User’s Guide Specification 담 당 YN PARK 12.03.05 1. Model Description MODEL SUFFIX 2. 47LM960V ZB 47LM960V-ZB BRAND 관 리 자 HJ SHIN 12.03.05 LG Part No. MFL67441716 (1203-REV00) Product Name 47LM960V EK JO KIM 12.03.05 Printing Specification 1. Trim Size (Format) : 182mm x 257 mm 2 P 2. Printing i ti Colors C l Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3. Stock (Paper) Cover : Uncoated paper , 백상지 60 g/㎡ Inside : Uncoated paper , 백상지 60 g/㎡ 4. Printing Method : Off-set 5.
P/NO. MFL67441716 Total pages : 48 pages Pagination sheet Front Cover (EN) P/NO.
OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. P/NO : MFL67441716 (1203-REV00) Printed in Korea www.lg.
2 TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 LICENSES 3 OPEN SOURCE SOFTWARE NOTICE 4 SAFETY INSTRUCTIONS 10 Viewing 3D Imaging 12 INSTALLATION PROCEDURE 12 ASSEMBLING AND PREPARING 12 15 16 17 18 18 22 23 24 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables 25 MAKING CONNECTIONS 25 25 26 27 27 28 28 29 29 30 30 31 31 32 Antenna connection Satellite connection
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
4 SAFETY INSTrUCTIONS ENGLISH ENG SAFETY INSTrUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTrUCTIONS When mounting a TV it on the wall, make sure not to install TV by hanging power yy and signal cables on the back of the TV. It may cause fire, electric shock. Do not plug too many electrical devices into a single multiple electrical outlet. yy Otherwise, this may result in fire due to over-heating. Do not drop the product or let it fall over when connecting external devices. yy Otherwise, this may result in injury or damage to the product.
6 SAFETY INSTRUCTIONS ENGLISH ENG warning Never touch this product or antenna during a thunder or lighting storm. yy You may be electrocuted. Never touch the wall outlet when there is leakage of gas, open the windows and yy ventilate. It may cause a fire or a burn by a spark. Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service center for check, calibration or repair.
SAFETY INSTRUCTIONS If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) yy to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. Only use the attachments / accessories specified by the manufacturer. yy When installing the antenna, consult a qualified service man. yy This may create a fire hazard or an electric shock hazard.
8 SAFETY INSTRUCTIONS ENGLISH ENG CAUTION Take care not to touch the ventilation openings when watching the TV for long yy periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. Periodically examine the cord of your appliance, and if its appearance indicates damage or yy deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
SAFETY INSTRUCTIONS Contact the service center once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10 SAFETY INSTRUCTIONS ENGLISH ENG Viewing 3D Imaging warning Viewing Environment Viewing Time yy When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Some users may experience a seizure or other abnormal symptoms when they are exposed to a yy flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS Viewing Environment Viewing Distance yy Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age Infants/Children yy Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future. yyThe TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENGLISH ENG P Owner’s manual Magic remote control, batteries (AA) (See p.33) Remote control, batteries (AAA) (See p.35) Composite video cable (See p.28, 29) Component video cable (See p.28) Scart gender cable (See p.29) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Dual play glasses (Depending on model) Polishing cloth (Depending on model) Use this to remove dust from the cabinet.
14 ASSEMBLING AND PREPARING ENGLISH ENG Only 47/55/84LM96**, 42/47/55LM86** Stand rear cover (See p.18, 19) Stand body (See p.18, 19) Stand screws 8 EA, M4 x 20 (See p.18, 19) Cable holder 2 EA (See p.24) Stand base (See p.18, 19) Only 72LM95** Stand rear cover (See p.21) Stand body (See p.21) Stand base (See p.21) Stand screws 4 EA, M4 x 20 / 4 EA, M5 x 35 (See p.21) Cable holder 2 EA (See p.
ASSEMBLING AND PREPARING Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
16 ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons 47/55/84LM96**, 42/47/55LM86** Screen OK SETTNGS S INPUT Buttons Speakers Remote control and intelligent sensors1 Only 42/47/55LM86**: LG Logo Light Power Indicator 72LM95** Screen OK SETTNGS INPUT Speakers Buttons Remote control and intelligent sensors1 Power Indicator Button Description Scrolls through the saved programmes. Adjusts the volume level. Selects the highlighted menu option or confirms an input.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should be yy at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
18 ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Image shown may differ from your TV. Attaching the stand 47/55/84LM96** 1 4 EA M4 x 20 Stand body 4 4 EA M4 x 20 Front Stand base Top View 2 Stand rear cover 3 CAUTION yy Make sure that the screws are fastened completely. If they are not fastened securely enough, the TV may tilt forward after being installed. yy Do not fasten the screws with too much force; otherwise they may be worn out and get loosened.
