OWNER’S MANUAL LED TV * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. LA79** LA86** LA96** LA97** P/NO : MFL67728107 (1304-REV00) Printed in Korea www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS 3 LICENSES 3 OPEN SOURCE SOFTWARE NOTICE 4 35 USING THE USER GUIDE 36 MAINTENANCE SAFETY INSTRUCTIONS 36 Cleaning your TV 10 - Viewing 3D Imaging (Only 3D models) 36 36 - Screen, frame, cabinet and stand - Power cord 12 INSTALLATION PROCEDURE 36 TROUBLESHOOTING 12 ASSEMBLING AND PREPARING 12 15 16 17 18 18 20 21 23 23 24 24 25 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS Do not drop the product or let it fall over when connecting external devices. yy Otherwise, this may result in injury or damage to the product. De sic cant Keep the anti-moisture packing material or vinyl packing out of the reach of children. yy Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
SAFETY INSTRUCTIONS ENGLISH ENG Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local yy service centre.
SAFETY INSTRUCTIONS Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power yy lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. yy Also avoid places where there is vibration or where the product cannot be fully supported.
SAFETY INSTRUCTIONS ENGLISH ENG Do not turn the product On/Off by plugging-in or unplugging the power plug to the yy wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from yy overheating. » The distance between the product and the wall should be more than 10 cm. » Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS Contact the service centre once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS ENGLISH ENG Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS 11 Viewing Environment yy Viewing Distance -- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future. yyThe TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENERGY AV MODE INPUT TV SAVING 2 3 4 5 6 7 LIST 8 9 0 FLASHBK ENGLISH ENG 1 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER Tag On BACK EXIT L/R SELECT FREEZE RATIO Owner’s manual Magic remote control, batteries (AA) (See p. 33) Tag on (Depending on model) Scart gender cable (See p.31) Dual play glasses (Depending on model) Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country.
ASSEMBLING AND PREPARING ENGLISH ENG Stand Base (Only LA868*) (See p.
ASSEMBLING AND PREPARING Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons B type : LA860*, LA96**, LA97** A type : LA79** Buttons Screen Screen Video call camera OK OK SETTINGS SETTINGS INPUT INPUT Speakers Speakers Remote control sensor LG Logo light Remote control sensor LG Logo light C type : LA868* Screen Video call camera Buttons OK SETTINGS INPUT Speakers Remote control sensor LG Logo light Button Description Scrolls Hthrough the saved programmes. HAdjusts H S the volume level.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Image shown may differ from your TV.
ASSEMBLING AND PREPARING CAUTION 1 Stand Base yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. Adjusting the angle of the TV to suit view (This feature is not available for all models.) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. (Only LA79**) 10 cm 15 m 10 c 10 cm 10 cm 15 10 cm 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING yy When adjusting the angle adof the product, watch out for your fingers. »»Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. CAUTION yy Make sure that children do not climb on or hang on the TV. NOTE yy Use a platform or cabinet that is strong and large enough to support the TV securely. yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.
ASSEMBLING AND PREPARING ENGLISH ENG Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
ASSEMBLING AND PREPARING (Depending on model) Preparing Built-in Camera 1 Pull up the slide at the back of the TV. You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. NOTE Before using the built-in camera, you must yy recognize the fact that you are legally Slide responsible for the use or misuse of the camera by the relevant national laws including the criminal law.
ASSEMBLING AND PREPARING ENGLISH ENG 2 You can adjust the angle of the camera with the angle adjustment lever on the back of the builtin camera (within 5 degrees vertically). Name of Parts of Built-in Camera Microphone Indicator Angle Adjustment Lever Camera Lens Checking the Camera's Shooting Range 3 Pull down the built-in camera when you are not using it. 1 Press the SMART button on the remote control to display the More menu.
ASSEMBLING AND PREPARING (Only LA868*) 1 (Only LA79**) 1 2 Gather and bind the cables with the cable holder onthe back of the TV. Gather and bind the cables with the Cable Management. Fix the Cable Management firmly to the TV. Cable Holder ⨲㘶ᖂ2 ㏪ⱞ⋾#Ɐᴏ Cable Management Cable Holder (Only LA860*, LA96**, LA97**) 1 2 Gather and bind the cables with the Cable Holder and the Cable Management. Fix the Cable Management firmly to the TV.
MAKING CONNECTIONS MAKING CONNECTIONS Antenna connection This section on MAKING CONNECTIONS mainly uses diagrams for the LA79** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS ARC (Audio Return Channel) An external audio device that supports yy SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) port. When connected with a high-speed yy HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function. 3 / DVI IN 4 (MHL) HDMI connection 27 Headphone connection 1 (ARC) 2 DVD/ Blu-Ray / HD Cable Box / HD STB / PC OUT Ext.
MAKING CONNECTIONS DVI to HDMI connection Component connection IN AV2 VIDEO COMPONENT AUDIO PR PB Y AV2 AV2 YELLOW (Use the composite video cable provided.) (*Not Provided) GREEN (Use the component video cable provided.) (*Not Provided) RED BLUE RED RED BLUE GREEN GREEN RED WHITE DVI OUT WHITE YELLOW AUDIO OUT (*Not Provided) GREEN yy Depending on the graphics card, DOS mode may not work if a DVI to HDMI Cable is in use.
