Color Monitor USER GUIDE MANUEL D'UTILISATION MODEL : 57M
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction........................................................................................A1 Monitor Registration ..........................................................................A2 Important Precautions .......................................................................A3 Installing the Tilt/Swivel Base............................................................A5 Installation .........................................................................................
Introduction Thank you for purchasing an LG color monitor. This monitor supports OSD, DDC2B and Sound. It will give you high resolution performance and operation in a variety of video operating modes. It is compatible with standard PC type personal computers. The 15-inch (13.8 inches viewable) flat Square Tube design is excellent for use in a Windows or desktop publishing environment, where smaller screen sizes result in images difficult to see easily. The anti-glare treatment is easy on the eyes.
Monitor Registration The model and serial numbers are found on the rear of this unit. These numbers are unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Staple your receipt here. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No. : : : : : : Notice All rights reserved.
Important Precautions This unit has been engineered and manufactured to assure your personal safety, but improper use can result in potential electrical shock or fire hazard. In order not to defeat the safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Also follow all warnings and instructions marked directly on your monitor. On safety 1. Use only the power cord supplied with the unit.
Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During a lightning storm or when the monitor is to be left unattended for an extended period of time, unplug it from the wall outlet. Do not bring magnetic devices such as magnets or motors near the picture tube. On installation 1.
Installing the Tilt/Swivel Base Turn off the equipment and all attached options. Carefully set the monitor face-down with the underside facing you. Installation 1.Align the hooks on the tilt/swivel stand with the matching slot on the base (underside of the monitor). The open hooks of the stand should face the front of the monitor. The matching slots are on the first row of slots showing 2 pairs of slots. 2.Insert the hooks into the front and rear slots.
Installation The supply voltage is marked on the ID label located on the rear panel of the monitor. If your local voltage is different, do not use the monitor and contact your supplier before using the display. Connections To connect your monitor after the video adapter is properly installed: 1. Turn OFF the power to your computer and all its attached options. 2. Position the monitor and the computer so that you can easily get to the back panel of each. 3.
Location and Function of Controls Front View Headphone Jack Microphone Jack Control Panel Function Power ON/OFF Button Built-in Microphone Power (DPMS) Indicator Contrast Brightness Rear View ID Label AC Power Socket D-Sub Signal Cable Audio IN MIC OUT A7
Control Panel Function Power Indicator OSD Select /Adjustment Control Sound Mute Power ON/OFF Button MIC Brightness Contrast Sound Menu Increase OSD ON/OFF Enter Button Decrease Buttons on the front of the monitor allow you to adjust the image easily through an OSD menu. As you choose controls, the selected icon shows you what the chosen control will do. These pictures give you immediate understanding of the controls. The following is a description of use for each button.
OSD Select/Adjustment Control Use these buttons for selecting (highlighting) an OSD icon to be adjusted. It is also used for selecting the level of the selected item to be adjusted. Sound Menu: To adjust sound menu. Sound Mute Used to select mute on (means sound off) and mute off (means sound on). AUDIO 1024X768/85Hz MIC : Built-in microphone (Electret Condenser Microphone).
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description Horizontal Position To move picture image left and right. Moves the screen image left. Moves the screen image right. H POSITION 1024X768/85Hz U OSD ADJ: MENU: Horizontal Size To adjust image width.
OSD Adjust Description Trapezoid To correct geometric distortion. Makes the screen image narrower at the top. Moves the screen image wider at the top. TRAPEZOID 1024X768/85Hz U OSD ADJ: MENU: Rotate Screen To correct image rotation. Tilts the screen image left. Tilts the screen image right. ROTATE SCREEN 1024X768/85Hz U OSD ADJ: MENU: Zoom To adjust Horizontal and Vertical image size simultaneously. ZOOM Smaller the image size. Bigger the image size.
OSD Adjust Description Color To select color temperature, 9300K/ 7200K/ user. COLOR 9300K USER 7200K MENU: SEL: U OSD Decreases the amount of color in the image. Increases the amount of color in the image. COLOR R G B 47% 50% 50% U OSD SEL: OSD ADJ: OSD Position OSD U To correct OSD image's Horizontal position and Vertical position. OSD POSITION 1024X768/85Hz H POSITION: V POSITION: OSD ADJ: SEL: OSD Time To select OSD display time.
