User Guide This is a 「User Guide」 installed on the TV. The contents of this guide are subject to change without prior notice for quality improvement.
❐❐To view program information Wheel(OK) ➾ Info. Displays information about the current program and/or current time, etc. ✎✎ Image shown may differ from your TV. Current time Sat, Jan.1 12:02 AM PM 2:00 PM 4:30 Program name or external device name Prev./Next Ch.
❐❐To set favorite channels HOME ➾ Settings ➙ CHANNEL ➙ Channel Edit 1 2 3 4 Move to the desired channel on Wheel(OK) button. Channel is selected. Press Set as Favorite. Select the desired favorite channel group. Select Enter. Favorite is set. ❐❐To use Favorite HOME ➾ Ch. List Channel list will appear. Select the desired preset favorite channel from Favorite List A to D.
❐❐To set Auto Tuning HOME ➾ Settings ➙ CHANNEL ➙ Auto Tuning Automatically tunes the channels. ✎✎ Channels are not registered properly unless the antenna/cable is connected correctly. ✎✎ Auto Tuning only sets channels that are currently broadcasting. ✎✎ If Lock System is turned on, a pop-up window will appear asking for password.
❐❐To set channels manually HOME ➾ Settings ➙ CHANNEL ➙ Manual Tuning Adjusts channels manually and saves the results. For digital broadcasting, signal strength, etc. can be checked.
❐❐To edit channels HOME ➾ Settings ➙ CHANNEL ➙ Channel Edit Edits the saved channels. Set as favorite, block/unblock and skip etc. the selected channel.
HOME ➾ Settings ➙ PICTURE ➙ Aspect Ratio Selects the screen aspect ratio. 16:9 Just Scan Set by Program 4:3 Zoom Cinema Zoom Resizes the image ratio to fit a 16:9 screen. Displays high-quality image without loss. ✎✎ In DTV/HDMI/Component (over 720p) mode, Just Scan is available. Depending on the input signal, screen aspect ratio changes to 4:3 or 16:9. Resizes the image ratio to fit 4:3 screen. Resizes the image to fit the screen width. The top and bottom parts of the image may be cut off.
✎✎ While viewing an external device, these cases may result in image burn: - a video with stationary caption (such as network name) - 4 : 3 aspect ratio mode for an extended period Take caution when using these functions. ✎✎ Available picture size may differ depending on the input signal. ✎✎ The screen aspect ratios on HDMI/RGB-PC input are available in 4:3 and 16:9 only.
❐❐To adjust pictures in PC input mode HOME ➾ Settings ➙ PICTURE ➙ Screen (RGB-PC) Adjusts picture in RGB-PC mode. Resolution Sets the desired resolution. ✎✎ Resolution may only be selected when the PC resolution is set to 1024x768, 1280x768 or 1360x768. Auto Optimizes picture. Configuration Position/Size/ If screen size or location is distorted, user can directly adjust Phase the screen size and position. Reset Resets all the changes on picture settings on PC input mode.
❐❐To set PC resolution 1 Right-click on the desktop of PC and select 「Properties」. 2 Click on 「Settings」 and refer to supported formats to set the resolution. 3 Select 「Advanced → Monitor → Monitor Settings」 on the setting window. Refer to supported formats to select the optimal vertical frequency. ✎✎ On PC mode, 1920x1080 resolution delivers the optimum picture quality. ✎✎ Resolution settings differ depending on the type of PC.
❌❌Formats Supported PC Input Mode HDMI-PC / RGB-PC HDMI-PC Resolution 640x350 720x400 640x480 800x600 1024x768 1152x864 1360x768 1920x1080 1280x1024 Horizontal Frequency (KHz) 31.468 31.469 31.469 37.879 48.363 54.348 47.712 67.5 63.981 Vertical Frequency (Hz) 70.09 70.08 59.94 60.31 60.00 60.053 60.015 60.00 60.
HOME ➾ Quick Menu ➙ AV Mode Views the TV with the best picture / audio optimized for different AV modes. Off Views with the value set at the picture / sound menu. Cinema / ꔧ Cinema Optimizes picture and audio settings for movies. Game Optimizes picture and audio settings for games. ✎✎ ꔧ [Depending on model] THX (Thomlinson Holman’s Experiment) is an audio and video certification standard established by George Lucas and Thomlinson.
❐❐To adjust pictures with Picture Wizard HOME ➾ Settings ➙ PICTURE ➙ Picture Wizard Ⅱ Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for the optimum picture quality without expensive pattern devices or help from a specialist. Follow the instructions to obtain the optimum picture quality.
❐❐To select Picture Mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode Selects the picture mode optimized for the viewing environment or the program. Intelligent Sensor Vivid Standard Detects the ambient illumination and automatically adjusts TV's brightness level to reduce power consumption. Automatically adjusts the brightness, sharpness, color or tint for optimum picture quality. Heightens contrast, brightness, and sharpness to display vivid images.
Cinema/ ꔧ Cinema Displays images that have been optimized for movies or Game games. [ꔧ Cinema : Depending on model] ꕋ Expert Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu is ISF-certified and provided for picture tuning experts. (ISF logo can only be used on ISF-certified TV units.) ISFccc: Imaging Science Foundation Certified Calibration Control ✎✎ Depending on the input signal, available range of picture modes may differ.
❐❐To fine-tune picture mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Backlight/Contrast/ Brightness/Sharpness/Color/Tint/Color Temp. Selects the desired Picture Mode first. Backlight Adjusts the display brightness by varying the brightness of the LCD panel. Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark.
Tint Color Temp. Adjusts the red/green color balance. Adjusts the overall tone of colors to hot or cool. ✎✎ Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.
❐❐To set advanced control HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Advanced control/ Expert Control For each picture mode, screen can be calibrated; or for a special screen, picture settings can be adjusted. Selects the desired Picture Mode first. Dynamic Contrast Adjusts the contrast to the optimal level according to the image's brightness. Dynamic Color Adjusts colors to make the image appear in more natural colors. Clear White Enhances whites on screen to make the image brighter and sharper.
