User Guide This is a 「User Guide」 installed on the TV. The contents of this guide are subject to change without prior notice for quality improvement.
❐❐To view programme information Wheel(OK) ➾ Info. Displays information on current programme and / or current time, etc. ✎✎ Image shown may differ from your TV. Current time Sat, 1 Jan 12:02 14:00 16:30 Programme name or external device name Prev./Next Pr.
❐❐To set favourite programmes HOME ➾ Settings ➙ SETUP ➙ Programme Edit 1 Move to the desired programme and press Wheel(OK) button. Programme is selected. 2 Press Set as Favourite. 3 Select the desired Favourite Pr. Group. 4 Select OK. Favourite is set. ❐❐To use Favourite HOME ➾ Pr. List Programme list will appear. Selects the desired preset favourite programme from Favourite List A to D.
HOME ➾ Programme Guide [In Digital Mode Only] Obtains information about programmes and airing times. Obtains programme information and schedules viewing / recording. [Image shown may differ from your TV.] Programme Guide ALL Today 1/2 page 10 Aug. 2011 7:00 Press Wheel(OK) button after moving to a programme of your choice to view or view / record. -24H +24H Select schedule by date Schedule List FAV Favourite Pr. Group After viewing the schedule list, makes revisions or deletions.
❐❐Automatically Setting Up Programme HOME ➾ Settings ➙ SETUP ➙ Auto Tuning Automatically tunes the programmes. 1 Select Country where the TV is used. Programme settings change depending on the country you choose. 2 Initiate Auto Tuning. 3 Select Input Source of your choice. 4 Set Auto Tuning following screen instructions. ✎✎ If Input Source is not connected properly, programme registration may not work. ✎✎ Auto Tuning only finds programmes that are currently broadcasting.
❌❌Cable DTV Setting option When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as “default”. Frequency Symbol rate Modulation Network ID Start Frequency End Frequency Enter a user-defined frequency. Speed at which a device such as modem sends symbols to a programme. Loading of audio or video signals onto carrier.
❌❌Satellite Setting Option Satellite LNB Frequency Transponder 22KHz Tone Select your desired Satellite. Select one value from 9750/10600, 9750/10750, 9750, 10600,10750, 5150. If you select 9750/10600, 9750/10750(MHz), 22KHz Tone is disabled. If you cannot find the LNB frequency value from the list, select User and manually enter the frequency. Select the transponder you want to tune. When using 22KHz Tone switch, select A or B. If you use 22KHz Tone, Unicable and Motor Type are disabled.
To enable the power supply for the LNB, select On. If you select Off, Motor Type is disabled. When using DiSEqC, select one option from A~D/ToneA~B. DiSEqC If you use DiSEqC, Unicable and Motor Type are disabled. Select On to use Unicable and set the Unicable in the Unicable Settings Unicable Setting menu. When Unicable is enabled, 22KHz Tone, DiSEqC, Motor Type are disabled. Select Motor Type to use Motor and set the Motor in the Motor Type Motor Setting menu.
✎✎ If you set satellite to others, you must add a transponder using Manual Tuning. ✎✎ When selecting 22KHz Tone and DiSEqc, you must connect them in the same position as displayed on the OSD. ✎✎ If you delete a Satellite, all programmes stored in the Satellite are deleted.
❌❌Motor Setting Option • DiSEqC 1.2 : Control motor to change satellite dish position. Drive Direction Select the direction in which you want to move the motor. Two modes are available : Step and Continuous. • Step : The motor moves based on the value you enter Drive Mode (from 1 to 128). • Continuous : The motor moves continuously until you press the Stop. Test TP Select the test TP you want to tune.
Set Limit Go To Zero Store Set the motor movement to east or west to have the motor move only within the direction set. • On : You can limit the movement to the current direction by selecting the West/East. • Off : You can cancel the limit you set. You can move the motor to Zero. You can save the motor’s current direction. • USALS : Set your current location(Longitude/Latitude).
❐❐Cable DTV Setting HOME ➾ Settings ➙ SETUP ➙ Cable DTV Setting [In Cable, Cable & Satellite mode only] Set Service Operator. Service Operator When changing Service Operator, the existing saved programmes are deleted and Auto Tuning runs. • On : You can update information for all the programmes that can be updated, including the programme currently Channel Auto being watched. Update • Off : You can only update information for the programme currently being watched.
✎✎ The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country. ✎✎ If number of supported Service Operator for each country is 1, corresponding function becomes inactive. ✎✎ You can not select the Cable DTV Setting when the service operator is set to “Ziggo”.
❐❐Satellite Setting HOME ➾ Settings ➙ SETUP ➙ Satellite Setting [In Satellite, Antenna & Satellite, Cable & Satellite mode only] You can add/delete/set the satellite you want.
❐❐Tivu Programme List Update HOME ➾ Settings ➙ SETUP ➙ Tivu Programme List Update [Only Italy] [In Satellite, Antenna & Satellite, Cable & Satellite mode only] It updates the changed Programme List information by based on country broadcasting circumstance and satellite. It updates the Programme List when the TV turn off all the time. After updates, the Programme List may be changed. If not want, select Off.
❐❐Programme List Update SETTINGS ➾ SETUP ➙ Programme List Update [In Satellite, Antenna & Satellite, Cable & Satellite mode only] It updates the changed Programme List information by based on country broadcasting circumstance and satellite. It updates the Programme List when the TV turn off all the time. After updates, the Programme List may be changed. If not want, select Off. ✎✎ For Austria, Germany, Poland and Russia, this function is supported when Service Operator is not set to None.
❐❐Regional Programme HOME ➾ Settings ➙ SETUP ➙ Regional Programme [Only Austria] Set region broadcasting and watch region broadcasting at a specific time. ✎✎ To set Service Operator of Satellite, ORS must be selected.
❐❐To use Manual Tuning HOME ➾ Settings ➙ SETUP ➙ Manual Tuning Adjusts programmes manually and saves the results. For digital broadcasting, signal strength and signal quality can be checked.
❐❐To edit programmes HOME ➾ Settings ➙ SETUP ➙ Programme Edit Edits the saved programmes. Set as favourite programme, block/unblock programme, skip programme etc. of the selected programme.
Wheel(OK) ➾ (Screen Remote Control) (or press the TEXT button.) [depending on the country] Teletext is a free service provided by the TV station that offers text-based information about TV programmes, news and weather. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. Colour button Number button ꔵ To select the preceding or following page. Enters the page number to move to. To select the preceding or following page.
❐❐Special Teletext Function Wheel(OK) ➾ (Screen Remote Control) (or press the T. OPT button.) Select the Text Option menu. ꔻ Index ꔾ Time ꕀ Hold Select each index page. When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages.
