Please read this manual carefully before operating your set and retain it for future reference. EA98** EA88** www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 LICENSES 36 MAGIC REMOTE CONTROL FUNCTIONS 3 OPEN SOURCE SOFTWARE NOTICE 4 SAFETY INSTRUCTIONS 37 37 37 10 - Viewing 3D Imaging (Only 3D models) Registering Magic Remote Control How to use magic remote control Precautions to Take when Using the Magic Remote Control 12 INSTALLATION PROCEDURE 38 USING THE USER GUIDE 12 ASSEMBLING AND PREPARING 39 MAINTENANCE 12 16 17 18 19 20 20 21 22 23 24 25 25 26 Unpacking Separate purchase Parts a
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS Do not drop the product or let it fall over when connecting external devices. yy Otherwise, this may result in injury or damage to the product. Keep the anti-moisture packing material or vinyl packing out of the reach of yy children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
SAFETY INSTRUCTIONS ENGLISH ENG Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local yy service centre.
SAFETY INSTRUCTIONS Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to yy keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. yy Also avoid places where there is vibration or where the product cannot be fully supported.
SAFETY INSTRUCTIONS ENGLISH ENG Do not turn the product On/Off by plugging-in or unplugging the power plug to the yy wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from yy overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS Contact the service centre once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS ENGLISH ENG Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS 11 Viewing Environment � Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENGLISH ENG EA98** SMART BACK /Q.MENU Owner’s manual Remote control, Batteries (AAA) (Depending on model) (See p. 35) Magic remote control, Batteries (AA) (See p. 36) Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country. Component video cable (See p. 30) Composite video cable (See p. 30, 31) Scart gender cable (See p. 34) AV cover (See p. 21) Cable Band (See p. 24) Cable Management (See p.
ASSEMBLING AND PREPARING ENGLISH ENG EA88** SMART BACK /Q.MENU Owner’s manual Remote control, Batteries (AAA) (Depending on model) (See p. 35) Magic remote control, Batteries (AA) (See p. 36) Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country. Component video cable (See p. 30) Composite video cable (See p. 30, 31) Scart gender cable (See p. 34) Stand Cover (Only EA88**-ZA) (See p. 20) Stand Base (Only EA88**-ZA) (See p.
ASSEMBLING AND PREPARING 15 ENGLISH ENG Velcro Tape 2EA (Only EA88**-ZA) (See p. 21) Ferrite core (Only EA88**-ZC/ZF) (See p. 15) NOTE (Only EA88**-ZC/ZF) The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade yy of product functions. How to use the ferrite core 1 2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
ASSEMBLING AND PREPARING ENGLISH ENG Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. BACK SMART /Q.
ASSEMBLING AND PREPARING 17 Only EA98** ENGLISH ENG Parts and buttons Screen Remote control sensor LG Logo Light Smart Touch Button Clear Speakers Screen Only EA88** Remote control sensor LG Logo Light Smart Touch Button Speakers (Depending on model) Button /I Description Turns the power on or off. NOTE yy You can set the LG Logo Light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING 1 To Turn the TV On. - Gently press the smart touch button just below the LG logo light at the bottom of the TV. 2 To Turn the TV Off. - If the touch menu is not displayed on the screen, press the smart touch button for about two seconds. Smart Touch Button (Power Button) NOTE yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. yy Only press the smart touch button gently with your finger.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Image shown may differ from your TV. Attaching the stand (Only EA88**-ZA) 1 4 Front Stand Base 2 Stand Cover 4EA M4 x L10 CAUTION 3 yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING ENGLISH ENG Assembling the AV Cover (Only EA98**) 1 Assemble the AV Cover as shown. AV Cover (Only EA88**-ZA) 1 Attach the Velcro Tapes as shown. Velcro Tape 2 21 Assemble the AV Cover as shown.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. Securing the TV to a wall (Only EA88**-ZA) To use the desk-type stand safely, make sure to securely attach it to a wall. 10 cm 10 cm m 10 c 10 cm 1 5 cm 10 cm 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
ASSEMBLING AND PREPARING (Only EA88**-ZA) Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm 10 cm 10 cm Make sure to use screws and wall mount bracket that meet the VESA standard.
