OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. LM96** LM95** LM86** P/NO : MFL67441716 (1209-REV02) Printed in Korea www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 LICENSES 3 OPEN SOURCE SOFTWARE NOTICE 4 SAFETY INSTRUCTIONS 10 Viewing 3D Imaging 12 INSTALLATION PROCEDURE 12 ASSEMBLING AND PREPARING 12 16 17 18 19 19 24 25 27 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables 29 MAKING CONNECTIONS 29 29 30 31 31 32 32 33 33 34 34 35 35 36 Antenna connection Satellite connection
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS y When mounting a TV it on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV. It may cause fire, electric shock. y Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. y Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
SAFETY INSTRUCTIONS ENGLISH ENG WARNING Never touch this product or antenna during a thunder or lighting storm. yy You may be electrocuted. Never touch the wall outlet when there is leakage of gas, open the windows and yy ventilate. It may cause a fire or a burn by a spark. Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service center for check, calibration or repair.
SAFETY INSTRUCTIONS If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) yy to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. Only use the attachments / accessories specified by the manufacturer. yy When installing the antenna, consult a qualified service man. yy This may create a fire hazard or an electric shock hazard.
SAFETY INSTRUCTIONS ENGLISH ENG CAUTION Take care not to touch the ventilation openings when watching the TV for long yy periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. Periodically examine the cord of your appliance, and if its appearance indicates damage or yy deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
SAFETY INSTRUCTIONS Contact the service center once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS ENGLISH ENG Viewing 3D Imaging WARNING Viewing Environment Viewing Time yy When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Some users may experience a seizure or other abnormal symptoms when they are exposed to a yy flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS Viewing Environment Viewing Distance yy Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age Infants/Children yy Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future. yyThe TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENGLISH ENG P Owner’s manual Magic remote control, batteries (AA) (See p.37) Remote control, batteries (AAA) (See p.39) Composite video cable (See p.32, 33) Component video cable (See p.32) Scart gender cable (See p.33) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Dual play glasses (Depending on model) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Stand rear cover (See p.
ASSEMBLING AND PREPARING ENGLISH ENG Only 84LM96** Stand body (See p.20) Stand base (See p.20) Stand screws 4 EA, M4 x 20 / 6 EA, M5 x 16 (See p.20) Stand rear cover (See p.23) Stand body (See p.23) Stand base (See p.23) Stand screws 4 EA, M4 x 20 / 4 EA, M5 x 35 (See p.23) Cable holder 2 EA (See p.28) Power cord Cable holder (See p.
ASSEMBLING AND PREPARING If there is a Isolator, follow as shown. yy » Use this to install TV in a place where there is a voltage difference between TV set and GND of antenna signal. If there is a voltage difference between TV set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. » You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall.
ASSEMBLING AND PREPARING ENGLISH ENG Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING 17 47/55LM96**, 42/47/55LM86** ENGLISH ENG Parts and buttons 72LM95** Screen Screen OK OK SETTINGS S SETTINGS INPUT INPUT Speakers Remote control and intelligent sensors1 Power Indicator (Only 47/55LM96**) Speakers Buttons LG Logo Light (Only 42/47/55LM86**) Buttons Remote control and intelligent sensors1 Power Indicator 84LM96** Screen OK SETTINGS S INPUT Speakers Remote control and intelligent sensors1 Buttons LG Logo Light Button Description Scrolls throu
ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should be yy at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING 19 ENGLISH ENG Setting up the TV Image shown may differ from your TV. Attaching the stand 47/55LM96** 1 4 EA M4 x 20 Stand body 4 4 EA M4 x 20 Front Stand base Top View 2 Stand rear cover 3 CAUTION yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING ENGLISH ENG 84LM96** 1 4 Stand body 4 EA M4 x 20 Front Stand base 2 6 EA M5 x 16 Front CAUTION yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed. yy Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
ASSEMBLING AND PREPARING 21 1 3 Wrapping bag 4 EA M4 x 20 Stand body Front Stand base CAUTION Top View 2 Stand rear cover yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING ENGLISH ENG 5 6 4 EA M4 x 20 Protection pad NOTE yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. CAUTION yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed. yy Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
ASSEMBLING AND PREPARING 23 1 4 EA M5 x 35 Stand body 4 4 EA M4 x 20 Front Stand base Top View 2 CAUTION CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 Stand rear cover yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table Adjusting the angle of the TV to suit view 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 47/55LM96**, 42/47/55LM86**, 72LM95** Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ 10 cm 10 cm m 10 c 10 cm 84LM96** 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING This feature is not available for all models. Mounting on a wall Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer.