ꔽ Reveal ꔼ Update Language Select this menu to display concealed information, such as solutions to riddles or puzzles. Displays the TV picture on the screen while waiting for a new teletext page. [In Digital Mode Only] Sets Teletext language.
Wheel(OK) ➾ (Screen Remote Control) (or press the TEXT button.) [In UK/Ireland only] The TV gives you access to digital teletext which gives much better text, graphics etc. than older analogue teletext. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.
❌❌Teletext within digital service 1 Press the numeric or ꔵ button to select a certain service which broadcasts digital teletext. 2 Follow the indications on digital teletext and move onto the next step by pressing Wheel(OK), TEXT, Navigation, Red, Green, Yellow, Blue or NUMBER buttons etc.. 3 Press the number or ꔵ button to use a different digital teletext service.
❌❌Teletext in digital service 1 Press the numeric or ꔵ button to select a certain service which broadcasts digital teletext. 2 Press the TEXT or colour button to switch on teletext. 3 Follow the indications on digital teletext and move onto the next step by pressing Wheel(OK), Navigation, Red, Green, Yellow, Blue or NUMBER buttons etc.. 4 Press the TEXT or colour button to switch off digital teletext and return to TV viewing.
❐❐To Set MHP Auto Start HOME ➾ Settings➙ OPTION ➙ MHP Auto start [Depending on model] [In Italy only] This function Auto Starts the MHP function, Italian data broadcast. Use in programme with MHP signal. Data broadcast function may not be smooth due to situation from the broadcasting station.
❐❐What is HbbTV? [Depending on model] [Depending on Country] The HbbTV or Hybrid Broadcast Broadband TV replaces existing analogue teletext services with a new-generation, web-based interactive broadcasting service. Similar to digital text and EPG, HbbTV can be used to provide a variety of services in addition to standard broadcast content. The functionality and quality of the HbbTV service may vary depending on your broadcast service provider. This function may not be available in some countries.
❐❐To use HbbTV HOME ➾ Settings ➙ OPTION ➙ HbbTV Sets HbbTV to On. Enjoy a variety of content on the HbbTV service. ✎✎ The service may be limited when the device is not connected to the internet. ✎✎ If HbbTV is set to On, the pattern gesture function of the Magic Remote Control does not work.
HOME ➾ Settings ➙ OPTION ➙ Data Service [Depending on country] This function allows users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
HOME ➾ Settings ➙ SETUP ➙ CI Information • This function enables you to watch some encrypted services (pay services). • If you remove the CI Module, you cannot watch pay services. • CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances. • When the module is inserted into the CI slot, you can access the module menu. • To purchase a module and smart card, contact your dealer.
• When the TV is turned on after inserting a CI Module, you may not have any sound output. The Smart Card may not be compatible with the CI module. • When using a CAM(Conditional Access Module), please make sure it meets fully the requirements of either DVB-CI or CI plus. • An abnormal process of CAM(Conditional Access Module) may cause a bad picture.
HOME ➾ Settings ➙ PICTURE ➙ Aspect Ratio Selects the screen aspect ratio. 16:9 Just Scan Original Resizes images to fit the screen width. Displays video images in the original size without removing parts of the edge of the image. ✎✎ In DTV/HDMI/Component (over 720p) mode, Just Scan is available. When your TV receives a wide screen signal it will automatically change to the picture format broadcasted.
Full Wide 4:3 14:9 Zoom Cinema Zoom When TV receives the wide screen signal, it will let you adjust the picture horizontally or vertically, in a linear proportion,to fill the entire screen fully. 4:3 and 14:9 video is supported in full screen without any video distortion through DTV input. ✎✎ In Analog/DTV/AV/Scart mode, Full Wide is available. Resizes images to the previous standard 4:3. You can view a picture format of 14:9 or a general TV programme in the 14:9 mode.
✎✎ While viewing an external device, these cases may result in image burn: - a video with stationary caption (such as network name) - 4 : 3 aspect ratio mode for an extended period Take caution when using these functions. ✎✎ Available picture size may differ depending on the input signal. ✎✎ The screen aspect ratios on HDMI/RGB-PC input are available in 4:3 and 16:9 only.
❐❐To adjust picture in PC input mode HOME ➾ Settings ➙ PICTURE ➙ Screen Adjusts picture in RGB-PC mode. Resolution Sets the desired resolution. ✎✎ Resolution may only be selected when the PC resolution is set to 1024 x 768, 1280 x 768 or 1360 x 768. Auto Optimizes picture. Configuration Position / Size If screen size or location is distorted, user can directly adjust / Phase the screen size and position. Reset Resets all changes on picture settings on PC input mode.
❐❐To set PC resolution 1 Right-click on the desktop of your PC and select 「Properties」. 2 Click on 「Settings」 and refer to supported formats to set the resolution. 3 Select 「Advanced → Monitor → Monitor Settings」 on the setting window. Refer to supported formats to select the optimal vertical frequency. ✎✎ On PC mode, 1920X1080 resolution delivers the optimum picture quality. ✎✎ Resolution settings differ depending on the type of PC.
❌❌Formats Supported PC Input Mode HDMI-PC/ RGB-PC HDMI-PC Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 640x350 720x400 640x480 800x600 1024x768 1360x768 1920x1080 1280x1024 31.468 31.469 31.469 37.879 48.363 47.712 67.5 63.981 70.09 70.08 59.94 60.31 60.00 60.015 60.00 60.
HOME ➾ Quick Menu ➙ AV Mode Sets the best picture / audio optimized for different AV modes. Off Operates with the value set in the picture / sound menu. Cinema / ꔧ Cinema Optimizes picture and audio settings for movies. Game Optimizes picture and audio settings for games. ✎✎ ꔧ [Depending on model] THX (Thomlinson Holman’s Experiment) is an audio and video certification standard established by George Lucas and Thomlinson.
❐❐To adjust pictures with Picture Wizard HOME ➾ Settings ➙ PICTURE ➙ Picture Wizard Ⅱ Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for optimum picture quality without expensive pattern devices or help from a specialist. Follow the instructions to obtain the optimum picture quality.
❐❐To select Picture Mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode Selects the picture mode optimized for the viewing environment or the programme. Vivid Standard APS Heightens contrast, brightness and sharpness to display vivid images. Displays images in standard levels of contrast, brightness and sharpness. APS: Auto Power Saving This mode sets the optimum brightness depending on the ambient lightiing and have energy saving function.
