ENGLISH PLASMA TV OWNER’S MANUAL PLASMA TV MODELS 4 2 P Q 1 0* * 4 2 P Q 6 0* * 5 0 P Q 1 0* * 5 0 P Q 6 0* * 4 2 P Q 1 1* * 5 0 P S 2 0* * 5 0 P Q 1 1* * 5 0 P S 3 0* * 4 2 P Q 2 0* * 5 0 P S 6 0* * 5 0 P Q 2 0* * 6 0 P S 4 0* * 4 2 P Q 3 0* * 5 0 P Q 3 0* * Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) I D N u m b e r ( s ) : 6551 : 42PQ1000-ZA 6549 : 50PQ1000-ZA 6630 : 42PQ1000-ZD 6631 : 50PQ1000-ZD 6632 : 42PQ1100-ZE 6633 : 50PQ1100-ZE 6023: 42PQ2000-ZA 6320 : 42PQ2010-ZB 602
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ACCESSORIES ENER AV V MO DE ENER GY GY SAV IN G RAT IO PO W ER SAVIN G LIS T Owner's Manual M UT E Q.V IEW or ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. ME NU Q.M EN U RETU RN IN FO FR / EX EE ZE IT i GU ID E MA R FA K V Owner’s Manual Batteries Remote Control x2 x4 Power Cord Protection Cover (Refer to p.
CONTENTS ACCESSORIES ........................................ 1 PREPARATION CONTENTS Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . . . . . . . 6 Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back Cover for Wire Arrangement . . . . . . . . . . . . . 8 Desktop Pedestal Installation . . . . . . . . . . . . . . . . 8 Careful installation advice . . . . . . . . . . . . . . . . . . .
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Image Sticking Minimization (ISM) Method . . . 82 Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Mode Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . 85 Preset Sound Settings - Sound Mode . . . . . . . . 86 Sound Setting Adjustment -User Mode . . . . . . 87 SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . 87 Clear Voice II .
PREPARATION FRONT PANEL CONTROLS ■ Image shown may differ from your TV. CAUTION G When PREPARATION the TV cannot be turned on with the remote control, press the main power button on the TV (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control.) 42/50PQ11**, 42/50PQ30**, 50PS30** Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions.
P PROGRAMME P VOLUME PREPARATION UT 42/50PQ60**, 50PS60** OK OK Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator • Illuminates red in standby mode. • The LED is off while the TV remains on. MENU OK MENU MENU INPUT INPUT POWER POWER P 60PS40** Remote Control Sensor POWER Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on.
PREPARATION A USB IN SERVICE ONLY BACK PANEL INFORMATION Image shown may differ from your TV. PREPARATION USB IN SERVICE ONLY 42/50PQ10**, 42/50PQ11** 1 7 3 USB IN SERVICE SER VICE ONLY ONL 2 8 HDMI IN (CONTROL & SERVICE) 4 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 2 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component.
HDMI IN 3 10 1 11 3 4 HDMI IN 3 2 2 1 VARIABLE AUDIO OUT HDMI/DVI IN 5 6 7 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 2 RGB/DVI Audio Input Connect the audio from a PC or DTV. 3 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT STAND INSTALLATION (Except for 60PS40**) ■ PREPARATION Image shown may differ from your TV. ■ When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. 1 ■ Image shown may differ from your TV.
CAREFUL INSTALLATION ADVICE A You should purchase necessary components to fix the TV safety and secure to the wall from the market. A Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage.
PREPARATION ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42PQ30** models. ■ ■ Image shown may differ from your TV. ■ HD RECEIVER SETUP ■ This TV can receive Digital RF/Cable signals without an external digital set-top box.
EXTERNAL EQUIPMENT SETUP Connecting a set-top box with an HDMI cable 1 Connect the digital set-top box to H D M I / D V I I N 1, H D M I I N , H D M I I N 2 or H D M I I N 3 jack on the TV. HDMI IN 2 EXTERNAL EQUIPMENT SETUP 2 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 1 HDMI/DVI IN Select H D M I 1, H D M I 2 or H D M I 3 input source using the I N P U T button on the remote control. 1 ! NOTE G Check that your HDMI cable is version 1.3 or higher.
