODEL SERIAL P/NO : SAC34173308(1102-REV02) www.lg.
WARNING WARNING To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTIONS 4 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding (can differ by country) If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 82 Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Preset Sound Settings (Sound Mode) . . . . . . . . . . . . . . 84 Sound Setting Adjustment - User Mode . . . . . . . . . . . 85 Infinite Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Balance . . . . . . . . . . . . . . . . . . . .
FEATURE OF THIS TV ■ This feature is not available for all models. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. This TV contains the detailed calibrations necessary for professional certification by the Imaging Science Foundation.
PREPARATION ACCESSORIES Owner’s Manual CD Manual (For 42/50PT200, 42/50PT330, 42/50PT350, 42/50PT350C, 42/50PT250U, 50PV400, 50PV430, 50PV450, 50PV450C, 50PV550U) x4 Protection Cover and Tape (Refer to P.14) Power Cord Ferrite Core (Depending on model) PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below.
PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your TV. PREPARATION Intelligent Sensor Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. The LED is off while the TV remains on. ENTER VOL CH HOME POWER Button INPUT Button HOME Button ENTER ENTER Button VOL CH VOLUME Buttons CHANNEL Buttons ENTER You can operate the buttons just by touching them lightly with your finger.
BACK PANEL INFORMATION Image shown may differ from your TV.
PREPARATION PREPARATION 1 HDMI/DVI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included) 2 OPTICAL DIGITAL AUDIO OUT Optical digital audio output for use with amps and home theater systems. Note: In standby mode, this port doesn’t work. 3 RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. 4 AUDIO IN (RGB/DVI) 1/8” headphone jack for analog PC audio input.
STAND INSTRUCTION ■ Image shown may differ from your TV. Installation Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the Stand Body with the Stand Base of the TV. PREPARATION 1 Stand Body x3 x3 Stand Base M5x14.5 M5x24 (For 60PV400, 60PV430, 60PV450, 60PV450C, 60PV550U) 3 4 (For 42/50PT200, 42/50PT330, 42/50PT350, 42/50PT350C, 42/50PT250U, 50PV400, 50PV430, 50PV450, 50PV450C, 50PV550U) Assemble the TV as shown.
PREPARATION Detachment PREPARATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the screws from TV. x4 x4 M4x28 (For 60PV400, 60PV430, 60PV450, 60PV450C, 60PV550U) 3 M4x26 (For 42/50PT200, 42/50PT330, 42/50PT350, 42/50PT350C, 42/50PT250U, 50PV400, 50PV430, 50PV450, 50PV450C, 50PV550U) Detach the stand from TV. Attach the protection cover tape.
CABLE MANAGEMENT ■ Image shown may differ from your TV. Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. 2 Gather and bind the cables with the cable holder. POWER CORD HOLDER PREPARATION 1 CABLE HOLDER CAUTION G Do not move the TV by holding the cable holder and power cord holder, as the cable holders may break, and injuries and damage to the TV may occur.
PREPARATION DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. PREPARATION 4 inches 4 inches 4 inches 4 inches CAUTION G G Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source. SWIVEL STAND ■ This feature is not available for all models.
VESA WALL MOUNTING VESA (A * B) Model 42/50PT200, 42/50PT330, 42/50PT350, 42/50PT350C, 50PV400, 50PV430, 50PV450, 50PV450C, 42/50PT250U, 50PV550U 60PV400, 60PV430, 60PV450, 60PV450C, 60PV550U A B Standard Screw Quantity Wall Mounting bracket (sold separately) PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ PREPARATION ■ ■ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
■ To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION PREPARATION R 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. EXTERNAL EQUIPMENT SETUP Component Connection 1.