Cinema / ꔧ Cinema / Game / Photo ꕋ Expert Displays the optimum picture for movie, game and photo (still image). [ꔧ Cinema : Depending on model] Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu is ISFcertified and provided for picture tuning experts. (ISF logo can only be used on ISF-certified TV units.
❐❐To fine-tune picture mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Contrast / Brightness / Sharpness / Colour / Tint / Colour Temp. First select a Picture Mode of your choice. Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark. Colour Adjusts the colours on the screen darker or lighter.
Tint Colour Temp. Adjusts the red/green colour balance. Adjusts the overall tone of colours to warm or cool. ✎✎ Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.
❐❐To set advanced control HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Advanced control/ Expert Control Calibrates the screen for each picture mode or adjusts picture settings for a special screen. First select a Picture Mode of your choice. Dynamic Contrast Adjusts contrast and colour to the optimal level according to the screen’s brightness. Skin Colour : Skin colour spectrum can be separately set to implement the skin colour as defined by the user.
Super Resolution Provides a crystal-clear picture by improving the details in areas where the picture is blurry or unclear. Gamma Sets the gradation curve according to the output of the picture signal in relation to the input signal. Colour Gamut Selects the range of colours that can be expressed. Edge Enhancer Shows clearer and distinctive yet natural edges of the video. xvYCC Colour Filter Expert Pattern Expresses richer colours.
White Balance Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via the Method / Pattern etc. This is a function used by experts when they adjust colours using a test pattern of six colours (Red / Green / Colour Management Blue / Cyan / Magenta / Yellow) without affecting other System colour areas. For normal images, adjustments may not result in noticeable colour changes.
❐❐To set additional picture options HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option Adjusts detailed setting for images. Noise Reduction Reduces screen noise in the video. Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen. Film Mode Optimizes the screen for movie viewing. Motion Eye Care [Depending on model] Adjusts screen brightness to prevent eye glare.
❐❐To reset Picture Mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Reset Resets values customized by the user. Each picture mode is reset. Select the picture mode you wish to reset.
HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ TruMotion Corrects images to display smoother motion sequences. Smooth Clear User De-Judder value is set to 3. De-Judder value is set to 7. De-Judder can be set manually. • De-Judder : This function adjusts juddering of the screen. ✎✎ If the video signal is 60Hz, TruMotion may not work.
❐❐To use Sound Mode HOME ➾ Settings ➙ SOUND ➙ Sound Mode Optimizes TV audio to the selected sound mode. Standard Music / Cinema / Sport / Game Vivid User Setting Suitable for all types of video Sets audio optimized for a specific genre. Delivers distinct voices with rich bass and clear, high-pitched sounds. Adjusts the volume to a level of your choice using the User EQ.
❐❐To fine-tune the volume HOME ➾ Settings ➙ SOUND ➙ User EQ Sets Sound Mode at User Setting first. 100 Hz / 300 Hz / 1 kHz / 3 kHz / 10 kHz Reset Sets EQ by manual adjustment of sound bands. Resets the equalizer value changed by the user.
❐❐To set Volume Mode HOME ➾ Settings ➙ SOUND ➙ Volume Mode Sets various modes for volume control. Auto Volume Volume Control Sets Auto Volume to On. Different volume outputs from programme to programme. They are then automatically adjusted for convenient TV watching, when clicking through different programme. Using a single volume curve may result in an inaudible or loud sound depending on the environment. Adjusts volume levels depending on the time of day (day/night).
❐❐To use Sound Optimizer function HOME ➾ Settings ➙ SOUND ➙ Sound Optimizer Allows optimized sound for custom TV installation. Normal Wall Mount Type Stand Type General sound mode. Optimizes sound for a wall-mounted TV. Optimizes sound for a stand-mounted TV.
❐❐To use Virtual Surround sound HOME ➾ Settings ➙ SOUND ➙ Virtual Surround LG’s proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. ✎✎ If Clear Voice ll is set to ON, Virtual Surround will not be chosen. ❐❐To use Clear Voice ll function HOME ➾ Settings ➙ SOUND ➙ Clear Voice ll Boosts voice clarity.
❐❐To synchronize audio and video HOME ➾ Settings ➙ SOUND ➙ AV Sync. Synchronizes video and audio directly when they do not match. If you set AV Sync. to ON, you can adjust the sound output (TV speakers or SPDIF) to the screen image. TV Speaker SPDIF Adjusts the synchronization of the sound from the TV's internal speakers. The "-" button makes the sound output faster and the "+" button slower than the default value.
Bypass Outputs broadcasting signals or the audio of an external device without audio delay. Audio may be output before video as it takes time to process video input into the TV. ❐❐To use ARC mode HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ ARC Mode External audio devices can be connected via High-Speed HDMIⓇ cable without an extra optical audio cable to output SPDIF. It interfaces with SIMPLINK. For an external device that supports ARC (Audio Return Channel), connect it to the HDMI(ARC) port.
Off On Even when the connected ARC-supported external audio device is turned on, audio output is not automatically processed through the external audio device's speakers. If ARC-supported external audio device is turned on, audio output is automatically processed through the external audio device speakers. For SIMPLINK, refer to 「General → To control external devices」. ✎✎ Connect to ARC-only terminal when connecting to external devices. ✎✎ Use high-speed HDMIⓇ cable when connecting to external devices.
❐❐To adjust audio balance HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Balance Adjusts left/right audio balance.
❐❐To use TV’s speakers HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ TV Speaker When listening via speakers on external audio devices connected to the TV, such as home theatre equipment, the TV speaker may be turned off. If there is a home theatre device connected to SIMPLINK, setting the TV Speaker to Off will turn the home theatre equipment on automatically. Off On TV speakers do not play sound. Plays the TV sound through external audio device speakers connected to the TV.
❐❐To use Digital Sound Out HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Digital Sound Out Sets up Digital Sound Output.
❐❐DTV Sound Setting HOME ➾ Settings ➙ SOUND ➙ DTV Sound Setting [Depending on model] When different audio types exist in an input signal, this function allows you to select the audio type you want. If set to AUTO the search order is HE-AAC → Dolby Digital+ → Dolby Digital → MPEG and output is produced in the first Audio Format found. ✎✎ In Italy only, the order is HE-AAC → Dolby Digital+ → MPEG → Dolby Digital. ✎✎ In New Zealand only, the order is Dolby Digital+ → Dolby Digital → HE-AAC → MPEG.
❐❐To select an external input HOME ➾ Input List Selects external input. INPUT LIST Selects speaker. TV Speaker Selects input. TV USB AV Component HDMI1 HDMI2 Change Device Name SimpLink Setting Sets SIMPLINK. Edits the name of external device connected to external terminal.
