Quick start guide

ENGLISH
SMART TV Quick Setup Guide
< Additional points to check when using a wireless connection>
1
Check the password for the wireless connection in the
router settings window.
Network Status
TV Gateway DNS Internet
2
Change the router SSID (network name) or the wireless
channel.
Check the router or
consult your Internet service provider.
Network Status
TV Gateway DNS Internet
When an ✔ appears TV, Gateway and DNS.
1
Unplug the power cord of the AP, cable modem and try to con-
nect after 5 seconds.
2
Initialize(Reset) the AP or cable modem.
3
Check that the MAC address of the TV/router is registered
with your Internet service provider. (The MAC address dis-
played on the right pane of the network status window should
be registered with your Internet service provider.)
When an ✔ appears TV and Gateway.
1
Unplug the power cord of the AP, cable modem and try to
connect after 5 seconds.
2
Initialize(Reset) the AP or cable modem.
4
Check the router manufacturer’s website to make sure your
router has the latest firmware version installed.
3
Contact internet companies or AP companies.