ENGLISH OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS PREPARATION 47LD9** .................................................................. A-1 ............................................................. 35 AV Mode ................................................................... 38 Initializing (Reset to original factory settings) ..39 Antenna Connection ..................................................1 Connecting with a Component cable................... 2 Connecting with an HDMI cable ...........................
CONTENTS EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) CONTENTS Switch on/off EPG .................................................. 57 Select a Programme................................................ 57 Button Function in NOW/NEXT Guide Mode . 57 Button Function in 8 Day Guide Mode...............58 Button Function in Date Change Mode............. 58 Button Function in Extended Description Box . 59 Button Function in Record/Remind Setting Mode...... 59 Button Function in Schedule List Mode..........
PREPARATION LCD TV Models : 47LD9** ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. Image shown may differ from your TV. PREPARATION ■ PO W ER ON EN ER GY 1 SAVI NG TE 3D FF TV PU /R AD T 6 8 0 9 Q.V IEW MA FA RK/ V MU NU /O IN 3 5 7 LIS T ME MOAV DE 2 4 P E G A P Q.
PREPARATION FRONT PANEL CONTROLS ! NOTE G PREPARATION TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
HDMI IN 4 VIDEO L/MONO AUDIO R BACK PANEL INFORMATION A Image shown may differ from your TV. AV IN 3 10 1 4 3 HDMI IN 4 2 11 PREPARATION H/P 5 VIDEO L/MONO AUDIO R (RGB) HDMI / DVI IN 3 2 1(DVI) 12 AV IN 3 ANTENNA IN 13 H/P 5 6 7 8 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page.(G p.102) Never attempt to operate the TV on DC power. 2 RGB/DVI Audio Input Connect the audio from a PC or DTV.
PREPARATION PREPARATION STAND INSTALLATION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. ■ 1 2 Image shown may differ from your TV. 1 Connect the cables as necessary.
KENSINGTON SECURITY SYSTEM Image shown may differ from your TV. CAREFUL INSTALLATION ADVICE ■ You should purchase necessary components to fix the TV safety and secure to the wall on the market. A Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
PREPARATION A A The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. EARTHING 10 cm 10 cm 10 cm 10 cm PREPARATION Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the TV on from standby or off to standby. ON/OFF Key lighting on or off. TV/RAD Selects Radio, TV and DTV channel. ON/OFF TV/RAD AV MODE INPUT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW ENERGY SAVING Adjust the Energy Saving mode of the TV.(G p . 6 3) AV MODE It helps you select and set images and sounds when connecting AV devices.(G p .
PREPARATION POWER VOLUME UP Adjusts the volume. /DOWN PREPARATION ON/OFF MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. TV/RAD AV MODE INPUT 1 2 3 4 5 6 Programme Selects a programme. UP/DOWN 7 8 9 PAGE Move from one full set of screen information to the next UP/DOWN one. LIST 0 Q.VIEW FAV Displays the selected favourite programme. ENERGY SAVING MUTE Switches the sound on or off.
To prevent damage do not connect to the mains outlet until all connections are made between the devices. VIDEO L/MONO AUDIO R ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ Image shown may differ from your TV. CONNECTING WITH A COMPONENT CABLE ■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
CONNECTING WITH AN HDMI CABLE 1 Connect the HDMI output of the external equipment (digital set-top box, DVD, etc.) to H D M I / D V I I N 1 ( D V I ), H D M I / D V I I N 2 , H D M I / D V I I N 3 or H D M I I N 4 jack on the TV. 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) HDMI / DVI IN 2 1(DVI) Select H D M I 1, H D M I 2, H D M I 3 or H D M I 4 input source using the I N P U T button on the remote control.
VIDEO L/MONO AUDIO R EXTERNAL EQUIPMENT SETUP CONNECTING WITH A EURO SCART CABLE AV IN 3 1 Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the A V 1 Euro scart socket on the TV. 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) (RGB) H/P ANTENNA IN EXTERNAL EQUIPMENT SETUP Select A V 1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select A V 2 input source.