❐❐To use SIMPLINK SIMPLINK is a feature that enables you to control and manage various multimedia devices conveniently using the TV remote control only via the SIMPLINK menu. 1 Connect the TV's HDMI IN terminal with the SIMPLINK device's HDMI output terminal using an HDMI cable. For home theatre units with a SIMPLINK function, connect HDMI terminals as above, and use an optical cable to connect Optical Digital Audio Out from the TV to Optical Digital Audio In of the SIMPLINK device.
✎✎ This function only works on devices with the SIMPLINK logo ( Verify that the external device has a SIMPLINK logo. ). ✎✎ To use the SIMPLINK function, you need to use a high-speed HDMIⓇ cable (with CEC, or Consumer Electronics Control, feature added). High-speed HDMIⓇ cables have the No. 13 pin connected for information exchange between devices. ✎✎ Turn on or select the media of a device with home theatre features to see the speaker switch to HT Speaker.
❌❌Explanation of SIMPLINK features Direct Play Plays the multimedia device on the TV instantly. Select multimedia device Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly. Disc playback Manages the multimedia device with the TV remote control. Power off all devices If the Auto Power function is set to On in the SIMPLINK settings, turning the TV off will turn the power off on all SIMPLINK-connected devices.
Sync Power on If the Auto Power function is set to On in the SIMPLINK settings, turning on a SIMPLINK device will turn the TV on. Speaker Selects speaker either on the home theatre unit or the TV.
HOME ➾ Settings ➙ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. Intelligent Sensor Off Minimum / Medium / Maximum Screen Off TV sensor detects the ambient lighting and automatically adjusts the screen brightness. Turns off Energy Saving mode. Applies the pre-set Energy Saving mode. Screen is turned off and only sound is played. Press any button on the remote control to turn the screen back on.
❐❐To use Sleep Timer HOME ➾ Settings ➙ TIME ➙ Sleep Timer Turns off the TV after a preset number of minutes. To cancel the Sleep Timer, select Off.
❐❐To set current time HOME ➾ Settings ➙ TIME ➙ Clock Checks or changes the time while watching TV. Auto Manual Synchronizes the TV clock to the digital time information sent by the TV station. Sets the time and date manually if the auto setup does not correspond to the current time.
❐❐To set the TV to turn on and off automatically HOME ➾ Settings ➙ TIME ➙ On Time/Off Time Sets On/Off time. Select Off on Repeat to discontinue On Time/Off Time. ✎✎ To use On Time/Off Time, set the current time correctly. ✎✎ Even when the On Time function is on, the TV will turn off automatically in 120 minutes when no button is pressed within that time.
❐❐To set Automatic Standby HOME ➾ Settings ➙ TIME ➙ Automatic Standby [Depending on model] If you do not press any button on the TV or remote control for a certain period, the TV will automatically switch to standby mode. ✎✎ This function does not work on Store Demo mode or while software update.
❐❐To set password HOME ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎✎ The initial password is set as 「0000」. When France is selected for Country, password is not 「0000」 but 「1234」. When France is selected for Country, password cannot be set as 「0000」.
❐❐To lock system HOME ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programmes by blocking channels or external input. Select the Lock System to On. Block Programme Blocks the programmes that contain inappropriate contents for children. The programmes can be selected but the screen is blank and the audio is muted. To watch a locked programme, enter the password.
Parental Guidance Input Block This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set. Enter a password to watch a blocked programme. Rating differs by country. Block the input sources.
HOME ➾ Settings ➙ OPTION ➙ Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Audio Language Subtitle Language Selects a language for the display text. [In Digital Mode Only] When watching a digital broadcast containing several audio languages, you can select the language you want. [In Digital mode Only] Use the Subtitle function when two or more subtitle languages are broadcast.
Text Language Voice Search Language [In Digital mode Only] Use the Text language function when two or more Text languages are broadcast. ✎✎ If teletext data in a selected language is not broadcast, the default Text language will be displayed. ✎✎ If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. Select the language to make voice search. ✎✎ Only the voice search adopted model can support this setting.
HOME ➾ Settings ➙ OPTION ➙ Country Sets the country that the TV uses. TV settings are changed according to the broadcast environment of the selected country. ✎✎ If the country setting is changed, the Auto Tuning information screen may appear. ✎✎ In a country that Digital broadcasting regulation isn’t fixed, some DTV functions may not work depending on digital broadcasting circumstances.
HOME ➾ Settings ➙ OPTION ➙ Disability Assistance Audio commentary or subtitles are provided for those who are hard of hearing or visually impaired. Hard of Hearing Audio Description This function is used for the hearing impaired. If it is set to on, the subtitle is displayed by default. This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio.
❐❐To register the Magic Remote Control To use the Magic Remote Control, register it with your TV first. Register Magic Remote Control as follows before use. 1 Turn on the TV and wait for about 10 seconds and then press Wheel(OK) button while pointing the remote control at the TV. 2 The remote control is automatically registered and the registration completion message appears on the TV screen. ✎✎ If you failed to register the Magic Remote Control, turn off the TV and try again.
❐❐To re-register the Magic Remote Control 1 Press the HOME and BACK buttons together for about 5 seconds. 2 Point the remote control at the TV and press Wheel(OK) button for about 5 seconds. ✎✎ Press the BACK button while pointing the remote control at the TV for five seconds to reset and re-register it.
❐❐To set the pointer of the Magic Remote Control HOME ➾ Settings ➙ OPTION ➙ Pointer Sets the speed and shape of the pointer that appears on the TV screen. Speed Sets the moving speed of the pointer. Shape Selects a pointer shape from various options. Size Chooses the size of the pointer. Set to On. If there is any misalignment between the pointer and the actual direction the remote control indicates, move the Alignment Magic Remote Control left and right to realign.
✎✎ If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote Control to the right and left. Then, it appears again. ✎✎ If you press the Navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a common remote control. ✎✎ Use within an effective distance of 33 ft. (10 metres).
✎✎ Electronic devices nearby may cause communication interference. Devices such as microwave ovens and wireless LANs use the same frequency range (2.4 GHz) as the Magic Remote Control and may cause interference. ✎✎ The Magic Remote Control may be broken if dropped or damaged in any other way. ✎✎ Take care not to bang it against other hard objects such as furniture or the floor.
❐❐To use the pattern gesture function Press the Wheel(OK) button with the normal video screen on and draw a pattern toward the screen. Previous channel: Moves back to the previous channel. Recent list: Shows channels recently watched. ✎✎ It may not work when certain windows are open.
❐❐To change TV mode HOME ➾ Settings ➙ OPTION ➙ Mode Setting Selects Home Use or Store Demo. For use at home, select Home Use. Store Demo is a mode used for store display.