Skin Color : Skin color spectrum can be separately set to implement the skin color defined by the user. Preferred Color Grass Color : Natural color spectrum (meadows, hills, etc.) can be separately set. Sky Color : Sky color is set separately. Super Resolution Provides a crystal-clear picture by improving the details in an area that has a blurry or unclear picture. Gamma Sets the gradation curve according to the output of picture signal in relation to the input signal.
Color Filter Filters a specific color spectrum in RGB colors to fine-tune color saturation and hue accurately. Expert Pattern Patterns used for expert adjustment. White Balance Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via Method / Pattern and the like. Color Management System This is a function used by experts when they adjust colors with test pattern of six colors (Red/Green/Blue/Cyan/ Magenta/Yellow) without affecting other color areas.
❐❐To set additional picture options HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option Adjusts detailed setting for images Noise Reduction Reduces screen noise in the video. MPEG Noise Reduction Reduces noise caused by compressing digital video. Black Level Adjusts the brightness or darkness of the screen to fit the black level of the picture input using the screen's degree of darkness (black level). Real Cinema Optimizes the screen for movie viewing.
❐❐To reset Picture Mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Reset Resets the values customized by the user. Each picture mode is reset. Select the desired picture mode.
HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ TruMotion Corrects images to display smoother motion sequences. Smooth Clear User De-Judder value is set at 3. De-Judder value is set at 7. De-Judder can be set manually. • De-Judder : This function adjusts juddering of the screen. ✎✎ If the video signal is 60Hz, TruMotion may not work.
HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ LED Local Dimming Brightens bright areas and darkens dark areas of the image for maximum contrast and minimum blur while reducing power consumption. Off Turns off LED Local Dimming. Low Expresses in natural black tones. Use this setting for viewing movies. Medium Deepens black tones. Use this setting for regular TV viewing. High Deepens black tones and delivers clearer image more than Medium. Perfect for viewing in brightly lit areas.
❐❐To use Sound Mode HOME ➾ Settings ➙ SOUND ➙ Sound Mode Optimizes TV audio to the selected sound mode. Standard Suitable for all types of video Music/Cinema/Sport/ Sets audio optimized for a specific genre. Game Vivid User Setting Delivers distinct voices with rich bass and clear, high-pitched sounds. Adjusts the volume to the desired level using the User EQ.
❐❐To fine-tune the volume HOME ➾ Settings ➙ SOUND ➙ User EQ Sets Sound Mode at User Setting first. 100 Hz / 300 Hz / 1 kHz/ 3 kHz / 10 kHz Reset Sets EQ by manually adjusting sound bands. Resets previously changed equalizer value.
❐❐To set Volume Mode HOME ➾ Settings ➙ SOUND ➙ Volume Mode Sets various modes for volume control. Auto Volume Sets Auto Volume to On. Different volume outputs from channel to channel. They are then automatically adjusted for convenient TV watching when, clicking through different channels. Volume Control Using a single volume curve may result in an inaudible or loud sound depending on the environment. This function adjusts comfortable volume levels depending on day/night.
❐❐To use Sound Optimizer function HOME ➾ Settings ➙ SOUND ➙ Sound Optimizer Allows optimized sound for individual TV installation. Normal Wall Mount Type Stand Type General sound mode Optimizes sound for a wall-mounted TV. Optimizes sound for a stand-mounted TV.
❐❐To use Virtual Surround feature HOME ➾ Settings ➙ SOUND ➙ Virtual Surround LG's proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. ✎✎ When Clear Voice II is set to On, Virtual Surround cannot be selected. ❐❐To use Clear Voice II feature HOME ➾ Settings ➙ SOUND ➙ Clear Voice II Boosts voice clarity.
❐❐To set AV Sync HOME ➾ Settings ➙ SOUND ➙ AV Sync. Synchronizes unmatched video and audio. Select AV Sync. to On to synchronize audio output (TV speaker or SPDIF) with the video. TV Speaker Adjusts the sync of the sound from the TV's internal speakers. The "-" button makes the sound output faster and the "+" button slower than the default value. SPDIF (Sony Philips Digital InterFace) Adjusts the sync of the sound from speakers connected to digital audio out terminal.
Bypass Outputs broadcasting signals or the audio of an external device without audio delay. Audio may be output before video as it takes time to process video input into the TV. ❐❐To use ARC mode HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ ARC Mode External audio devices that support Audio Return Channel (ARC) can be connected with High-Speed HDMIⓇ cable without an extra optical audio cable to output SPDIF. It interfaces with SIMPLINK.
Off On Even when the connected ARC-supported external audio device is turned on, audio output is not processed through the external audio device’s speakers. When an ARC-supported external audio device is turned on, audio output is automatically processed through the external audio device’s speakers. SIMPLINK must be turned on. For SIMPLINK, refer to 「General → To use input device」. ✎✎ Connect to ARC-only terminal when connecting to external devices.
❐❐To adjust audio balance HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Balance Adjusts left/right audio balance.
❐❐To use TV's speakers HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ TV Speaker When listening to the speakers on the external audio devices connected to TV such as home theater, TV speaker may be turned off. When there are SIMPLINK connected home theater devices, selecting TV Speaker to OFF will automatically turn on home theater. Off There is no sound from the TV speakers. Delivers TV sound through external audio device speakers connected to the TV.
❐❐To use Digital Sound Out HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Digital Sound Out Sets up Digital Sound Out.
❐❐To select external input HOME ➾ Input List Selects external input. INPUT LIST Selects speaker. TV Speaker Selects input. TV USB AV Component HDMI1 HDMI2 Change Device Name SimpLink Setting Sets SIMPLINK. Edits the name of external device connected to external terminal.
❐❐To use SIMPLINK SIMPLINK allows users to control and manage multiple multimedia devices using the convenient TV remote control and SIMPLINK menu. 1 Connect the TV's HDMI IN terminal with SIMPLINK device's HDMI output terminal using HDMI cable. For home theater units with SIMPLINK function, connect HDMI terminals as above and use an optical cable to connect Optical Digital Audio Out from the TV to Optical Digital Audio In of the SIMPLINK device. 2 Select HOME ➾ SIMPLINK. SIMPLINK menu window appears.
