OWNER’S MANUAL LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 40UB8000 49UB8200 55UB8200 60UB8200 *MFL67987292* 49UB8300 55UB8300 65UB9200 www.lg.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings. ENGLISH TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS ••Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. ••Only use attachments/accessories specified by the manufacturer. ••Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS ••Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.
IMPORTANT SAFETY INSTRUCTIONS Preventing image burn or burn-in on your TV screen ••If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty. ••If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
IMPORTANT SAFETY INSTRUCTIONS For USA and Canada FCC NOTICE ENGLISH This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS 7 Viewing 3D imaging (For 3D models) WARNING Viewing Environment ••Viewing Time - When watching 3D content, take 5 to 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness ••Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D content.
IMPORTANT SAFETY INSTRUCTIONS CAUTION Viewing Environment ••Viewing Distance - Maintain a distance of at least twice the screen’s diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV. Viewing Age ENGLISH ••Infants / Children - Usage/ Viewing 3D content for children under the age of 5 are prohibited.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 9 LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. OPEN SOURCE SOFTWARE NOTICE NOTE ••Image shown may differ from your TV. ••Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. ••The available menus and options may differ from the input source or product model that you are using. ••New features may be added to this TV in the future.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS 7 Viewing 3D imaging (For 3D models) 9 LICENSES 9 OPEN SOURCE SOFTWARE NOTICE 10 TABLE OF CONTENTS 11 INSTALLATION PROCEDURE 11 ASSEMBLING AND PREPARING 11 13 14 15 16 17 17 19 20 21 Unpacking Optional extras Parts and Buttons - Using the Joystick Button Lifting and Moving the TV Setting Up the TV - Attaching the Stand - Mounting on a Table - Mounting on a Wall - Tidying Cables 22 MAKING CONNECTIONS 22 23 3
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 2 3 4 Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking CAUTION ••Do not use any unapproved items to ensure the safety and product’s lifespan.
ASSEMBLING AND PREPARING (For UB8000/UB8200 Series) ENGLISH Owner’s Manual Power Cord (Depending upon model.) Stand Base (See page 17.) (For UB8000/UB8200 Series) (For UB8300 Series) (For UB8300 Series) Stand Screws 4 EA, M4 x L20 (See page 17.) Stand Base (See page 18.) Stand Screws 4 EA, M4 x L21 (See page 18.) (For UB9200 Series) (For UB9200 Series) Stand Base, Stand Body (See page 18.) Stand Screws 8 EA, M4 x L20 (See page 18.
ASSEMBLING AND PREPARING 13 NOTE (For 40UB8000, 49UB8200, 49UB8300) ••How to use the ferrite core (Depending upon model.) ••Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV. to the TV to an External device Ferrite core [Cross Section of Ferrite Core] Optional extras Optional extras can be changed or modified for quality improvement without any notification.
ASSEMBLING AND PREPARING Parts and Buttons (For UB8000/UB8200 Series) (For UB8300 Series) Screen Screen Speakers Remote Control Sensor Intelligent Sensor1 Power Indicator Joystick Button 2 Speakers Remote Control Sensor Intelligent Sensor1 Power Indicator Joystick Button2 ENGLISH (For UB9200 Series) Screen Speakers Intelligent Sensor1 Remote Control Sensor Power Indicator Joystick Button3 1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
ASSEMBLING AND PREPARING 15 Using the Joystick Button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic functions Power On When the TV is turned off, place your finger on the joystick button, press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.
ASSEMBLING AND PREPARING Lifting and Moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION ••Avoid touching the screen at all times, as this may result in damage to the screen. ••Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
ASSEMBLING AND PREPARING 17 Setting Up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION ••When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. ••Make sure that the screws are fastened tightly.
ASSEMBLING AND PREPARING (For UB8300 Series) (For UB9200 Series) A stand base 1 Stand Body (L) 1 Stand Body (R) B stand base Stand Base 1 M4 x L20 4 EA 2 2 ENGLISH 1 ttach the stand to the TV using the upper A mounting hole on the back of the TV. 2 ttach the stand to the TV using the lower A connection on the back of the TV. 1 2 2 M4 x L21 4 EA 1 ttach the stand to the TV using the upper A mounting hole on the back of the TV.