DVD SETUP Connecting with a component cable (Except for 42/50PQ10**, 42/50PQ11**) 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. 1 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. 3 Turn on the DVD player, insert a DVD. 2 4 Select C o m p o n e n t input source using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP Connecting with a Euro Scart cable EXTERNAL EQUIPMENT SETUP 1 Connect the Euro scart socket of the DVD to the A V 1 Euro scart socket on the TV. 2 Turn on the DVD player, insert a DVD. 3 Select A V 1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select A V 2 input source. 4 1 Refer to the DVD player's manual for operating instructions.
Connecting with a S-Video cable (Except for 42/50PQ10**, 42/50PQ11**) Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. 3 Turn on the DVD player, insert a DVD. 4 Select A V 3 input source using the I N P U T button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP VCR SETUP ■ To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connecting with a RF Cable EXTERNAL EQUIPMENT SETUP ANT OUT S-VIDEO ANT IN OUTPUT SWITCH VIDEO L R 1 2 Wall Jack Antenna Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV. 2 Connect the antenna cable to the A N T I N socket of the VCR.
Connecting with a Euro Scart cable Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select A V 1 input source using the I N P U T button on the remote control. 4 If connected to A V 2 Euro scart socket, select A V 2 input source.
(Except for 42/50PQ10**, 42/50PQ11**) 1 V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) EXTERNAL EQUIPMENT SETUP 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select A V 3 input source using the I N P U T button on the remote control.
INSERTION OF CI MODULE - To view the encrypted (pay) services in digital TV mode. - This item is not included for all countries. 1 1 EXTERNAL EQUIPMENT SETUP Insert the CI Module to P C M C I A (Personal Computer Memory Card International Association) C A R D S L O T of TV as shown. HDMI IN 3 For further information, see p.44. S-VIDEO ! NOTE G Check if the CI module is inserted into the PCMCIA card slot in the right direction.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP (Except for 42/50PQ10**, 42/50PQ11**) V I D E O jacks between TV and Connect the A U D I O/V external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) Select AV3 input source using the I N P U T button on the remote control. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
PC SETUP(Except for 42/50PQ10**, 42/50PQ11**) This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable HDMI IN 2 Connect the RGB output of the PC to the R G B I N ( P C ) jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 3 Turn on the PC and the TV 4 Select R G B input source using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution HDMI/DVI-DTV mode RGB-PC, HDMI/DVI-PC mode EXTERNAL EQUIPMENT SETUP 22 Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 70.08 640x480 31.469 59.94 31.469 60 31.47 59.94 31.50 60 720x576 31.25 50.00 1280x720 37.50 50.00 44.96 59.94 45.00 60 28.125 50.00 33.72 59.94 33.75 60 27.00 24.00 640x480 31.469 59.94 800x600 37.879 60.
! NOTE G G G G We recommend using 1024x768, 60Hz (42PQ20**, 42PQ30**, 42PQ60**) / 1360x768, 60Hz ( 50PQ20**, 50PQ30**, 50PQ60**) / 1920x1080, 60Hz(50PS20**, 50PS30**, 50PS60**, 60PS40**) for the PC mode, they provide the best picture quality. G G G G G G Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). If using a sound card, adjust PC sound as required.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode (Except for 42/50PQ10**, 42/50PQ11**) Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. EXTERNAL EQUIPMENT SETUP PICTURE Move SCREEN OK E • Contrast 100 • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 RETURN Prev. Auto Config.
Auto Configure (RGB [PC] mode only) Automatically adjust the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. SCREEN PICTURE Move RETURN Prev. Resolution E • Contrast Move OK 100 • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 Auto Config.
EXTERNAL EQUIPMENT SETUP Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] EXTERNAL EQUIPMENT SETUP SCREEN PICTURE Move Resolution E • Contrast Move G 100 • Brightness 50 • Sharpness 70 • Colour • Tint Auto Config. 1024 x 768 1280 x 768 1360 x 768 Position 70 0 RETURN Prev.
Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. Move SCREEN OK RETURN Prev. Move E • Contrast Resolution 100 • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 Auto Config.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS (Only 42/50PQ10**, 42/50PQ11**, 42/50PQ20**, 42/50PQ30**) When using the remote control, aim it at the remote control sensor on the TV. POWER POWER SAVING POWER SAVING V MODE AV MODE 1 TV/RAD Selects Radio, TV and DTV channel. POWER AV MODE It helps you select and set images and sounds when connecting AV devices.(G p .
POWER POWER SAVING POWER SAVING V MODE AV MODE VOLUME UP Adjusts the volume. /DOWN POWER ENERGY SA SAVING VING AV V MODE Q.VIEW POWER POWER SAVING AV MODE MUTE LIST Q.VIEW MUTE LIST Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one. SIMPLINK / Controls SIMPLINK or USB menu(Photo List and Music USB Menu List or Movie List(Only 42/50PQ60**, 50PS60**)). control buttons Q. MENU Select the desired quick menu source.
WATCHING TV / PROGRAMME CONTROL (Except for 42/50PQ10**, 42/50PQ11**, 42/50PQ20**, 42/50PQ30**) ENERGY SAVING Adjust the power saving mode of the TV.(G p . 7 3) ENERGY SAVING RATIO Selects your desired picture format.(G p . 7 1) POWER Switches the TV on from standby or off to standby. RATIO INPUT External input mode rotate in regular sequence.(G p . 4 6) TV/RAD Selects Radio, TV and DTV channel. WATCHING TV / PROGRAMME CONTROL Q. MENU Select the desired quick menu source.
ENERGY SAVING VOLUME UP Adjusts the volume. /DOWN RATIO MARK Check and un-check programmes in the USB menu. FAV Displays the selected favourite programme. MUTE Switches the sound on or off. PAGE Move from one full set of screen information to the next UP/DOWN one. 0~9 number Selects a programme. button Selects numbered items in a menu. LIST Displays the programme table.(G p . 4 5) Q.VIEW Returns to the previously viewed programme.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV - When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly and check the main power( r / I ) on the TV. 2 Set ID : Off In standby mode to turn TV on, press the INPUT or P D E button on the TV or press the POWER button on the remote control and the TV will switch on.
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. • A s p e c t R a t i o: Selects your desired picture format. • A u d i o : Selects the sound output. • S l e e p T i m e r : Sets the sleep timer. • U S B E j e c t : Selects “USB Eject” in order to eject USB For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.
WATCHING TV / PROGRAMME CONTROL ON-SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 500. But the number may differ slightly depending on broadcasting signals.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. WATCHING TV / PROGRAMME CONTROL SETUP Move SETUP OK Auto Tuning Auto Tuning Manual Tuning Manual Tuning Programme Edit Software Update Programme Edit : On Software Update Diagnostics Diagnostics CI Information CI Information Move OK F DTV G Your receiver will add this channel to your channel list. : UHF On CH.
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP Move SETUP OK Move Auto Tuning Auto Tuning Manual Tuning Manual Tuning Programme Edit Programme Edit : On Software Update Diagnostics Diagnostics CI Information CI Information TV F Storage G 3 : OnSystem BG Band V/UHF Channel 0 Search F G Name C 02 Store Close 1 MENU 2 OK Select S E T U P. Select M a n u a l T u n i n g.
WATCHING TV / PROGRAMME CONTROL SETUP Move OK SETUP Auto Tuning Auto Tuning Manual Tuning Manual Tuning Programme Edit Programme Edit Software Update : On Software Update Diagnostics Diagnostics CI Information CI Information Move OK TV F Storage G 3 : OnSystem BG Band V/UHF Channel 0 Search F G Name C 02 Store Close WATCHING TV / PROGRAMME CONTROL A Assigning a station name You can assign a station name with five characters to each programme number.
PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. In some countries it is possible to move a programme number by using the YELLOW button only.
WATCHING TV / PROGRAMME CONTROL (IN DTV/RADIO MODE) A Skipping a programme number 1 Select a programme number to be skipped. 2 BLUE Turn the skipped programme number to blue. 3 BLUE Release the skipped programme. WATCHING TV / PROGRAMME CONTROL 40 A • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing.
