OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating your set and retain it for future reference. MONITOR SIGNAGE MODELS 47WV50BR 47WV50MS 47WV50BS www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 4 LICENSES 22 - Customizing Sound Options 22 Using Additional Options 22 - Adjusting Aspect Ratio 24 - Using the Input List 5 ASSEMBLING AND PREPARING 5 Accessories 25 ENTERTAINMENT 6 Parts 7 To Install in a Portrait Layout 25 - Connecting to a Wired Network 7 Remove L-brackets before Installation 26 - Network Status 8 STORAGE METHOD FOR PANEL 27 - Connecting USB Storage Devices 28 - Browsing Files 30 - Viewing Movies 33
TABLE OF CONTENTS Daisy Chain Monitors 58 - RGB Cable 58 - DVI Cable 59 TROUBLESHOOTING 62 SPECIFICATIONS 65 IR CODES 66 CONTROLLING THE MULTIPLE PRODUCT 66 Connecting the cable 66 RS-232C Configurations 66 Communication Parameter 67 Command Reference List 69 Transmission / Receiving Protocol NOTE Product damage from moving or changing the installation location is not covered by warranty.
LICENSES ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.
ASSEMBLING AND PREPARING 5 Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD (Owner's Manual, SuperSign Elite-c Program/ SuperSign Manual) / Cards Power Cord IR Receiver DVI Cable (*SuperSign Elite-w : It may not be supported depending on the model.
ASSEMBLING AND PREPARING Parts ENGLISH ENG < 47WV50BR / 47WV50MS > USB DP /DVI DVI IN DVI OUT RGB /COMPONENT OUT AUDIO IN LAN COMPOSITE SPEAKER RGB /COMPONENT IN REMOTE CONTROL IN Connection panel < 47WV50BS > USB DP /DVI DVI IN DVI OUT RGB /COMPONENT OUT AUDIO IN RGB /COMPONENT IN REMOTE CONTROL IN Connection panel LAN SPEAKER
ASSEMBLING AND PREPARING 7 To Install in a Portrait Layout Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. NOTE Keep the removed L-brackets and use them when moving the monitor later. yy ENG ENGLISH When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
ASSEMBLING AND PREPARING STORAGE METHOD FOR PANEL PROTECTION ENGLISH ENG Correct Method Incorrect Method Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor. Panel If the product is tilted onto the bezel, the bottom of the panel may be damaged. Cushion Panel When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down.
ASSEMBLING AND PREPARING Installing on a Wall CAUTION 10 cm 20 cm 10 cm 10 cm Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. Use the wall mount plate and screws that comply with the VESA standard. NOTE Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion.
ASSEMBLING AND PREPARING Securing the product to a wall (optional) ENGLISH ENG (Depending on model) 1 Insert and tighten the eye-bolts, or product brackets and bolts on the back of the product. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the product. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
ASSEMBLING AND PREPARING 11 EXTERNAL EQUIPMENT SETUP This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable.
ASSEMBLING AND PREPARING Tiling Displays ENGLISH ENG How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
ASSEMBLING AND PREPARING 13 How to Join Sets Join other sets using screws for fixing the VESA wall mount in the same way as above. Set 4 joined to the rest of the sets (2 x 2 tiling) 2 After joining the sets, use the tiling guide to adjust the gap between the sets. 3 Now the 2 x 2 tiling is complete. You can tile in various combinations, such as 3 x 3. NOTE The load applied to each set should be supported by the wall mount plate or the wall using a VESA yy wall mount (600 x 400).
REMOTE CONTROL ENGLISH ENG REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this yy may damage the remote control.
REMOTE CONTROL 15 ENG ENGLISH INFO ⓘ Displays the input information. SETTINGS Accesses the main menus or saves your input and exit menus. OK Selects menus or options and confirms your input. AUTO Automatically adjusts picture position and minimizes image instability.(RGB input only) W.BAL Enters the White Balance menu. S.MENU (SuperSign Menu Key) This button does not apply to this model. Navigation Buttons Scrolls through menus or options.
REMOTE CONTROL Displaying the Device Name Connected to an Input Port ENGLISH ENG Display which devices are connected to which external input ports. 1 Access the Input list screen and press the blue (input label) button on the remote control. 2 You can assign an input label for every input except USB.