✎✎ This function works only on devices with the SIMPLINK logo ( Make sure that the external device has a SIMPLINK logo. ). ✎✎ To use SIMPLINK function, use a high-speed HDMIⓇ cable (with CEC, or Consumer Electronics Control feature added) and No. 13 pin connected for information exchange between devices. ✎✎ Turn on or select the media of a device with home theater features to see the speaker switch to HT Speaker. ✎✎ Connect with an Optical cable (sold separately) to use HT Speaker.
❌❌Explanation on SIMPLINK features Direct Play Select multimedia device. Disc playback Power off all devices Play the multimedia device on the TV instantly without extra steps. Select the desired device through the SIMPLINK menu and instantly control it from the TV screen. Manage the multimedia device with the TV remote control. Turning the TV off with Auto Power function On in SIMPLINK setting will turn the power off on all SIMPLINKconnected devices.
Sync Power on Speaker If the Auto Power function is set to On in the SIMPLINK settings, turning on a SIMPLINK device will turn the TV on. Selects speaker on the home theater unit or TV.
HOME ➾ Settings ➙ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. Auto Off Minimum/ Medium/ Maximum Screen Off TV sensor detects the ambient lighting and automatically adjusts the screen brightness. • Min. Luminance : Select the minimum brightness for the screen under low ambient light. • Sensing Strength : Select the TV's range of brightness in the viewing environment. Turns off the Energy Saving mode. Applies the pre-set Energy Saving mode.
❐❐To use Sleep Timer HOME ➾ Settings ➙ TIME ➙ Sleep Timer Turns off the TV after a prescribed number of minutes. To cancel the Sleep Timer, select Off.
❐❐To set current time HOME ➾ Settings ➙ TIME ➙ Clock Checks or changes the time while watching TV. Auto Manual Synchronizes the TV clock to the digital time information sent by the TV station. Sets the time and date manually if the auto setup does not correspond to the current time.
❐❐To set the TV to turn on and off automatically HOME ➾ Settings ➙ TIME ➙ On Time/Off Time Sets On/Off time. Select Off on Repeat to discontinue On Time/Off Time. ✎✎ To use On Time/Off Time, set the current time correctly. ✎✎ Even when the On Time function is on, the TV will turn off automatically in 120 minutes when no button is pressed within that time.
❐❐To set password HOME ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎✎ The initial password is set as 「0000」.
❐❐To lock system HOME ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Block Channel Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is blank and the audio is muted. To watch a locked channel, enter the password.
Movie Rating [Depending on model] Blocks the movies that are only broadcasted on the TV and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating.
TV RatingChildren [Depending on model] Blocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature.
Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). ✎✎ The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children.
Downloadable Rating Input Block [In Digital mode Only] This function operates only when TV has received Region5 Rating data. The name of the rating option may differ. Block the input sources.
❐❐To set password HOME ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎✎ The initial password is set as 「0000」.
❐❐To lock system HOME ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is Block Channel blank and the audio is muted. To watch a locked channel, enter the password.
TV RatingEnglish [Depending on model] Selecting Canadian English rating system.
TV RatingFrench [Depending on model] Selecting Canadian French rating system.
[In Digital mode Only] Downloadable This function operates only when TV has received Region5 Rating Rating data. The name of the rating option may differ. Input Block Block the input sources.
HOME ➾ Settings ➙ OPTION ➙ Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Audio Language Voice Search Language Selects a screen menu language. [In Digital Mode Only] Selects the desired language when watching digital broadcasting containing several audio languages. Select the language to make voice search. ✎✎ Only the voice search adopted model can support this setting.
HOME ➾ Settings ➙ OPTION ➙ Caption View subtitles when the TV station provides subtitled programing. Program subtitles work only on digital/analog broadcasts or external input. Change Caption to On and select caption setting. Mode CC 1-4 (Closed Captioning) / Text 1-4 Text 1-4 Displays the audio portion of a TV program as text on the TV screen. CC1 is the most common mode in use. Field 1 data channels: two Captions (CC1, CC2), two Text (T1, T2).
Digital Option Set up the size and color of the subtitles on Digital Option. Please select Set by Program or Custom. Select Custom to adjust minute options such as the subtitles’ size and color.
❐❐To register the Magic Remote Control To use the Magic Remote Control, register it with your TV first. Register Magic Remote Control as follows: 1 Turn on the TV and wait for about 10 seconds and then press Wheel(OK) button while pointing the remote control at the TV. 2 The remote control is automatically registered and a registration completion message appears on the TV screen. ✎✎ If you failed to register the Magic Remote Control, turn off the TV and try again.
❐❐To re-register the Magic Remote Control 1 Press the HOME and BACK buttons at the same time for about 5 seconds. 2 Point the remote control at the TV and press Wheel(OK) button for about 5 seconds. ✎✎ Press the BACK button while pointing the remote control at the TV for five seconds to reset and re-register it.
❐❐To set the pointer of the Magic Remote Control HOME ➾ Settings ➙ OPTION ➙ Pointer Sets the speed and shape of the pointer that appears on the TV screen. Speed Sets the moving speed of the pointer. Shape Chooses from different shapes of the pointer. Size Chooses the size of the pointer. Set it to On. If there is any misalignment between the pointer and the actual direction the remote control indicates, move the Alignment Magic Remote Control left and right to realign.
✎✎ If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote Control to the right and left. Then, it appears again. ✎✎ If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. ✎✎ Use within an effective distance of 33 ft. (10 meters).
✎✎ Electronic devices nearby may cause communication interference. Devices such as microwave oven and wireless LAN use the same frequency range (2.4 GHz) as the Magic Remote Control, which may interfere with the remote control. ✎✎ The Magic Remote Control may be broken if dropped or damaged in any other way. ✎✎ Do not drop or subject the Magic Remote Control to heavy impacts.
❐❐To use the pattern gesture function Press the Wheel(OK) button with the normal video screen on and draw a pattern toward the screen. Previous channel: Moves back to the previous channel. Recent list: Shows channels recently watched. ✎✎ It may not work when certain windows are open.
❐❐To set Power Indicator HOME ➾ Settings ➙ OPTION ➙ Standby Light [Depending on model] Turns on/off the standby light that is on the front panel of the TV. ❐❐To change TV mode HOME ➾ Settings ➙ OPTION ➙ Mode Setting Selects Home Use or Store Demo. For use in the home, select Home Use. Store Demo is for store display.