1. How to connect HDMI-DTV OUTPUT 1 Connect the digital set-top box to H D M I / D V I I N 1, 2 , or H D M I I N 3 jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. 1 OPTICAL DIGITAL AUDIO OUT AUDIO (RGB/DVI) 1 HDMI/DVI IN RGB IN(PC) 2 RS-232C IN Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1, 2, or 3 input source on the TV using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect OPTICAL DIGITAL AUDIO OUT Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV. 2 AUDIO IN (RGB/DVI) 1 HDMI/DVI IN RGB IN (PC) Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1 or 2 input source on the TV using the I N P U T button on the remote control. ■ RS-232C IN 2.
DVD SETUP Component Connection 1. How to connect 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). ■ ■ ■ PB Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the TV. 2. How to use ■ Y L 1 DIO IN B/DVI) Turn on the DVD player, insert a DVD. Select the C o m p o n e n t1 input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect No separate audio connection is necessary. HDMI supports both audio and video. 1 OPTICAL DIGITAL AUDIO OUT 2. How to use ■ ■ Select the HDMI1, 2, or 3 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.
VCR SETUP Antenna Connection 1. How to connect ANTENNA/ CABLE IN EXTERNAL EQUIPMENT SETUP Connect the RF antenna out socket of the VCR to the A N T E N N A / C A B L E I N socket on the TV. 1 1 2 Connect the antenna cable to the RF antenna in socket of the VCR. ANT OUT S-VIDEO ANT IN OUTPUT SWITCH ■ L R Wall Jack 2 2. How to use ■ VIDEO Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder 1. How to connect ■ ■ ■ Select the A V 2 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. R USB IN L HDMI IN 3 EXTERNAL EQUIPMENT SETUP 2. How to use VIDEO 1 VIDEO L/MONO AUDIO R 1 Video Game Set V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors.
AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. 1. How to connect OPTICAL DIGITAL AUDIO OUT AUDIO (RGB/DVI) ! NOTE G RS-232C IN Set the “TV Speaker option - Off” in the AUDIO menu. (G p.88) See the external audio equipment instruction manual for operation. 3 (CONTROL & SERVICE) 1 2 1 HDMI/DVI IN 2 RGB(PC) Connect the other end of the optical cable to the digital audio input on the audio equipment.
EXTERNAL EQUIPMENT SETUP PC SETUP VGA (D-Sub 15 pin) Connection 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. NI C232-SR NI C232-SR RGB IN (PC) EXTERNAL EQUIPMENT SETUP 1 Connect the VGA output of the PC to the R G B I N ( P C) jack on the TV. 1 VIDEO 1 COMPONEN 2 1 2. How to use ■ ■ Turn on the PC and the TV. Select the R G B - P C input source on the TV using the I N P U T button on the remote control.
! NOTE Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. G Avoid keeping a fixed image on the screen for a long period of time.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution PICTURE Move Screen Enter • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 Resolution Auto config. Position R G • Expert Control • Reset Size Phase Screen (RGB-PC) Reset 1 Home 2 ENTER Select P I C T U R E. Select S c r e e n ( R G B - P C ). 3 ENTER Select R e s o l u t i o n. 4 ENTER 5 ENTER 30 Move E EXTERNAL EQUIPMENT SETUP You can choose the resolution in RGB-PC mode.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move Screen Enter Move Prev. E • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 Resolution Auto config.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. EXTERNAL EQUIPMENT SETUP PICTURE Move Screen Enter Move Prev. E • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 Resolution D Auto config.
Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. Move Screen Enter Move Prev. E • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 Resolution Auto config. Position R • Expert Control • Reset Screen (RGB-PC) Initialize Settings. G Yes Size Phase Reset No EXTERNAL EQUIPMENT SETUP PICTURE G 1 Home Select P I C T U R E.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. The remote control may differ from the images below. POWER Turns the TV on from standby or off to standby. LIGHT Illuminates the remote control buttons. (Depending on Model) LIGHT ENERGY AV MODE INPUT WATCHING TV / CHANNEL CONTROL ENERGY SAVING Adjusts the Energy Saving. TV SAVING AV MODE Toggles through preset Video and Audio modes. G p.