VIDEO AV IN 3 H/P 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Or, Operate the corresponding external equipment. (Refer to external equipment operating guide.) 1 AV V IN 3 H/P Select A V 3 input source using the I N P U T button on the remote control. S-VIDEO L VIDEO OUTPUT SWITCH ANT OUT or ! NOTE G ANT IN R If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.
V H/P VIDEO L/MONO AUDIO R EXTERNAL EQUIPMENT SETUP HDMI IN 4 H/P AV IN 3 VIDEO L/MONO AUDIO R V AV IN 3 CONNECTING WITH A D-SUB 15 PIN CABLE AV IN 3 AV IN 3 HDMI IN 4 This TV provides Plug and Play capability, meaning that the PC adjusts to the TV's settings. H/P automatically H/P HDMI / DVI IN 3 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. AV IN 3 H/P 1 2 1(DVI) HDMI IN 4 2 Connect the RGB output of the PC to the R G B I N ( P C ) jack on the TV.
DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2 Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution HDMI/DVI-DTV mode RGB-PC, HDMI/DVI-PC mode Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 70.08 720x480 31.469/31.5 59.94/60 EXTERNAL EQUIPMENT SETUP 640x480 31.469 59.94 720x576 31.25 50 800x600 37.879 60.31 1280x720 37.5 50 1024x768 48.363 60.00 44.96/45 59.94/60 1280x768 47.78 59.87 33.72/33.75 59.94/60 1920x1080 1360x768 47.72 59.80 28.
Screen Setup for PC mode Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. Move SCREEN OK E • Contrast 90 • Brightness 50 • Sharpness 70 • Colour 60 • Tint 0 Prev. Resolution Auto Config. Position R G Size • Advanced Control • Picture Reset Move To Set Yes No Phase Screen Screen Reset EXTERNAL EQUIPMENT SETUP PICTURE 1 MENU 2 Select P I C T U R E. OK Select S c r e e n. OK Select R e s e t.
EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. PICTURE Move SCREEN OK E EXTERNAL EQUIPMENT SETUP Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] Move Resolution E • Contrast 90 • Brightness 50 • Sharpness 70 • Colour 60 • Tint 0 Move Prev. OK Auto Config. 1024 x 768 1280 x 768 1360 x 768 Position R G Size • Advanced Control • Picture Reset Screen Screen Phase Reset EXTERNAL EQUIPMENT SETUP SCREEN PICTURE 1 MENU 2 Select P I C T U R E. OK Select S c r e e n.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. EXTERNAL EQUIPMENT SETUP PICTURE Move SCREEN OK Move Prev. E • Contrast 90 • Brightness 50 • Sharpness 70 • Colour 60 • Tint 0 Resolution Auto Config.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV - When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. And switch the M a i n P o w e r S w i t c h on TV. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the r / I, INPUT or P D E button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. WATCHING TV / PROGRAMME CONTROL A s p e c t R a t i o: Selects your desired picture format. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING (For countries other than Finland and Sweden) Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may differ slightly depending on broadcasting signals.
AUTO PROGRAMME TUNING (Only for Finland and Sweden) DVB-C Auto Tuning is a menu for users in countries that support DVB cable. Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. If you want to select the A n t e n n a, SETUP Move OK SETUP Auto Tuning Manual Tuning Manual Tuning Programme Edit Move OK Please select your TV Connection. Check your antenna connection.
WATCHING TV / PROGRAMME CONTROL If you want to select the C a b l e, SETUP Move OK SETUP Move OK Please select your TV Connection.
MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. (For countries other than Finland and Sweden & When selecting Antenna if Finland, Sweden or “--” country is chosen) SETUP Move SETUP OK Move F Auto Tuning Manual Tuning Tuning Manual Manual Tuning Programme Edit Programme Edit : Off Booster : Off Software Update : On Software Update : On Diagnostics CI Information CI Information DTV UHF CH.