❐❐To return to initial settings HOME ➾ Settings ➙ OPTION ➙ Initial Setting Returns to initial default mode by deleting all user settings. Once initialization is completed, the TV will turn off and then back on. ✎✎ If Lock System is turned on, a pop-up will be prompted to ask for password. ✎✎ Do not turn off the power during initialization.
❐❐Using the Home Screen Press HOME button on the remote control. Thanks to the Smart TV’s design, users have convenient access to a wealth of Content and applications via the easy-to-use menu arranged by themes (Live TV, Card, My Apps). Sign in Premium Cinema Weather More... News 11-1 MBC HD More...
❐❐To use and edit MY CARD HOME ➾ MY CARD To enable you to easily check and access a wide variety of content and functions, the main functions are grouped into categories and displayed on cards. By selecting the card name, you can go to that category page. Select Edit at the top of the home screen to switch the position of the cards or create your own card. (You cannot edit the Live and Premium cards.
❐❐To use My Apps HOME ➾ My Apps Select My Apps at the bottom of the home screen or press the MY APPS button on the remote control. Select My Apps to check apps pre-installed apps and apps you have downloaded. My Apps Input List Settings Search Internet LG Smart... Program Guide Media Link Select the desired app to run.
❐❐To❐edit❐items❐in❐My❐Apps HOME❐➾❐My❐Apps❐➙❐Edit On the My Apps page, select Edit at the top of the screen to move or delete apps. Please note that system apps can be moved, but cannot be deleted. ✎ On models equipped with the Magic Remote Control, you can move apps or delete them by selecting and then dragging them.
❐❐To manage LG Smart TV settings HOME ➾ Settings ➙ OPTION ➙ Smart TV Setting Sets many Smart TV-related settings and manages IDs. Changes the Country Setting on the Smart TV. Smart TV Country Receives Premium service and LG Smart World of the desired country. Premium Version Displays Premium service version. ID List Checks and delete IDs signed in to TV. Reset Deletes all registered ID information from TV. Legal Notice Shows Legal Notice for Smart TV.
A wireless or wired network connection is necessary to use the Smart TV features. Once the network connection is established, Premium Content, LG Smart World, DLNA, and more are available. ❐❐Network connection by one-click It’s easy to connect to a wired/wireless network. Select HOME ➾ Settings ➙ NETWORK ➙ Network Connection to be automatically connected to an available network. Refer to prompts on the TV.
❐❐To connect network through Set Expert HOME ➾ Settings ➙ NETWORK ➙ Network Connection Used in special circumstances such as in offices (For example, when a static IP is needed). 1 Select a network connection either through Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods. AP List Enter the SSID WPS-PBC Connects the network by selecting a network from the AP (Access Point) List. Connects by typing in the name of wireless AP.
WPS-PIN Ad-hoc Connects easily by typing in the PIN on the web site of the desired wireless AP. Connects directly to via a wireless-enabled PC or mobile phone.
❐❐To use Wi-Fi Screen function HOME ➾ Settings ➙ NETWORK ➙ Wi-Fi Screen Share This TV supports Wi-Fi Direct and WiDi wireless connections. It also supports Wi-Fi Screen Share in Smart Share. Use this menu to set up these types of connections. 1 Set Wi-Fi Screen Share to On. (If you do not use it, please change it to Off.) 2 Enable the Wi-Fi Direct settings on the device that you want to connect to. 3 A list of devices that can be connected to the TV is displayed. 4 Select a device to connect.
❐❐Warning when setting network ✎✎ Use standard LAN cable (connect to Cat5 or higher with RJ45 connector, 10 Base-T, or 100 Base TX LAN port). ✎✎ Resetting modem may fix some network connection problems. Turn the power OFF, disconnect and reconnect it, and then turn the power on to solve the problem. ✎✎ LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
✎✎ DSL service must use the DSL modem; and cable service must use the cable modem. Since only a limited number of network connections may be available, TV network setting may not be used depending on the contract with Internet service provider. (If the contract does not allow more than one device per line, only the already-connected PC may be used.) ✎✎ A wireless network can experience interference from other devices that use the 2.4 GHz frequency (wireless phone, Bluetooth device, or microwave oven).
✎✎ The access point device must support wireless connections and wireless connection feature must be enabled on the device to have AP (access point) connection. Contact the service provider for availability of wireless connections on the access point. ✎✎ Check SSID and security settings of the AP. Refer to the appropriate documentation for SSID and security settings of the AP. ✎✎ Invalid settings of network devices (wired/wireless line sharer, hub) can cause the TV to operate slowly or not operate properly.
❐❐To use Smart Share™ HOME ➾ Smart Share Provides photo/music/video files on TV by connecting a USB or home network (DLNA, Media Link). SMART SHARE Contents Type More.... Recently Watched More.... e Linked Devic Newly Added More.... More.... ALL VIDEO MUSIC PHOTO RECORDED TV Settings Connecting Guide Displays photo/music/video files on all devices connected to TV.
❐❐To control movie play Controls play and sets options while viewing movies. Selects the desired point and plays. Option Plays Sets options. Stops playback and returns to the list.
❐❐To control photo view Controls playback and sets options while viewing pictures in full screen. Slideshow BGM Displays photos as a slideshow. Plays background music. Rotates or enlarges the picture. Option List Stops playback and returns to the list. Sets options.
❐❐To control music play Controls play and sets options while playing music. Selects the desired point and plays. Option Plays Sets options. List Returns to the list.
❐❐To set Smart Share™ related functions HOME ➾ Smart Share ➙ Settings Changes settings related to Smart Share content play. ❌❌Advanced Setting TV Name Network Status Wi-Fi Screen Share Share My TV Changes the name that appears when searching for the TV from other devices. Checks the network connection. Allows use of wireless connection functions such as Wi-Fi direct and WiDi. Allows/Disallows connecting to TV from other devices. Turns on/off DMR (Digital Media Renderer) connection.
