Printing specification Drawn Checked Approved Signature Bohwa.Kim Yena.Park Jongok.kim MMM/DD/YYYY FEB/26/2013 FEB/26/2013 FEB/26/2013 1. Model Description Model name : 50PH670S-ZA Brand name : LG Part number 2nd, 3rd Suffix : EK Product name : PH670S (Revision number) : MFL67714603 (1302-REV00) 2. Printing Specification 1.
Part number Pagination sheet : (Revision number) Total pages 40 pages Back (ENG) P/NO.
OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PH47** PH67** PH66** P/NO : MFL67714603 (1302-REV00) Printed in Korea www.lg.
2 TABLE OF CONTENTS ENGLISH TABLE OF CONTENTS 3 LICENSES 33 MAINTENANCE 3 OPEN SOURCE SOFTWARE NOTICE 33 33 33 Cleaning your TV - Screen, frame, cabinet and stand - Power cord 4 SAFETY INSTRUCTIONS 33 TROUBLESHOOTING 10 - Viewing 3D Imaging (Only 3D models) 12 INSTALLATION PROCEDURE 34 EXTERNAL CONTROL DEVICE SETUP 12 ASSEMBLING AND PREPARING 12 15 16 17 18 18 20 21 22 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Moun
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
4 SAFETY INSTRUCTIONS ENGLISH SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS y Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Des icca nt y Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
6 SAFETY INSTRUCTIONS ENGLISH Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local yy service centre.
SAFETY INSTRUCTIONS Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to yy keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. yy Also avoid places where there is vibration or where the product cannot be fully supported.
8 SAFETY INSTRUCTIONS ENGLISH Do not turn the product On/Off by plugging-in or unplugging the power plug to the yy wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from yy overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS Contact the service centre once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10 SAFETY INSTRUCTIONS ENGLISH Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS 11 Viewing Environment � Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. � Viewing Position -- Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you may not be able to view 3D contents properly. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENERGY AV MODE INPUT ENGLISH TV SAVING 1 2 3 4 5 6 7 BACK LIST 8 9 0 FLASHBK SMART MARK FAV VOL 3D CH P A G E MUTE MENU INFO ENTER BACK /Q.MENU Q.MENU P EXIT L/R SELECT FREEZE RATIO Remote Control, Batteries (AAA) (Only 42/50PH47**, 50/60PH66**) (See p. 29) Magic Remote Control, Batteries (AA) (Only 50/60PH67**) (See p. 30) Owner’s manual Ferrite core (Depending on model) (See p. 14) Power Cord Power Cord Holder (Depending on model) (See p.
14 ASSEMBLING AND PREPARING ENGLISH NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade yy of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
ASSEMBLING AND PREPARING 15 Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. BACK SMART /Q.
16 ASSEMBLING AND PREPARING ENGLISH Parts and buttons Screen Speakers Buttons Remote control sensor Power indicator Button Description Turns the power on or off. Selects the highlighted menu option or confirms an input S Accesses the main menus, or saves your input and exits the menus. Changes the input source H H Adjusts the volume level. Scrolls through the saved programmes.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
18 ASSEMBLING AND PREPARING ENGLISH Setting up the TV 3 Image shown may differ from your TV.
ASSEMBLING AND PREPARING CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. y y Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed. Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
20 ASSEMBLING AND PREPARING ENGLISH Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. Adjusting the angle of the TV to suit view (This feature is not available for all models.) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
ASSEMBLING AND PREPARING 21 yy Make sure that children do not climb on or hang on the TV. NOTE yy Use a platform or cabinet that is strong and large enough to support the TV securely. yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.
22 ASSEMBLING AND PREPARING ENGLISH Tidying cables Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident. Use Cable Holder to neatly secure and position cables together. Position the LAN Cable as shown to reduce the electromagnetic interference wave.
MAKING CONNECTIONS Antenna Connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). This section on MAKING CONNECTIONS mainly uses diagrams for the 50/60PH67** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
24 MAKING CONNECTIONS IN 3(MHL) Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use. DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS 25 Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with th e composite cable as shown.
