OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. EC93** EC97** EC98** *MFL68488304* www.lg.
TABLE OF CONTENTS ENG ENGLISH TABLE OF CONTENTS 3 LICENSES 37 REMOTE CONTROL 3 OPEN SOURCE SOFTWARE NOTICE 39 MAGIC REMOTE FUNCTIONS 40 40 41 Registering Magic Remote How to use magic remote Precautions to Take when Using the Magic Remote 41 USING THE USER GUIDE 3 EXTERNAL CONTROL DEVICE SETUP 4 SAFETY INSTRUCTIONS 10 - Viewing 3D Imaging 42 MAINTENANCE 12 INSTALLATION PROCEDURE 12 ASSEMBLING AND PREPARING 42 42 42 Cleaning your TV - Screen, frame, cabinet and stand - Power cor
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SAFETY INSTRUCTIONS ENG ENGLISH SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS yy Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. yy Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
SAFETY INSTRUCTIONS ENG ENGLISH yy Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. yy If any of the following occur, unplug the product immediately and contact your local service centre.
SAFETY INSTRUCTIONS yy Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. yy Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
SAFETY INSTRUCTIONS ENG ENGLISH yy Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. yy Please follow the installation instructions below to prevent the product from overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS yy Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. yy Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS ENG ENGLISH Viewing 3D Imaging WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS 11 Viewing Environment yy Viewing Distance -- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENG ENGLISH NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENGLISH ENG Remote control, Batteries (AAA) (Depending on model) (See p. 37, 38) Magic remote, Batteries (AA) (See p. 39) Owner’s manual Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Cable Holder (See p. 24, 25) Component gender cable (See p. 32) Composite gender cable (See p. 32, 33) HDMI Cable (Only EC97**, EC98**) (See p. 29) Scart Gender Cable (See p. 36) AV Cover (Only EC98**) (See p. 20) AV Cover (Only EC93**) (See p.
ASSEMBLING AND PREPARING ENG ENGLISH Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING 15 A type: EC93** Screen Speakers Remote Control Sensor and Intelligent Sensor1 LG Logo Light Joystick button2 B type: EC97** Built-In Camera Screen Speakers Remote Control Sensor and Intelligent Sensor1 LG Logo Light Joystickbutton button3 3 Joystick ENGLISH ENG Parts and buttons
ASSEMBLING AND PREPARING ENG ENGLISH C type: EC98** Built-In Camera Screen Speakers LG Logo Light Remote Control Sensor and Intelligent Sensor1 1 2 3 Joystick button2 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. Joystick Button - This button is located behind the TV screen. Joystick Button - This button is located below the TV screen. NOTE You can set the LG Logo Light to on or off by selecting GENERAL in the main menus.
ASSEMBLING AND PREPARING 17 You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.
ASSEMBLING AND PREPARING ENG ENGLISH Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should be yy at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING 19 (Only EC97**) Image shown may differ from your TV. 1 ENGLISH ENG Setting up the TV Back cover Detaching the stand (Only EC93**, EC98**) 1 Screen 8 EA M4 x L20 (Only EC93**) 4 EA M4 x L20 (Only EC98**) 8EA M4 x L20 Back cover 2 Screen 2 CAUTION yy When detaching the stand to the TV set, place the screen(or back) facing down on a cushioned table or flat surface to protect the screen(or back) from scratches.
ASSEMBLING AND PREPARING ENG ENGLISH Assembling the AV cover Mounting on a table Assemble the AV Cover as shown. 1 (Only EC93**) Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm AV cover (Only EC97**) 5 cm 10 cm AV cover 2 (Only EC98**) Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING 21 (This feature is not available for all models.) To use the desk-type stand safely, make sure to securely attach it to a wall. Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer.
ASSEMBLING AND PREPARING ENG ENGLISH Model 77EC98** VESA (A x B) A B Wall Type Set-up Guide (Only EC98** - Seperate purchase) 400 x 400 Guide spacer assembly 1 Standard screw Number of screws Remove the VESA screws (4EA). M6 4 LSW420BX Wall mount bracket CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury.