ASSEMBLING AND PREPARING ENGLISH ENG Tidying cables (Only EA88**-ZA) (Only EA98**) 1 Fix the Cable Management with Cable Management Screw and arrange the cables. ** Stand Type ** 1 Use Cable Holder to neatly secure and position cables together. Power Cable Hoder Cable Holder ** Wall Mount Type ** 1 EA M4 x L20 Cable Management 2 Wrap the arranged cables with the Cable Band, then pull the zip down.
ASSEMBLING AND PREPARING Overview ENGLISH ENG Video call camera 25 Product Handling yy Do not let the camera get wet. Liquid getting into the camera could cause a short circuit. yy Wipe the camera gently with a dry cloth to remove any dust or dirt. If the product is very dirty, spray a mild detergent on the cloth first. yy Do not clean with thinner, alcohol, benzene or any other volatile agent. These may damage the product’s surface or affect its operation.
ASSEMBLING AND PREPARING ENGLISH ENG Attaching the Video Call Camera 1 Unfold the stand and put it on the top center of the TV set. Video call camera NOTE yy For the best quality video and audio outputs, install the camera on the top-center of your TV. yy Set up with the television switched off. yy When using external speakers, allow sufficient space between the microphones and the speakers. yy The TV must be connected to a network for Skype to work.
MAKING CONNECTIONS Antenna Connection This section on MAKING CONNECTIONS mainly uses diagrams for the 55EA98** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS ENGLISH ENG Satellite dish Connection HDMI Connection (Only satellite models) DVD / Blu-Ray / HD Cable Box / HD STB / PC Satellite Dish IN 13 / 18 V 700mA Max LNB IN Satellite HDMI Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (*Not Provided) Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect.
MAKING CONNECTIONS DVI to HDMI Connection IN AV2 ( Audio in) (*Not Provided) AUDIO OUT DVI OUT DVD / Blu-Ray / HD Cable Box / PC Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use. NOTE yy Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
MAKING CONNECTIONS ENGLISH ENG MHL Connection Component Connection IN AV2 VIDEO Mobile phone COMPONENT AUDIO PR PB Y AV2 GREEN (Use the component video cable provided.) YELLOW (Use the composite video cable provided.) RED BLUE GREEN RED RED BLUE GREEN RED RED BLUE (*Not Provided) L GREEN WHITE NOTE yy Connect the mobile phone to the HDMI/DVI IN 4 (MHL) port to view the phone screen on the TV. yy The MHL passive cable is needed to connect the TV and a mobile phone.
MAKING CONNECTIONS IN AV2 VIDEO Headphone Connection COMPONENT AUDIO PR PB OUT Y (*Not Provided) Ext.Speaker / H/P AV2 Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. YELLOW (Use the composite video cable provided.
MAKING CONNECTIONS ENGLISH ENG Audio Connection Canvas speaker connection (Only EA88**-ZC/ZF) TV OUT OPTICAL DIGITAL AUDIO Canvas Speaker (Use the Canvas Speaker provided.) (*Not Provided) Optical cable (Use the Optical cable provided.) OPTICAL AUDIO IN Digital Audio System / Canvas Speaker (Only EA88**-ZC/ZF) You may use an external audio system instead of the built-in speaker. Digital optical audio connection Transmits a digital audio signal from the TV to an external device.
MAKING CONNECTIONS CI module Connection Hub (*Not Provided) USB (*Not Provided) Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE yy Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB IN port on the TV directly. yy Connect the external power source if your USB is needed. PCMCIA CARD SLOT 1 (USB 3.