ASSEMBLING AND PREPARING 19 1 3 Wrapping bag 4 EA M4 x 20 Stand body Front Stand base CAUTION Top View 2 Stand rear cover yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
20 ASSEMBLING AND PREPARING ENGLISH ENG 5 6 4 EA M4 x 20 Protection pad NOTE yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. CAUTION yy Make sure that the screws are fastened completely. If they are not fastened securely enough, the TV may tilt forward after being installed. yy Do not fasten the screws with too much force; otherwise they may be worn out and get loosened.
ASSEMBLING AND PREPARING 21 1 4 EA M5 x 35 Stand body 4 4 EA M4 x 20 Front Stand base Top View 2 CAUTION CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 Stand rear cover yy Make sure that the screws are fastened completely. If they are not fastened securely enough, the TV may tilt forward after being installed.
22 ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table Securing the TV to a wall 1 Lift and tilt the TV into its upright position on a table. This feature is not available for all models. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm m 10 c 10 cm 2 Connect the power cord to a wall outlet. CAUTION yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING CAUTION Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm 10 cm 10 cm NOTE Make sure to use screws and wall mount bracket that meet the VESA standard.
24 ASSEMBLING AND PREPARING Tidying cables ENGLISH ENG 47/55/84LM96**, 42/47/55LM86** 72LM95** 1 Gather the cables with the stand rear cover. 1 Install the cable holder as shown. Stand rear cover 2 Install the cable holder as shown. Cable holder 2 Gather and bind the cables with the cable holder. Cable holder 3 Gather and bind the cables with the cable holder. 3 Pull the cable management on the stand rear cover and organize cables. Then, put it back.
4(MHL) 25 3 PR PB Y IN OUT ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN USB IN COMPONENT PCMCIA CARD SLOT Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.
USB 1 HDD IN 2 USB MAKING CONNECTIONS ENGLISH ENG HDMI connection PCMCIA CARD SLOT 26 3 /DVI IN 4 (MHL) Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use.
DIO Y AV 2 (RGB) AV1 Y (PC) RGB IN (RGB/DVI) IN/OUT (RGB) IN AUDIO AV1 (PC) (RGB/DVI) LAN RGB AUDIO IN IN AUDIO COMPONENT PR PB Y OUT ANTENNA OPTICAL H/P DIGITAL IN/OUT IN Satellite / CABLE AUDIO 13/18V 13/18V 700mA Max LNB IN (RGB) AV1 (*Not Provided) OUT ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 700mA Max LNB IN OUT MHL cable ANTENNA OPTICAL H/P DIGITAL Satellite / CABLE AUDIO 13/18V 700mA Max LNB IN 3 IN 2 PB /DVI IN 3 PR 1(ARC) PB 1(ARC) PR 2 COMPONENT A
HDDIN I 11 HDD PCMCIACARD CARDSLOT SLOT PCMCIA PCMCIA MAKING CONNECTIONS 4(MHL) Transmits the video signal from your PC to the TV. To transmit an audio signal, connect an audio cable. Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component gender cable as shown.
PCMCIA CARD HDDII 11 HDD AUDIO COMPONENT PR PB AUDIO AUDIO PPRR PPBB 1(ARC) 22 COMPONENT COMPONENT YY LAN (PC) IN RGB (RGB/DVI) AUDIO IN/OUT (RGB) AV1 IN (PC) (PC) RGB RGB IN IN (RGB/DVI) (RGB/DVI) AUDIO AUDIO IN/OUT IN/OUT IN IN13/18V (RGB) (RGB) ANTENNA ANTENNA / CABLE Satellite Satellite / CABLE 13/18VMax 700mA 700mA LNB INMax LNB IN AV1 AV1 OUT OUT OPTICAL OPTICAL H/P H/P DIGITAL DIGITAL AUDIO AUDIO (Use the scart gender cable provided.
US 1 HDD IN 2 US You may use an external audio system instead of the built-in speaker. Any Euro scart cable used must be signal yy shielded. When watching digital TV in 3D imaging yy mode, monitor out signals cannot be output through the SCART cable. If you set the 3D mode to On while a yy scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed.
3 USB Apps View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.
UDIO PCMCIA CARD 4(MHL) /DVI IN 3 Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown.
