User manual

19
ENGENGLISH
ASSEMBLING AND PREPARING
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
at surface.
CAUTION

Make sure that children do not climb on or
hang on the TV.
NOTE

Use a platform or cabinet that is strong and
large enough to support the TV securely.

Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
(Only LN54/53**)
(Only 32/42/47LA643*, 32/42/47LA61**)

2EA
2EA
P4 x 8
(Only 47LA643*, 47LA61**)
M4 x 8
(Only 32/42LA643*, 32/42LA61**)
CAUTION
(Only 32/42/47LA643*, 32/42/47LA61**)
How to fix the TV to a table
1. Connect the Desk-mount Cables to the
Stand Base using the Bracket Screws.
2. Fix the Desk-mount Cables to a table using
the Desk-mount Screws.
3. Once the TV is fixed, move the table close to
the wall. Children may go in, causing injuries.
WARNING

To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.