WATCHING TV / PROGRAMME CONTROL (When selecting Cable (DVB cable mode) if Finland, Sweden or “--” country is chosen) SETUP Move SETUP OK Move F OK DTV Auto Tuning Auto Tuning Frequency(kHz) Manual Tuning Tuning Manual Manual Tuning Symbol rate(kS/s) Programme Edit Programme Edit WATCHING TV / PROGRAMME CONTROL Booster : Off Booster Modulation : Off Software Update : On Software Update : On Diagnostics Diagnostics CI Information CI Information Bad G 362000 6875 640AM Normal G
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP Move OK SETUP Move Auto Tuning Auto Tuning Manual Tuning Manual Tuning Programme Edit Programme Edit : Off Booster Software Update : On Software Update Diagnostics Diagnostics CI Information CI Information TV F Storage : Off System : On Band G 3 BG V/UHF Channel 0 Fine F G Search F G Name C 02 Store Close 1 MENU 2 OK Select S E T U P.
WATCHING TV / PROGRAMME CONTROL SETUP Move SETUP OK Move Auto Tuning Auto Tuning Manual Tuning Manual Tuning Programme Edit Programme Edit : Off Booster Software Update : On Software Update Diagnostics CI Information CI Information TV F Booster Diagnostics OK Storage : Off System : On Band G 3 BG V/UHF Channel 0 Fine F G Search F G Name C 02 Store WATCHING TV / PROGRAMME CONTROL Close A Assigning a station name You can assign a station name with five characters to each p
PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P viewing. button during TV If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you start Auto Tuning.
WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE A Skipping a programme number 1 • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG. BLUE Release.
BOOSTER (IN DIGITAL MODE) If reception is poor select Booster to On. When the signal is strong, select "Off". SETUP Move OK SETUP Auto Tuning Manual Tuning Manual Tuning Programme Edit Booster Booster : On Booster Booster Software Update Diagnostics Diagnostics CI Information CI Information 1 OK Programme Edit ::On Off Software Update Move Off : On Off On On : On Select S E T U P. MENU 2 Select B o o s t e r. OK 3 WATCHING TV / PROGRAMME CONTROL Auto Tuning Select O n or O f f.
WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP Move SETUP OK Auto Tuning Manual Tuning Manual Tuning Booster : Off Booster Software Update On :: On Software Update Diagnostics Diagnostics CI Information CI Information OK 4 Select S o f t w a r e U p d a t e. OK OK Save.
DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.)) Engineering Diagnostics SETUP Move Manufacturer : LG Electronics Inc. Model/Type : 47LD920-ZA Serial No.
WATCHING TV / PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction.
SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Mini Glossary Programme List Displayed when the Locked Programme. 1 BBC 2 BBC 3 BBC Displaying programme LIST A 1 Display the Programme List. LIST A • You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode.
WATCHING TV / PROGRAMME CONTROL FAVOURITE PROGRAMME SETUP A Selecting favourite programme Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without having to wait for the TV to scan through all the in-between programmes. F G Favourite WATCHING TV / PROGRAMME CONTROL Favourite 1 P or 1 2 3 4 5 6 7 8 9 0 2 3 Q.MENU Return to TV viewing. • This will automatically include the selected programme into your favourite programme list.
INPUT LIST HDMI and AV1, 2 (SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using T V / R A D button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. INPUT AV1 AV2 AV3 Component HDMI4 HDMI3 HDMI2 HDMI1 RGB OK Select the input source. • A n t e n n a or C a b l e : Select it when watching the DTV/TV.
WATCHING TV / PROGRAMME CONTROL DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between M H E G ( D i g i t a l T e l e t e x t ) and T e l e t e x t if both exist at the same time. If only one of them exists, either M H E G or T e l e t e x t is enabled regardless of which option you selected.
INPUT LABEL Selects a label for each input source. OPTION Move OK AV1 OPTION Move : English Menu Language : English Audio Language : English Audio Language : English : English Subtitle Language Subtitle Language Hard of Hearing( Country ) : Off : UK Hard of Hearing( Country : English ) : Off : UK Input Label Input Label SIMPLINK Key Lock : On SIMPLINK : Off Key Lock E OK AV2 AV3 Component RGB HDMI1 HDMI2 : On HDMI3 : Off E HDMI4 Close 1 MENU Select OPTION.