❐❐To use the ISM Method HOME ➾ Settings ➙ OPTION ➙ ISM Method This function removes image sticking which is caused by prolonged display of static images. • Normal: Minimizes image sticking by gradually lowering the brightness when displaying static images and by increasing the brightness when displaying moving images. • Orbiter: Minimizes image sticking by fine-moving images left, right, up or down every 2 minutes.
• Colour Wash: Removes image sticking by moving every pixel in a certain pattern on the screen for a specific period of time. Please use this function to remove temporary image sticking. ✎✎ Image sticking is commonly known in plasma TV when it displays static images for a long time. ISM Method delays the image sticking effect; it does not completely prevent the phenomenon. Please use this function with caution.
❐❐To return to initial settings HOME ➾ Settings ➙ OPTION ➙ Factory Reset Deletes all optional settings and returns to initial default mode. Once initialization is complete, the TV will turn off and on by itself. ✎✎ If Lock System is activated, a pop-up password prompt will appear. ✎✎ Do not turn off the power during initialization.
A wireless or wired network connection is required to use Smart features. When connected to the network, you can use Premium content, LG Smart World, DLNA and more. ❐❐One-click network connection Connects easily to a wired/wireless network. HOME ➾ Settings ➙ NETWORK ➙ Network Connection to connect to an available network automatically. Follow the prompts on the TV.
❐❐To connect to a network through Set Expert HOME ➾ Settings ➙ NETWORK ➙ Network Connection For use in special circumstances such as in offices (in cases where a static IP is used). 1 Select a network connection, either Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods. AP List Enter the SSID WPS-PBC Connects to the network selected from the AP List. Connects to the wireless AP typed in.
WPS-PIN Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to the AP website. Ad-hoc Connects to a network via a wireless-enabled PC or mobile phone.
❐❐To use the Wi-Fi Screen function HOME ➾ Settings ➙ NETWORK ➙ Wi-Fi Screen Share Allows use of wireless connection functions such as Wi-Fi Direct and WiDi. Shares screen of devices connected via Wi-Fi Screen Share in Smart Share. 1 Set Wi-Fi Screen Share to On. (If you do not use it, please change it to Off.) 2 Enable the Wi-Fi Direct settings on the device that you want to connect to. 3 A list of devices that can be connected to the TV is displayed. 4 Select a device to connect.
❐❐Setting a network - warning ✎✎ Use a standard LAN cable (Cat5 or higher with RJ45 connector, 10 Base-T or 100 Base TX LAN port). ✎✎ Resetting your modem can cause network connection problems. To resolve the problem, turn the power off, disconnect and reconnect, and then turn the power back on. ✎✎ LG Electronics is not responsible for any network connection problems or any faults, malfunctions and errors caused by an network connection.
✎✎ A DSL modem is required for a DSL service; a cable modem is required for a cable service. Only a limited number of network connections may be available, and TV network setting may not be available depending on your contract with your Internet Service Provider (ISP). (If only one device is allowed per line and the PC is already connected, other devices cannot be used.) ✎✎ Wireless networks can be subject to interference from other devices operating at a frequency of 2.
✎✎ For an AP connection, an access point device that supports wireless connection is required and the wireless connection feature must be enabled on the device. Contact your service provider regarding availability of wireless connection on your access point. ✎✎ Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation for SSID and security settings of the AP.
❐❐To❐use❐Premium HOME❐➾❐Premium This service gives you easy access to a wealth of content such as news, weather, stocks, replay TV and viral video any time you are connected to the network. Premium content includes specialized country-specific services taking regional cultural sensitivities into account as well as global content. PREMIUM Search Broadcasting image Premium content Select Content that you want to use.
❐❐To use paid content A fee is payable for some Premium content. Fee-paying services are paid for either through LG Electronics' proprietary billing system or through that of the relevant content provider. Prior to using the LG billing system, you will need to sign up for membership and register payment information on www.lgappstv.com. 1 Click Sign In button on the upper-right side of the screen on the Home page to sign in. 2 Moves to the desired Premium service.
4 Once the purchasing process is complete, view your purchased content by clicking the Buy button. 5 Select your ID on upper menu of Home screen and check history of purchases from My Page ➙ Payment inquiry. It is also available on My Page ➙ Purchase History of web site (www.lgappstv.com). ❐❐To reset Premium HOME ➾ Settings ➙ SUPPORT ➙ Initialization of Premium Resets Premium list, Premium information, country setting and user sign-in information.
✎✎ Content offered by service providers are subject to change or deletion without prior notice to enhance their service quality. Refer to the website of the relevant content provider for questions, troubleshooting or the latest information about content. LG Electronics assumes no legal responsibility for content services and related information, even when a service is discontinued by the service provider. ✎✎ The quality of your Premium service may be affected by your Internet connection.
HOME ➾ Internet Types URL manually on TV or visits websites added to Favourite. Types in the web address. Chooses when you open several web browsers. Add the current page to favorites. Moves to a website that you have visited.
✎✎ Internet supports up to Flash 10 but does not support platform-dependent technology like ActiveX. ✎✎ Internet only works with a pre-installed plug-in. ✎✎ Internet may not play any media file format other than the following: JPEG / PNG / GIF / WMV (ASF) / WMA / MP3 / MP4 ✎✎ Internet will be forcibly closed when there is insufficient memory. ✎✎ For the Internet, fonts installed on the TV are used and may not be displayed normally depending on the content played.
HOME ➾ Social Center The LG Smart TV Social Center app enables you to enjoy SNS services such as Facebook or Twitter while watching TV. With Social Center app, you can communicate with friends and view messages and photos posted by your SNS contacts all at once. 1 Sign in to your LG TV account or if not a member, sign up first. 2 Sign in to the desired service (Facebook or Twitter) or if not a member, create an account first. 3 Check SNS services and post messages while watching TV.
SOCIAL CENTER Toggles Facebook/Twitter.
✎✎ If there is no Social Center app on the My Apps, install one from LG Smart World. ✎✎ Log on to the SNS services on your smartphone using the LG Magic Remote app for greater convenience when typing in text messages. The app is available in the Google Play Store or the Apple App Store.
Sign-up is required to use LG Smart World. Membership to use free apps: Sign up at TV or PC. Membership to purchase paid apps: Sign up only at PC. Problem Solution When entering menu, the "Initializing" message always appears. • The “Initializing” message appears while the microprocessor and hardware are rebooted, network communications are set up, and communication with SDP (device authentication and basic information download) is established. This takes about 20 seconds and is a normal process.
