OWNER’S MANUAL * LED TV * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your set and retain it for future reference. UB80** UB82** UB83** *MFL68484511* www.lg.
TABLE OF CONTENTS ENGLISH TABLE OF CONTENTS 3 LICENSES 3 OPEN SOURCE SOFTWARE NOTICE 3 EXTERNAL CONTROL DEVICE SETUP 4 SAFETY INSTRUCTIONS 10 - Viewing 3D Imaging (Only 3D models) 12 INSTALLATION PROCEDURE 12 ASSEMBLING AND PREPARING 12 15 16 17 18 19 19 21 22 23 Unpacking Separate purchase Parts and buttons - Using the Joystick button Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables 24 MAKING CONNECTIONS 24 25 25
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com . In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SAFETY INSTRUCTIONS ENGLISH SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS y When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard. y Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. y Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
SAFETY INSTRUCTIONS ENGLISH y Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. y Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. y Never touch the wall outlet when there is leakage of gas, open the windows and ventilate. It may cause a fire or a burn by a spark. y Do not disassemble, repair or modify the product at your own discretion.
SAFETY INSTRUCTIONS y If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. y If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. y Only use the attachments / accessories specified by the manufacturer.
SAFETY INSTRUCTIONS ENGLISH y Please follow the installation instructions below to prevent the product from overheating. - The distance between the product and the wall should be more than 10 cm. - Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). - Do not install the product on a carpet or cushion. - Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
SAFETY INSTRUCTIONS y Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. y Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS ENGLISH Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment y Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.
SAFETY INSTRUCTIONS 11 Viewing Environment y Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age y Infants/Children - Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. y New features may be added to this TV in the future. y The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING ENGLISH ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 0 FLASHBK LIST MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK 13 EXIT L/R SELECT FREEZE RATIO Remote Control, Batteries (AAA) (Depending on model) The remote control will not be included for all sales market. (See p. 31, 32) Magic Remote, Batteries (AA) (Only UB80**, UB82**, UB83**) (See p.
ASSEMBLING AND PREPARING ENGLISH Scart Gender Cable (See p. 30) Composite Gender Cable (See p. 27, 28) Component Gender Cable (See p. 27) Stand Screws 8 EA, M4 x L20 (Only UB83**-ZB) (See p. 20) 4 EA, M4 x L20 (Only UB80**, UB82**) (See p. 19) Stand Screws 4 EA, M4 x L21 (Only UB83**-ZG) (See p. 19) Ferrite core (Depending on model) Stand Base (Only UB80**, UB82**) (See p.
ASSEMBLING AND PREPARING 6HSDUDWH SXUFKDVH LWHPV FDQ EH FKDQJHG RU PRGL¿HG IRU TXDOLW\ LPSURYHPHQW ZLWKRXW DQ\ QRWL¿FDWLRQ Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING ENGLISH Parts and buttons C type : UB83**-ZG A type : UB83**-ZB Screen Speakers Remote control and Intelligent1 sensors Power Indicator Joystick Button2 Screen Speakers Remote control and Intelligent1 sensors Power Indicator Joystick Button2 B type : UB80**, UB82** Screen Speakers Remote control and Intelligent1 sensors Power Indicator Joystick Button2 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
ASSEMBLING AND PREPARING 17 Using the Joystick button You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right. Basic Functions Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.
ASSEMBLING AND PREPARING ENGLISH Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING 19 UB83**-ZG Image shown may differ from your TV. A stand base 1 Attaching the stand B stand base UB80**, UB82** 1 A Stand Base 1 2 B Stand Base 1 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. 2 2 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV.
ASSEMBLING AND PREPARING UB83**-ZB ENGLISH 2 1 Stand Body (L) Stand Body (R) Stand Base 1 2 M4 x L20 4EA 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. 3 NOTE y Be sure to check the Stand Body (L), (R), when installing on the stand base.
ASSEMBLING AND PREPARING 21 Securing the TV to a wall y When attaching the stand to the TV set, place the screen facing down on a FXVKLRQHG WDEOH RU ÀDW VXUIDFH WR SURWHFW WKH screen from scratches. y Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
ASSEMBLING AND PREPARING ENGLISH Mounting on a wall Wall mount bracket MSW240 Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the ÀRRU :KHQ \RX DWWDFK WKH 79 WR RWKHU EXLOGLQJ PDWHULDOV SOHDVH FRQWDFW TXDOL¿HG SHUVRQQHO LG recommends that wall mounting be performed E\ D TXDOL¿HG SURIHVVLRQDO LQVWDOOHU We recommend the use of LG’s wall mount bracket.
ASSEMBLING AND PREPARING Image shown may differ from your TV. 1 Gather and bind the cables with the Cable Holder and the Cable Management. 2 Fix the Cable Management firmly to the TV. Cable Holder Cable management CAUTION y Do not move the TV by holding the cable holder, as the cable holder may break, and injuries and damage to the TV may occur.