MAGIC REMOTE CONTORL FUNCTIONS 33 When the message "Magic remote control battery is low. Change the battery." is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
34 MAGIC REMOTE CONTORL FUNCTIONS ENGLISH ENG Registering magic remote control It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. How to register the magic remote control 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.
REMOTE CONTROL 35 To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. 2 CAUTION Do not mix old and new batteries, as this may damage the remote control. yy RATIO Uses for viewing 3D video. MUTE Mutes all sounds.
36 USING THE USER GUIDE ENGLISH ENG USING THE USER GUIDE User Guide User Guide allows you to more easily access the detailed TV information. 1 Press HOME button to access the Home menu. To use input device To use Energy Saving feature PROGRAMME Setting PICTURE, SOUND Setting OPTION PREMIUM To set TV lock options To set language LG SMART Function 2 Select User Guide and press Wheel(OK).
MAINTENANCE / TROUBLESHOOTING 37 Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
38 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Wireless LAN(AN-WF100) specification (Only 72LM95**) Standard IEEE802.11a/b/g/n IEEE 802.11b/g/n in Indonesia IEEE 802.11a/b/g in Russia and Tunisia Host Interface USB 2.0 2.400 to 2.483 GHz Frequency Range 5.150 to 5.250 GHz 5.725 to 5.850 GHz Security 64/128 bit WEP, WPA, WPA2, TKIP, AES, WPS (PIN, PBC) 802.11a: -72 dBm (54 Mbps) Sensitivity 802.
SPECIFICATIONS (Only 47/55/84LM96**, 42/47/55LM86**) Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO 802.11a: 11 dBm Output Power (Typical) 802.11b: 15 dBm 802.11g: 13 dBm 802.11n - 2.4GHz: 13 dBm 802.11n - 5GHz: 13 dBm 802.11a/g: 54 Mbps Data rate Antenna Gain (Typical) Occupied bandwidth 802.11b: 11 Mbps 802.11n: 300 Mbps 2400 to 2483.5 MHz: -2.5dBi 5150 to 5250 MHz: -2.2dBi 5725 to 5850 MHz: -2.9dBi 802.
40 SPECIFICATIONS ENGLISH ENG 47LM96** 55LM96** 47LM960V-ZB 55LM960V-ZB With stand (mm) 1053.0 x 684.0 x 302.0 1223.0 x 783.0 x 372.0 Without stand (mm) 1053.0 x 612.0 x 37.9 1223.0 x 708.0 x 38.4 17.0 23.4 MODEL Dimensions (W x H x D) With stand (kg) Weight 15.3 20.6 Power requirement Without stand (kg) AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz Power consumption 180 W 210 W 84LM96** MODEL Dimensions (W x H x D) Weight 84LM960V-ZB With stand (mm) 2165.0 x 1445.0 x 400.
SPECIFICATIONS 100.0 mm x 55.0 mm x 5.
42 SPECIFICATIONS ENGLISH ENG HDMI/DVI-DTV supported mode Resolution 720x480 720x576 1280x720 1920x1080 Component port connecting information Horizontal Frequency Vertical Frequency (kHz) (Hz) 31.469 59.94 31.5 60 31.25 50 37.5 50 44.96 59.94 45 60 33.72 33.75 Component ports on the TV Video output ports on DVD player Y PB PR Y PB PR Y B-Y R-Y Y Cb Cr Y Pb Pr Signal Component 59.94 480i/576i O 60 480p/576p O 28.125 50 720p/1080i O 26.97 23.
SPECIFICATIONS 43 yy Video, which is input as below media contents is switched into the 3D screen automatically. yy The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Input Signal 640x480 Horizontal Frequency (kHz) 576p 59.94 / 60 HDMI 1080i 1080p Side by Side(Half), Top & Bottom, Side by Side(Full) 62.
44 SPECIFICATIONS yy For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode. ENGLISH ENG 3D supported mode manually Input Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) 37.50 50 45.00 60 28.12 50 33.75 60 720p 1080i HDMI-DTV 1080p HDMI-PC RGB-PC 27.00 24 28.12 25 33.75 30 56.25 50 67.50 60 1024x768 48.36 1360x768 47.71 67.50 Others - 1024x768 48.36 1360x768 47.71 1920x1080 67.
ENGLISH ENG (UK only)
Please contact LG first. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Service Country 0 810 144 131 Service 0900 543 5454 800 187 40 32 15 200255 801 54 54 54 07001 5454 808 78 54 54 810 555 810 031 228 3542 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.