Installation Guide

Brightness
Adjusts the overall screen brightness. The closer to 100, the brighter the screen will
become.
You may use the Brightness settings specifically to set the dark part of the image.
Sharpness
Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the
image will be.
Color
Tones down or up the colors displayed on the screen. The closer to 100 the deeper
the color.
Tint
Adjusts the color balance between red and green displayed on the screen. The closer
to Red 50, the redder the color will be. The closer to Green 50, the greener the color
will be.
Color Temperature
Adjusts the color tone of the entire image. As you lower the level, you get a warmer
tone, and as you raise it, you get a cooler tone.
The settings you specify only applies to the currently selected input mode.
To apply your current picture settings to all input modes, select Apply to All Inputs.
Depending upon the input signal or the selected picture mode, the available options may
differ.
The configurable items differ depending upon model.
Resetting Picture Mode
Picture Picture Mode Settings Reset
If you want to reset the image settings to the factory defaults after configuring the image
settings, select reset for each image mode.
Setting the Advanced Control Options
Picture Picture Mode Settings Advanced Controls
Dynamic Contrast
61