IN TV MODE This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers. A Auto Sort 1 GREEN Start Auto Sort. A • After activating Auto Sort once, you can no longer edit programmes. Deleting a programme Select a programme number to be deleted. • The selected programme is deleted, all the fol- lowing programmes are shifted up one position. 2 RED Turn the deleted programme number to red. 3 RED Release the deleted programme.
WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP SETUP Auto Tuning Move OK Manual Tuning WATCHING TV / PROGRAMME CONTROL 1 MENU Programme Edit On :: On Diagnostics Diagnostics CI Information CI Information Select O n or O f f. • If you select O n, a user confirm message box will be displayed to notify that new software is found. 3 OK 4 Select S o f t w a r e U p d a t e.
DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.)) Move Manufacturer : LG Electronics Inc. Model/Type : 50PQ3000-ZA Serial No. : SKJY1107 Software Version : V1.16.
WATCHING TV / PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction.
SELECTING THE PROGRAMME TABLE You can check which programmes are stored in the memory by displaying the programme table Displayed when the Locked Programme. A Displaying programme LIST Display the Programme List. LIST A 2 Select a programme. OK TV/RAD From the programme you are currently watching, the mode will change from TV to DTV to Radio. Switch to the chosen programme number.
WATCHING TV / PROGRAMME CONTROL INPUT LIST HDMI and AV1, 2 (SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using T V / R A D button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode.
(Except for 42/50PQ10**, 42/50PQ11**) This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. O f f”. If you do not want SIMPLINK menu,select “O SIMPLINK function is not supported by HDMI IN 3 input.
WATCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. 1 Connect the H D M I / D V I I N 1or H D M I I N 2 terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables. HDMI IN 2 1 2 Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables. 3 Select Home Theater in the Speaker menu by pushing the S I M P L I N K button.
DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between M H E G ( D i g i t a l T e l e t e x t ) and T e l e t e x t if both exist at the same time. If only one of them exists, either M H E G or T e l e t e x t is enabled regardless of which option you selected.
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game WATCHING TV / PROGRAMME CONTROL 1 AV MODE Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. Off Cinema Game Sport Press the AV MODE button repeatedly to select the desired source.
SIMPLE MANUAL You can easily and effetively access the TV information by viewing a simple manual on the TV. During the Simple Manual opreration, audio will be muted. Move WATCHING TV / PROGRAMME CONTROL OPTION OK E Country : UK Input Label SIMPLINK : On Key Lock : Off Simple Manual Manual Simple Set ID :1 ISM Method : Normal Demo Mode : Off E 1 MENU Select OPTION. 2 OK Select Simple Manual. OK Select the part of the manual you want to see.
WATCHING TV / PROGRAMME CONTROL Initializing (Reset to original factory settings) This function initializes all settings. D a y and N i g h t of the P i c t u r e M o d e cannot be initialized. But the settings of It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. O n", the message to enter the password appears.
TO USE A USB DEVICE It is not possible to use USB function in 4 2 / 5 0 P Q 1 0* * , 4 2 / 5 0 P Q 1 1* * models. G When connecting a USB device When you connect a USB device, this pop up menu is displayed, automatically. If the Pop Up menu does not appear, you can select Music List or Photo List or Movie List(Only 42/50PQ60**, 50PS60**) in the USB menu. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated.
TO USE A USB DEVICE ! NOTE ■ G Image shown may differ from your TV. In order to avoid losing the USB memory stick, use the USB connector(sold separately) to fix the USB memory stick to the USB connector holder of the TV. USB connector holder USB Input Port USB Connector (sold separately) - Fix the one end of the USB connector to the USB memory stick and the other end to the USB connector holder. TO USE A USB DEVICE PHOTO LIST The On Screen Display may be different from your TV.
Photo Selection and PopUp Menu USB Device Photo List Page 2/3 Drive1 1366x768, 125KB Free Space 150MB Up Folder KR103 KR101 KR104 KR102 KR105 JMJ001 JMJ005 JMJ002 JMJ006 JMJ003 JMJ007 JMJ004 Up Folder Navigation No Marked Option P JMJ008 Page Change MARK Mark RETURN Exit Photo List Page 2/3 Drive1 No Marked Free Space 150MB Up Folder KR103 KR101 KR102 JMJ001 JMJ002 1366x768, 125KB Up Folder Navigation 1 View : Display the selected item.