WATCHING TV / PROGRAMME CONTROL SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. REMOTE CONTROL KEY FUNCTIONS WATCHING TV / PROGRAMME CONTROL When using the remote control, aim it directly at the TV. OPTION Move OK E Audio Language Subtitle Language WATCHING TV / PROGRAMME CONTROL Hard of Hearing( Country : English : English ) : Off : UK Input Label ꔊQ. MENU ꔈQ.
This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. O f f”.
WATCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. 1 Connect the H D M I / D V I I N 1 ( D V I ), H D M I / D V I I N 2 , H D M I / D V I I N 3 or H D M I I N 4 terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables. (RGB) HDMI / DVI IN 3 2 WATCHING TV / PROGRAMME CONTROL 2 Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables.
SIMPLINK Functions SIMPLINK Menu button and then OK button to select the desired SIMPLINK source. T V v i e w i n g : Switch to the previous TV programme regardless of the current mode. 2 D I S C p l a y b a c k : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game WATCHING TV / PROGRAMME CONTROL 1 AV MODE Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. Off Cinema Game Sport Press the AV MODE button repeatedly to select the desired source.
INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. D a y and N i g h t of the P i c t u r e M o d e cannot be initialized. But the settings of It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. O n", the message to enter the password appears.
TO USE THE 3D VIDEO When using a 3D video 3D video is the technology of using the different view between the two eyes to make the screen on the TV to look as a 3D space. Caution when viewing 3D video G When TO USE THE 3D VIDEO 40 viewing 3D video, watch the TV within effective viewing angle and distance. - If you exceed the viewing angle or distance, you may not be able to view the 3D video. G If you watch the 3D video too closely for a long period of time, it may hurt you eyesight.
TO WATCH TV IN 3D VIDEO Effective viewing angle: Top/Bottom 10 degrees Effective viewing distance: 1.5 m to 5 m 10 1.
TO USE THE 3D VIDEO HOW TO WATCH 3D VIDEO 1 Play the title produced in 3D video. Refer to the following for 3D video input format supported. Signal HDMI Input Resolution Vertical Frequency(Hz) 720p 1280x720 1280x720 45.00 37.50 60.00 50.00 1080i 1920x1080 1920x1080 1920x1080 33.75 28.125 27.00 60.00 50.00 24.00 1920x1080 33.75 30.00 1920x1080 67.50 60.00 1920x1080 56.25 50.
TO USE A USB DEVICE When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated. When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the USB menu. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the U S B on the TV.
TO USE A USB DEVICE PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440 • You can play JPEG files only. • Non-supported files are displayed in the form of predefined icon.
Photo Selection and PopUp Menu Photo List Page 2/3 Drive1 No Marked Up Folder KR103 09/10/2008 KR101 09/10/2008 KR104 09/10/2008 KR102 09/10/2008 KR105 09/10/2008 JMJ001 09/10/2008 JMJ005 09/10/2008 JMJ002 09/10/2008 JMJ006 09/10/2008 JMJ003 09/10/2008 JMJ007 09/10/2008 JMJ004 09/10/2008 JMJ008 09/10/2008 JMJ001 1366x768, 125KB Up Folder Navigation Popup Menu Page 2/3 Drive1 MARK KR101 Up Folder Navigation 1 Popup Menu Exit No Marked Up Folder JMJ001 1366x768, 125
TO USE A USB DEVICE How to view photo Detailed operations are available on full-sized photo view screen.
6 OK Select the Slideshow , B G M, D e l e t e , Option or H i d e. (Rotate), • Use 1/17 Slideshow BGM Delete Option Hide button to select the previous or next photo. • Use button to select and control the menu on the full-sized screen. S l i d e s h o w : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. ■ Set the time interval of the slide show in O p t i o n.
TO USE A USB DEVICE MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 to 320 • Sampling rate MPEG1 Layer3 : 32 kHz, 44.
