ENG ENGLISH OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 47VX30MF www.lg.
TABLE OF CONTENTS ENGLISH ENG CONTENTS 3 4 LICENSES ASSEMBLING AND PREPARING 4 Unpacking 5 Parts and buttons 6 Portrait Layout 6 Installing on a wall 8 REMOTE CONTROL 34 MAKING CONNECTIONS 35 Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or VCR player 35 - HDMI connection 35 - HDMI/DVI connection 36 - Component connection 36 - AV(CVBS) connection 37 Connecting to the LAN 37 - LAN connection 38 Daisy Chain Monitors 38 - RGB Mode 38 - AV(CVBS) Mode 3
LICENSES 3 Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ASSEMBLING AND PREPARING ENGLISH ENG ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. POWER ENERGY MONITOR INPUT OFF ON .,! GHI PQRS 1/a/A SAVING TUV -*# CLEAR ABC JKL DEF MNO WXYZ MARK ARC PSM P BRIGHT A NESS G E MUTE MENU AUTO BACK TILE S.
ASSEMBLING AND PREPARING 5 Parts and buttons IR Receiver FFC Screen Buttons Screen Marks RS-232C (CONTROL) HDMI / DVI RGB IN AUDIO (RGB/DVI) COMPONENT IN AV IN / OUT OUT IN USB LAN IN RGB OUT VIDEO AUDIO VIDEO AUDIO OUT Connection panel ( See p.35 to p.37 ) Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. ▼▲ Adjust the up and down. ◄► Adjusts the volume level.
ASSEMBLING AND PREPARING Using the FFC/IR PCB Portrait Layout ENGLISH ENG - Only on some models. When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). 1 Remove the securing tape first. 2 Do not pull out the FFC, as this may cause damage. 3 Be careful not to damage the product during installation. Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set.
ASSEMBLING AND PREPARING 3 If you use improper screw, the product might 4 VESA compatible. 5 Please use VESA standard as below. 785mm(31 inch) or greater yy * Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 10 mm (32 inch is Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm) Model 47VX30MF VESA (A x B) Standard screw Number of screws 800 x 600 M6 4 VESA (A x B) yy CAUTION Disconnect the power cord first, and then yy move or install the Monitor set. Otherwise electric shock may occur.
REMOTE CONTROL ENGLISH ENG REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this yy may damage the remote control.
USING THE MONITOR SET ENG ENGLISH POWER ENERGY MONITOR INPUT OFF ON 1 4 7 .,! GHI PQRS 1/a/A 2 5 8 0 SAVING TUV 3 6 9 -*# CLEAR ABC JKL DEF MNO WXYZ MARK ARC PSM POWER P BRIGHT A NESS G E MUTE MENU AUTO BACK TILE S.MENU OK ENERGY MONITOR MENU (See p.13) Accesses the main menus or saves your input and exit menus. .,! GHI PQRS 1/a/A TUV -*# CLEAR ABC JKL DEF MNO WXYZ ARC Navigation buttons Scrolls through menus or options.
USING THE MONITOR SET ENGLISH ENG USING THE MONITOR SET Connecting to a PC Your Monitor set supports the Plug & Play* feature. * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. Using the input list Selecting an input source 1 Press INPUT to access the input source list. - The connected device displays on each input source.
USING THE MONITOR SET 11 HDM/DVI connection Transmits the analog video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the D-sub 15 pin cable as shown the following illustrations. Select RGB input source. Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI/DVI cable as shown the following illustrations. Select HDMI/DVI input source.
USING THE MONITOR SET HDMI connection ENGLISH ENG Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations. Select HDMI/DVI input source. PC (not included) HDMI/DVI Back of the product. NOTE Use a High Speed HDMI™ Cable. yy Please check the PC environment if you yy cannot hear the sound in HDMI mode. Some PCs require you to manually change the default audio output to HDMI.
