User manual

26
ENG
ENGLISH
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote
Control
It is necessary to ‘pair’ (register) the magic remote
controltoyourTVbeforeitwillwork.
How to register the Magic Remote Control
1 To register automatically,
turn the TV on and press the
Wheel(OK)button.When
registration is completed, the
completion message appears
onthescreen.
2 If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
completeregistration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the BACK
and SMART buttons
together for 5 seconds to
reset, then register it by
following“Howtoregisterthe
MagicRemoteControl”above.
2 To re-register the Magic
Remote Control, press and
hold the BACK button for 5
secondstowardtheTV.When
registration is completed, the
completion message appears
onthescreen.
How to use magic remote
control
1 If the pointer disappears, move
the Magic Remote Control
slightlytoleftorright.Then,it
will automatically appear on
thescreen.
»
If the pointer has not been
used for a certain period of
time,itwilldisappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the Magic Remote Control at
your TV then move it left, right,
upordown.
»
If the pointer does not work
properly, leave the Magic
Remote Control for 10
secondsthenuseitagain.
1
If you press Wheel(OK) on the Magic
Remote Control, the following screen
appears.
Shows information about the current
programmeandscreen.
2
YoucanselectMoreMenu.
More
Precautions to Take when
Using the Magic Remote
Control
y
Use the Magic Remote Control within the
maximumcommunicationdistance(10m).
Using the Magic Remote Control beyond this
distance, or with an object obstructing it, may
causeacommunicationfailure.
y
A communication failure may occur due to
nearbydevices.Electricaldevicessuchasa
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth(2.4GHz)astheMagicRemote
Control.
y
The Magic Remote Control may be damaged
or may malfunction if it is dropped or receives a
heavyimpact.
y
Take care not to bump into nearby furniture or
other people when using the Magic Remote
Control.
y
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electricwaveinterference.
y
It is recommended that an Access Point (AP)
belocatedmorethan1mawayfromtheTV.If
the AP is installed closer than 1 m, the Magic
Remote Control may not perform as expected
duetofrequencyinterference.