Auto Play on Receive DivX VOD Accepts/Rejects Content transferred from other devices. Registers or releases DivX. Checks DivX Registration Code for playing DivXprotected videos. Register at http://vod.divx.com. Uses Registration Code to rent or purchase movies at www.divx.com/vod. ✎✎ When using the DivX Registration Code of another device, the rented/purchased DivX file cannot be played. Use only the DivX Registration Code granted to this device.
❌❌History To delete contents history, press button below. Use the contents at Contents Type and Linked device menu. ❌❌Privacy Check the device that you do not want to open at Newly Added and Recently Watched menu.
❐❐Smart Share™ supporting file Maximum data transfer rate : 20 Mbps (Mega bit per second) External supported subtitle formats : *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.
❌❌Video Supported Codec Maximum: 1920 x 1080 @30p Extension .asf .wmv .divx .avi .mp4 .m4v .mov Codec Video Audio Video Audio VC-1 Advanced Profile, VC-1 Simple and Main Profile WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion Jpeg MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, LPCM, ADPCM, DTS Video H.
Extension .mkv .ts .trp .tp .vob .mpg .mpeg Codec Video Audio Video Video Audio H.264/AVC HE-AAC, Dolby Digital H.
❌❌Available music file File type mp3 Item Info Bit rate 32 Kbps - 320 Kbps Sample freq.
❌❌Available photo file File type Item Profile baseline Available file SOF0: SOF1: Extend Sequential type SOF2: Progressive 2D(jpeg, jpg, jpe) Minimum: 64 x 64 Photo size Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H)
❐❐Caution for playing video ✎✎ Some subtitles created by users may not work properly. ✎✎ The video and subtitle files should be placed in the same folder. In this case, you must assign the same names for the video and subtitle files for proper display. ✎✎ We do not support any stream that contains GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation). ✎✎ Only H.264/AVC profile level 4.1 and lower is supported. ✎✎ The file size limit is dependent on the encoding environment.
✎✎ Video files created by some encoders may not be played back. ✎✎ Video files in formats other than the ones specified here may not be played back. ✎✎ Playback of video files stored on the USB device that do not support High Speed, may not work properly. ✎✎ The TV supports DTS audio codec when the USB video file playback.
DLNA stands for Digital Living Network Alliance, which allows users to access video/music/photo files stored in a PC or server and enjoy them on TV via home networking. ❐❐To connect a DLNA-authenticated Smartphone TV and the smartphone should be on the same network. 1 Enable Wi-Fi on the smartphone. 2 Install/run the app to share content on the smartphone. 3 Run “Share my mobile phone Content”. 4 Select the kind of Content (video/audio/photo) to play. 5 Select the video, music, or photo file to play on TV.
❐❐To connect a DLNA DMR (Digital Media Renderer) With Windows 7 PC operating system or DLNA-certified device (e.g. mobile phone), music/videos/photos may be played on the TV without installing a separate program 1 Configure the TV and PC on the same network. Configure Windows 7-installed PC on the network. 2 To replay a music/video/photo file, right-click on the file and use the “Remote Playback” Windows 7 feature. For playback on devices like a mobile phone, refer to the model’s user guide.
❐❐To connect DLNA DMP (Digital Media Player) With a PC having Nero MediaHome 4 Essentials, music/video/photo files may be replayed on the TV by linking them via home networking. 1 Configure the TV and the PC on the same network. TV and each device should be connected through a single access point to enable DLNA and Media Link service. 2 Install Nero MediaHome 4 on PC from the web site (http://www.lg.com). Before installation, close all running programs including firewall and AntiVirus programs.
3 Indicate files/folders to share through Nero MediaHome 4 Essentials installed on PC. 1. Run "Nero MediaHome 4 Essentials" installed on PC. 2. Select folder items to share. 3. Configure the shared folder and click "Start Server." Server starts. ✎✎ If the shared folder does not appear on TV, click the Local Folder tab and search again. ✎✎ For more information and software-related information, refer to the web site http://www.nero.com.
❌❌PC requirements for installing Nero MediaHome 4 Essentials program: • WindowsⓇ XP (Service pack 2 or later), Windows VistaⓇ, WindowsⓇ XP Media Center Edition 2005 (Service pack 2 or later), Windows ServerⓇ 2003 (Service pack 1 or later) • WindowsⓇ 7 Home Premium, Professional, Enterprise or Ultimate (32- and 64-bit) • Windows VistaⓇ 64-bit version (application runs in 32-bit mode) • WindowsⓇ 7 64-bit version (application runs in 32-bit mode) • Hard drive space: more than 200 MB
• CPU: 1.2 GHz IntelⓇ PentiumⓇ III or AMD Sempron™ 2200+ processor • Memory: more than 256 MB RAM • Graphic card: more than 32 MB, resolution of at least 800 x 600 pixels and at least 16-bit color settings supported • WindowsⓇ Internet ExplorerⓇ 6.0 or later • DirectXⓇ 9.0c revision 30 (August 2006) or later • Network environment: 100 MB Ethernet, Wireless LAN WLAN (IEEE 802.
❌❌If a DLNA malfunction occurs ✎✎ If a DLNA feature does not work properly, check network settings. ✎✎ A 5-GHz access point is needed to view 1080p pictures via DLNA. A 2.4-GHz access point may cause broken images or other problems. ✎✎ DLNA may not work properly in the wireless network. It is recommended to connect to the wired network. ✎✎ Multi audio and internal subtitles are not supported in DLNA mode.
✎✎ The DLNA feature cannot be used with some access points that do not support multicasting. For more information, refer to access point manual or consult with the manufacturer. ✎✎ Supported file types may differ depending on the DLNA server environment, even for the file types supported by TV. ✎✎ Too many sub-folders and files included in one folder may cause a malfunction. ✎✎ Information about the file from DLNA server may not be displayed correctly.
❐❐To connect Media Link Install Plex Media Server on a PC or laptop connected to the same network as your Smart TV to access a variety of multimedia including photos, videos, and music. 1 Install the Plex Media Server program on PC/laptop. Visit web site at (http://www.lg.com) and download the Plex program compatible with the operating system you are using. 2 After installing the program, right-click the Plex icon that should be in the computer’s app tray.
❐❐To use Media Link HOME ➾ Media Link MEDIA LINK Sort by server Device Selection Information may be provided in English. PLEX Channels Back Exit If Media Link can see Plex servers on your network, it will automatically connect and will show the folders on the main screen.