Problem Solution While using internet features, some websites contain empty spaces. • The TV's internet supports up to Flash 10 and only plays files in the following formats : JPEG, PNG, GIF, WMV (ASF), WMA, MP3, MP4 Internet closes automatically when visiting a website. • The internet may be forced to close if memory is insufficient for the volume of information on a web page. I have already signed up on the TV. Do I need to sign up again on the website (www.lgappstv.
Problem Can each family member use a different ID on a single TV? Solution • You can register and use more than one ID on one TV. • You can view the IDs registered on the TV in HOME ➾ Settings ➙ OPTION ➙ Smart TV Setting ➙ ID List. • You can check the list of apps purchased by each ID. However, you can see all apps installed by each ID in My Apps. • If you signed up via a PC, use the "Forgot ID?" feature on the website (www.lgappstv.com).
Problem Solution I purchased an app from the website (www. lgappstv.com). How can I use it on the TV? • If you want to check an app you purchased on the TV, sign in and view it on the Purchased Apps menu. Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. Can I see my purchased apps history? • Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. • Sign in to the website (www.lgappstv.com) and select My Page ➙ Purchase History.
Problem Solution • Check if the TV model supports LG Smart World. • Apps from LG Smart TV's LG Smart World can only be run Can I use apps from LG on LG Smart TV. Smart TV's LG Smart • Also, you can purchase apps from the website (www. World on both TV and PC? lgappstv.com) but cannot use them on PC or Mac so be careful when purchasing them. How can I find out which ID is currently signed in to the TV? • Select the ID at the top of Home and check the currently signed-in ID in My Page ➙ My Information.
Problem The app size shown on screen differs from the actual app size installed on the TV. I forgot my TV password. What should I do? Solution • The app size shown on screen includes the additional space needed for installing apps and may differ from the app size as actually installed. • If you only have the TV account, you cannot recover your password when it is lost. Create a new ID and log in with the ID.
Problem Solution Do I need to store payment information on the website to purchase paid apps? • To purchase paid apps from your TV, you will need to enter payment method information on the website (www. lgappstv.com). If you do not wish to store payment information, you can use the quick payment service. However, the quick payment service is only available on the website and paid apps cannot be purchased from the TV unless payment information is stored on the website.
Problem I am resistered as a member, but I cannot purchase paid apps. Solution • Log in with the ID you created on your PC and add your payment information. Then, log out from TV and log in again so you can buy paid apps.
❐❐To view 3D images 3D imaging is a technology that utilizes the slight difference in the left and right eyes to make images on TV look just like real-life 3-dimensional space. 1 Play a 3D image title or turn to a 3D programme. 2 Press 3D button to change to 3D imaging. 3 Turn on the 3D glasses and put it on. 4 To end 3D image viewing, press the 3D button on the remote control while viewing 3D images. ✎✎ Depending on the input signal, available 3D type may differ.
❐❐To adjust details of 3D images HOME ➾ Settings ➙ PICTURE ➙ 3D Settings Adjusts various aspects of 3D imaging. 3D Mode 3D Sound Zooming 3D Pattern Recognition Provides appropriate 3D depth. • 3D Depth : Adjust 3D depth between object and background. • 3D Viewpoint : Adjust 3D image closer/farther from user. Provides the 3D-optimised sound. Converts to 3D screen automatically by analysing the pattern of the original screen.
Normal Image View The 3D effect is removed leaving a 2D image. 3D Image Correction Switches left/right images of 3D video. 3D Wizard Optimizes 3D mode with 3D Wizard menu.
❐❐Viewing 3D images - warning ✎✎ When viewing 3D images, it is recommended that the viewer maintain a distance of at least twice the screen's diagonal length. ✎✎ If a future 3D broadcasting format that is not supported by this TV becomes the standard, you may require an additional device such as a set-top box.
❐❐Using 3D glasses - warning ✎✎ Do not use the 3D glasses as a replacement for your own corrective glasses, sunglasses, or protective goggles. Incorrect use of 3D glasses may cause eye injuries. ✎✎ Do not store 3D glasses in extreme conditions. Exposure to excessively high or low temperatures may deform the lenses. Do not use deformed glasses. ✎✎ Do not apply pressure to 3D glasses or subject them to any impact. Subjecting 3D glasses to rough handling may damage them.
❐❐To connect a dedicated DVR USB storage device 1 Connect a USB HDD (40 GB or larger) to the HDD IN jack on the TV. The DVR function works only with the HDD IN jack. 2 USB HDD must be initialized to be used for DVR. When connecting a USB HDD that has not been initialized, select MY APPS ➾ DVR. USB Device Initialization screen appears. 3 Complete the USB HDD initialization, and set Timeshift Mode to On.
❐❐To change Timeshift mode or initialize USB storage device Wheel(OK) ➾ Option Changes DVR settings while using DVR. Timeshift Mode On: Automatically enables Timeshift Mode when the TV is turned on. Off: Disables Timeshift Mode. USB Device Initialization The connected HDD becomes available for use with DVR. All data stored on USB device will be deleted.
✎✎ Use of HDD (Hard Disk Drive) is recommended. For SSD (Solid State Drive), the number of writes/clears is limited. ✎✎ A USB HDD size of between 40 GB and 2 TB is recommended. ✎✎ After USB Device Initialization the USB HDD will not be recognized on a PC. ✎✎ Data stored on the USB device may be damaged. Data maintenance is the user's responsibility and the manufacturer is not responsible for data loss. ✎✎ If there is problem with a data sector on the USB storage device, it may not work properly.
DVR enables you to record live TV on a USB storage device while viewing a digital broadcast. You can watch segments of the programme you missed later and resume viewing from where you left off, even if you have been away from TV for a while. ✎✎ The Timeshift mode can be set up to 90 minutes. (For Italy, it can be set for up to 60 minutes.) ✎✎ If there is problem with a data sector on the USB storage device, it may not work properly.
Press Wheel(OK) during DVR. Selects the desired point and plays Switches to current broadcast Recording starts Live TV Recorded TV Schedule List Changes Timeshift Mode Initialize USB Device Schedule Option Starts recording from DVR play control Checks defined current point schedule list Shows recorded programmes Sets schedule ✎✎ Image shown may differ from your TV.
❐❐To start recording straight away Wheel(OK) ➾ Recording Starts Records a programme when you need to leave the room during viewing. ✎✎ Only records the digital broadcast you are currently watching. ✎✎ If you force your TV to power off while recording, the program may not be saved. Ideally, you should stop the recording and check that the program has recorded before turning it off.
❌❌To stop recording Wheel(OK) ➾ Recording Stop Stops recording immediately. ❌❌To modify recording end time Wheel(OK) ➾ Stop Option ➙ Recording end time modify ✎✎ Maximum recording time is 5 hours.
