ENG ENGLISH OWNER’S MANUAL SIGNAGE DISPLAY Please read this manual carefully before operating the your set and retain it for future reference. SIGNAGE DISPLAY MODELS 47WV30 www.lg.
TABLE OF CONTENTS ENGLISH ENG CONTENTS 4 ASSEMBLING AND PREPARING 23 Adjusting the screen 23 - Selecting an image mode 4 Unpacking 23 - Customizing image options 5 Parts 24 - Customizing PC display options 6 To install in a Portrait Layout 24 Adjusting the sound 6 Remove L-brackets before Installation 24 - Selecting an sound mode 7 Moving Handles 25 - Customizing sound options 7 - Moving the device in a vertical position 25 Using additional options 7 - Moving the device i
TABLE OF CONTENTS Connecting to the LAN 51 - LAN connection 52 Daisy Chain Monitors 52 - RGB Cable 52 - DVI Cable 53 TROUBLESHOOTING 53 General 55 SPECIFICATIONS 57 RS-232 CONTROL 67 LICENSE NOTE The following three phenomena may occur due to the characteristics of the Super Narrow Bezel yy LCD. They are not related to the display's performance. 1. The edges of the screen may become darker or shadows may appear. 2. Light leakage may occur depending on the viewing angle. 3.
ASSEMBLING AND PREPARING ENGLISH ENG ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. Power Cord RGB Cable DVI Cable CD (Owner's Manual) / Card POWER ENERGY MONITOR INPUT OFF ON .
ASSEMBLING AND PREPARING 5 Parts ENG ENGLISH RS-232C (CONTROL) DVI OUT DVI IN /DVI USB RGB OUT AUDIO (RGB/DVI) LAN AUDIO SPEAKER (8Ω) RGB IN REMOTE CONTROL IN COMPONENT IN Connection panel (See p.50 to p.
ASSEMBLING AND PREPARING To install in a Portrait Layout ENGLISH ENG When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. NOTE Keep the removed L-brackets and use them when moving the monitor later.
ASSEMBLING AND PREPARING 7 Moving Handles Moving the device in a horizontal position Hold the vertical handles on the left and right sides or the left and right handles on the back of the display. Have the screen facing down and hold the vertical handles on the left and right sides.
ASSEMBLING AND PREPARING STORAGE METHOD FOR PANEL PROTECTION ENGLISH ENG Correct Method Incorrect Method Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor. Panel If the product is tilted onto the bezel, the bottom of the panel may be damaged. Cushion Panel When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down.
ASSEMBLING AND PREPARING Installing on a wall CAUTION 10 cm 20 cm 10 cm 10 cm If you want to mount the monitor on the wall (optional), attach the wall mounting bracket to the rear of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. Use the wall mount plate and screws that comply with the VESA standard. Use the wall mount plate and screws conforming to the VESA standard. NOTE Do not install the product in a place with no ventilation (e.g.
ASSEMBLING AND PREPARING EXTERNAL EQUIPMENT SETUP ENGLISH ENG IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232 cable. Refer to page 19 for more information.
ASSEMBLING AND PREPARING 11 Tiling Displays ENG ENGLISH How to Join Sets - Installing Set 1 *Example of 2 x 2 tiling * The numbers assigned in this example (#1, #2, #3, #4) are used to demonstrate the installation procedure to ensure it is easy to follow. These numbers have nothing to do with the Set ID that is used to operate the remote control. Set the guide bracket into the bracket groove using screws and mount the set to the wall mount plate or the wall.
ASSEMBLING AND PREPARING How to Join Sets - Installing Set 2 ENGLISH ENG Join Set 2 to Set 1 using the guide brackets on the top side of Set 1 and mount the two sets to the wall mount plate or the wall. Remove the guide brackets after mounting the sets.
ASSEMBLING AND PREPARING 13 How to Join Sets - Installing Set 3 #2 #1 #3 Minimize the space between the sides of the sets using the U-shaped fixture. When the sets are joined with the minimum amount of space between them, firmly mount them to the wall mount plate or the wall. When the sets are firmly mounted to the wall, remove the U-shaped fixtures.