MAKING CONNECTIONS ENGLISH ENG Euro Scart Connection IN/OUT (RGB) AV 1 (Use the Scart gender cable provided.) (*Not Provided) AUDIO / VIDEO Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. Current input mode Output Type Digital TV AV1 (TV Out1) Digital TV Analogue TV, AV Component Analogue TV HDMI 1 TV Out : Outputs Analogue TV or Digital TV signals.
REMOTE CONTROL 35 (Depending on model) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
MAGIC REMOTE CONTROL FUNCTIONS ENGLISH ENG MAGIC REMOTE CONTROL FUNCTIONS This item is not included for all models. When the message “Magic Remote Control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
MAGIC REMOTE CONTROL FUNCTIONS 37 ENGLISH ENG Registering Magic Remote Control It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. How to register the Magic Remote Control 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.
USING THE USER GUIDE ENGLISH ENG USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. Press SMART button to access the Smart Home menu. Select User Guide and press Wheel(OK). 1 2 OPTION > To set language 1 SMART Settings OPTION Language(Language) Selects Menu Language and Audio Language displayed on the screen. Menu Language Selects a language for the display text.
MAINTENANCE 39 Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Problem Solution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. to , to yy Check if the batteries are still working and properly installed ( No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet.
EXTERNAL CONTROL DEVICE SETUP / SPECIFICATIONS To obtain the external control device setup information, please visit www.lg.com. SPECIFICATIONS Wireless LAN module(TWFM-B006D) specification Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 11 dBm 802.11b: 14 dBm Output Power 802.11g: 10.5 dBm (Max.) 802.11n - 2.4GHz: 11 dBm 802.11n - 5GHz: 12.5 dBm Bluetooth module (BM-LDS401) specification Standard Bluetooth Version 3.
SPECIFICATIONS ENGLISH ENG Product specifications may be changed without prior notice due to upgrade of product functions. 55EA98** 55EA88** 55EA9809-ZA 55EA980V-ZA 55EA980W-ZA 55EA8809-ZA 55EA880V-ZA 55EA880W-ZA 1227 x 798.5 x 192 1230 x 790 x 233 - 1230 x 715 x 25.4 17.2 18.0 - 13.
SPECIFICATIONS Dimensions (W x H x D) 112 mm x 56 mm x 38 mm Weight 107.8 g Lens Video Audio Focus More than 100 cm Field of Vision 61.25° in diagonal Effective pixels 1920 x 1080 Output format H.
SPECIFICATIONS ENGLISH ENG HDMI/DVI-DTV supported mode Component port connecting information Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.469 / 31.5 59.94/ 60 720 x 480 31.469 / 31.5 59.94 / 60 720 x 576 31.25 15.625 50 50 1280 x 720 37.500 44.96 / 45 50 59.94 / 60 33.72 / 33.75 28.125 26.97 / 27 59.94 / 60 50.00 23.97 / 24 25 29.976 / 30.00 50 59.94 / 60 1920 x 1080 33.716 / 33.75 56.250 67.43 / 67.
SPECIFICATIONS yy Video, which is input as below media contents is switched into the 3D screen automatically. yy The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Input Signal 640x480 Horizontal Frequency (kHz) 576p 59.94 / 60 HDMI 1080i 1080p 31.469 / 31.5 62.938 / 63 Frame Packing, Line Alternative 31.
SPECIFICATIONS ENGLISH ENG 3D supported mode manually Signal Resolution Horizontal Frequency (kHz) Verticla Frequency (Hz) HD / SD - - ATV(CVBS) SD - - Component HD / SD - - 1024X768 48.36 1360X768 47.71 Input DTV HDMI-PC 60 Others - - 480P 31.5 60 576P 31.25 50 37.5 50 45 60 28.12 50 33.75 60 27 24 28.12 25 33.75 30 56.25 50 67.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Country Service Service 0 810 144 131 0900 543 5454 015 200 255 800 187 40 0032 15 200 255 801 54 54 54 07001 54 54 808 78 54 54 810 555 810 031 228 3542 8088 5758 0850 111 154 0800 0 54 54 902 500 234 Record the model number and serial number of the TV.