Music Selection and PopUp Menu As shown, up to 6 music titles are listed per page. Music List Music S003 Duration Title Up Folder S001 S002 00:00/01:34 Up Folder Navigation 3 4 04:28 Page Change MARK Mark Exit No Marked Page 2/3 Title 4395KB 1Kbps Up Folder Up Folder 2 03:23 S005 00:00/01:34 1 01:34 Popup Menu Play S001 Play with Photo S002 Mark All S003 Delete Close S004 04:28 S005 Page Change MARK Mark Select the target folder or drive.
TO USE A USB DEVICE ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. ! NOTE TO USE A USB DEVICE 50 When a music file is played, is displayed behind the title. G A damaged or corrupted music does not play but displays 00:00 in playtime.
MOVIE LIST You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
TO USE A USB DEVICE Screen Components 1 2 MENU Select U S B. OK Select Movie List.
Movie Selection and PopUp Menu Movie List No Marked Page 2/3 movie M003 Duration Title Up Folder M001 M002 M003 1:340, 120KB M004 M005 Up Folder Navigation Popup Menu Movie List Page Change MARK Mark No Marked Page 2/3 movie Up Folder 1366x768, 125KB M001 Play M002 Mark All M003 Up Folder Navigation 1 2 Delete M004 Popup Menu Close M005 Page Change MARK Mark Select the target folder or drive.
TO USE A USB DEVICE Using the Movie List function, play Picture Size F Full G 1 Audio Language Subtitle Language Latin 1 . Sync 0 . Position 0 Close P i c t u r e S i z e : Selects your desired picture format during movie play. G Audio Language & Subtitle Language : Changes the Language Group of the audio/subtitle during movie play. G S y n c : Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of 0.5 secs during movie play.
DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) USB Move OK USB Photo List Photo List Music List Music List Movie List Movie List DivX DivXReg. Reg.Code Code DivX DivX Reg. Reg.
TO USE A USB DEVICE DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in 8 Day Guide Mode Programme Guide 1 YLE TV1 DTV ALL DTV DTV DTV GREEN Enter Date setting mode. 15:00 Kungskonsumente Antigues Roadshow Mint Extra TV2: Farmen The Drum The Drum You Call The Hits Fashion Essentials ... ... ... Tänään otsikoissa 4 TV.. DTV DTV DTV 5 YLE FST 6 CNN DTV DTV DTV DTV DTV DTV 8 YLE24 DTV DTV mode. 14:00 2 YLE TV2 DTV DTV YELLO YELLOW Enter Timer Record/Remind setting 6 Apr. (Fri.) 1 YLE TV1 DTV 6 Apr.
Button Function in Extended Description Box DTV Information Text Up/Down. DTV 6 Apr. 2007 15:09 DTV 6 Apr. 2007 YELLO YELLOW Enter Timer Record/Remind setting mode. INFO or RETURN The detail information on or off. EXIT E GUIDE Switch off EPG. INFO i Info. Exit Schedule Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1 Q.MENU 2 Select A s p e c t R a t i o. T U R E menu.
• 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the E n e r g y S a v i n g l e v e l or by setting the P i c t u r e M o d e. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished. S c r e e n O f f’ while tuned to a radio station channel will reduce power consumption.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Standard Natural Cinema Sport Game Strengthen the contrast, brightness, colour and sharpness for vivid picture. The most general screen display status. The most natural screen display status. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode.
EXPERT PICTURE CONTROL By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos.
PICTURE CONTROL *This feature is not available for all models. Colour Temperature [Advanced Control] (Warm/Medium/Cool) ■ Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish. ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker.
• S t a n d a r d : Mode to reproduce original colour according to the standard of Colour Gamut (Wide/Standard) input signal independent of the display characteristics. • W i d e : Mode to use and set the rich colour area of the display. ■ Maximize the utilization for colour area that can be expressed. Edge Enhancer (Off/Low/High) ■ ■ *This feature is not available for all models. This is the function to express richer colour.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE OK E E • Contrast 90 • Brightness 50 • Brightness 50 • Sharpness 70 • Colour 60 • Sharpness 60 ? All picture setting will be resetted.