❐❐System requirements for installing PLEX • Minimum requirements PC with at least 1.6 GHz Intel Core Duo Processor and Windows XP SP3, minimum 512 MB of RAM • Recommendations for HD Content transcoding (720p and 1080p) PC with at least 2.
❐❐Caution for using Media Link ✎✎ PLEX media server version installed on Mac or PC supports the version of 0.9.1.14 or later. ✎✎ For the following languages, GUI language is displayed in English and the data being delivered are not displayed: : Thai, Arabic, Persian, Hebrew, Kurdish When replaying video plug-in of a media not supported by the TV, there may be a delay in initial buffering due to extra processing time. The computer’s conversion speed may differ depending on its performance and network speed.
✎✎ When replaying music clips, there is no support for playing with clip moving. (Same as DLNA.) ✎✎ When playing high-definition videos through a Wi-Fi connection, there may be delays or improper playback. ✎✎ The TV may not recognize the computer if the AP settings are not correct. (e.g., When setting the “multicast forward” feature on the AP device, the TV cannot recognize the PC on a Wi-Fi connection.) ✎✎ For some plug-ins, play function may be limited depending on media types.
❐❐To connect USB Connect a USB storage device (external HDD, USB memory) to the USB port of TV to enjoy the content files stored in the USB device on your TV. To remove a USB storage device, choose the Quick Menu ➙ USB Device to remove and check for message that the USB has been removed before taking it out physically. If detached early, an error may occur on the TV or USB storage device. ✎✎ After selecting to remove USB device, it is impossible to read the USB storage device.
❐❐Caution when using USB storage device ✎✎ If USB storage device has a built-in auto recognition program or uses its own driver, it may not work. ✎✎ Some USB storage devices may not work or work improperly. ✎✎ Use only USB storage devices formatted with FAT32 or NTFS File System provided by Windows. ✎✎ For external USB HDD, it is recommended to use device rated at 5V and less than 500 mA rated current. ✎✎ It is recommended to use a USB hub or hard disk drive with power supplied.
✎✎ It is recommended to use USB Memory Stick with 32 GB or less and USB HDD with 2 TB or less. ✎✎ For USB HDD with energy-saving features, turn off and turn on again if it does not work properly. For more information, refer to the user manual of USB HDD. ✎✎ Data in USB storage device can be damaged so be sure to back up important files in a separate storage device. Data maintenance is the user’s responsibility and the manufacturer is not responsible for any data loss.
❐❐To❐use❐Premium HOME❐➾❐Premium This service gives you easy access to a wide variety of content, such as video, news and UCC (User Created Content), at any time, as long as you are connected to a network. For Premium content, specialized country-specific services are offered that take into account regional content, in addition to globally provided content. PREMIUM Search Broadcasting image Premium Content Select desired Content.
❐❐To use paid Content Some Premium Content is provided as for-fee services. To purchase for-fee services, use either LG Electronics’ proprietary billing system or that of each content provider. Before using the LG billing system, you will need to sign up for membership and register payment information on TV or the website (www.lgappstv.com) . You can sign up for membership on the login screen on your TV or our website. You can then log into both the TV and the website with one ID.
1 Click Sign In button in upper right corner of Home screen to sign in. 2 Move to the desired Premium service. (For some premium services, separate sign-in is required after signing up for the premium service.) 3 After checking the content’s pricing and service information, click the Purchase button. (There may be limitations on the available period and number of times depending on content.) 4 Once the purchasing process is completed, view the paid content by clicking the Buy button.
❐❐To reset Premium HOME ➾ Settings ➙ SUPPORT ➙ Initialization of Premium Premium list, Premium information, country setting, and user sign-in information will be reset. When an error occurs during Premium update, reset will fix the problem.
✎✎ Content on offer by service providers are subject to change to enhance their service quality or deletion without any prior notice. Refer to the web site of each content provider for questions, troubleshooting, or latest information about Content. LG Electronics does not take any legal responsibility for content services and related information including discontinuation of service by the service provider. ✎✎ The quality of Premium service may be affected by Internet connections.
❐❐To use LG Smart World HOME ➾ LG Smart World LG Smart World is a TV application service available through Smart TV Service. You can download and enjoy many different apps (for fee or free) including education, entertainment, life and news. My Apps All Entertainment Hot Top Paid Game Life Top Free Education New News/Information Total Sign in. When you sign in, ID is displayed. When you select the ID, you can select My Page and Sign Out. Select the app to install.
❐❐To sign up with LG Smart World HOME ➾ Sign In Sign up is required to download and run apps. 1 Select Sign Up and agree to Legal Notice. 2 Enter ID and password. 3 In Confirm Password box, enter password again. 4 Select OK to complete sign-up process. ✎✎ You can sign up for membership on either your TV or the website (www. lgappstv.com). ✎✎ After signing up for membership, log into your TV and our website with the same ID. ✎✎ You can sign in up to five TVs with a single ID.
❐❐To install app on TV HOME ➾ LG Smart World 1 2 3 4 5 Click the Sign In button at the top of the home screen to log in. Select the LG Smart World card. Select an app you want from the list. Check the details of the app, then select the Install or Buy button. Check that you have the functions or TV accessories required to install the app, then select the OK button. 6 For paid apps, payment and purchase authentication is required. 7 Select Run once installation is complete to run the app immediately.
✎✎ You can purchase apps from PC or TV but you must use the TV to install and run them. ✎✎ If you have insufficient storage space on the TV, you can download apps to a USB storage device connected to the TV’s USB Apps port. Apps stored on a USB device are available to run/delete/move via the My Apps screen. ✎✎ The USB storage device containing apps cannot be used for saving other data.
❐❐To manage my information HOME ➾ LG Smart World 1 2 3 4 Sign in. Select the currently signed-in ID at the top of the screen. Select My Page. Manages by examining Member Information, My Purchased Apps List and TV Installed Apps List.
My Information Shows basic information about the ID currently signed in. To change your member information, please visit www.lgappstv.com on your PC. Payment Inquiry Views Payment History with the ID you have signed in. Purchased Apps Views My Purchased Apps List with the ID you have signed in. You can delete/re-install the purchased apps.