VOLUME UP Adjusts the volume. /DOWN RATIO Changes the aspect ratio. MUTE Switches the sound on or off. G p.36 CHANNEL Changes the channel. UP/DOWN PAGE Moves from one full set of screen information to the next one. UP/DOWN INFO Displays channel information at the top of the screen. Home Displays the main menu or clears all on-screen displays and returns to TV viewing. WATCHING TV / CHANNEL CONTROL FAV/MARK Scroll through the programmed Favorite channels. G p.
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, TV is in standby mode. ■ In standby mode to turn TV on, press the , INPUT, CH ( or INPUT, CH( or ), Number (0~9 9) button on the remote control. 1 ) button on the TV or press the POWER, WATCHING TV / CHANNEL CONTROL 2 Select the viewing source by using the I N P U T button on the remote control. 3 When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. ■ ■ ■ Step1. Welcome Step4. Time setting Time Setting WELCOME ! Current Time Setting Thank you for choosing LG F Year Month Next 1 ENTER G 11 Date 15 Hour 5 PM Minute 52 Time Zone Eastern Daylight Saving Step2.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Q.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected during TV broadcasting hours. Auto Tuning memorizes only the channels available at the time.
Add/Delete Channel (Manual Tuning) If you select DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Enter DTV F G Select channel type and RF-channel number. Channel 2 DTV 2-1 Bad Normal Good Add Close 1 Select C H A N N E L. Home 2 Select M a n u a l T u n i n g.
WATCHING TV / CHANNEL CONTROL Channel Editing When a channel number is deleted, it means that you will be unable to select it using CH , button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu. WATCHING TV / CHANNEL CONTROL CHANNEL Move Enter Auto Tuning Manual Tuning Channel Edit Ch.Change Move CH Move Page Previous Add/Delete 1 Home 2 ENTER Select C H A N N E L.
CHANNEL LIST You can check channels which are stored in the memory by displaying the channel list. Channel List 2-1 3-1 4-1 Exit Displaying Channel List 1 Display the C h a n n e l L i s t. LIST WATCHING TV / CHANNEL CONTROL This padlock is displayed when the channel is locked with parental control. Selecting a channel in the channel list 1 Select a channel. 2 ENTER Switch to the chosen channel number. Paging through a channel list 1 CH 2 EXIT P A G E Turn the pages. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL FAVORITE CHANNEL SETUP Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select through all the in-between channels. 1 Q.
FAVORITE CHANNEL LIST Displaying the favorite channel list Favorite List 1MARK 2-1 Display the Favorite channel list. FAV 3-1 4-1 Selecting a channel in the favorite channel list 1 Select a channel. ENTER Switch to the chosen channel number. Exit Paging through a favorite channel list 1 CH 2 EXIT P A G E Turn the pages. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL BRIEF INFORMATION Brief Info shows the present screen information. 1 or INFO ENTER Show the Brief Info on the screen. WATCHING TV / CHANNEL CONTROL 2 Return to TV viewing EXIT 7 1 2 3 4 5 6 Brief Info Title Test.. DOLBY DIGITAL CNN Sat, Feb 21, 2009 Multilingual 10:40 AM 10:10 AM D CC Caption 11:40 AM 1080i TV-PG D L S V Multilingual : The program contains two or more audio services. Use the Q . M E N U menu to select wanted Audio.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. TV AV2 Component1 Component2 INPUT ENTER Select the desired input source. TV AV1 HDMI3 AV2 Component1 HDMI1 HDMI2 ie) Component2 RGB-PC Disconnected inputs are inactive (grayed out) TV AV1 AV2 Component1 Component2 Input Label Exit WATCHING TV / CHANNEL CONTROL 1 AV1 Select a desired input source (except T V).
WATCHING TV / CHANNEL CONTROL INPUT LABEL This indicates which device is connected to which input port.