CUSTOMIZING SETTINGS Accessing main menus 1 MARK ARC PSM Press MENU to access the main menus. P BRIGHT A NESS G E MUTE MENU 2 Press the Navigation buttons to scroll to one of the following menus and S.MENU OK press OK. BACK 3 Press the Navigation buttons to scroll to the setting or option you want AUTO TILE EXIT ID ON OFF and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.14) Adjusts the image size, quality, or effect.
CUSTOMIZING SETTINGS PICTURE settings PICTURE ENGLISH ENG Aspect Ratio 1 Press MENU to access the main menus. Energy Saving 2 Press the Navigation buttons to scroll to PICTURE and Picture Mode press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. Move : 16:9 : Off : Standard • Backlight 70 • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 • Tint 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting Description Customizes the PC display options in RGB mode. Option Resolution Selects a proper resolution. See “Customizing PC display options”. Auto Config. Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position/Size/ Phase Adjusts the options when the picture is not clear, especially when characters are shaky, after the auto configuration.
CUSTOMIZING SETTINGS Advanced image options ENGLISH ENG Setting Colour Temperature Dynamic Contrast Description Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish. Option Cool Sets the screen color to a bluish tone. Medium Sets the screen to the standard color. Warm Sets the screen color to a reddish tone. Adjusts the contrast to keep it at the best level according to the brightness of the screen.
CUSTOMIZING SETTINGS Aspect Ratio CAUTION If a fixed image displays on the screen for a yy long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio is set to 4:3 for a long yy period of time, image burn may occur on the letterboxed area of the screen.
CUSTOMIZING SETTINGS ENGLISH ENG - Zoom : The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. - Cinema Zoom 1 : Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted.
CUSTOMIZING SETTINGS AUDIO settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK. Move Auto Auto Volume Volume Off :: Off Clear Voice II : Off • Level Balance Sound Mode 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. OK 3 0 : Standard • Treble 50 • Bass 50 • Reset - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS TIME settings TIME ENGLISH ENG Clock Clock 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to TIME and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. Move OK : −− : −− −−−− Off Time : Off On Time : Off Sleep Timer : Off Auto Off : On Power On Delay : Off Automatic Standby : On(4hours) - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS OPTION settings OPTION Move Language Input Label English :: English 2 Press the Navigation buttons to scroll to OPTION and press Key Lock : Off Set ID : Off ISM Method : Normal DPM Select : On Power Indicator : ON Interface Select : RS232C OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. Network Setup - To return to the previous level, press BACK. Information Factory Reset 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting ENGLISH ENG Interface Select Description Sets up network connections. Option Network Setup RS-232C Enables communication via Serial. Network LAN - Enables communication via Ethernet. Option DHCP Allocates and sets up IP automatically. Manual Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS. The setup process is complete when you select Execute, and "IP Setup Completed" is displayed at the bottom of the screen.
CUSTOMIZING SETTINGS TILE settings TILE 2 Press the Navigation buttons to scroll to TILE and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. :: 2x2 Off Tile ID :0 Natural Mode : Off H Size :0 V Size :0 H Position : 0 V Position : 0 OK Reset - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS Tile Mode ENGLISH ENG This monitor can be tiled with additional monitors to create a large tiled display.
ENTERTAINMENT 25 Using integrated media features Connecting USB storage devices Connect USB storage devices such as a USB flash memory, external hard drive, or MP3 player to the Monitor set and use multimedia features (“Browsing files” See p.27). Connect a USB flash memory or USB memory card reader to the Monitor set as shown on the following illustration. The USB screen appears.
ENTERTAINMENT ENGLISH ENG recognized as a file name. Please back up the important file because a yy data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage. If the USB is connected in Standby Mode, yy specific hard disk will automatically be loaded when the Set is turned on. The recommended capacity is 1TB or less yy for a USB external hard disk and 32GB or less for USB memory.