ASSEMBLING AND PREPARING How to Join Sets - Installing Set 4 ENGLISH ENG Loosely mount Set 4 to the wall mount plate or the wall and minimize the space between the sets using the U-shaped fixtures. When Set 4 is firmly mounted to the wall, remove the U-shaped fixtures. Remove the guide brackets. See . Now the 2 x 2 tiling is complete. You can tile in various combinations, such as 3 x 3.
ASSEMBLING AND PREPARING 15 Inserting the Cable Holder As illustrated, screw the power cable holder into the hole on the bottom rear of the set to hold the power cables together. (This is to put the power cables inside the holder.) ENG ENGLISH As illustrated, insert two cable holders into the holes at the bottom rear of the set to organize the cable bundles.
REMOTE CONTROL ENGLISH ENG REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. POWER To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. ENERGY MONITOR INPUT OFF ON 1 4 7 .
REMOTE CONTROL POWER ENERGY MONITOR INPUT OFF ON 1 4 7 .,! GHI PQRS 1/a/A 2 5 8 0 SAVING TUV 3 6 9 -*# CLEAR ABC JKL DEF MNO WXYZ MARK ARC ENERGY MONITOR MENU(See p.41) Selects a menu. Clears all on-screen displays and returns to Set viewing from any menu. Up/Down/Left/Right Allows you to navigate the on-screen menus and adjust the system settings to your preference. .,! GHI PQRS 1/a/A ID ON/OFF Allows you to set the Picture ID or turn it off.
.,! DEF .,! ABC DEF 1/a/A 1/a/A CLEAR CLEAR Displaying the device name connected to an input port 18 ABC GHI REMOTE CONTROL PQRS JKL MNO GHI JKL MNO TUV WXYZ PQRS TUV WXYZ -*# -*# MARK MARK ARC ENGLISH ENG PSM ARC BRIGHT NESS P A G E MUTE Display which devices are connected to which external input ports. AUTO MENU S.MENU 1 Access the Input list screen and press the blue (input label) button onOKthe remote control.
REMOTE CONTROL 19 Picture ID POWER 1 ENERGY SAVING RS232C 1/a/A CLEAR ABC DEF GHI JKL MNO PQRS TUV 2 Picture ID Off Close WXYZ -*# P BRIGHT A NESS G E 4 MUTE 2X2 Multi-Vision (Total Set ID: 4) Set IDs are assigned as shown in the picture. AUTO S.MENU 1 Press the red ON button on the remote control to assign the PictureOKID.
USING THE MONITOR SET ENGLISH ENG USING THE MONITOR SET Connecting to a PC RGB connection NOTE It is recommended to you use an HDMI yy connection for the best image quality. Transmits an analog video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the D-sub 15 pin cable as shown the following illustrations. PC CAUTION Connect the signal yy input cable and tighten it by turning the screws clockwise.
USING THE MONITOR SET 21 HDMI connection Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the DVI to DVI cable as shown the following illustrations. Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations. When using computer input with HDMI, you must set the label of that HDMI input to PC.
USING THE MONITOR SET ENGLISH ENG Audio connection IR Receiver connection Transmits the audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the Audio cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the Monitor set with an Audio connection. Allows the use of a wired remote or IR receiver extension.
USING THE MONITOR SET Customizing image options Selecting an image mode Customize basic and advanced options of each image mode for the best screen performance. Display images using optimized settings by selecting one of the preset image modes. 1 Press MENU to access the main menus. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to Picture Mode and press OK.
USING THE MONITOR SET ENGLISH ENG Advanced Customizes the advanced options. Control See more information about advanced options See p.43. Picture Restores the options to the default Reset setting. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. Adjusting the sound Selecting an sound mode Play the sound in its optimized settings by selecting one of the preset sound modes. 1 Press MENU to access the main menus.
USING THE MONITOR SET 25 Using additional options Customize options of each sound mode for the best sound quality. Adjusting aspect ratio 1 Press MENU to access the main menus. Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. 2 Press the Navigation buttons to scroll to AUDIO and press OK. 3 Press the Navigation buttons to scroll to Sound Mode and press OK.
USING THE MONITOR SET ENGLISH ENG - 16:9: The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs). - Zoom: The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
ENTERTAINMENT 27 Connecting to a wired network (Depending on model) Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. 47WV30 only supports wired network connection. After making a physical connection, a small number of home networks may require the display network settings to be adjusted. For most home networks, the display will connect to automatically without any adjustments.