AV MODE AV Mode toggles through preset Video and Audio settings. Cinema Game Sport Press the A V M O D E button repeatedly to select the desired source. 2 ENTER ■ ■ ■ ■ ■ ■ ■ ■ C i n e m a” in AV mode, If you select “C C i n e m a will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively. O f f” in AV mode, the If you select “O P i c t u r e M o d e” and “S S o u n d M o d e” “P return to previous selected value. O f f: Disables the AV MODE.
WATCHING TV / CHANNEL CONTROL Simplink allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus.
SIMPLINK Functions D i r e c t P l a y : After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of the AV devices connected to TV. ■ D i s c p l a y b a c k : Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. ■ P o w e r o f f a l l d e v i c e s : When you power off the TV, all connected devices are turned off.
USB - For 42/50PT350, 42/50PT350C, 50/60PV450, 50/60PV450C, 42/50PT250U, 50/60PV550U ENTRY MODES When you connect a USB device, this screen is displayed automatically. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the U S B IN jacks on the side of TV. ■ ■ It doesn’t support USB HDD. This TV supports JPG and MP3 files. When removing the USB device Select the E j e c t U S B menu before removing the USB device. 1 2 ENTER Select E j e c t.
PHOTO LIST You can view (*.JPG) files from USB storage devices. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG ■ ■ You can play JPG files only. Only baseline scan is supported among JPG. USB Screen Components 2 1 Home ENTER Select U S B. ENTER Select P h o t o L i s t. 3 1 2 Moves to upper level folder. Current page/Total pages. 4 Total number of marked photo files. 6 Corresponding buttons on the remote control.
USB Photo Selection and Popup Menu PHOTO LIST Top Folder USB Device Page 1/1 No Marked Free Space 150MB DriveA DriveA 2 folder, 4 file(s) USB Up Folder Move PopUp Menu PHOTO LIST DriveA CH Move Page USB Device Page 1/1 No Marked Free Space 150MB Photo 1366x768, 125KB X.
Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. USB Device PHOTO LIST Page 1/1 Top Folder No Marked Free Space 150MB DriveA DriveA USB 2 folder, 4 file(s) Up Folder Move PopUp Menu PHOTO LIST DriveA CH Move Page MARK Exit Mark USB Device Page 1/1 No Marked Free Space 150MB Up Folder DSC0001 Photo 1366x768, 125KB X.
USB 6 Select the Slide show, BGM, ENTER (Rotate), D e l e t e, or Hide. ■ 1/17 Q.MENU Option Slide show BGM Delete Hide Use button to select the previous or next photo. ■ Use button to select and control the menu on the full-sized screen. USB S l i d e s h o w: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show. ■ Set the time interval of the slide show in O p t i o n.
Using the Photo List Option Choose option Set photo view. Set video. 1/17 BGM Delete Hide Set audio. Exit 1 Q.MENU Show the Popup menu. 2 ENTER G ■ USB Slide show Q.MENU Option Select S e t P h o t o V i e w, S e t V i d e o, or S e t A u d i o. When you select the S e t P h o t o V i e w. You cannot change M u s i c F o l d e r while BGM is playing. Set photo view. Slide Speed Fast Music Folder ... Prev. 1 ENTER Show the S l i d e S p e e d or M u s i c F o l d e r.
USB G When you select the S e t V i d e o. Set video. Vivid Picture Mode Contrast 100 Brightness 50 USB Sharpness 70 Color 80 Tint 0 W C Color Temperature 0 W C Medium Noise Reduction Reset Prev. 1 ENTER 2 ■ ENTER G Show the P i c t u r e M o d e. Make appropriate adjustments. APS mode is not supported in Set Video function. When you select the S e t A u d i o. Set audio. Sound Mode Cinema Auto Volume Off Clear Voice ll Off Balance 0 L R Prev.