ASSEMBLING AND PREPARING ENGLISH ENG CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yyUse a dedicated power cord. Do not modify or extend the power cord. yy If you install the TV on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount bracket and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty.
ASSEMBLING AND PREPARING Tidying cables 1 Gather the cables with the stand rear cover. 84LM96** 1 Gather and bind the cables with the cable management. Stand rear cover 2 Install the cable holder as shown. Cable holder 3 Gather and bind the cables with the cable holder. Cable management 2 Install the cable holder as shown. Cable holder 3 Gather and bind the cables with the cable holder.
ASSEMBLING AND PREPARING ENGLISH ENG 72LM95** 1 Install the cable holder as shown. Cable holder 2 Gather and bind the cables with the cable holder. 3 Pull the cable management on the stand rear cover and organize cables. Then, put it back. Cable management CAUTION yy Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur.
PCMCI 29 3 PR PB Y IN OUT ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN devices, PC, gaming devices, and other external devices. PCMCIA CARD SLOT NOTE USB IN AUDIO Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.
USB 1 HDD IN 2 USB MAKING CONNECTIONS ENGLISH ENG HDMI connection PCMCIA CARD SLOT 30 3 /DVI IN 4 (MHL) Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use.
DIO COMPONENT PB Y (PC) LAN IN/OUT (RGB) AV1 RGB IN (RGB/DVI) IN/OUT (RGB) 1(ARC) PR IN AUDIO COMPONENT PR PB Y IN AUDIO AV1 (PC) (RGB/DVI) LAN RGB AUDIO IN OUT ANTENNA OPTICAL H/P DIGITAL IN/OUT IN Satellite / CABLE AUDIO 13/18V 13/18V 700mA Max LNB IN (RGB) AV1 (*Not Provided) OUT ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 700mA Max LNB IN OUT MHL passive cable ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN 2 AV 2 IN 3 2 Y 1(ARC) PB
HDDIN I 11 HDD PCMCIACARD CARDSLOT SLOT PCMCIA PCMCIA MAKING CONNECTIONS 4(MHL) Transmits the video signal from your PC to the TV. To transmit an audio signal, connect an audio cable. Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component gender cable as shown.
PCMCIA CARD HDDII 11 HDD AUDIO COMPONENT PR PB AUDIO AUDIO PPRR PPBB 1(ARC) 22 COMPONENT COMPONENT YY LAN (PC) IN RGB (RGB/DVI) AUDIO IN/OUT (RGB) AV1 IN (PC) (PC) RGB RGB IN IN (RGB/DVI) (RGB/DVI) AUDIO AUDIO IN/OUT IN/OUT IN IN13/18V (RGB) (RGB) ANTENNA ANTENNA / CABLE Satellite Satellite / CABLE 13/18VMax 700mA 700mA LNB INMax LNB IN AV1 AV1 OUT OUT OPTICAL OPTICAL H/P H/P DIGITAL DIGITAL AUDIO AUDIO (Use the scart gender cable provided.
US 1 HDD IN 2 US You may use an external audio system instead of the built-in speaker. Any Euro scart cable used must be signal yy shielded. When watching digital TV in 3D imaging yy mode, monitor out signals cannot be output through the SCART cable. If you set the 3D mode to On while a yy scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed.
3 USB Apps View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.
UDIO PCMCIA CA 4(MHL) /DVI IN 3 Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown.
MAGIC REMOTE CONTROL FUNCTIONS 37 When the message "Magic remote control battery is low. Change the battery." is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE CONTROL FUNCTIONS ENGLISH ENG Registering magic remote control It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. How to register the magic remote control 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.
REMOTE CONTROL 39 To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. 2 CAUTION Do not mix old and new batteries, as this may damage the remote control. yy RATIO Uses for viewing 3D video. MUTE Mutes all sounds.