HOME ➾ Search You can search apps and contents using the Search function of LG Smart TV. When you enter keywords using the input device, such as the remote control, you can find apps of LG Smart World and some contents of the Premium service. Links are also provided to go for web search. If you are using Smart Share, you can also search contents of Smart Share. The Search categories and content types vary depending on the country and will be kept updating. Enters search terms.
❐❐To use the voice recognition function ❌❌Using this function through search 1 Go to My Apps ➾ Search. Select the voice recognition icon ( ) on the left of the text field. 2 After the voice recognition window appears, speak slowly and clearly. When the TV starts processing what you said, a message of "Processing..." appears. 3 After the voice recognition is completed, the Similar List window pops up. If the pop-up window does not have the results you want, press Retry to try again.
❌❌Using this function in the Internet (Web browser) 1 Go to My Apps ➾ Internet. Move the Magic Remote Control pointer in the text field on a website to open the virtual keyboard. 2 Select the voice recognition icon ( ) on the left of the text field on the virtual keyboard. 3 After the voice recognition window appears, speak slowly and clearly. When the TV starts processing what you said, a message of "Processing..." appears. 4 After the voice recognition is completed, the Similar List window pops up.
❌❌Using this function in the Social Center 1 2 3 4 5 Go to My Apps ➾ Social Center. Log in with your LG Smart TV (www.lgappstv.com) ID. Select the social network site you want and log in with your site ID. Select the voice recognition icon ( ) on the left of the text field. Speak slowly and clearly after the voice recognition window appears. If the TV starts recognizing your voice, a message of "Processing..." appears.
✎✎ Check the network connection before using the voice recognition function. ✎✎ When using the mic on the remote, hold the remote within 15 cm (6 inches) of your mouth. When using the remote functions. ✎✎ The voice recognition may fail if you speak too fast or too slowly. ✎✎ The recognition rate may vary depending on the user's characteristics (voice, pronunciation, intonation, and speed) and the environment (noise and TV volume).
HOME ➾ Internet (Web browser) You can type in a URL manually on TV or visit web sites in the Favorites list. Type in Web addresses here. Open a new tab. Add the current page to favorites. Moves to a previously visited website.
✎✎ The Internet (Web browser) supports up to Flash 10 but does not support platform-dependent technology like ActiveX. ✎✎ The Internet (Web browser) only works with pre-installed plug-ins. ✎✎ The Internet (Web browser) only replays the following media file formats: JPEG / PNG / GIF / WMV (ASF) / WMA / MP3 / MP4 ✎✎ The Internet (Web browser) is forcibly closed when memory is insufficient.
HOME ➾ Social Center LG Smart TV provides the Social Center app that allows you to communicate via social network services (SNS) such as Facebook and Twitter while watching TV. Using Social Center, you can communicate with friends while watching TV and view comments and pictures posted by your social networking friends at a glance. You can edit the Social Center tab. Social Center Select a tap such as Facebook / Twitter / Activity / Talk to communicate via social network services (SNS).
1 You can sign in with your LG TV account. If you are not a member yet, please sign up first. 2 Select a tab from Facebook, Twitter, Activity or Talk. Some functions are connected with other SNS, so you may need the SNS account to sign into the service. 3 Now, you can view content and post comments while watching TV. Social Center allows you to write comments while using LG Smart TV services connected with Facebook or Twitter and to view the comments on the Web or mobile device.
Facebook / Twitter Activity Talk Connected with smartphone You can communicate via SNS such as Facebook and Twitter while watching TV. With your Facebook account, you can easily see LG Smart TV’s great content recommended by other users. Click a recommended program/show to move to the corresponding 3D World, K-pop, or LG app. You can see what other twitter users think about the shows currently on.
✎✎ You can easily type using the LG Social Center app on your smartphone when communicating via SNS. The app can be downloaded at the Google Play Store. ✎✎ The functions of Social Center are subject to change according to TV software update.
Sign up is required to use LG Smart World. Free apps are available immediately after signing up, but you need to register your payment method in order to use paid apps. You can sign up and register payment methods on the TV or on our website (www.lgappstv.com). Problem When entering menu, the "Initializing" message always appears.
Problem While using internet features, there is space that does not appear in some web sites. Solution • The internet of the TV supports up to Flash 10 and may not replay any file format other than the following : JPEG, PNG, GIF, WMV (ASF), WMA, MP3, MP4 Internet (Web Browser) • If memory is insufficient because of large volume of image closes automatically when information in the web page, internet may be forced to visiting website. close. I already signed up on TV.
Problem Can each family member use a different ID with a single TV? Solution • It is possible to register and use more than one ID on one TV. • To check the ID registered with TV from HOME ➾ Settings ➙ OPTION ➙ Smart TV Setting ➙ ID List. • You can check the list of apps purchased by each ID. However, you can see all apps installed by each ID in My Apps. • After signing up on a PC, use “Forgot ID?” feature on web What should I do if I forget site (www.lgappstv.com) when needed.
Problem Solution I purchased an app from website (www.lgappstv. com). How can I use it on TV? • To check purchased apps on TV, sign in and view on the Purchased Apps menu. Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. Can I see history of my purchased apps? • Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. • Sign in to website (www.lgappstv.com) and then select My Page ➙ Purchase History.
Problem Solution I deleted a paid app, then do I have to purchase again to download it? • If a purchased app is accidentally deleted, you can download and reinstall it without having to buy it again, as long as it is still in service. Select the ID at the top of Home and re-download apps in My Page ➙ Purchased Apps. (Previously owned apps may not be re-downloaded or run depending on the software version.
Problem Solution How can I check the ID currently signed in to TV? • Select the ID at the top of Home and check the currently signed-in ID in My Page ➙ My Information. I installed an app on TV. Where can I check the installed app? • Select HOME ➾ My Apps. All paid and free apps installed on TV are displayed. There is a difference between the app size shown in the screen and the actual app size installed on TV.
Problem I forgot password on TV. What should I do? Solution • If you only provide the ID and password when signing up on your TV, you cannot recover your password when it is lost. Create a new ID and sign up with the ID. • If you provide other information than the ID and password when signing up on your TV or the LG website (www. lgappstv.com), you can recover your password on the website.