26 MAKING CONNECTIONS Audio Connection Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. You may use an optional external audio system instead of the built-in speaker. Digital optical audio connection IN 3(MHL) ENGLISH MHL Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS 27 CI module Connection Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.
28 MAKING CONNECTIONS Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. AV 1 IN / OUT ENGLISH Euro Scart Connection (*Not Provided) AUDIO / VIDEO Output Type Current input mode Digital TV Analogue TV, AV Component HDMI 1 AV1 (TV Out1) Digital TV Analogue TV X TV Out : Outputs Analogue TV or Digital TV signals. NOTE yy Any Euro scart cable used must be signal shielded.
REMOTE CONTROL 29 This item is not included for all models. The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
30 MAGIC REMOTE CONTROL FUNCTIONS ENGLISH MAGIC REMOTE CONTROL FUNCTIONS This item is not included for all models. When the message “Magic Remote Control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
Registering Magic Remote Control 11-1 Brief Info Title Test... 31 Info. It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. BACKto register HOME How the Magic Remote Control P MY APPS 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.
32 USING THE USER GUIDE ENGLISH USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. Press the SMART button to access the Smart Home menu. Select User Guide and press Wheel(OK). 1 2 OPTION > TO set language 1 SMART Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Audio Language Subtitle Language Selects a language for the display text.
MAINTENANCE / TROUBLESHOOTING 33 ENGLISH MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
34 EXTERNAL CONTROL DEVICE SETUP / SPECIFICATIONS ENGLISH EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit www.lg.com SPECIFICATIONS (Only 50/60PH67**) Wireless LAN module(TWFM-B006D) specification Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 11 dBm 802.11b: 14 dBm Output Power 802.11g: 10.5 dBm (Max.) 802.11n - 2.4GHz: 11 dBm 802.11n - 5GHz: 12.
SPECIFICATIONS 42PH47** 50PH47** 42PH470U-ZD 42PH470R-ZD 42PH4707-ZD 50PH470U-ZD 50PH470R-ZD 50PH4707-ZD 983.6 x 650.3 x 250.0 1168.0 x 755.4 x 292.7 983.6 x 595.6 x 57.0 19.6 1168.0 x 698.6 x 57.0 25.4 18.4 24.0 50PH67** 60PH67** 50PH670S-ZA 50PH670S-ZD 50PH670V-ZD 50PH672V-ZA 50PH672V-ZC 50PH672V-ZD 50PH6708-ZA 50PH6708-ZD 60PH670S-ZA 60PH670S-ZD 60PH670V-ZD 60PH672V-ZA 60PH672V-ZC 50PH672V-ZD 60PH6708-ZA 60PH6708-ZD 1168.0 x 755.4 x 292.7 1386.8 x 874.0 x 340.0 1168.0 x 698.6 x 57.
36 SPECIFICATIONS ENGLISH CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.
SPECIFICATIONS Component port connecting information Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x480 31.469 31.5 59.94 60 720x576 31.25 50 1280x720 37.5 44.96 45 50 59.94 60 1920x1080 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.94 60 HDMI/DVI-PC supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640x350 31.468 70.09 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.
38 SPECIFICATIONS ENGLISH 3D supported mode yyVideo, which is input as HDMI, USB, DLNA, is switched into the 3D screen automatically. (This function does not support all of the 3D video format. The specific 3D video format is not switched into the 3D screen automatically. ) yy The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images.
SPECIFICATIONS 39 Signal Input Resolution Horizontal Frequency (kHz) Verticla Frequency (Hz) Playable 3D video format DTV HD / SD - - ATV(CVBS/SCART) SD - - Component HD / SD - - 1024X768 48.36 2D to 3D, Side by Side(Half), Top & Bottom 1360X768 47.71 60 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Frame Sequential, Row Interleaving, Column Interleaving HDMI-PC 1920X1080 67.5 Others - - 2D to 3D, Side by Side(Half), Top & Bottom 480P 31.5 60 576P 31.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Country Service 0900 543 5454 015 200 255 800 187 40 0032 15 200255 801 54 54 54 07001 54 54 808 78 54 54 810 555 810 031 228 3542 8088 5758 0850 111 154 0800 0 54 54 3220 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.