USING THE MONITOR SET 17 Connecting to a PC RGB Connection Your Monitor set supports the Plug & Play* feature. Transmits the analog video signal from your PC to the monitor set. Connect the PC and the Monitor set with the 15-pin signal cable as shown the following illustrations. Select RGB input. * Plug & Play: A PC will have a built-in driver for the monitor, no extra software is needed. Back of the product.
USING THE MONITOR SET ENGLISH ENG DVI Connection HDMI Connection Transmits digital video signal from your PC to the monitor set. Connect the PC and the monitor set with the DVI cable as shown the following illustrations. Select DVI input. Transmits digital video and audio signals from your PC to the monitor set. Connect the PC and the monitor set with the HDMI cable as shown in the following illustrations. Select HDMI input. Back of the product.
Display Port Connection IR Receiver Connection Transmits digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the Display Port cable as shown in the following illustrations. Select Display Port input source. Allows the use of IR receiver extension. /DVI IN Back of the product. DP AUDIO DP /DVI IN Back of the product. IN AUDIO IN REMOTE REMOTE CONTROL IN (not included) PC NOTE Sound may not be available depending on yy the DP version of your PC.
USING THE MONITOR SET ENGLISH ENG Adjusting the Screen Customizing Image Options Selecting an Image Mode Customize basic and advanced options of each image mode for the best screen performance. Display images in its optimized settings by selecting one of the preset image modes. 1 Press SETTINGS to access the main menus. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK.
USING THE MONITOR SET 21 Adjusting the Sound Customize options of each image mode for the best image quality. This function works in the following mode: yy RGB [PC] mode. Selecting an Sound Mode 1 Press SETTINGS to access the main menus. 1 Press SETTINGS to access the main menus.
USING THE MONITOR SET ENGLISH ENG Customizing Sound Options Using Additional Options Customize options of each sound mode for the best sound quality. Adjusting Aspect Ratio 1 Press SETTINGS to access the main menus. Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. 2 Press the navigation buttons to scroll to AUDIO and press OK. 3 Press the navigation buttons to scroll to Sound CAUTION Mode and press OK.
USING THE MONITOR SET 23 - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.
USING THE MONITOR SET Using the Input List ENGLISH ENG Selecting an Input Source 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK. Input source Description AV Watch video from a VCR or other external devices. Component Watch the content from a DVD or other external devices, or through a digital set-top box. RGB View a PC display on the screen. DVI-D View a PC display on the screen.
ENTERTAINMENT 25 Connecting to a Wired Network Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. Only supports wired network connection. After making a physical connection, a small number of networks may require the display network settings to be adjusted. For most networks, the display will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual.
ENTERTAINMENT NOTE ENGLISH ENG yy If you want to access the Internet directly on your display, the Internet connection should always be on. yy If you cannot access the Internet, check the network conditions from a PC on your network. yy When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yy If you do not complete the network settings, the network may not work properly.
ENTERTAINMENT Connecting USB Storage Devices Tips for Using USB Storage Devices yy Only a USB storage device is recognizable. yy If the USB storage device is connected through a USB hub, the device is not recognizable. yy A USB storage device using an automatic recognition programme may not be recognized. yy A USB storage device which uses its own driver may not be recognized. yy The recognition speed of a USB storage or device may depend on each device.
ENTERTAINMENT yy Be sure to back up important files since data ENGLISH ENG stored in a USB memory device may be damaged. We will not be responsible for any data loss. yy If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.
ENTERTAINMENT 29 Supported File Format Supported file format DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T RP,TP,ASF,WMV,FLV) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX 3.11, DivX4, DivX5. DivX6 Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.
ENTERTAINMENT Viewing Movies 5 Play a movie. ENGLISH ENG Play video files on display. Your display shows all of the video files saved in a USB storage device or shared folder on a PC. 1 Press the navigation buttons to scroll to My Media and press OK. NOTE yy Non-supported files are displayed the preview image by icon only . yy Abnormal files are displayed in the form of bitmap . 2 Press the navigation buttons to scroll to Movie List and press OK.