TO USE A USB DEVICE Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen.
6 OK Select the Slideshow , B G M, D e l e t e , Option or H i d e. • Use (Rotate), button to select the previous or next photo. 1/17 Slideshow BGM Delete Option Hide • Use button to select and control the menu on the full-sized screen. S l i d e s h o w : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed during slide show. ■ Set the time interval of the slide show in O p t i o n.
TO USE A USB DEVICE MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 ~ 320kbps • Sampling rate MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz. TO USE A USB DEVICE Screen Components 1 MENU 2 OK Select U S B.
Music Selection and PopUp Menu As shown , up to 6 music titles are listed per page.
TO USE A USB DEVICE TO USE A USB DEVICE 60 ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. ! NOTE When music is playing, is displayed in back of the music title. G A damaged or corrupted music does not play but displays 00:00 in playtime.
MOVIE LIST (Only 42/50PQ60**, 50PS60**) The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. Video editing is not supported but files can be deleted. It is a movie list that displays folder information and Divx file. Supports up to four drives.
TO USE A USB DEVICE Screen Components 1 MENU 2 OK Select U S B. Select Movie List OK 2 1 Moves to upper level folder 2 Current page/Total pages 3 TO USE A USB DEVICE Total number of marked movie title 4 Usable USB memory 5 Corresponding buttons on the remote control 3 4 USB Device Movie List Page 2/3 No Marked movie Free Space 1.
Movie Selection and PopUp Menu As shown , up to 6 movie titles are listed per page. USB Device Movie List Page 2/3 No Marked movie Free Space 1.8GB Duration Title Up Folder M001 M002 M003 704 x 400, 34MB Navigation 01:15:30 M005 01:30:20 Option Page Change MARK Mark RETURN Exit USB Device Movie List Page 2/3 No Marked movie Free Space 1.
TO USE A USB DEVICE DivX Audio Language & Subtitle Language Picture Size F Subtitle Language Full Screen G 0 Audio Language 1/1 Subtitle File 0 . Language Latin 1 . Sync 0 . Position 0 OK TO USE A USB DEVICE 1 • When DivX is playing, if you press the Select the desired option. R E D button, this message is displayed. 2 Select P i c t u r e S i z e , S u b t i t l e L a n g u a g e , Audio Language, Subtitle File, L a n g u a g e , S y n c or P o s i t i o n .
DIVX REGISTRATION CODE (Only 42/50PQ60**, 50PS60**) Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) USB Move OK USB Photo List Photo List Music List Music List Movie List Movie List DivX DivX Reg. Reg.
TO USE A USB DEVICE DEACTIVATION (Only 42/50PQ60**, 50PS60**) Delete the existing authentication information to receive a new DivX user authentication for TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files. USB Move OK USB Photo List Photo List Music List Music List Movie List Movie List DivX Reg. Code Deactivation Deactivation DivX Reg.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. Programme Guide RED Change EPG mode. 1 YLE TV1 NOW 1 YLE TV1 YELLO YELLOW Enter Timer Record/Remind setting mode. NEXT That ’70s show 2 YLE TV2 Your World Today 4 TV.. Legenen om Den.... Naturtimmen Lyssna Glamour 5 YLE FST 6 CNN BLUE Enter Timer Record/Remind list mode.
Button Function in Date Change Mode GREEN Switch off Date setting mode. Programme Guide 1 YLE TV1 Change to the selected date. E OK 14:00 1 YLE TV1 2 YLE TV2 4 TV.. Select a date. 6/ Mar 2006 15:09 6/Mar(Mon) ALL 5 YLE FST 6 CNN 8 YLE24 ... 15:00 Kungskonsumente No Information No Information TV2: Farmen No Information No Information No Information No Information ... ... ... Tänään otsikoissa E Date. Change Date Exit Switch off Date setting mode. GUIDE or Switch off EPG. Text Up/Down.
