SMART TV Quick Setup Guide Please read this manual carefully before operating your set and retain it for future reference. *MBM64158205* www.lg.
* Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending on the OS(Operating System). ENGLISH ENG Wireless Network Connection wireless router or LG wireless dongle wireless router NOTE yy LG wireless dongle is required to use Wi-Fi network. yy Do not remove the wireless dongle while the wireless network is working.
Network Setting 1 Press the menu. SMARTREC button to access the Home 4 The device automatically tries to connect to the network available(wired network first). Network Connection Connecting to the network. Cancel If you select Cancel or it fails to connect to the network, the network list available is displayed. Choose the network you want. SETTINGS 2 Select the NETWORK → Network Connection menu. Network Connection Choose the network you want.
Troubleshooting Network Problems ENGLISH ENG 1 SMARTREC button to access the Home Press the menu. Check the router or consult your Internet service provider. Network Status TV Gateway DNS Internet When an ✔ appears TV and Gateway. 1 Unplug the power cord of the AP, cable modem and try to connect after 5 seconds. 2 Initialize(Reset) the AP or cable modem. 3 Contact internet companies or AP companies. Network Status SETTINGS 2 Select the NETWORK → Network Status menu.
SmartShare PC SW Installing & Setting 1 Go to www.lg.com. Then, select your region. 2 Select SUPPORT. Then, Search for your model. 3 Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW. 4 You can run the programme when installation is complete. NOTE yy SmartShare service is only available if TV and other devices are connected via a single AP (Router). SmartShare Connection to Smartphone 1 Check that Wi-Fi is enabled on your smartphone.
Updating the TV Firmware ENGLISH ENG SMARTREC→ (Settings) → SUPPORT → Software Update Use Software Update to check and obtain the latest version. If not updated, certain functions may not work properly. It is also possible to check manually for available updates. SETTINGS Software Update Set it to On. If an update is available, a prompt will appear to perform the update. Automatic update mode If an update is available, the update automatically starts without prompting.
Miracast Setting MiracastTM / Intel's WiDi The device which is applied MiracastTM and intel's WiDi technology can be shown on the TV. MiracastTM / Intel's WiDi Device Name On a Connection Connection 1 Miracast is set to On( a ) on your TV and portable device. Go to the Network settings to set the Miracast. 2 When your portable device is detected, select the device. TAAAA WiDi (Wireless Display) Setting WiDi represents Wireless Display.
Please call LG Customer Service if you experience any problems.