MAKING CONNECTIONS 29 MHL connection 3 / DVI IN 4 (MHL) Composite connection COMPONENT COMPONENT AUDIO PR PB PB Y Y 1 (ARC) VIDEO IN 2 AV2 AV2 MHL passive cable (*Not Provided) YELLOW (Use the composite video cable provided.) WHITE RED WHITE RED YELLOW YELLOW Mobile phone (*Not Provided) RED WHITE YELLOW VIDEO L (MONO) AUDIO R VCR / DVD / Blu-Ray / HD Cable Box Transmits analog video and audio signals from an external device to the TV.
MAKING CONNECTIONS USB connection HUB HDD IN OUT 1 OPTICAL DIGITAL AUDIO (USB 3.0 IN) 2 USB IN PCMCIA CARD SLOT 3 USB IN Audio connection USB HDD (*Not Provided) (*Not Provided) Digital Audio System Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. OPTICAL AUDIO IN You may use an external audio system instead of the built-in speaker.
MAKING CONNECTIONS ▼PCMCIA CARD SLOT▼ CI module connection 31 Euro Scart connection IN/OUT (RGB) AV1 (*Not Provided) (Use the scart gender cable provided.) (*Not Provided) Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.
REMOTE CONTROL ENGLISH ENG REMOTE CONTROL (Depending on model) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE CONTROL FUNCTIONS 33 This item is not included for all models. When the message “Magic Remote Control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE CONTROL FUNCTIONS ENGLISH ENG Registering Magic Remote Control 11-1... It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. BACKto register HOME How the Magic Remote Control P MY APPS 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen.
USING THE USER GUIDE 35 ENGLISH ENG USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. 1 Press the SMART button to access the Smart Home menu. 2 Select User Guide and press Wheel(OK). OPTION > To set language 1 SMART Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Selects a language for the display text.
MAINTENANCE / TROUBLESHOOTING ENGLISH ENG MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
EXTERNAL CONTROL DEVICE SETUP / SPECIFICATIONS 37 To obtain the external control device setup information, please visit www.lg.com SPECIFICATIONS Wireless LAN module(TWFM-B006D) specification Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 11 dBm 802.11b: 14 dBm Output Power 802.11g: 10.5 dBm (Max.) 802.11n - 2.4GHz: 11 dBm 802.11n - 5GHz: 12.5 dBm Bluetooth module (BM-LDS401) specification Standard Bluetooth Version 3.
SPECIFICATIONS ENGLISH ENG Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. MODELS 42LA79** 47LA79** 55LA79** 42LA790V-ZA, 42LA790W-ZA, 42LA7909-ZA 47LA790V-ZA, 47LA790W-ZA, 47LA7909-ZA 55LA790V-ZA, 55LA790W-ZA, 55LA7909-ZA 1077x 690 x 285 1247 x 789 x 326 1077 x 625 x 34.1 1247 x 722 x 34.1 18.5 25.3 13.1 16.8 23.
SPECIFICATIONS 39 42LA868* 47LA868* 55LA868* 42LA868V-ZD 47LA868V-ZD 55LA868V-ZD 1059 x 682 x 251 1229 x 784 x 310 1059 x 625 x 35.1 1229 x 721 x 35.1 19.7 26.7 17.2 23.4 948 x 619 x 251 Dimensions With stand (mm) (W x H x D) Without stand(mm) 948 x 562 x 35.1 15.9 Weight With stand (kg) Without stand (kg) Power requirement Power consumption MODELS 13.
SPECIFICATIONS ENGLISH ENG CI Module Size (W x H x D) Environment condition 100.0 mm x 55.0 mm x 5.
SPECIFICATIONS 41 Component port connecting information Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640X480 31.469 / 31.5 59.94 / 60 720X480 31.469 / 31.5 59.94 / 60 720X576 31.25 15.625 50 50 1280X720 37.500 44.96 / 45 50 59.94 / 60 1920X1080 33.72 / 33.75 28.125 26.97 / 27 33.716 / 33.75 56.250 67.43 / 67.5 59.94 / 60 25 / 50.00 23.97 / 24 29.976 / 30.00 50 59.
SPECIFICATIONS ENGLISH ENG 3D supported mode yy Video, which is input as below media contents is switched into the 3D screen automatically. yy The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Input Signal 640x480 Horizontal Frequency (kHz) 576p 59.94 / 60 HDMI 1080i 1080p 31.469 / 31.5 62.
SPECIFICATIONS 43 Signal Resolution Horizontal Frequency (kHz) Verticla Frequency (Hz) HD / SD - - ATV(CVBS) SD - - Component HD / SD - - 1024X768 48.36 1360X768 47.71 Input DTV HDMI-PC 60 1920X1080 67.5 Others - - 480P 31.5 60 576P 31.25 50 37.5 50 720p 1080i Miracast/Widi 33.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