USING THE USER GUIDE ENGLISH ENG USING THE USER GUIDE User Guide To use input device User Guide allows you to more easily access the detailed TV information. 1 Press HOME button to access the Home menu. PICTURE, SOUND Setting OPTION To set language LG SMART Function Disabled Assistance To set Magic Remote Control Information Allows to select the item you want. You can use to move between pages. Allows to browse the description of the function you want from the index.
MAINTENANCE / TROUBLESHOOTING 41 Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Wireless LAN(AN-WF100) specification (Only 72LM95**) Standard IEEE802.11a/b/g/n IEEE 802.11b/g/n in Indonesia IEEE 802.11a/b/g in Russia and Tunisia Host Interface USB 2.0 2.400 to 2.483 GHz Frequency Range 5.150 to 5.250 GHz 5.725 to 5.850 GHz Security 64/128 bit WEP, WPA, WPA2, TKIP, AES, WPS (PIN, PBC) 802.11a: -72 dBm (54 Mbps) Sensitivity 802.
SPECIFICATIONS (Only 47/55/84LM96**, 42/47/55LM86**) Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (For non-EU) Modulation CCK / OFDM / MIMO 802.11a: 11 dBm Output Power (Typical) 802.11b: 15 dBm 802.11g: 13 dBm 802.11n - 2.4GHz: 13 dBm 802.11n - 5GHz: 13 dBm 802.11a/g: 54 Mbps Data rate Antenna Gain (Typical) Occupied bandwidth 802.11b: 11 Mbps 802.11n: 300 Mbps 2400 to 2483.5 MHz: -2.5dBi 5150 to 5250 MHz: -2.2dBi 5725 to 5850 MHz: -2.9dBi 802.
SPECIFICATIONS ENGLISH ENG MODEL Dimensions (W x H x D) 55LM96** 47LM960V-ZB / 47LM960W-ZB 55LM960V-ZB / 55LM960W-ZB With stand (mm) 1053.0 x 684.0 x 302.0 1223.0 x 783.0 x 372.0 Without stand (mm) 1053.0 x 612.0 x 37.9 1223.0 x 708.0 x 38.4 17.0 23.4 With stand (kg) Weight 47LM96** 15.3 20.
SPECIFICATIONS Dimensions (W x H x D) 42LM86** 42LM860V-ZB / 42LM860W-ZB 47LM860V-ZB / 47LM860W-ZB With stand (mm) 953.0 x 636.0 x 302.0 1063.0 x 701.0 x 302.0 Without stand (mm) 953.0 x 567.0 x 33.4 1063.0 x 628.0 x 33.4 15.4 17.5 With stand (kg) Weight 47LM86** 13.7 15.8 Power requirement Without stand (kg) AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz Power consumption 120 W 140 W 55LM86** 55LM860V-ZB / 55LM860W-ZB MODEL Dimensions (W x H x D) Weight With stand (mm) 1232.
SPECIFICATIONS ENGLISH ENG Component port connecting information HDMI/DVI-DTV supported mode Resolution 720x480 720x576 1280x720 1920x1080 3840x2160 (Only 84LM96**) Horizontal Frequency Vertical Frequency (kHz) (Hz) 31.469 59.94 31.5 60 31.25 50 37.5 50 44.96 59.94 45 60 33.72 33.75 Component ports on the TV Video output ports on DVD player Y PB PR Y PB PR Y B-Y R-Y Y Cb Cr Y Pb Pr Signal Component 59.94 480i/576i O 60 480p/576p O 28.
SPECIFICATIONS yy Video, which is input as below media contents is switched into the 3D screen automatically. yy The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Input Signal 640x480 Horizontal Frequency (kHz) 576p 59.94 / 60 HDMI 1080i 1080p Side by Side(Half), Top & Bottom, Side by Side(Full) 62.
SPECIFICATIONS yy For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode. ENGLISH ENG 3D supported mode manually Input Signal 720p 1080i HDMI-DTV 1080p HDMI-PC RGB-PC Horizontal Frequency (kHz) Vertical Frequency (Hz) 37.50 50 45.00 60 28.12 50 33.75 60 27.00 24 28.12 25 33.75 30 56.25 50 67.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Service Country 0900 543 5454 015 200 255 800 187 40 0032 15 200 255 801 54 54 54 07001 54 54 808 78 54 54 810 555 810 031 228 3542 8088 5758 0850 111 154 0800 0 54 54 3220 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