❐❐To schedule recording Wheel(OK) ➾ Schedule Select schedule by programme Selects a programme from the Programme Guide screen for viewing or recording. Select schedule by date Selects date, time, and programme for viewing or recording. ✎✎ The minimum length of Timer Recording is 2 minutes. ✎✎ A damaged disk sector may affect some or all of the items on the Schedule List. ✎✎ The maximum number of items in the Schedule List is 30.
❐❐To assure and / or modify schedule list Wheel(OK) ➾ Schedule List Assures, modifies or deletes the scheduled viewing or recording.
❐❐To see Recorded TV HOME ➾ Smart Share ➙ Recorded TV Selects the recording stored in USB HDD to view / delete it. Play on previous playtime Play from the start Delete For a recording once-played in the past, plays it from the previous playtime. Plays the selected recording from the start. Deletes the selected recording. ✎✎ The maximum number of Recorded TV is 300.
❐❐To control recording playback Press Wheel(OK) button on the remote control during playback. Selects the desired point and plays. Thumbnail List Plays Control Clip-Edit Sets Recording Playback Option Repeat Thumbnail List Clip-Edit/Repeat ✎✎ Image shown may differ from your TV.
❐❐To use MemoCaster HOME ➾ MemoCaster This function displays user-created content on the TV screen. You can leave messages for your family or set up alarms for specific events in your schedule. You can create your own content using the templates Advanced provided. Use this function to create advertisements or notices.
❐❐To use MemoCaster Simple HOME ➾ MemoCaster ➙ Simple You can display memos on TV screen or set up alarms for specific events in your schedule. ✎✎ Options Notification when TV is turned on • On: Displays a memo when TV is turned on. • Off: Displays a memo at a specified time. Date and Time Configuration, Weekly Repeat, and Alarm Count can be set. Except for Weekly Repeat, the time should be later than the current time.
❐❐To use MemoCaster Advanced HOME ➾ MemoCaster ➙ Advaned You can create your own content using the templates provided and display it on TV screen. 1 Select a template you want. Select Text/LED to change the template mode. 2 Edit images and text. The area where the picture will be shown. Select a picture you want. ✎✎ Place the picture in the "lg_img" folder of USB.
The area where text will be shown, Enter your message. Option Set the background colour, font colour, and font size. History Import the text recently used. Effect Add animation or LED effect to the content you created. Play Setup Set the start time, end time or weekly repeat of the memo to be displayed.
3 Select Complete. Then, the edition is complete and your content is saved. 4 Start the content you just created.
❐❐To use the Pentouch function 1 Turn the touch pen’s power on and switch to touch mode. (The touch pen icon will appear and disappear at the top of the screen.) 2 Press the TOUCH HOME button of the touch pen or touch the TV screen using the touch pen to select Touch Home. (Or select My Apps ➙ Pentouch on the Home screen.) ✎✎ The Pentouch function only works with the touch pen.
❌❌To use the Pentouch function (continued) Shows the remaining battery of the touch pen Quick owner's manual for Pentouch Pentouch Sketch GUIDE My Gallery Office Viewer Internet Setup Smart Home PC Link You can import a picture or select the USB device path to save it.
❐❐To use the drawing toolbar If you select drawing mode on My Gallery, Office Viewer, Internet, the drawing toolbar appears at the bottom of the screen. ✎✎ Save is available only when a USB device is connected.
❌❌To use the drawing toolbar (continued) ✎✎ If multiple pictures overlap each other, the eraser may function slower than normal. ✎✎ Cut/Move/Resize/Rotate can only be used for a single drawing object. ✎✎ If you use two touch pens, the drawing toolbar shows the setting of the touch pen that you used last.
❐❐To use Sketch My Apps ➙ Pentouch ➙ Sketch Location of the current sketch You can draw pictures in two pages.
❐❐To use My Gallery My Apps ➙ Pentouch ➙ My Gallery ✎✎ You can use My Gallery only when USB storage device is connected. Connect the USB device containing image files.
❌❌To use My Gallery (continued) My Apps ➙ Pentouch ➙ My Gallery ➙ Select the picture you want Switch to the drawing mode (The drawing toolbar will appear.
❐❐To use Office Viewer My Apps ➙ Pentouch ➙ Office Viewer ✎✎ You can use Office Viewer only when a USB storage device is connected. Connect the USB device containing Microsoft Office (xls, xlsx, ppt, pptx, doc, docx), Adobe Acrobat (pdf) or text (txt) files. Office File Open Select office file Select the file you want.
❌❌To use Office Viewer (continued) My Apps ➙ Pentouch ➙ Office Viewer ➙ Select the file you want ✎✎ If you draw a picture on Office Viewer, it will be saved in *.jpg format. Switch to the drawing mode (The drawing toolbar will appear.
✎✎ You may not be able to open a file if it is too large. ✎✎ Some documents may look differently from the ones displayed on your PC screen. ✎✎ This function may not be available in some languages.
❐❐To use the Internet My Apps ➙ Pentouch ➙ Internet Use the Internet Use as the mouse cursor Switch to the drawing mode (The drawing toolbar will appear.
❐❐To use the PC Link function 1 Connect an external device to your TV using an RGB or HDMI cable. 2 Go to My Apps ➙ Pentouch ➙ PC Link and select the input mode in which the external device is connected. • Select the input, and then you can draw a picture using the drawing toolbar. • / : You can play or pause a video file on the external device connected to PC Link. Pentouch GUIDE Setup Select the input mode in which the external device is connected. Select external input for drawing.
✎✎ The recommended PC resolution is 1920x1080 at 60Hz. ✎✎ If nothing is displayed on the screen after selecting the input mode, check the external device connection. ✎✎ When using a PC or laptop via HDMI cable, you need to set the HDMI input name to the PC or laptop under Input List ➙ Change Device Name before entering the Home.
Download the LG Magic Remote app from Google Play Store or Apple App Store to watch TV with your smartphone. • Now you can enjoy your favourite TV shows on your smartphone. (Some models only) • Add your favourite channels on your smartphone. • You can use the functions such as PREMIUM, MY APPS directly on your smartphone. • Select an item using the TV Search function from your smartphone to watch it on TV. • Supports Text Input function, so you can enter text easier. (Text cannot be entered on some screens.
❐❐To use a USB wired/wireless mouse Connect your mouse to the USB port. Use the mouse to move the pointer on the TV screen and select the menu you want. Mouse Magic Remote Control Left Button OK Button on Magic Remote Control Wheel Button Wheel Button on Magic Remote Control ✎✎ The right and the special buttons on the mouse do not work. ✎✎ The usability of a wireless USB mouse and keyboard may be affected by Radio Frequency environment and the distance.
