User manual

20
ENG
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
y
Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
y
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
y
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
y
Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
y
Use the screws that are listed on the VESA
standard screw specifications.
y
The wall mount kit includes an installation
manual and necessary parts.
y
The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
y
The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
y
For more information, refer to the manual
supplied with the wall mount.
y
When attaching a third-party wall mounting
bracket to the TV, insert the wall mount inner
spacers into the TV wall mount holes to
move your TV in vertical angle. Please make
sure not to use the spacers for LG wall
mounting bracket. (Only 32/37/42LS57**,
32/37/42/47/55LM62**)
Wall Mount Inner Spacer
(Depending on model)
y
In order to protect the TV screen(scratch,
fingerprint), put TV on flat table without
removing wrapping bag.
y
After removing the wrapping bag on the
back of the TV, install TV according to
manual included in wall mounting bracket
product.
y
Remove protection pads after installing TV.
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the


LG recommends that wall mounting be performed

10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model 32/37LS57**
32/37LM62**
32LM64**
32LM66**
42LS57**
42/47/55LM62**
42/47/55/60LM64**
42/47/55LM66**
42/47/55LM67**
42/47/55LM76**
VESA (A x B) 200 x 200 400 x 400
Standard screw M6 M6
Number of screws 4 4
Wall mount bracket LSW200BX
LSW400BX
Model
65LM62**
VESA (A x B)
600 x 400
Standard screw
M8
Number of screws
4
Wall mount bracket
LSW600B
A
B