ENTERTAINMENT Tips for Using Playing Video Files Video Options 1 Press SETTINGS to access the Pop-Up menus. 2 Press the navigation buttons to scroll to Set Video Play., Set Video. or Set Audio. and press OK. NOTE yy Option values changed in Movie List does not affect Photo List and Music List. yy Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
ENTERTAINMENT When you select the Set Video Play, ENGLISH ENG 1 Press the navigation buttons to scroll to show Code Page Latin1 German, Italian, Portuguese, the Picture Size, Audio Language, Subtitle Language, or Repeat. 2 Press the navigation buttons to scroll to make appropriate adjustments.
ENTERTAINMENT When you select the Set Video, appropriate adjustments. Page 1/1 Photo List USB1 USB Drive 001 Drive1 002 010 011 Page 1/1 003 004 005 006 012 013 014 015 When you select the Set Audio, View Move Change Numbers To Music List 009 P Page Change Exit Mark Mode 1 Press the navigation buttons to scroll to show the Sound Mode, Clear Voice II or Balance.
ENTERTAINMENT Using Photo Options ENGLISH ENG Use the following options while viewing photos. Option ENERGY SAVING Description Press the ENERGY SAVING button repeatedly to change the brightness of your screen. yy Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). yy TransitionEffect: Set the view mode of the slideshow. yy BGM: Selects a music folder for the background music. NOTE yyYou cannot change the music folder while the background music is playing.
ENTERTAINMENT 35 When you select the Set Photo View, 2 Press the navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide. Door Open /Close Pushes the current slide like opening or closing the door as it plays to the next slide.
ENTERTAINMENT When you select the Set Video, Listening to Music ENGLISH ENG 1 Press the navigation buttons to scroll to make appropriate adjustments. 1 Press the navigation buttons to scroll to My Media and press OK. 2 Press the navigation buttons to scroll to Music When you select the Set Audio, 1 Press the navigation buttons to scroll to show the Sound Mode, Clear Voice II or Balance. 2 Press the navigation buttons to scroll to make appropriate adjustments. List and press OK.
ENTERTAINMENT 6 Control playback by using the following buttons. 004. - B04.mp3 00:00 Drive1 005. - B05.mp3 00:00 006. - B06.mp3 00:00 Page 1/1 007. - B07.mp3 00:00 005. - B05.mp3 02:30 / 03:25 Play with Photo Button NOTE 008. - B08.mp3 00:00 MENU Option Hide Exit Description Stops playing back the file and moves back to the music list.
ENTERTAINMENT Music Options ENGLISH ENG 1 Press SETTINGS to access the Pop-Up menus. 2 Press the navigation buttons to scroll to Set Audio Play or Set Audio and press OK. NOTE yy Option values changed in Movie List does not affect Photo List and Music List. yy Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List. Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager.
ENTERTAINMENT DivX® VOD Guide In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to MY MEDIA and press OK. 1 Press SETTINGS to access the main menus.
ENTERTAINMENT Using PIP/PBP 5 Select the PIP or PBP icon from the play list. ENGLISH ENG Displays videos or photos stored on a USB device on a single monitor by dividing it into the main and sub screens. 1 Press the SETTINGS button to move to OPTION and press OK. 2 Press PIP/PBP to select PIP or PBP and then 01:02:30 / 02:30:25 press OK. MENU Exit Hide Option < Movie List > PIP/PBP Mode Move Pre. Off Position PIP Size PBP 3 Select Movie List or Photo List from My Media.
CUSTOMIZING SETTINGS ENG ENGLISH CUSTOMIZING SETTINGS Accessing the Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE Adjusts the image size, quality, or effect. PICTURE OPTION Customizes the general settings.
CUSTOMIZING SETTINGS PICTURE Settings PICTURE ENGLISH ENG 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK. 3 Move • Aspect Ratio : 16:9 • Energy Saving : Off • Easy Brightness Control : Off • Smart Energy Saving : Off • Picture Mode • Backlight 70 • Contrast 100 - To return to the previous level, press BACK. • Sharpness 50 • Color 60 When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS Setting SCREEN (In RGB Mode Only) Description Corrects images to display smoother motion sequences. TruMotion • Low : De-Judder / De-Blur value is set to 3. • High : De-Judder / De-Blur value is set to 7. • De-Judder • User : De-Judder / De-Blur can be set manually. • De-Blur -D e-Judder : This function adjusts juddering of the screen. - De-Blur : This function adjusts and eliminates blurring of the screen. ◄ Low ► 3 3 OK Customizes the PC display options in RGB mode.