ASSEMBLING AND PREPARING 23 Type 1. Hanging the TV on the wall before removing a stand. Type 2. Hanging the TV on the wall after removing a stand. 1 1 Wall mount bracket 2 CAUTION yy When laying the TV on its back on a padded table or surface, be careful to prevent the TV from being damaged.
ASSEMBLING AND PREPARING ENG ENGLISH Tidying cables 4 Image shown may differ from your TV. ** Stand Type ** (Only EC93**) Gather and bind the cables with the cable holder. Wall mount bracket 5 Cable Holder (Only EC97**) 1 Put the cable management in the hole of TV back cover.
ASSEMBLING AND PREPARING 25 Fix the cable management with cable management Screw. (Only EC98**) Gather and bind the cables with the cable holder. Cable Holder M4 x L10 2 EA 3 Gather and bind the cables with the cable holder. Arrange the cable in the cable mangement. ** Wall Mount Type ** (Only EC93**) Cable Holder Cable Management Cable Holder CAUTION yy Do not move the TV by holding the cable holder, as the cable holder may break, and injuries and damage to the TV may occur.
ASSEMBLING AND PREPARING ENG ENGLISH Using Built-in Camera (Only EC97**, EC98**) Preparing Built-in Camera 1 Pull up the built-in camera at the back of the TV. Angle Adjustment Lever You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera.
ASSEMBLING AND PREPARING 27 Push down the built-in camera when you are not using it. Name of Parts of Built-in camera Camera Lens Protective Film Microphone Checking the Camera’s Shooting Range 1 2 Press the (Home) button on the remote control to display the HOME menu. Select CAMERA and then press the Wheel(OK) button. NOTE The optimal distance from the camera to use yy the motion recgnition function is between 1.5 m and 4.5 m.
MAKING CONNECTIONS ENG ENGLISH MAKING CONNECTIONS Antenna Connection This section on MAKING CONNECTIONS mainly uses diagrams for the EC93** models. Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS (Only EC97**) ENGLISH ENG Satellite dish Connection 29 (Only satellite models) Satellite Dish (*Not Provided) 13/18V 700mA Max LNB IN Satellite IN ANTENNA/ CABLE Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
MAKING CONNECTIONS ENG ENGLISH Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. ARC (Audio Return Channel) An external audio device that supports yy SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) or HDMI(4K @ 60 Hz)/DVI IN 2 (ARC) port.
E MAKING CONNECTIONS (4K@60Hz) AV2 2 CO ( Audio in)) (4K@60Hz) (Only EC93**) (*Not Provided) AUDIO OUT MHL passive cable (*Not Provided) DVI OUT DVD / Blu-Ray / PC / HD Cable Box / HD STB Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. NOTE Depending on the graphics card, DOS mode yy may not work if a HDMI to DVI Cable is in use.
MAKING CONNECTIONS ENG ENGLISH Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. Component Connection NOTE yyConnect the mobile phone to the HDMI/DVI IN 4 (MHL) or HDMI(4K @ 60 Hz)/DVI IN 4 (MHL) port to view the phone screen on the TV. The MHL passive cable is needed to yy connect the TV and a mobile phone. This only works for the MHL-enabled phone. yy Some applications can be operated by the yy remote control.
MAKING CONNECTIONS IN AV2 VIDEO Headphone Connection COMPONENT AUDIO PR PB Y OUT Ext.Speaker / H/P AV2 IN ( Audio in) YELLOW (Use the composite gender cable provided.) WHITE RED WHITE RED YELLOW YELLOW (*Not Provided) RED WHITE YELLOW VIDEO L (MONO) AUDIO R DVD / Blu-Ray / HD Cable Box / VCR Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a composite gender cable as shown.