MUSIC LIST You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. USB Supported music file: *.MP3 Bit rate range 8Kbps - 320Kbps • Sampling rate (Sampling Frequency) MPEG1Layer 3: 8KHz - 48KHz • Music Max Length: 999.59 Sec. Screen Components 1 2 Home Select U S B. ENTER ENTER 3 1 2 Moves to upper level folder. Current page/Total pages.
USB Music Selection and Popup Menu Up to 6 music titles are listed per page. MUSIC LIST USB Device Page 1/1 No Marked MP3 Title Arirang A Free Space 150MB Duration Up Folder Arirang 04:12 Good Bye 05:30 00:00 / 04:16 Up Folder USB Move PopUp Menu CH MUSIC LIST Move Page Q.
Using the Music List Option MUSIC LIST USB Device Page 1/1 No Marked MP3 Title Arirang A Free Space 150MB Set audio. Duration Up Folder Arirang 04:12 Good Bye 05:30 00:00 / 04:16 Sound Mode Cinema Auto Volume Off Clear Voice ll Off Up Folder Balance Move PopUp Menu CH Move Page Q.MENU Option MARK Mark 0 L R Exit 1 Q.MENU 2 USB Exit Show the S o u n d M o d e. Make appropriate adjustments.
USB MOVIE LIST - For 42/50PT250U, 50/60PV550U The movie list is activated once a USB drive is detected. It is used when playing movie files on the TV. Displays the video files in the USB folder that it recognizes as a video file. Editing such as delete and add is not allowed. Movie (*.AVI/ *.mp4/ *.DivX/ *.DAT/ *.MPG/ *.MPEG/ *.MPE/ *.VOB) supporting file Bit rate : within 32 - 320kbps (MP3) Subtitle format : *.ass/ *.smi/ *.srt/ *.
Screen Components 1 2 Home Select U S B. ENTER Select M o v i e L i s t. ENTER 3 Moves to upper level folder. 2 Preview: Display the title/folder name of the movie in the selected folder. 3 Current page/Total pages. 4 Total number of marked movie files. 5 Usable USB memory. 6 Corresponding buttons on the remote control.
USB Movie Selection and Popup Menu MOVIE LIST DriveA Butterfly USB Device Page 2/3 No Marked Title Free Space 150MB Duration Up Folder 640x480, 707MB Up Folder USB Navigation Butterfly 00:03:33 B001 00:04:45 B002 00:01:13 B003 00:03:13 B004 00:02:51 PopUp Menu Page Change CH MARK Mark Exit P l a y: Play the selected movie. DivX Play is executed while screen changes. G P l a y M a r k e d: Play the selected movie titles.
Using the remote control You can adjust various method during movie play. FF II During playback, press the P a u s e( I I) button ■ Still screen is displayed. ■ P L A Y ( G) When using the or buttons during playback a cursor indicating the position can be viewed on the screen. USB / GG When playing, repeatedly press the R E W( FF) button to speed up FF -> FFF -> FFFF -> FFFFF ->FFFFFF . repeatedly press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG -> GGGGGG.
USB Using The Movie List Option Choose option Set video play. Set video. Set audio. Q.MENU Option Exit ! NOTE G If you select “Off” for TV speaker, S e t A u d i o features in choose options will not work. USB 1 Q.MENU Show the Popup menu. 2 ENTER G Select S e t V i d e o P l a y, S e t V i d e o, or S e t A u d i o. When you select the S e t V i d e o P l a y. P i c t u r e s i z e : Selects your desired picture format for videos.
When you select the S e t V i d e o. G Set video. Picture Mode Standard Contrast 100 Brightness 50 70 Color 80 Tint 0 W C Color Temperature 0 W C Noise Reduction USB Sharpness Low Reset Prev. 1 ENTER Show the P i c t u r e M o d e. 2 Make appropriate adjustments. ENTER G When you select the S e t A u d i o. Set audio. Sound Mode Cinema Auto Volume Off Clear Voice ll Off Balance 0 L R Prev.