❐❐To use a USB wired/wireless keyboard Connect your keyboard to the USB port. You can enter text with the keyboard when using the search function and the Internet. ✎✎ Text cannot be entered on some screens. ✎✎ Applicable Keyboards It is recommended to use the product which is tested for compatibility with LG TV.
❐❐To use a game pad Connect your game pad to the USB port on the TV if the game supports the use of game pad. ✎✎ Applicable Game Pads It is recommended to use an authorized game pad which is tested for compatibility with LG TV.
HOME ➾ Settings ➙ SUPPORT ➙ Software Update Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Software Update Check Update Version Set it to On. When an updated file is detected, the file is downloaded automatically. When the file download is complete, the software update window appears. Checks the latest update version installed. When a new update is available, the download process can be performed manually.
✎✎ The latest version can be obtained via the digital broadcast signal or an internet connection. ✎✎ Changing the programme while downloading the software via a digital broadcast signal interrupts the download process. Returning to the initial programme allows downloading to resume. ✎✎ If software is not updated, certain functions may not work properly.
If the following symptoms occur, please carry out the checks and adjustments described below. There may be no malfunction. HOME ➾ Settings ➙ SUPPORT ➙ Signal Test Shows the MUX and Service information etc. If you select Antenna & Satellite or Cable & Satellite, a signal test only for Antenna or Cable is displayed. ❐❐General Problem Solution Cannot view certain programmes. • Adjust the location or orientation of the antenna.
❐❐Pictures HOME ➾ Settings ➙ SUPPORT ➙ Picture Test First run a Picture Test to verify that the image signal output is normal. If there is no problem with the test image, check external device connections and broadcast signals. Problem Images from previous programme or other programmess linger or the screen displays annoying lines. Solution • Adjust the orientation of the antenna to the TV transmitter, or refer to the manual for instructions on connecting the antenna.
Problem Solution Vibrating horizontal/vertical lines and fishnet patterns appear momentarily. • Such a problem may happen when there is strong electronic interference. Turn off other electronic devices such as mobile phones, power tools and other small electrical appliances. The screen display freezes or does not work properly during a digital broadcast. • This may occur in case of a weak signal or unstable reception. Adjust the antenna orientation and cable connections.
Problem Solution The display is inactive or unclear when connected to an HDMIⓇ source. • Check the HDMIⓇ cable specifications. If your HDMIⓇ cable is not genuine, images may fade in and out or not be displayed properly. • Ensure that all cables are securely connected. When connections are not secure, images may not be properly displayed. Does not work with a USB storage device. • Verify that the USB device and cable is version 2.0 or higher.
❐❐Sound HOME ➾ Settings ➙ SUPPORT ➙ Sound Test First run a Sound Test to verify that the sound signal output is normal. If there is no problem with the test sound, check connected external devices and the broadcast signal. Problem Solution Screen display is on but there • Check other TV programmes. is no sound. • Ensure the TV Speaker is set to On. For an analogue broadcast, stereo is not clear or sound comes from one speaker only.
Problem Solution TV sound is not in sync with the image or the sound breaks up occasionally. • If the issue affects a specific TV programme only, it may be caused by problems with the broadcast signal for the individual station. Check with the TV station or your cable operator. The volume changes when I change programme. • Volume can vary from programmel to programme. • Set Auto Volume to On.
Problem Solution On certain programmes, there • In Language, set Language ➙ Audio Language to is no sound at all, or only the the language of your choice. Even if you change the background music can be language on Multi Audio, you can go back to the heard default setup once you turn off the power or change (in case of a programme the programme. created for overseas viewers). There is no sound when connected to HDMI / USB. • Verify that the HDMIⓇ cable is high speed.
❐❐PC connection problem Problem Solution The screen display does not come on after connecting to the computer. • Verify that the computer and the TV are securely connected. • Turn the TV off and back on using the remote control. • Restart the PC with the TV on. • Check whether the resolution is correctly set for PC input. • To use the TV as a secondary monitor, check if the connected desktop or laptop supports dual monitor display. • Reconnect the RGB/HDMI cable.
Problem When connected to the computer, the display is partially cut off or shifts to one side. Solution • Set the resolution to support PC input. (If this does not work, reboot the computer.) • Select Screen and adjust Position / Size / Phase.
❐❐Problems replaying movies in My Media Problem I cannot view the files on the Movie List. Solution • Check whether the file on the USB storage device can be read on a computer. • Check whether the file extension is supported. • Make sure that the file replays normally on the "This file is invalid." computer's video player. (Check for damaged files.) message appears or the • Check whether the resolution is supported by the image display is not normal computer.
Problem "Audio not supported." message appears or the sound is not normal even though the image display is OK. Solution • Make sure that the file replays normally on the computer's video player. (Check for damaged files.) • Check if the audio codec is supported by the computer. • Verify that the bit rate is supported. • Verify that the sample rate is supported.
Problem Solution Subtitles are not displayed. • Make sure that the file replays normally on the computer's video player. (Check for damaged files.) • Check if the video file has the same name as the subtitle file. • Make sure that the video and subtitle files are in the same folder. • Verify that the subtitle file format is supported. • Verify that the subtitle language is supported. (Subtitle files can be opened in Notepad to check the language.) ✎✎ Image shown may differ from your TV.
RUSSIA only The working life of this set is 7 years since the date of delivery to consumer. только для РΟССИИ %= Cpok cлужбы дaннoгo тoвapa - 7 лeт co дня пepeдaуи тoвapa пoтpeбитeлю Україна обмеження на наявність небезпечних речовин Устаткування відповідає вимогам технічного регламенту щодо обмеженного використання небезпечних речовин в електричному і електронному обладнанні.
❐❐EU Conformity Notice LG Electronics hereby declares that this product is in compliance with the following Directives. R&TTE Directive 1999/5/EC EMC Directive 2004/108/EC LOW VOLTAGE Directive 2006/95/EC The products described above comply with the essential requirements of the directives specified. This device is a 2.4 and 5 GHz wideband transmission system, intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz.
CE Notified Body statement: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Explosive device proximity warning – Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use.
❐❐Information for recycling (take-back offer) This product may contain parts which could be hazardous to the environment. It is important that this product be recycled after use. LGE handles all waste products through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method.
❐❐Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery.
For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local authority, your household waste disposal service or the shop where you purchased the product.
❐❐Energy Saving Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills. The following indications allow to reduce power consumption when the television is not being watched: • turning the television off at its mains supply, or un-plugging it, will cut energy use to zero for all televisions, and is recommended when the television is not being used for a long time, e.g.