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets a reminder only for a start time, with the end time grayed out. - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT(AV2) terminal, using a SCART cable. OK Save Timer Record/Remind.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9, Zoom, Cinema Zoom and Full Wide. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1Q. MENU Select A s p e c t R a t i o. • You can also adjust Aspect Ratio in the P I C- T U R E menu.
PICTURE CONTROL • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. • Cinema Zoom Choose Cinema Zoom when you wish the picture to be altered, both horizontally extended and vertically cropped.
ENERGY SAVING / POWER SAVING It reduces the plasma display’s power consumption. The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. In P i c t u r e M o d e - C i n e m a, You cannot adjust E n e r g y S a v i n g or P o w e r S a v i n g.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Standard Cinema Sport Game Enhances contrast, colour and resolution. Displays the standard-quality screen. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option • Contrast Adjusts the difference between light and dark levels in the picture. • Brightness Increases or decreases the amount of white in the picture. • Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. • Colour Adjusts intensity of all colours. • Tint Adjusts the balance between red and green levels.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustment to each video mode, execute the “Picture Reset” function for each Picture Mode.
■ Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The resolution of gradation is improved by making bright parts brighter and dark parts darker.
PICTURE CONTROL Expert Picture Control By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. As the detail item for video quality experts to fine tune the video using specific videos, this may not be effective for general videos.
■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The resolution of gradation is improved by making bright parts brighter and dark parts darker. This feature refers to dynamic contrast, and enhances the feeling of presence that contrast controls are intended to give by using dimming and other input signals. ■ Reduces screen noise without compromising video quality. This feature is also used to reduce recursive noise and MPEG noise (Mosquito/Block).
PICTURE CONTROL White Balance (Medium/Warm/Cool) • Adjust white balance. ■ Pattern (Inner/Outer) • Decide whether to use the Internal Pattern or External Pattern when adjusting white balance. ■ White Balance (Medium/Warm/Cool) Red Gain/Green Gain/Blue Gain • Adjust high-level white balance. ■ Red Offset/Green Offset/Blue Offset • Adjust low-level white balance. ■ Colour Management System PICTURE CONTROL 80 Colour (Red/Green/Blue/Yellow/Cyan/Magenta) • Adjust colour saturation by area.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE OK E 100 • Contrast 100 • Brightness 50 • Brightness 50 • Sharpness 70 • Sharpness 70 • Colour 70 • Tint 0 i R G R 0 G • Picture Reset Screen Select P I C T U R E. PICTURE CONTROL • Advanced Control • Picture Reset Screen • Colour 70 Resetting video configuration... • Tint • Advanced Control 1 MENU OK E • Contrast Move 2 OK Select P i c t u r e R e s e t.
PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
DEMO MODE Use it to see the difference between XD Demo on and XD Demo off. OPTION Move OPTION OK E : UK Country Input Label : UK Input Label SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual :1 Set ID ISM Method Demo Mode Mode Demo : Normal Off :: Off ISM Method :1 : Normal Off Demo Mode Mode Demo Off :: Off On E Select O P T I O N. 2 OK PICTURE CONTROL Set ID E 1 MENU OK E Country Move Select D e m o M o d e.
PICTURE CONTROL MODE SETTING We recommend setting the TV to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is an optimal setting for displaying at stores. Mode Setting OPTION Move OK E Selecting the environment. Choose the setting mode you want.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Standard Music Cinema Sport Game Offers standard-quality sound.
SOUND SETTING ADJUSTMENT -USER MODE AUDIO Move Auto Volume Clear Voice I I Balance - + 0 L R : Standard (User) 2 OK OK : Off Clear Voice I I 3 : On • Level Balance 3 - 0 • SRS TruSurround XT : • Treble 50 • Treble 50 - • Bass 50 • Bass 50 - E + Standard Standard (User) Sound Mode Mode :: Standard Standard (User) Sound • SRS TruSurround XT : On E 1 MENU Move Auto Volume : On • Level Sound Mode AUDIO OK : Off On- Music Cinema Sport + + + Game Select A U D I O.
SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better.
TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In A V 1, A V 2, A V 3(Except for 42/50PQ10**, 42/50PQ11**), C O M P O N E N T(Except for 42/50PQ10**, 42/50PQ11**), R G B(Except for 42/50PQ10**, 42/50PQ11**) and H D M I 1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV internal speakers.
SOUND & LANGUAGE CONTROL SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM(Pulse-code modulation).
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. Move AUDIO OK E • Level Balance Sound Mode Clear Voice I I : On 3 - + 0 L R • Treble 50 • Bass 50 - • Reset E 2 OK 3 - + 0 L R : Standard + • Treble 50 - + + • Bass 50 - + • Reset E SOUND & LANGUAGE CONTROL 1 MENU • Level TruSurround XTsound : On mode configuration...
SOUND & LANGUAGE CONTROL AUDIO DESCRIPTION(IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included. When Main Audio is AAC or Dolby Digital Plus Audio, Audio Description is not supported.
I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. 1Q. MENU Select A u d i o. 2 Select the sound output. OK Broadcast On Screen Display Mono MONO STEREO Dual DUAL I, DUAL II, DUAL I+II A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
SOUND & LANGUAGE CONTROL NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. SOUND & LANGUAGE CONTROL 94 1 When NICAM mono is received, you can select N I C A M M O N O or F M M O N O. 2 When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 OK Select your desired language. OK Select your country. 2 * If you want to change Language/ Country selection 1 MENU Select O P T I O N. 2 OK Select M e n u L a n g u a g e or C o u n t r y. OK Select your desired language or country. 3 OK Save. • Press the M E N U button to return to normal TV viewing.
SOUND & LANGUAGE CONTROL LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
TIME SETTING AUTO ON/OFF TIMER SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work. TIME Move TIME OK Clock Move Clock 25 / Feb.
SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. 1Q. MENU 2 OK Select S l e e p T i m e r. Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 M i n. • When you switch the TV off, the preset sleep timer is cancelled. • You can also adjust S l e e p T i m e r in the T I M E menu.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. Revitalize B l o c k P r o g r a m m e, P a r e n t a l G u i d a n c e and I n p u t B l o c k function. LOCK Move Lock Lock System System OK : Off : Off Set Password Set Password Block Programme Move OK Off Off Off: :Off On Block Programme Parental Guidance : Off Input Block 1 MENU LOCK Lock System Parental Guidance : Off Input Block Select L O C K.
BLOCK PROGRAMME Blocks any programmes that you do not want to watch or that you do not want your children to watch. O n”. It is available to use this function in L o c k S y s t e m ”O Enter a password to watch a blocked programme. 1 LOCK Lock System Move YLE TV1 DTV OK : Off 2 YLE TV2 4 TV4 Stockholm 5 YLE FST 6 CNN Set Password TV 8 YLE24 9 YLE Teema Block Block Programme Programme Parental Guidance Radio 1 YLE TV1 24 TV4 Fakta 14 TV4 Film 50 TV400 : Off Input Block Pr.
PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off.
INPUT BLOCK Enables you to block an input. LOCK Lock System Move OK : Off Set Password Lock System Set Password Block Programme Parental Guidance LOCK Block Programme : Off Input Block Parental Guidance InputBlock Block Input Move OK :AV1 Off F Off AV2 Off AV3 : Off Component Off RGB Off HDMI1 Off G Off HDMI2 Off HDMI3 Off (Except for 42/50PQ10**, 42/50PQ11**) Close 1 MENU Select L O C K. 2 Select I n p u t B l o c k. OK Select the source. OK Select O f f or O n.
PARENTAL CONTROL / RATINGS KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. OPTION Move OPTION OK E Subtitle Language Hard of Hearing( : English Audio Language : English Subtitle Language ) : Off Hard of Hearing( : MHEG Data Service : MHEG : UK Country : UK Input Label SIMPLINK : On SIMPLINK Key Lock Off :: Off Key Key Lock Lock Select O P T I O N.