USB DIVX REGISTRATION CODE - For 42/50PT250U, 50/60PV550U Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. DRM protected DivX files must be matched with the registration code of this TV are playable. DivX files registered for another TV will not play. USB Move Enter USB Photo List Photo List Music List Music List Movie List Movie List DivX Reg. Code DivX Reg.
DEACTIVATION - For 42/50PT250U, 50/60PV550U Delete the existing authentication information to receive a new DivX user authentication for TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files. USB Move Enter USB Photo List Photo List Music List Music List Movie List Movie List DivX Reg. Code DivX Reg.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input only supports 4:3 and 16:9 aspect ratio. Q.Menu Aspect Ratio F Vivid Sound Mode Standard G Just Scan Set By Program Cinema Zoom Zoom 4:3 English Multi Audio Sleep Timer Off Del/Add/Fav Add Eject USB Eject PICTURE CONTROL Close 1 Q.MENU Select the A s p e c t R a t i o. 2 Select the desired picture format.
16:9 4:3 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. JUST SCAN PICTURE CONTROL Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video.
PICTURE CONTROL PICTURE WIZARD - Except 42/50PT250U, 50/60PV550U This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to L o w, R e c o m m e n d e d, or H i g h you can see the example of the changes you made. White Level Move 90 50 60 60 0 Set the screen above identical to the Recommended sample below.
i.e) Horizontal Sharpness Complete Select (an) input(s) to apply the settings. Set the screen above identical to the Recommended sample below. DTV TV AV1 AV2 Recommended 50 E • H Sharpness High Component1 Component2 E Low RGB HDMI1 HDMI2 HDMI3 Next Warning: The picture quality may vary according to the different types of signal and inputs. Adjust H o r i z o n t a l S h a r p n e s s.
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the P i c t u r e M o d e. P i c t u r e M o d e -C i n e m a”.
PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Q.Menu Aspect Ratio 16:9 F Picture Mode G Vivid Standard Sound Mode Standard Auto Power Save Off Caption English Multi Audio CH Vivid Sleep Timer Off Del/Add/Fav Add Eject USB Eject Cinema Expert2 Expert1 Game Sport Close Q.MENU 2 Select P i c t u r e M o d e.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT-USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Wizard Energy Saving : Intelligent Sensor E 90 • Brightness 50 • Sharpness 60 • Color 60 • Tint 0 • Contrast 80 E R E • Contrast E Picture Mode : Standard Enter G E PICTURE CONTROL 1 Home Select P I C T U R E. ■ ENTER Select P i c t u r e M o d e.
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video options differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Reset” function for each Picture Mode.
PICTURE CONTROL EXPERT PICTURE CONTROL E x p e r t 1 and E x p e r t 2 provide even more advanced picture settings for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in. PICTURE Move PICTURE Enter Vivid Energy Saving : Intelligent Sensor Expert1 • Contrast Standard 80 Auto Power Save • Brightness 50 • H Sharpness 50Cinema R • V Sharpness 50Sport • Color G 50Game E F Edge Enhancer Expert2 PICTURE CONTROL 1 Select P I C T U R E.
Dynamic Contrast Dynamic Color Noise Reduction Gamma Black Level Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■ Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. ■ Reduces screen noise without compromising video quality.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE Enter Move Enter E E • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 i R G • Contrast 90 • Brightness 50 • H Sharpness 60 • V Sharpness 60 Resetting video configuration... • Color 60 • Tint 0 R • Expert Control • Reset G • Expert Control • Reset Screen (RGB-PC) Screen (RGB-PC) 1 3 Home Select P I C T U R E.
IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. Q.Menu Aspect Ratio 16:9 Picture Mode Vivid F Sound Mode G Standard Music Cinema English Multi Audio CH Standard Off Caption Sleep Timer Off Del/Add/Fav Add Eject USB Eject Game Sport Close SOUND & LANGUAGE CONTROL 1 Q.MENU Select S o u n d M o d e.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move : Off Clear Voice II : Off +3 Balance Sound Mode Enter 0 L R : Standard AUDIO : Off Clear Voice II : Off Off • Infinte Surround: 50 • Treble 50 • Bass 50 • Bass 50 1 Home 2 : On • Reset TV Speaker R : On Off Infinite Sound Off Treble 50 Bass 50 Close Select A U D I O. Select S o u n d M o d e. ENTER Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e.
SOUND & LANGUAGE CONTROL INFINITE SURROUND Select this option to sound realistic. Move : Off Clear Voice II : Off +3 Balance Sound Mode Enter 0 L R : Standard AUDIO : Off Clear Voice II : Off 0 • Infinite Surround: • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset TV Speaker SOUND & LANGUAGE CONTROL 1 Home • Reset TV Speaker ENTER Select I n f i n i t e S u r r o u n d. ENTER Select O n or O f f.
BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move : Off Clear Voice II : Off +3 0 L R : Standard AUDIO : Off Clear Voice II : Off Off • Infinte Surround: 50 • Treble 50 • Bass 50 • Bass 50 Home : On Select A U D I O. 2 ENTER Select B a l a n c e. 3 ENTER Make appropriate adjustments. 4 BACK EXIT Return to the previous menu.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Move Auto Volume : Off Clear Voice II : Off +3 Balance 0 Sound Mode Enter L R : Standard AUDIO Auto Volume : Off Clear Voice II : Off Off TV Speaker 0 • Infinte Surround: 50 • Treble 50 • Bass 50 • Bass 50 : On • Reset TV Speaker : On Off On SOUND & LANGUAGE CONTROL 1 Home Select A U D I O. ENTER Select T V S p e a k e r. ENTER Select O n or O f f.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move Auto Volume : Off Clear Voice II : Off +3 Balance Sound Mode AUDIO Enter 0 L : Standard • Infinte Surround: Off R : Off Clear Voice II : Off 50 • Treble 50 • Bass 50 • Bass 50 Home Select A U D I O. ENTER Select R e s e t. 3 ENTER Initialize the adjusted value. EXIT Return to TV viewing.
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.
AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. 2 ENTER 3 ENTER OPTION Language Input Label Input Label Move Enter Audio SIMPLINK : On SIMPLINK Key Lock : Off Key Lock : Off Caption : Off Caption : Off Demo Mode : Off Demo Mode : Off ISM Method : Normal ISM Method : Normal Set ID :1 Set ID :1 Initial Setting : Home Use Initial Setting : Home Use Select O P T I O N.
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. Move Enter Language Key Lock : Off Key Lock : Off Caption : Off Caption : Off Demo Mode : Off Demo Mode : Off ISM Method : Normal ISM Method : Normal Set ID :1 Set ID :1 Initial Setting : Home Use Initial Setting : Home Use SOUND & LANGUAGE CONTROL ENTER Select L a n g u a g e. ENTER Select M e n u. ENTER Select your desired language.
CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
SOUND & LANGUAGE CONTROL Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is turned On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter Clock TIME Move Enter F Clock Manual G Off Time : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off 2008 Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 Home Select T I M E. G ENTER Select C l o c k. ENTER Select M a n u a l.
TIME SETTING AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Q.Menu Aspect Ratio 16:9 Picture Mode Vivid Sound Mode Standard Off Caption English Multi Audio Sleep Timer CH F Off Del/Add/Fav Add Eject USB Eject G Close 1 2 Select S l e e p T i m e r. ■ Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0, or 2 4 0 minutes. 3 EXIT You can also adjust S l e e p T i m e r in the T I M E menu. TIME SETTING Q.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System Enter : Off LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block Enter Off On 1 Home 2 1 2 ENTER Select L O C K. 3 4 5 6 7 8 9 Input the password. 0 3 4 ENTER Select O n or O f f.