ENTERTAINMENT 6 Select a folder you want. Supported file format Type y JPG y Available size Baseline: 64 pixel (W) x 64 pixel (H) 15360 pixel (W) x 8640 pixel (H) Progressive: 64 pixel (W) x 64 pixel (H) 1024 pixel (W) x 768 pixel (H) Music y MP3 y Bit rate range 32 Kbps to 320 Kbps y Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz * A copy-protected file will not play. Video y MPEG1, MPEG2, MPEG4(Doesn't support Microsoft MPEG 4-V2, V3), DivX 3.xx, DivX 4.xx, DivX 5.
ENTERTAINMENT Viewing Photos Using photo options ENGLISH ENG View image files saved in a USB storage device. The displays on the screen may differ from the model. Use the following options while viewing photos. 1 Press the Navigation buttons to scroll to USB and press OK. 2 Press the Navigation buttons to scroll to Photo List and press OK. ◄ 3 Press the Navigation buttons to select Drive1 Slideshow ◘ to access the connected USB storage device.
ENTERTAINMENT Listening to Music 29 7 Control playback by using the following 1 Press the Navigation buttons to scroll to USB and press OK. Button Description Stops playback 2 Press the Navigation buttons to scroll to Music Plays a music file List and press OK. Pauses or resumes playback 3 Select Drive1 to access the connected USB Skips to the next file storage device. Skips to the previous file 4 Press the Navigation buttons to scroll to a folder you want and press OK.
ENTERTAINMENT Viewing Movies ENGLISH ENG Play video files on the Monitor set. Your Monitor set displays all of the video files saved in a USB storage device. Movie (*.dat / *.mpg / *.mpeg / *.vob/ *.m4v / yy *.avi / *.divx) supporting file. Video format: MPEG1, MPEG2, yy MPEG4(Doesn’t support Microsoft MPEG 4-V2, V3), DivX 3.xx, DivX 4.xx, DivX 5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback) Audio format: Mpeg, Mp3, PCM yy Bit rate: within 32 kbps to 320 kbps (MP3) yy Subtitle format: *.smi / *.
ENTERTAINMENT 1 Press the Navigation buttons to scroll to USB ENG ENGLISH and press OK. 2 Press the Navigation buttons to scroll to Movie List and press OK. 3 Select Drive1 to access the connected USB storage device. 4 Press the Navigation buttons to scroll to a Option folder you want and press OK. 5 Press the Navigation buttons to scroll to a file Picture Size you want and press OK. A pop-up window will appears.
ENTERTAINMENT 1 Press the Navigation button to show the ENGLISH ENG Picture Size, Audio Language or Subtitle Language. When you select the Set Video. 1 Press the Navigation button to make appropriate adjustments. See p.8 2 Press the Navigation button to make appropriate adjustments.
ENTERTAINMENT 33 Deactivating the DivX feature Check and register the DivX registration code of your Monitor set so that you can rent or purchase the latest movies at www.divx.com/vod . To play a rented or purchased DivX file, the file’s registration code should be same with your Monitor set’s DivX registration code. Deactivate all of the devices through the web server and block devices from activating.
MAKING CONNECTIONS MAKING CONNECTIONS ENGLISH ENG Connect various external devices to the ports on the Monitor set’s back panel. 1 Find an external device you want to connect to your Monitor set shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver HDMI - See p.35 DVI - See p.35 AV(CVBS) - See p.36 Component - See p.36 DVD VCR HDMI - See p.35 DVI - See p.35 AV(CVBS) - See p.
MAKING CONNECTIONS Connect a HD receiver, DVD, or VCR player to the Monitor set and select an appropriate input mode. HDMI/DVI connection Transmits the digital video signal from an external device to the Monitor set. Connect the external device and the Monitor set with the HDMI/DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. HDMI connection Transmits the digital video and audio signals from an external device to the Monitor set.
ENGLISH ENG N 36 MAKING CONNECTIONS Component connection AV(CVBS) connection Transmits the analog video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. Transmits the analog video and audio signals from an external device to the Monitor set.
MAKING CONNECTIONS 37 Connecting to the LAN Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM. For more information about the program, please refer to eZ-Net Guide in the enclosed CD-ROM. A Connect PC to Monitor directly. LAN PC Monitor Set B Using a router(Switch) LAN Switch Monitor Set PC Network C Using the Internet.