TELETEXT POWER This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. AV V MODE ENERGY SAVING SAVING LIST Q.VIEW The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the T . O P T button and then use button to select i menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK/ Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
APPENDIX TROUBLESHOOTING The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Install new batteries. A The remote control does not work Power is suddenly turned off Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted.
The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers + or - button. Press the Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust B a l a n c e in menu option. Unusual sound from inside the TV A A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement 50PQ20** 42PQ30** 50PQ30** 42PQ2000-ZA 42PQ2010-ZB 50PQ2000-ZA 50PQ2010-ZB 42PQ3000-ZA 50PQ3000-ZA 1031.2 x 720.9 x 308.0 mm 40.6 x 28.4 x 12.1 inches 1216.7 x 818.1 x 353.0 mm 1031.2 x 720.9 x 308.0 mm 47.9 x 32.2 x 13.9 inches 40.6 x 28.4 x 12.1 inches 1216.7 x 818.1 x 353.0 mm 47.9 x 32.2 x 13.9 inches 1031.2 x 656.7 x 80.8mm 40.6 x 25.9 x 3.
APPENDIX MODELS Dimensions with stand (Width x Height x Depth) without stand with stand Weight without stand Power requirement MODELS with stand 50PQ10** 42PQ1000-ZD/ZA 50PQ1000-ZD/ZA 42PQ11** 50PQ11** 42PQ1100-ZE 50PQ1100-ZE 1031.2 x 720.9 x 308.0 mm 40.6 x 28.4 x 12.1 inches 1216.7 x 818.1 x 353.0 mm 1031.2 x 720.9 x 308.0 mm 47.9 x 32.2 x 13.9 inches 40.6 x 28.4 x 12.1 inches 1216.7 x 818.1 x 353.0 mm 47.9 x 32.2 x 13.9 inches 1031.2 x 656.7 x 80.8mm 40.6 x 25.9 x 3.2 inches 1216.
IR CODES Code (Hexa) 08 0B f0 45 43 AB 07 06 40 41 44 28 AA 30 02 03 00 01 1E 09 10 ~19 53 1A 72 71 63 61 20 21 39 7E 95 65 79 Function POWER INPUT TV/RAD Q.MENU MENU GUIDE Left ( ) Right ( ) Up ( ) Down ( ) OK( ) RETURN/EXIT INFO i AV MODE + P P FAV(MARK) MUTE Number Key 0~9 LIST Q.VIEW RED Key GREEN Key YELLOW Key BLUE Key TEXT T.OPT(T.
APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. Type of Connector; D-Sub 9-Pin Male No.
Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p .119 OPTION Move OK OPTION E : UK Input Label : UK Input Label : On SIMPLINK : On Key Lock : Off Key Lock : Off Siimple Manual 1 MENU Country SIMPLINK Siimple Manual Set ID ID Set :: 11 Set ID ID Set :: 11 ISM Method : Normal ISM Method : Normal : Off Demo Mode Demo Mode OK E Country Move E E F : Off 1 G Close Select O P T I O N. 2 OK 3 OK Select S e t I D.
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Command Reference List COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07. Brightness 08. Colour 09. Tint 10. Sharpness 11.
01. Power (Command: k a) 0 4 . V o l u m e M u t e (C o m m a n d : k e ) G To control Power On/Off of the set. G To control volume mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust mute using the MUTE button on remote control. Transmission Data 00 : Power Off Ack [k][e][ ][Set ID][ ][Data][Cr] 01 : Power On G To show Power On/Off.
APPENDIX 0 9 . T i n t (C o m m a n d : k j ) 14. Bass (Command: k s) G To adjust the screen tint. G To adjust bass. You can also adjust tint in the PICTURE menu. You can also adjust bass in the AUDIO menu. Transmission Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 119. Ack [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 119.
18. ISM Method (Command: j p) 21.Tune Command (Command: m a) G To control the ISM method. You can also adjust ISM G Select channel to following physical number. Method in OPTION menu. Transmission Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] [j][p][ ][Set ID][ ][Data][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 88 (188H), DTV No.
APPENDIX 23. Key(Command: m c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 113. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 2 4 . I n p u t s e l e c t (C o m m a n d : x b ) (Main Picture Input) G To select input source for main picture.