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER 2 1 2 3 4 5 6 7 8 9 Select L O C K. Input the password. 0 3 PARENTAL CONTROL / RATING 102 Select S e t p a s s w o r d.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Ch.Change Move CH Move Page Previous Block/Unblock 1 Home 2 1 2 3 4 5 6 7 8 9 ENTER Select L O C K. Input the password. 0 3 4 ENTER Select a channel to block or unblock. 5 Blue Block or unblock a channel.
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - Depending on model Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children - Depending on model Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL / RATINGS TV Rating General - Depending on model Based on the ratings, blocks certain TV programs that you and your family do not want to view.
TV Rating English - Depending on model Selecting the English rating system. LOCK Move Lock System Enter : Off LOCK Move Lock System Enter Blocking off : Permits all : Off programs Set Password Set Password Block Channel Block Channel TV Rating-English TV Rating-English TV Rating-French TV Rating-French Downloadable Rating Downloadable Rating Input Block Input Block E C C8+ G PG 14+ 18+ Blocking Off 1 Home 2 1 2 3 4 5 6 7 8 9 ENTER Select L O C K. ■ Input the password.
PARENTAL CONTROL / RATINGS TV Rating French - Depending on model Selecting the Canadian French rating system.
DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
APPENDIX TROUBLESHOOTING Abnormal Operation Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. *This feature is not available for all models.
Audio Problems Press the VOL or VOLUME button. Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers ■ ■ Adjust Balance in menu option. Unusual sound from inside the product ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
MODEL 42PT330 (42PT330-UB) 42PT350 (42PT350-UD) 42PT350C (42PT350C-UD) 50PT330 (50PT330-UB) 50PT350 (50PT350-UD) 50PT350C (50PT350C-UD) Dimensions (Width x Height x Depth) With stand 991.8 mm x 667 mm x 230.5 mm (39 inch x 26.2 inch x 9 inch) 1176.1 mm x 774.7 mm x 289.8 mm (46.3 inch x 30.5 inch x 11.4 inch) Without stand 991.8 mm x 613.8 mm x 52.5 mm (39 inch x 24.1 inch x 2 inch) 1176.1 mm x 716.5 mm x 52.5 mm (46.3 inch x 28.2 inch x 2 inch) Weight With stand Without stand 21.5 kg (47.
APPENDIX IR CODES (This feature is not available for all models.) 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
Code Code (Hexa) Function Note 08 POWER Remote control Button (Power On/Off) D6 45 Q.
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’.
APPENDIX Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select k x k k k k k k k k k k a b c d e f g h i j k l COMMAND1 COMMAND2 21. Channel Tuning m a DATA (Hexadecimal) 00 - 01 (G p.121) (G p.121) 00 - 01 00 - 01 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 01 COMMAND1 COMMAND2 13. Remote Control Lock Mode 14. Treble 15. Bass 16.
01. Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.
APPENDIX 12. OSD Select (Command: k l) 18. ISM Method (Command: j p) To select OSD (On Screen Display) on/off. To avoid having a fixed image remain on screen. Transmission [k][l][ ][Set ID][ ][Data][Cr] Transmission [ j ][p][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 02: Orbiter 04: White Wash 08: Normal 20: Color Wash Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 13.
Data 05: 7 Main/Sub Picture 0 Main 1 Sub 6 Two/One Part Channel 0 Two 1 One Using Physical Channel 4 3 2 1 0 Step 0 Use x 0 0 0 0 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ... Reserved 5 The table above lists the binary code which must be converted to Hexadecimal before sending.
OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. 42PT200 50PV400 42PT250U 42PT350C 50PT200 60PV400 50PT250U 50PT350C 42PT330 50PV430 50PV550U 50PV450C 50PT330 60PV430 60PV550U 60PV450C 42PT350 50PV450 50PT350 60PV450 MODEL SERIAL P/NO : SAC34173308 (1101-REV00) www.lg.