CUSTOMIZING SETTINGS Advanced Control ENGLISH ENG Setting Dynamic Contrast (Off/High/ Medium/Low) Description Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. (This function can be used only under component.) Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer.
CUSTOMIZING SETTINGS AUDIO Settings AUDIO 1 Press SETTINGS to access the main menus. Move • Balance 2 Press the navigation buttons to scroll to AUDIO and press • Sound Mode OK : Off ꔋ 0 L R : Standard • Infinite Sound: Off OK. 3 Press the navigation buttons to scroll to the setting or • Treble 50 • Bass 50 • Reset option you want and press OK. • Digital Audio Input • Speaker - To return to the previous level, press BACK. : Off 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS TIME Settings TIME Move ENGLISH ENG 1 Press SETTINGS to access the main menus. • Clock • Off Time : Off 2 Press the navigation buttons to scroll to TIME and press OK. • On Time : Off • Sleep Timer : Off 3 Press the navigation buttons to scroll to the setting or option • Power On Delay : Off • Auto Off : 15 min. you want and press OK. OK ꔋ • Automatic Standby : 4hours - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS OPTION Settings OPTION Move • ISM Method : Normal 2 Press the navigation buttons to scroll to OPTION and press • DPM Select : On • Fail Over : Off OK. OK ꔋ • Factory Reset 3 Press the navigation buttons to scroll to the setting or option you want and press OK. • Set ID :1 • Tile Mode • PIP/PBP • Fan - To return to the previous level, press BACK. • USB Content Recovery : Off 4 When you are finished, press EXIT. • Product/Service Info.
CUSTOMIZING SETTINGS Setting Description ENGLISH ENG Factory Reset Select this option to return to the default factory settings. Set ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 255) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. Tile Mode Tile Mode To use this function - Must be displayed with various other products.
CUSTOMIZING SETTINGS Setting Description Setting Mode This option indicates the monitor's internal temperature and controls the fan. • Auto: Switches the fan on and off according to the set temperature. • On: The fan is always switched on. • Manual: Switches the fan on and off according to user settings. Hysteresis The difference in temperature between when the fan is switched on and when it is off. Set Temperature Set the temperature at which the fan is switched on.
CUSTOMIZING SETTINGS Tile Mode ENGLISH ENG This monitor can be tiled with additional monitors to create a large tiled display.
CUSTOMIZING SETTINGS PIP/PBP Mode *PIP (Picture In Picture): Displays the sub screen in the main screen. *PBP (Picture By Picture): Displays the sub screen next to the main screen. NOTE The subscreen is only supported when using yy the USB device. 47WV50BS is not supporting composite(AV) yy signal & input.
CUSTOMIZING SETTINGS Picture ID ENGLISH ENG Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS232 connection. Each set is identified by a Set ID. If you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID can be controlled remotely.
CUSTOMIZING SETTINGS NETWORK Settings NETWORK Move 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK. • Network Setting : None • Network Status : Not connected • Server IP Setting • Server IP Status : Not connected 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
MAKING CONNECTIONS MAKING CONNECTIONS ENGLISH ENG Connect various external devices to the ports on the monitor set’s back panel. 1 Find an external device you want to connect to your monitor set shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details.
MAKING CONNECTIONS Connecting to a HD Receiver, DVD, Camcorder, Camera, Gaming Device, or VCR Player HDMI Connection Back of the product. DVI IN RGB /COMPONENT OUT Transmits the digital video signal from an external device to the monitor set. Connect the external device and the monitor set with the DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. AUDIO IN /DVI RGB /COMPONENT IN REMOTE CONTROL IN Back of the product.
MAKING CONNECTIONS ENGLISH ENG Component Connection AV(CVBS) Connection Transmits the analog video and audio signals from an external device to the monitor set. Connect the external device and the monitor set with the RGB-Component cable as shown in the following illustration. Transmits the analog video and audio signals from an external device to the monitor set. Connect the external device and the monitor set with the composite cable as shown in the following illustration. Back of the product.