OSD Adjust Description Information To inform users of preset and user mode data. INFORMATION 1024X768/85Hz USER MODE: 5 PRESET MODE: 6 U OSD SEL: MENU : MENU : PRESET 31.4kHz 37.5kHz 46.8kHz 53.6kHz 63.9kHz 68.6kHz THE PRESET 1 2 3 4 5 6 MODE / 70Hz / 75Hz / 75Hz / 85Hz / 60Hz / 85Hz END USER MENU : 1 2 3 4 5 USER MODE 68.7kHz / 85Hz 67.5kHz / 75Hz 60.0kHz / 60Hz 46.5kHz / 87Hz 64.0kHz / 60Hz THE END USER PRESET Exit To disappear of the OSD on the screen.
Sound Selection and Adjustment ( ) You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the main Menu. OSD Adjust Description Volume Raises or lowers audio level. VOLUME 1024X768/85Hz 30% ADJ: MENU: Treble Raises or lowers treble level. TREBLE 1024X768/85Hz 30% ADJ: MENU: Bass Raises or lowers Bass level.
Power Management System This monitor incorporates new circuitry for lowering energy usage during idle time, following the Display Power Management Signalling (DPMS) guide lines of the Video Electronics Standards Association (VESA), and is certified as exceeding the EPA's Energy Star program for reduced power usage. For the power savings feature to operate, the monitor must be used with either a PC having power saving circuitry.
Video Memory Modes This multi-synchronous auto-scanning monitor can automatically detect and display several video modes falling within the monitor's scanning range of 30-70kHz Horizontal and 50-120Hz Vertical. In the PC area, this relates to a maximum flicker free usable resolution of 1280 x 1024 at a non-interlaced refresh rate of 60Hz Vertical. For convenience, the monitor has a 37 mode memory, of which 6 modes come from the factory preset to popular video modes as described below.
A note about the video memory modes: There is a total of 37 video memory modes, generally more modes than you will use at any one time. Of these 37 modes, 6 are permanent, factory fixed modes that cannot be changed, and another 6 are set at the factory, but may be overwritten to make more room. The remaining 25 modes are left blank (empty). If you use up the 25 blank modes and still have more new video modes, the monitor will store information in the other 6 soft preset modes for the new mode storage.
Microphone Operation On the left side there is a MIC (Microphone) jack. By plugging a microphone in here, it may reduce the long length of cable needed to reach the PC's sound card. In order to use this MIC jack, you need to use the cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the MIC input jack of your sound card (if available). If you lost the supplied cable, consult with your dealer or buy a stereo cable.
Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range.
Troubleshooting Symptom: SELF DIAGNOSTICS message. Possible causes: The signal cable is not connected. Symptom: OUT OF FREQUENCY message appears. Possible causes: The frequency of the sync input is outside the operating range of the monitor. OUT OF FREQUENCY HORZ: 30kHz-70kHz VERT: 50Hz-120Hz HF:120.8kHz VF:110.
Service 1. Unplug the monitor from the wall outlet and refer servicing to qualified service personnel when : The power cord or plug is damaged or frayed. Liquid has been spilled into the monitor. The monitor has been exposed to rain or water. The monitor does not operate normally following the operating instructions. Adjust only those controls that are covered in the operating instructions.
Specifications Sync Signal type Type H. sync V. sync Separate sync H. sync V. sync Signal Connector Pin Assignment Pin 1 Separate Sync 5 6 11 10 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A22 Red Green Blue Ground Self-Test Red Ground Green Ground Blue Ground NC Ground Ground SDA Horiz.Sync Vert.
Specifications Picture tube 15 inch (13.8 inches viewable) FST, Non-glare, 90 degree deflection, Darkface, 0.28 mm dot pitch Sync Input Horizontal Freq. : 30kHz - 70kHz (Automatic) Vertical Freq. : 50Hz - 120Hz (Automatic) Input Form : Separate, TTL, positive/negative Signal input : 15 pin D-Sub connector Video Input Display Area : 10.2 x7.5inch / 260 x 190mm (H x V) Input Form : Separate, RGB Analog, 0.
Monitor Limited Warranty for the United States and Canada LG Electronics U.S.A., Inc. will repair or at its option replace, without charge, your product which proves to be defective in material or workmanship under normal use, during the warranty period listed below from the date of original purchase. This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S. including Alaska, Hawaii, U.S. Territories and all Canadian Provinces.