ENTERTAINMENT NOTE ENGLISH ENG yy If you want to access the Internet directly on your display, the internet connection should always be on. yy If you cannot access the Internet, check the network conditions from a PC on your network. yy When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yy If you do not complete the network settings, the network may not work properly.
ENTERTAINMENT Connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features (See "Browsing files" on page 30). Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My media screen appears. or CAUTION yy Do not turn the display off or remove a USB storage device while EMF(my media) Menu is activated, as this could result in loss of files or damage to the USB storage device.
ENTERTAINMENT ENGLISH ENG yy If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source. yy If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.
ENTERTAINMENT Supported file format Supported file format DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV, TS,TRP,TP,ASF,WMV,FLV) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*. vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*. wmv/*.flv/*.avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.
ENTERTAINMENT 6 Control playback by using the following buttons. Page 1/1 Movie List ENGLISH ENG Drive1 USB External 001 002 005 006 Page 1/1 003 004 ► Move Change Numbers To Photo list View Page Change ■ ◄► ► II ◄◄ 01:02:30 / 02:30:25 ►► Q.MENU Option Hide Exit Exit Mark Mode Page 1/1 Movie List Mark Mode Drive1 USB External 001 002 005 Page 1/1 003 004 051. Apple_ ......
ENTERTAINMENT Tips for using playing video files When you are watching the movie by Movie yy List function, you can adjust an image by Energy Saving key on the remote control. User setup for each image mode does not operate. Video options 1 Press MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Set Video Play., Set Video. or Set Audio. and press OK. NOTE yy Option values changed in Movie List does not affect Photo List and Music List.
MAINTENANCE When you select the Set Video Play,, Repeat Turn on/off repeat function of ENGLISH ENG movie playback. When turned on, the 1 Press the Navigation buttons to scroll to show file within the folder will be played the Picture Size, Audio Language, Subtitle Language or Repeat. back repeatedly. Even when the repeated playback 2 Press the Navigation buttons to scroll to make is turned off, it can run the playback if appropriate adjustments.
MAINTENANCE When you select the Set Video,, appropriate adjustments. Page 1/1 Photo List USB External 001 Drive1 002 010 011 Page 1/1 003 004 005 006 012 013 014 015 When you select the Set Audio,, Move Change Numbers To Music List View 008 009 PAGE Page Change Exit Mark Mode 1 Press the Navigation buttons to scroll to show the Sound Mode, Clear Voice II or Balance.
MAINTENANCE Using photo options Press the ENERGY SAVING button repeatedly to change the brightness of your screen. Option yy Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). yy BGM: Selects a music folder for the background music. Use the following options while viewing photos. 01_a.jpg 2008/12/10 1920 x 1080 479 KB NOTE ◄ ◄ ENGLISH ENG ENERGY SAVING ◄ Slideshow ► BGM Options ■ yyYou cannot change the music folder while the background music is playing.
MAINTENANCE When you select the Set Photo View, 37 Listening to music Slide Speed or BGM.. 2 Press the Navigation buttons to scroll to make appropriate adjustments. 1 Press the Navigation buttons to scroll to My Media and press OK. 2 Press the Navigation buttons to scroll to Music List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK. When you select the Set Video, 1 Press the Navigation buttons to scroll to make appropriate adjustments.
MAINTENANCE 6 Control playback by using the following buttons. ENGLISH ENG This unit cannot support the ID3 Tag yy embedded MP3 files. Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 ► 004. - B04.mp3 00:00 005. - B05.mp3 00:00 005. - B05.mp3 ■ ► II ◄◄ Button ►► ► 006. - B06.mp3 00:00 007. - B07.mp3 00:00 ◄► Q.
MAINTENANCE Music options 2 Press the Navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK. NOTE yy Option values changed in Movie List does not affect Photo List and Music List. yy Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List. DivX registration code Registering the DivX code Check and register the DivX registration code of your display so that you can rent or purchase the latest movies at www.divx.com/vod.
MAINTENANCE Deactivating the DivX feature ENGLISH ENG Deactivate all of the devices through the web server and block devices from activating. Delete the existing authentication information to receive a new DivX user authentication for the display. Once this function is executed, a DivX user authentication is required again to see DivX DRM files. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press OK. 3 Press the Blue button.