MAKING CONNECTIONS USB Connection 2 3 (Only EC93**) USB OUT 1 OPTICAL DIGITAL AUDIO (*Not Provided) OPTICAL AUDIO IN Digital Audio System You may use an external audio system instead of the built-in speaker. HDD USB HUB (*Not Provided) (*Not Provided) (*Not Provided) (Only EC97**, EC98**) 3 Digital optical audio connection USB 2 Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS CI module Connection PCMCIA CARD SLOT NOTE (*Not Provided) PCMCIA CARD SLOT Some USB Hubs may not work. If a USB yy device connected using a USB Hub is not detected, connect it to the USB IN port on the TV directly. Connect the external power source if your yy USB is needed. Connecting via USB 3.0: yy Some USB device may not work if it dose not meet USB 3.0 standard. In case, connect it to USB IN 2 or USB IN 3 port.
MAKING CONNECTIONS ENG ENGLISH Euro Scart Connection NOTE Any Euro scart cable used must be signal yy shielded. When watching digital TV in 3D imaging yy mode, only 2D out signals cannot be output through the SCART cable. If you use the Time Machine function on yy digital TV, TV out signals cannot be output through the SCART cable. IN/OUT (RGB) AV 1 (Use the Scart gender cable provided.) (*Not Provided) AUDIO / VIDEO Transmits the video and audio signals from an external device to the TV set.
REMOTE CONTROL 37 (Depending on model) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
REMOTE CONTROL ENG ENGLISH (POWER) Turns the TV on or off. INPUT Changes the input source. SETTINGS Accesses the main menus. Q. MENU Accesses the quick menus. INFO Views the information of the current programme and screen. (User Guide) Sees user-guide. • Number buttons Enters numbers. (Space) Opens an empty space on the screen keyboard. GUIDE Shows programme guide. Q.VIEW Returns to the previously viewed programme. FAV P P A G E Adjusts the volume level.
MAGIC REMOTE FUNCTIONS 39 When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE FUNCTIONS ENG ENGLISH Voice recognition Network connection is required to use the voice recognition function. 1. Press the Voice recognition button. 2. Speak when the voice display window appears on the left of the TV screen. • The voice recognition may fail when you speak too fast or too slow. • Use the Magic remote control no further than 10 cm from your face.
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE 41 User Guide allows you to more easily access the detailed TV information. 1 Press the (Home) button to access the Home menu. 2 Select User Guide and press the button. Wheel(OK) Use the Magic Remote within the maximum yy communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. A communication failure may occur due to yy nearby devices.
MAINTENANCE ENG ENGLISH MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
TROUBLESHOOTING 43 Problem ENGLISH ENG TROUBLESHOOTING Solution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet.
SPECIFICATIONS ENG ENGLISH SPECIFICATIONS (Only EC93**) Wireless module(LGSBW41)Specifications Wireless LAN Standard IEEE 802.11a/b/g/n Frequency Range Bluetooth Standard Bluetooth Version 3.0 2400 to 2483.5MHz 5150 to 5250 MHz Frequency Range 5725 to 5850 MHz(for Non EU) Output Power (Max.) 802.11a: 13 dBm 802.11b: 15 dBm 802.11g: 14 dBm 802.11n - 2.4GHz: 16 dBm 802.11n - 5GHz: 16 dBm 2400 to 2483.5MHz Output Power (Max.
SPECIFICATIONS 45 55EC93** MODEL Dimensions (W x H x D) 55EC930V-ZA With stand (mm) 1225 x 753 x 204 Without stand (mm) 1225 x 715 x 44 With stand (kg) Weight 16.7 Without stand (kg) 14.7 Power consumption 320 W Power requirement AC 100-240 V~ 50 / 60 Hz 65EC97** MODEL Dimensions (W x H x D) Weight 65EC970V-ZA With stand (mm) 1447.4 x 880.1 x 256.6 Without stand (mm) 1447.4 x 826.9 x 56.3 With stand (kg) 25.5 Without stand (kg) 24.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Service Country 0 810 144 131 0900 543 5454 015 200 255 800 187 40 0032 15 200 255 801 54 54 54 07001 54 54 808 78 54 54 810 555 810 031 228 3542 8088 5758 0850 111 154 0800 0 54 54 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