MAKING CONNECTIONS Daisy Chain Monitors ENGLISH ENG Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box.
TROUBLESHOOTING 39 No image is displayed Problem Resolution Is the product power cord connected? yy See if the power cord is properly connected to the outlet. Is the power indicator light on? yy See if the power switch is turned on. yy May need service. yy Adjust brightness and contrast again. yy Backlight may need repair. ower is on, power indicator P is blue but the screen appears extremely dark.
TROUBLESHOOTING ENGLISH ENG 'Key Lock On' message appears. Problem The 'Key Lock On' message appears when pressing the Menu button. Resolution y y The Lock function prevents the OSD settings from being changed inadvertently. To release the lock, go to Menu and Option and disable the Key Lock option. The screen image looks abnormal.
TROUBLESHOOTING 41 Problem No sound? Sound is too dull. Sound is too low. Resolution yy See if the audio cable is connected properly. yy Adjust the volume. yy See if the sound is set properly. yy Adjust the Clear Voice ll, Treble and Bass appropriately. yy Adjust the volume. Screen color is abnormal. Problem Resolution Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select (16 colors).
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS LCD Panel Screen Type Video Signal Pixel Pitch Max. Resolution 1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.8 mm 0.5415 mm (H) x 0.5415 mm (V) RGB : 1920 X 1080 @ 60 Hz HDMI/DVI : 1920 X 1080 @ 60 Hz - It may not be supported depending on the OS or video card type.
SPECIFICATIONS 43 DTV Mode RGB (PC) supported mode Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution Component HDMI/DVI (DTV) 640 x 350 31.469 70.8 480i o x o x 720 x 400 31.468 70.8 576i 640 x 480 31.469 59.94 480p o o 640 x 480 37.5 75 576p o o 800 x 600 37.879 60.317 720p o o 800 x 600 46.875 75 1080i o o 832 x 624 49.725 74.55 1080p o o 1024 x 768 48.363 60 1024 x 768 60.123 75.029 1280 x 720 44.772 59.855 1280 x 768 47.
IR CODES IR CODES ENGLISH ENG This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP Use this method to connect several products to a single PC. You can control several products at a yy time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 99 without being duplicated. yy Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the yy product on/off, select an input source or adjust the OSD menu from your PC.
EXTERNAL CONTROL DEVICE SETUP Command reference list ENGLISH ENG COMMAND DATA 1 2 1 01. Power k a 00H to 01H 02. Input Select k b 02H to 09H 03. Aspect Ratio k c 01H to 1FH 04. Screen Mute k d 00H to 01H 05. Volume Mute k e 00H to 01H 06. Volume Control k f 00H to 64H 07. Contrast k g 00H to 64H 08. Brightness k h 00H to 64H 09. Color k i 00H to 64H 10. Tint k j 00H to 64H 11.
EXTERNAL CONTROL DEVICE SETUP DATA 1 2 1 39. Sleep Time f f 00H to 08H 40. Auto Sleep f g 00H to 01H 41. Power On Delay f h 00H to 64H 42. Language f i 00H to 09H 43. DPM Select f j 00H to 01H 44. Reset f k 00H to 02H 45. Power Saving f l 00H to 03H 46. Power Indicator f o 00H to 01H 47. Serial no. f y FFH 48. S / W Version f z FFH 49.
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol ENGLISH ENG Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. (k, j, m, d, f, x) * [Command 2]: Second command.(a to u) * [Set ID]: Set up the Set ID number of product. range : 01H to 63H. by setting '0', server can control all products. * In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack message.
EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Data 00 : Power Off Data 01 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show the status of Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Acknowledgement [a][ ][Set ID][ ][OK][Data][x] Data 00 : Power Off Data 01 : Power On 03. Aspect Ratio (Command: k c) To adjust the screen format.