CUSTOMIZING SETTINGS ENG ENGLISH CUSTOMIZING SETTINGS Accessing main menus 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.42) Adjusts the image size, quality, or effect PICTURE OPTION AUDIO (See p.
CUSTOMIZING SETTINGS PICTURE settings PICTURE ENGLISH ENG 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and Move • Aspect Ratio : 16:9 • : Off Energy Saving • Picture Mode OK ꔋ : Standard • Backlight 50 • Contrast 50 • Brightness 50 • Sharpness 50 option you want and press OK. • Color 50 - To return to the previous level, press BACK. • Tint 0 R G • Color Temp. 0 W C press OK.
CUSTOMIZING SETTINGS 43 Basic image options Description djusts the brightness of the screen by controlling the LCD backlight. If you decrease the A brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture.
CUSTOMIZING SETTINGS AUDIO settings AUDIO ENGLISH ENG • Clear Voice II 1 Press MENU to access the main menus. Move • Balance 2 Press the Navigation buttons to scroll to AUDIO and press • Sound Mode OK : Off ꔋ 0 L R : Standard • Infinite Sound: Off OK. 3 Press the Navigation buttons to scroll to the setting or • Treble 50 • Bass 50 • Reset option you want and press OK. • Speaker : On - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS TIME settings TIME Move • Clock • Off Time : Off 2 Press the Navigation buttons to scroll to TIME and press OK. • On Time : Off • Sleep Timer : Off 3 Press the Navigation buttons to scroll to the setting or option • Power On Delay : Off OK ꔋ you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS OPTION settings OPTION ENGLISH ENG 1 Press MENU to access the main menus. • Menu Language 2 Press the Navigation buttons to scroll to OPTION and press • Factory Reset • ISM Method OK. Move OK ꔋ : Normal • Set ID • Tile Mode • FAN 3 Press the Navigation buttons to scroll to the setting or • Product/Service Info. option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting FAN Description Setting Tile Mode You can display the image on multiple sets and view it in a larger size. To use the Tile Mode on multiple sets with same signal. Auto Config. This option optimizes the screen when you connect the set to a new computer or change to a different mode. If you are not satisfied with the adjustment, you can manually change the "Position" or "Size". Position You can set the position. Size You can set the size.
CUSTOMIZING SETTINGS NETWORK settings NETWORK ENGLISH ENG 1 Press MENU to access the main menus. Move • Network Setting : Wired • Network Status : Not connected 2 Press the Navigation buttons to scroll to NETWORK and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
MAKING CONNECTIONS 49 Connect various external devices to the ports on the Monitor set’s back panel. 1 Find an external device you want to connect to your Monitor set shown in the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver HDMI - (See p.50) Component - (See p.51) DVD HDMI - (See p.50) Component - (See p.51) Speaker USB Memory storage - (See p.51) Memory card reader - (See p.
MAKING CONNECTIONS ENGLISH ENG Connecting to a HD receiver, DVD or VCR player Connect a HD receiver, DVD, or VCR player to the Monitor set and select an appropriate input mode. HDMI connection DVI - HDMI connection Transmits the digital video signal from an external device to the Monitor set. Connect the external device and the Monitor set with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable.
MAKING CONNECTIONS Connecting to the LAN AV connection LAN connection Connect the LAN cable. A Using a router(Switching Hub) PC LAN Switching Hub Product PC (not included) B Using the Internet. AUDIO (RGB/DVI) Connecting to a USB Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the Monitor set and access the USB menu to use various multimedia files. "Connecting USB storage devices" on See p.29 and “Browsing files” on See p.
MAKING CONNECTIONS Daisy Chain Monitors ENGLISH ENG Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box.
TROUBLESHOOTING 53 ENG ENGLISH TROUBLESHOOTING General No image is displayed Problem Resolution Is the product power cord connected? yy See if the power cord is properly connected to the outlet. oes the 'Invalid Format' message D appear? yy The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual.
TROUBLESHOOTING The screen image looks abnormal. Problem Resolution yy D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. yy See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu.
SPECIFICATIONS 55 LCD Panel Video Signal Screen Type 1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.8 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Max.