ASSEMBLING AND PREPARING Mounting on a Table 1 19 Securing the TV to a wall (optional) Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. (Depending upon model.) 10 cm (4 inches) 10 cm 10 cm m 10 c 2 Connect the power cord to a wall outlet. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first.
ASSEMBLING AND PREPARING Mounting on a Wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount.
ASSEMBLING AND PREPARING 21 Tidying Cables Gather and bind the cables with the Cable Holder and Cable management . Cable Holder Cable management ENGLISH CAUTION ••Do not move the TV by holding the cable holder and cable management, as the cable holders may break, and injuries and damage to the TV may occur.
MAKING CONNECTIONS MAKING CONNECTIONS ••This section uses illustrations of the UB8300 series. You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS 23 Connecting to an HD receiver, DVD player, or VCR Connect a HD receiver, DVD player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE ••Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. NOTE ••When using the HDMI/DVI cable, Single link is only supported. (4K@60Hz) Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS 25 Connecting to a Mobile Phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE (4K@60Hz) ••Connect the mobile phone to the HDMI(4K@60Hz)/DVI IN 3 (MHL) port to view the phone screen on the TV. ••This only works with an MHL-enabled phone. ••With some MHL supporting mobile phones, you can use the TV remote to control the phone.
MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE ••If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. ••Check to ensure the cables are matched with the corresponding color connection. ENGLISH YELLOW (Use the composite video cable provided.
MAKING CONNECTIONS 27 Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE ••If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. ••Check to ensure the cables are matched with the corresponding color connection. ENGLISH YELLOW (Use the composite video cable provided.
MAKING CONNECTIONS Connecting to a PC NOTE ••It is recommended to use an HDMI connection for the best image quality. ••Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. ••In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
MAKING CONNECTIONS 29 Method B: DVI to HDMI Connection (4K@60Hz) Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE ••Do not look into the optical output port. Looking at the laser beam may damage your vision.
MAKING CONNECTIONS 31 Connecting a USB device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV. NOTE ••Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
REMOTE CONTROL 33 (For UB8300 Series) (POWER) Turns the TV on or off. CAPTION Activates or deactivates the subtitles. AV MODE Selects an AV mode. RATIO Resizes an image. INPUT Changes the input source. Turns the TV on if it is off. Number button Enters numbers. - (Dash) Inserts a dash between numbers such as 2-1 and 2-2. LIST Accesses the saved channel list. FLASHBK Alternates between the two last channels selected (pressing repeatedly). VOL Adjusts the volume level.
USING THE USER GUIDE / EXTERNAL CONTROL DEVICE SETUP USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. 1 2 3 Press SMART Home menu. button to access the Select SETTINGS → SUPPORT. Select User Guide and press the OK button. SUPPORT Sound Test 3D Picture Test Product/Service Info. Patent Information Initialization of App ENGLISH Legal Documents User Guide .
SPECIFICATIONS 35 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 65UB9200 (65UB9200-UC) MODELS 1,452 x 914 x 300 (mm) With stand 57.1 x 35.9 x 11.8 (inch) Dimensions (W x H x D) 1,452 x 858 x 37 (mm) Without stand Weight 57.1 x 33.7 x 1.4 (inch) With stand 34.8 kg (76.7 lbs) Without stand 33.7 kg (74.2 lbs) Current Value / Power consumption 2.3 A / 230 W Power requirement AC 120 V~ 50 / 60 Hz Wireless module (LGSBW41) Specifications Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.
MAINTENANCE / TROUBLESHOOTING 37 MAINTENANCE Cleaning your TV Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan. CAUTION ••Before cleaning, turn the power off and disconnect the power cord and all other cables. ••When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name: LG Model: 40UB8000-UB, 49UB8200-UH, 55UB8200-UH, 60UB8200-UH, 49UB8300-UG, 55UB8300-UG, 65UB9200-UC Responsible Party: LG Electronics Inc. Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA Register your product Online! www.lg.