MAKING CONNECTIONS Connecting to the LAN Connecting to a USB A Using a router (Switch) Switch Monitor Set PC Network B Using the Internet. LAN Monitor Set Network PC or ENG ENGLISH Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player, or a USB memory card reader to the monitor set and access the USB menu to use various multimedia files.
MAKING CONNECTIONS Daisy Chain Monitors ENGLISH ENG Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box. • To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products.
TROUBLESHOOTING 59 No image is displayed Problem Is the product power cord connected? Power is on, but the screen appears extremely dark. Does the 'Invalid Format' message appear? oes the 'No signal' message D appear? Resolution yy See if the power cord is properly connected to the outlet. yy Adjust brightness and contrast again. yy Backlight may need repair. yy The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product.
TROUBLESHOOTING The screen image looks abnormal. ENGLISH ENG Problem Resolution Is the screen position wrong? yy D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. yy See if the video card resolution and frequency are supported by the product.
TROUBLESHOOTING 61 Screen color is abnormal. Resolution Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select (16 colors). Control Panel - Display - Settings - Color Table menu in Windows. creen color is unstable or S mono-colored. yy Check the connection status of the signal cable. Or, re-insert the PC video card.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS LCD Panel Video Signal Screen Type 1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.8 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Max.
SPECIFICATIONS 63 Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS DTV Mode RGB (PC) supported mode ENGLISH ENG Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution Component HDMI/DVI (DTV) 640 x 480 31.469 59.94 480i o x o x 640 x 480 37.5 75 576i 720 x 400 31.468 70.8 480p o o o o 800 x 600 37.879 60.317 576p 800 x 600 46.875 75 720p o o 1080i o o 1080p o o 832 x 624 49.725 74.55 1024 x 768 48.363 60 1024 x 768 60.123 75.029 1280 x 720 44.772 59.855 1366 x 768 47.
IR CODES 65 IR CODES ENG ENGLISH All models do not support the HDMI/USB function. yy Some key codes are not supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at one yy time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 255 without being duplicated. yy Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product.
CONTROLLING THE MULTIPLE PRODUCT 67 Command Reference List DATA (Hexadecimal) 1 2 01. Power k a 00 to 01 02. Input Select x b Refer to ‘Input Select.’ 03. Aspect Ratio k c Refer to ‘Aspect Ratio.’ 04. Energy Saving j q Refer to ‘Energy Saving.’ 05. Picture mode d x Refer to ‘Picture mode.’ 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08. Sharpness k k 00 to 64 09. Color k i 00 to 64 10. Tint k j 00 to 64 11. Color Temperature x u 00 to 64 12.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG COMMAND DATA (Hexadecimal) 1 2 39. Tile Mode d d 00 to 01 40. Tile Mode Check d z FF 41. Tile ID d i Refer to ‘Tile ID.’ 42. Tile H Position d e 00 to 32 43. Tile V Position d f 00 to 32 44. Tile H Size d g 00 to 32 45. Tile V Size d h 00 to 32 46. Natural Mode (In Tile mode) d j 00 to 01 47. DPM Select f j 00 to 01 48. FAN Control d o 00 to 03 49. FAN Fault Check d w FF 50. Temperature Value d n FF 51.
CONTROLLING THE MULTIPLE PRODUCT 69 Transmission / Receiving Protocol [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers. * [Data]: Information passed to the set. * [Data1]: Information passed to the set. * [Data2]: Information passed to the set.
CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) To control the Power On/Off the display. ENGLISH ENG Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor set is fully powered on, the Acknowledgement signal is returned properly. * There may be a certain time of delay between the Transmission and Acknowledgement signals. 04. Energy Saving (Command: j q) To set the Energy Saving function.
CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) To adjust the screen brightness. Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) To adjust the screen sharpness. * This function is available only in AV/Component input. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data 00 to 64: Sharpness 0 to 100 Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 09. Color (Command: k i) To adjust the screen color.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 13. V Position (Command: f r) To adjust the screen Vertical Position. * This function is available only when the Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution. (Only available for RGB-PC input.) Transmission [f][r][ ][Set ID][ ][Data][Cr] 16. Balance (Command: k t) To adjust the sound balance.
CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) To adjust the Bass values. Data 00 to 64: Bass 0 to 100 Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 20. Speaker (Command: d v) To select the speaker on/off. Transmission [d][v][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] 22. Volume Control (Command: k f) To set the playback volume.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 25. Off Timer(Repeat Mode/ Time) (Command: f e) To set the Off Timer(Repeat Mode/ Time) function. 26. On Timer(Repeat Mode/ Time) (Command: f d) To set the On Timer(Repeat mode/ Time) function. Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Transmission [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1.
CONTROLLING THE MULTIPLE PRODUCT Transmission [f][u][ ][Set ID][ ][Data1][Cr] [f][u][ ][Set ID][ ][Data1][Data2][Cr] Data (Add schedule) 20: Input (AV) 40: Component 60. RGB 70: DVI-D 90: HDMI (HDMI1) C0: Display Port 91: HDMI2/SDI B0:SuperSign Data1 (Change schedule) 1.
CONTROLLING THE MULTIPLE PRODUCT 31. Auto Off (Command: f g) To set the Auto Off function. ENGLISH ENG Transmission [f][g][ ][Set ID][ ][Data][Cr] Data 00: Off (No off after 15 minutes) 01: 15 min.(Off after 15 minutes) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 32. Language (Command: f i) To set the language for OSD.
CONTROLLING THE MULTIPLE PRODUCT Transmission [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [ ][Data4][ ][Data5][Cr] Data 1 to 5 (Priority 1 to 5) 60: RGB 70: DVI-D 90: HDMI(HDMI1) C0: Display Port 91: HDMI2/SDI * The number of data items differs depending on the model. 40. Tile Mode Check (Command: d z) To check Tile Mode status. Transmission [d][z][ ][Set ID][ ][Data][Cr] Data FF: Check Tile Mode status. ** It may not be supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 43. Tile V Position (Command: d f) To adjust the Tile Vertical position. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][f][ ][Set ID][ ][Data][Cr] Data 0 to 32: 0 (Bottom) to 50 (Top) * Bottom/Top values depend on Tile Vertical size. ** It may not be supported depending on the model. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 44.
CONTROLLING THE MULTIPLE PRODUCT 49. FAN Fault Check (Command: d w) To check the fan errors. Data FF: Read the status Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] Data 00: Fan fault 01: Fan OK 02: Model without a Fan 50. Temperature Value (Command: d n) To check the inside temperature value. Transmission [d][n][ ][Set ID][ ][Data][Cr] Data FF: Check the status Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] [n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 52.
CONTROLLING THE MULTIPLE PRODUCT 55. Serial No.Check (Command: f y) To check the Serial Numbers. ENGLISH ENG Transmission [f][y][ ][Set ID][ ][Data][Cr] Data FF: Check the product Serial Number Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] 58. White Balance Green Gain (Command: j n) To set the White Balance Green Gain. Transmission [j][n][ ][Set ID][ ][Data][Cr] Data 00 to FE: Green Gain 0 to 254 Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] * Data is ASCII code. 56.
CONTROLLING THE MULTIPLE PRODUCT Transmission [d][t][ ][Set ID][ ][Data][Cr] Data 00: Synchronized (When the monitor is off, the PC is also turned off.) 01: Not synchronized (The monitor is off but the PC is on.) ** It may not be supported depending on the model. Acknowledgement [t][ ][Set ID][ ][OK][Data][x] 62. PC Power (Command: d s) Control the PC power. Transmission [d][s][ ][Set ID][ ][Data][Cr] Data 00: PC is turned off. 01: PC is turned on. ** It may not be supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT 65. Reading luminance values (Command: m u) Reads luminance values.
CONTROLLING THE MULTIPLE PRODUCT 83 67. BLU Maintenance (Command: m t) Select ON/OFF of BLU Maintenance. Data 00: BLU Maintenance OFF 01: BLU Maintenance ON ** It may not be supported, depending on the model. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 68. Screen mute (Command: k d) Turns the screen on or off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Turns the screen on. 01: Turns the screen off.
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com.