EXTERNAL CONTROL DEVICE SETUP 05. Volume Mute (Command: k e) To control On/Off of the Volume Mute. ENGLISH ENG Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume Mute On (Volume Off) 01 : Volume Mute Off (Volume On) Acknowledgement [e][ ][Set ID][ ][OK][Data][x] Data 00 : Volume Mute On (Volume Off) 01 : Volume Mute Off (Volume On) 08. Brightness (Command: k h) To adjust screen brightness. You can also adjust the brightness in the Picture menu.
EXTERNAL CONTROL DEVICE SETUP Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00H to Max : 64H (Hexadecimal code) * Refer to 'Real data mapping ’. See p.50 14. Balance (Command: k t) To adjust the sound balance.
EXTERNAL CONTROL DEVICE SETUP 17. ISM mode (Command: j p) Used to select the afterimage preventing function. ENGLISH ENG Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 01 : Inversion 02 : Orbiter 04 : White Wash 08 : Normal Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 20. Tile Mode (Command: d d) Change a Tile Mode. Transmission [d][d][ ][Set ID][ ][Data][Cr] Data Description 00 or 11 12 13 14 Tile mode is off. 1 x 2 mode (column x row) 1 x 3 mode 1 x 4 mode ... 1 x 2 mode ...
EXTERNAL CONTROL DEVICE SETUP 23. Tile H Size (Command: d g) To set the Horizontal size. Data Min : 00H to Max : 64H * Refer to 'Real data mapping ’. See p.50 Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 24. Tile V Size (Command: d h) To set the Vertical size. Transmission [d][h][ ][Set ID][ ][Data][x] Data Min : 00H to Max : 64H * Refer to 'Real data mapping ’. See p.50 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 26.
EXTERNAL CONTROL DEVICE SETUP 29. Fan Fault check (Command: d w) To check the Fan fault of the Set. ENGLISH ENG Transmission [d][w][ ][Set ID][ ][Data][x] * The data is always FF (in Hex). Data ff : Read Status Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] * Data is the status value of the Fan fault. Data 00 : Fan fault 01 : Fan Ok 02 : N/A (Not Avaliable) 30. Elapsed time return (Command: d l) To read the elapsed time. Transmission [d][l][ ][Set ID][ ][Data][x] * The data is always FF(in Hex).
EXTERNAL CONTROL DEVICE SETUP 35. Time (Command: f a) Set the current time. [Data1] 00 : Monday 01 : Tuesday 02 : Wednesday 03 : Thursday 04 : Friday 05 : Saturday 06 : Sunday [Data2] 0H to 17H (Hours) [Data3] 00H to 3BH (Minutes) Acknowledgement [a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] *When reading data, FFH is inputted for [Data1], [Data2] and [Data3]. In other cases, all are treated as NG. 36. On Timer (On/Off Timer) Time (Command: f d) Set On Timer.
EXTERNAL CONTROL DEVICE SETUP 37. Off Timer (On/Off Timer) Time (Command: f e) Set Off Timer. ENGLISH ENG Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [Data 1] 1. f1h to f4h(read one index) f1: read 1st index of Off Time List, f2: read 2nd index of Off Time List f3: read 3rd index of Off Time List f4: read 4th index of Off Time List 2.
EXTERNAL CONTROL DEVICE SETUP 39. Sleep Time (Command: f f) Set Sleep Time. Data 00 : Off 01 : 10 02 : 20 03 : 30 04 : 60 05 : 90 06 : 120 07 : 180 08 : 240 Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 40. Auto Sleep (Command: f g) Set Auto Sleep. Transmission [f][g][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : On Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 41. Power On Delay (Command: f h) Set the schedule delay when the power is turned on (Unit: second).
EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 45. Power saving (Command: f l) To set the Power saving mode. 48. S/W Version (Command: f z) Check the software version. Transmission [f][l][ ][Set ID][ ][Data][Cr] Transmission [f][z][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : static level 1 02 : static level 2 03 : static level 3 Data FFH : Read Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 46.
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary noise is normal when powering ON or OFF this device.