POWER INDICATOR It helps you adjust the brightness of moving LED when power is turned on. Standby Light Determines whether to set the indicator light on the front of the TV to O n or O f f in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to O n or O f f when the power turns on.
PICTURE CONTROL DEMO MODE Display the slide show to explain the various logo of this TV. It is not possible to use D e m o M o d e in H o m e U s e mode. In S t o r e D e m o, D e m o M o d e is automatically set to O n. Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o M o d e does not run and only the screen is reset. The screen is reset automatically after 5 minutes in D e m o M o d e.
MODE SETTING H o m e U s e ” mode for the best picture in your home environment. We recommend setting the TV to “H S t o r e D e m o ” mode is an optimal setting for displaying at stores..
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Auto Volume ClearVoice VoiceIIII Clear Move : Off Off : :Off • Level Balance Sound Mode AUDIO OK 3 - + 0 L R MENU Clear Voice II : Off Off Off • Level On 3 - + 0 L R Sound Mode : Standard : Standard • SRS TruSurround XT : Off • SRS TruSurround XT : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound.
SOUND SETTING ADJUSTMENT -USER MODE AUDIO Move Auto Volume Clear Voice II Auto Volume Clear Voice II : Off • Level Balance Sound Sound Mode Mode AUDIO OK : Off 3 - + 0 L R : :Standard Standard (User) Balance Sound Mode 2 3 - 0 L + R Standard Standard (User) ::Standard Standard (User) • Treble 50 Music • SRS TruSurround XT :Cinema Off • Treble 50 Sport • Bass 50 • Bass 50 Game E E MENU OK : Off • Level • SRS TruSurround XT : Off 1 Move : Off Select A U D I O.
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Move Auto Volume Clear Voice II Auto Volume : Off Clear Voice II • Level Balance Balance Sound Mode AUDIO OK : Off 3 - + 0 LL RR : Standard 3 L- Balance 00L L Balance : Standard • SRS TruSurround XT : Off • SRS TruSurround XT : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL MENU Select A U D I O. OK Select B a l a n c e.
TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In A V 1, A V 2, A V 3, C O M P O N E N T, R G B and H D M I 1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
SOUND & LANGUAGE CONTROL DTV AUDIO SETTING (IN DIGITAL MODE ONLY) (This menu is enabled only in Sweden. ) When different audio types exist in an input signal, this function allows you to select the audio type you want.
SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output Dolby Digital if a channel is broadcast with Dolby Digital audio. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move AUDIO OK Move E E • SRS TruSurround XT : Off • SRS TruSurround XT : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 •• Reset Reset i Digital Audio Out : PCM TV Speaker TV Speaker : On Audio Description :On 1 MENU 2 OK SOUND & LANGUAGE CONTROL 3 OK Resetsound mode configuration...
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Q.MENU Select A u d i o. 2 Select the sound output. OK SOUND & LANGUAGE CONTROL 84 Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono.
NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. 1 When NICAM mono is received, you can select N I C A M M O N O or F M M O N O. 2 When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M M O N O.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 OK Select your desired language. OK Select your country. 2 * If you want to change Language/ Country selection 1 Select O P T I O N. MENU 2 OK Select M e n u L a n g u a g e or C o u n t r y. OK Select your desired language or country. 3 4 SOUND & LANGUAGE CONTROL 86 OK Save.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work. TIME Move TIME OK Clock Move OK Clock Off Time : Off On Time : Off Off Time On Time Time On : Off1 Mar.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. 1 Q.MENU 2 Select S l e e p T i m e r. Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 m i n.. • When you switch the TV off, the preset sleep timer is cancelled. • You can also adjust S l e e p T i m e r in the T I M E menu.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. If a channel is locked, enter the password to unlock it temporarily. LOCK Move Lock LockSystem System OK :: Off Off Off ::Off Off Off Set Password Set Password On Block Programme Block Programme : Blocking Off Input Block MENU Move Lock System Parental Guidance 1 LOCK Select L O C K.
PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. O n”. It is available to use this function in L o c k S y s t e m ”O Enter a password to watch a blocked programme.
PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set. Enter a password to watch a blocked programme.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. O n”.
KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
TELETEXT This feature is not available in all countries. AV MODE INPUT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW ENERGY SAVING Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the T . O P T button and then use button to select i menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
APPENDIX TROUBLESHOOTING The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Install new batteries. A The remote control does not work Power is suddenly turned off Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers + or - button. Press the Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust B a l a n c e in menu option. Unusual sound from inside the TV A A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS 47LD9** MODELS Dimensions 47LD920-ZA with stand 1173.4 mm x 789.7 mm x 337.4 mm without stand 1173.4 mm x 723.4 mm x 100.8 mm with stand without stand 23.4 kg 20.8 kg (Width x Height x Depth) Weight Power requirement AC 100-240 V~ 50 / 60 Hz 260 W Power Consumption CI Module Size 100.0 mm x 55.0 mm x 5.
IR CODES *This feature is not available for all models. Code (Hexa) Function 95 08 0B DC F0 45 43 AB 40 41 07 06 44 28 AA 30 02 03 1E 09 00 01 10~19 53 1A 72 71 63 61 20 21 39 7E B1 B0 BA 8F 8E Energy Saving POWER INPUT 3D TV/RAD Q.MENU MENU GUIDE Up ( ) Down ( ) Left ( ) Right ( ) OK( ) RETURN/EXIT INFO i AV MODE + FAV ( MARK ) MUTE P P Number Key 0~9 LIST Q.VIEW RED Key GREEN Key YELLOW Key BLUE Key (L/R SELECT) TEXT T.OPT(T.
APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. (RGB) HDMI / DVI IN 3 2 1(DVI) ANTENNA IN HDMI IN 4 Type of Connector; D-Sub 9-Pin Male No.
Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p .109 OPTION Move OK OPTION E SIMPLINK : On Key Lock : Off Key Lock : Off ::11 Simple Manual Set ID ID Set ::11 Set ID ID Set F Power Indicator Power Indicator Demo Mode : On Demo Mode : On Mode Setting : Store Demo Mode Setting : Store Demo 1 G Close Factory Reset Factory Reset MENU OK E : On Simple Manual 1 Move SIMPLINK Select O P T I O N. 2 OK 3 OK Select S e t I D.
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Command Reference List COMMAND COMMAND DATA 1 2 (Hexadecimal) 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07. Brightness 08. Colour 09. Tint 10. Sharpness 11. OSD Select 12.
01. Power (Command: k a) 0 4 . V o l u m e M u t e (C o m m a n d : k e ) G To control Power On/Off of the set. G To control volume mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust mute using the MUTE button on remote control. Transmission Data 00 : Power Off Ack [k][e][ ][Set ID][ ][Data][Cr] 01 : Power On G To show Power On/Off.
APPENDIX 0 9 . T i n t (C o m m a n d : k j ) G To adjust the screen tint. You can also adjust tint in the PICTURE menu. 13. Treble (Command: k r) G To adjust treble. Transmission You can also adjust treble in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 109. Ack Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 109.
17. Energy Saving (Command: j q) 19.Tune Command (Command: m a) G To reduce the power consumption of the TV. You can also G Select channel to following physical number. adjust Energy Saving in OPTION menu.
APPENDIX 21. Key(Command: m c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 103. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 2 3 . I n p u t s e l e c t (C o m m a n d : x b ) (Main Picture Input) G To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 22. Control Back Light (Command: m g) G To Control the back light.
Open source software notice The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements: GPL EXECUTABLES: • Linux kernel 2.6 • busybox • lzo LGPL LIBRARIES: • uClibc MPL LIBRARIES: • Nanox LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
MOZILLA PUBLIC LICENSE Version 1.1 --------------1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.
(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.
APPENDIX 6.3. Derivative Works.
10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS.
ENGLISH Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : 2 Serial No.