MAKING CONNECTIONS ENGLISH MAKING CONNECTIONS Antenna connection This section on MAKING CONNECTIONS mainly uses diagrams for the UB83**-ZB models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS HDMI connection 700mA SatelliteMax DVI IN (4K@60Hz)/DVI IN IN 13 / 18 V 13 700mA / 18 V Max LNB IN 3 (MHL) (4K@60Hz)/ (Only satellite models) 1 (HDCP2.2) 2 (ARC) LNB IN Satellite (*Not Provided) (*Not Provided) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 ). HDMI DVD / Blu-Ray / HD Cable Box / HD STB / PC Transmits the digital video and audio signals from an external device to the TV.
MAKING CONNECTIONS ENGLISH Headphone connection NOTE y It is recommended to use the TV with the HDMI connection for the best image quality. y Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. y High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. y Supported HDMI Audio format : Dolby Digital (32 KHz, 44.1 KHz, 48 KHz), DTS(44.1 KHz, 48 KHz), PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz, 192 KHz) OUT EXT.
MAKING CONNECTIONS DVI IN 3 (MHL) (4K@60Hz)/ Component connection IN IN AV2 VIDEO AV2 ENGLISH DVI to HDMI connection COMPONENT AUDIO PR PB Y (4K@60Hz)/DVI IN / 1 (HDCP2.2) 2 (ARC) AV2 YELLOW (Use the composite gender cable provided.) RED BLUE GREEN RED RED BLUE GREEN RED RED BLUE WHITE RED WHITE YELLOW (*Not Provided) GREEN (Use the component gender cable provided.
MAKING CONNECTIONS 3 USB IN 2 HDD IN 1 COMPONENT AUDIO PR PB Y (4K@60Hz)/ VIDEO IN DVI IN AV2 3 (MHL) ENGLISH MHL connection Composite connection AV2 YELLOW (Use the composite gender cable provided.) MHL passive cable (*Not Provided) WHITE RED WHITE RED YELLOW YELLOW (*Not Provided) Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.
MAKING CONNECTIONS USB connection USB IN 3 ENGLISH Audio connection 29 2 OUT HDD IN 1 OPTICAL DIGITAL AUDIO HDD (*Not Provided) (*Not Provided) HUB (*Not Provided) USB (*Not Provided) OPTICAL AUDIO IN Digital Audio System You may use an optional external audio system instead of the built-in speaker. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS ENGLISH CI module connection Euro Scart connection IN/OUT (*Not Provided) (RGB) (RGB) AV1 AV 1 (Use the Scart gender cable provided.) (*Not Provided) Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable (or Scart gender cable) as shown. View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.
REMOTE CONTROL 31 The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) and ends to the label inside the compartment, and close the matching the battery cover. To remove the batteries, perform the installation actions in reverse. or CAUTION y Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL (Depending on model) ENGLISH (POWER) Turns the TV on or off. SUBTITLE Recalls your preferred subtitle in digital mode. RATIO RATIO Resizes an image. INPUT TV/ RAD SUBTITLE INPUT Changes the input source. Selects Radio, TV and DTV programme. TV/RAD 1.,;@ 2 abc 3 def LIST Accesses the saved programme list. (Space) Opens an empty space on the screen keyboard. 4 ghi 5 jkl 6 mno Q.VIEW Returns to the previously viewed programme. 7pqrs 8 tuv 9wxyz LIST 0 Adjusts the volume level.
MAGIC REMOTE FUNCTIONS 33 ENGLISH MAGIC REMOTE FUNCTIONS This item is not included for all models. When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
MAGIC REMOTE FUNCTIONS How to deregister the Magic Remote ENGLISH Voice recognition(Depending on model) Network connection is required to use the voice recognition function. 1. 2. Press the Voice recognition button. Speak when the voice display window appears on the left of the TV screen. The voice recognition may fail when you speak too fast or too slow. Use the Magic Remote no further than 10 cm from your face.
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE y Use the remote control within the specified range (within 10 m). You may experience communication failures when using the device outside the coverage area or if there are obstacles within the coverage area. y You may experience communication failures depending on the accessories. Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic Remote. This may cause communication failures.
MAINTENANCE / TROUBLESHOOTING ENGLISH MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
SPECIFICATIONS ENGLISH SPECIFICATIONS Wireless module (LGSBW41) specification Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.0 Frequency Range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) Frequency Range 2400 to 2483.5 MHz Output Power (Max.) 802.11a: 13 dBm 802.11b: 15 dBm 802.11g: 14 dBm 802.11n - 2.4GHz: 16 dBm 802.11n - 5GHz: 16 dBm Output Power (Max.
SPECIFICATIONS 3URGXFW VSHFL¿FDWLRQV PD\ EH FKDQJHG ZLWKRXW SULRU QRWLFH GXH WR XSJUDGH RI SURGXFW IXQFWLRQV ENGLISH 42UB82** 49UB82** 42UB820V-ZG 42UB820V-ZH 49UB820V-ZG 49UB820V-ZH With stand (mm) 951 x 604 x 218 1093 x 684 x 248 Without stand (mm) MODELS Dimensions (W x H x D) 951 x 569 x 37.3 1093 x 646 x 38.2 With stand (kg) 11.8 18 Without stand (kg) 11.5 17.
SPECIFICATIONS 100.0 mm x 55.0 mm x 5.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. LG Customer Information Centre Country Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.