SPECIFICATIONS PC supported mode ENGLISH ENG Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution 1 720 x 400 31.468 70.8 *2 640 x 480 31.469 59.94 *3 800 x 600 37.879 60.317 49.725 74.55 4 832 x 624 *5 1024 x 768 48.363 60 *6 1280 x 720 44.772 59.855 *7 1360 x 768 47.72 59.799 *8 1366 x 768 47.71 59.79 *9 1280 x 1024 63.981 60.
RS-232 CONTROL ENG ENGLISH RS-232 CONTROL You can control several products at a time by connecting them to a single PC. yy In the Option menu, Set ID must be between 1 and 225 without being duplicated. yy Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the yy product on/off, select an input source or adjust the OSD menu from your PC. This monitor features two RS-232 ports.
RS-232 CONTROL Command Reference List ENGLISH ENG COMMAND DATA 1 2 01. Power k a 00 to 01 02. Input Select x b refer to 02. Input Select 03. Aspect Ratio k c refer to 03. Aspect Ratio 04. Volume Mute k e 00 to 01 05. Volume Control k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08. Color k i 00 to 64 09. Tint k j 00 to 64 10. Sharpness k k 00 to 64 11. OSD Select k l 00 to 01 12. Treble k r 00 to 64 13. Bass k s 00 to 64 14.
RS-232 CONTROL 59 Transmission / Receiving Protocol DATA 2 39. Serial No. Check f y FF 40. S/W Version f z FF 41. Tile Matrix d k 11 to FF 42. Tile ID d i Refer to 42. Tile ID Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1]: First command to control the set. yy [Command 2]: Second Command to control the set. yy [Set ID]: S et ID wants to communicate with the set. Command for test is 00. yy [DATA]: Information passed to the set. yy [Cr]: Carriage Return.
RS-232 CONTROL Transmission / Receiving Protocol ENGLISH ENG 01. Power (Command : k a) To control Power On / Off of the display. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] 04. Volume Mute (Command : k e) To select screen mute on/off.
RS-232 CONTROL Transmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Color (Command: k i) To adjust screen color. You can also adjust contrast in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data 00 to 64: Color 0 to 100 Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) To adjust screen tint. You can also adjust contrast in the PICTURE menu.
RS-232 CONTROL ENGLISH ENG 15. Color Temperature (Command: x u) To adjust color temperature. You can also adjust color temperature in the Picture menu. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data 00 to 64: Warm 50 to Cool 50 Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 16. ISM Method (Command: j p) To select ISM method for avoiding having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 04: White Wash 08.
RS-232 CONTROL 23. Tile H Size (Command: d g) To set the Horizontal size. Data 00 to 64: Min to Max Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 27. Elapsed Time Return (Command: d l) To read the panel used time. Transmission [d][l][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] * Returned data means used hours in hexadecimal. 24.
RS-232 CONTROL 31. Language (Command: f i) To set language for OSD. ENGLISH ENG Transmission [f][i][ ][Set ID][ ][Data][Cr] Data 00: Korean 01: Chinese 02: Japanese 03: English 04: French 05: German 06: Italian 07: Portuguese 08: Spanish(EU) 09: Russian 34. V Position (Command: f r) To set the Vertical position. * This function only works in Tile Off mode.
RS-232 CONTROL Transmission [d][w][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] 40. S/W Version (Command: f z) To read the software version. Transmission [f][z][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Data 00: Abnormal State 01: Normal State 41.
RS-232 CONTROL IR CODE (Hex) Function Remark ENGLISH ENG 08 POWER Remocon Botton C4 MONITOR ON Remocon Botton C5 MONITOR OFF Remocon Botton 95 Evergy Saving Remocon Botton 0B INPUT Remocon Botton 10 Number 0 Remocon Botton 11 Number 1 Remocon Botton 12 Number 2 Remocon Botton 13 Number 3 Remocon Botton 14 Number 4 Remocon Botton 15 Number 5 Remocon Botton 16 Number 6 Remocon Botton 17 Number 7 Remocon Botton 18 Number 8 Remocon Botton 19 Number 9 Remocon
LICENSE 67 A different license is supported depending on the model. Visit www.lg.com for more information on the license. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL E N E RGY STA R i s a s et of p owe rsaving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