Problem Solution Do I have to save the payment information to purchase paid apps? • To purchase paid apps, you should have a credit card registered on with LG Smart World website (www.lgappstv. com) or have an account credit. If you do not want your credit card details to be saved, you may add a credit to your account before buying an app. credit in advance.
Problem Solution I signed up on my TV, but I cannot purchase paid apps. • To purchase paid apps, you need to have a credit card registered with the website (www.lgappstv.com). Also, you can have your credit ready by charging it on the website to purchase them. You cannot purchase paid apps if your credit card details are not registered with us or you don’t have enough credit.
Problem Solution Do I need to change my ID format to the email address? • For new sign-up members, the ID format has changed from a combination of numbers and letters to using an email address. • If you are already a member, you can still use your existing ID or change it to an email address. What is the LG account? • The LG account allows you to sign into all of the LG Smart services with a single ID and password.
Download the LG Magic Remote app from the Google Play Store or Apple App Store to watch TV with your smartphone. • Now you can enjoy your favorite TV shows on your smartphone. (Some models only) • Add your favorite channels on your smartphone. • You can use the functions such as PREMIUM, MY APPS directly on your smartphone. • The text input function is supported, so you can enter text easily. (Text cannot be entered on some screens.
❐❐To use a USB wired/wireless mouse Connect your mouse to a USB port on the TV. Use the mouse to move the pointer on the TV screen and select the menu you want. Mouse Left Button Wheel Button Magic Remote Control OK Button on Magic Remote Control Wheel Button on Magic Remote Control ✎✎ The right mouse button and any special buttons will not work with the TV. ✎✎ The usability of a wireless USB mouse and keyboard may be affected by Radio Frequency environment and the distance.
❐❐To use a USB wired/wireless keyboard Connect your keyboard to a USB port on the TV. You can enter text with the keyboard when using the search function and the Web browser. ✎✎ Text cannot be entered on some screens. ✎✎ It is recommended to use a product which is tested for compatibility with LG TV.
❐❐To use a gamepad Connect your gamepad to the USB port on the TV if the game requires a gamepad. ✎✎ It is recommended to use an authorized gamepad which is tested for compatibility with LG TV.
❐❐Set-Top Box Control If you have a Magic Remote, you can use it to control your Set-Top Box tuner (cable box, satellite box, or IPTV box). Before set up, make sure that the set-top box is connected to your TV. Set the set-top box following the instructions on the screen. ✎✎ If no instructions are displayed, set in MY APPS ➾ INPUT ➙ Set the set-top box manipulation.
❐❐To reset/disconnect the set-top box MY APPS ➾ INPUT ➙ Set the set-top box manipulation ➙ Resetting/ Disconnect Resetting Disconnect Deletes the set-top box settings and restarts the setup wizard. If you no longer wish to use this feature, click disconnect.
❐❐To control a set-top box with the Magic Remote Control Select the external input connected to the set-top box. You can use the direction, OK, and channel buttons on the Magic Remote Control. ou can use various function buttons of the set-top box by pressing MY APPS Y button on the Magic Remote Control. ✎✎ Some buttons may not work depending on the set-top box model. Use Magic remote control’s Navigation button.
❐❐Supported Set-top Box Brands • Cable: Evolution, General Instrument, Hamlin, Hitachi, Homecast, Kaon, Motorola, Moxi, Pace Micro, Panasonic, Pioneer, Samsung, Scientific Atlanta (CISCO), Sky, Sony, Telnet, Tivo, Tocom, Zenith • IPTV: ADB, Amino, Entone, Minerva, Motorola, Myrio, Pace, Scientific Atlanta (Cisco), Tivo, Wegener • Satellite: DirecTV, Dish Network (Echostar), Shaw Direct ✎✎ Some set-top box models may not work properly.
❐❐What is Motion Recognition? If you've installed the LG video call camera on the TV, you can control the TV simply by gesturing for the camera. You can use the Motion Recognition function to turn the TV off, change the channel and control the volume.
❐❐To use the Motion Recognition function 1 Install the LG video call camera (AN-VC400, sold separately) on the TV. 2 Go to HOME ➾ Settings ➙ OPTION and check if Motion Recognition is set to On. 3 With the TV on, face towards the camera and hold your hand up close to your face. The motion recognition controller appears on the TV screen. (You can check the motion recognition range of the camera in HOME ➾ Settings ➙ OPTION ➙ Camera Setting Help.
✎✎ The Motion Recognition feature may not working properly if: - The room is either too bright or too dark. - There is a bright light behind you. - You are wearing a hat. - You are too far away or too close to the camera (Ideal distance: 1.5 m - 4.5 m). - Your fingers cannot be detected by the camera because you are wearing gloves or a bandage.
✎✎ A gesture may not be recognized in the following cases. - If Motion Recognition is set to Off in HOME ➾ Settings ➙ OPTION, : Set it to On. - If any other menu than the motion recognition controller is displayed on the TV screen, : Close the menu to continue. - If you are watching TV using a set-top box, : Select TV in the INPUT menu.
✎✎ If more than one hand is detected by the camera, it works with the first detected hand only. To use another hand to operate the controller, lower your hand down to clear the controller from the screen and then raise your hand up again. ✎✎ If you hold your hand up with it spread out or gripped, the camera may not detect your hand. Make sure you raise your hand to show all five fingers. ✎✎ Be careful not to move your hand too fast or make too wide of a motion. This may cause the camera to malfunction.
HOME ➾ Settings ➙ SUPPORT ➙ Software Update Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Software Update Check Update Version Set it to On. When an update file is detected, the file is automatically downloaded. When the file download is complete, the software update window appears. Checks the version installed and when an update is available, the download process can be performed manually.
✎✎ The latest version can be obtained via digital broadcast signals or internet connections. ✎✎ Changing the channel while downloading the software via digital broadcast signal interrupts the download process. Returning to the initial channel allows downloading to resume. ✎✎ If software is not updated, certain functions may not work properly.
If the following symptoms occur, please recheck the system. It may not be a failure. ❐❐General Problem Cannot view certain channels. Solution • Adjust the location or orientation of the antenna. • Save the desired channels on Auto Tuning or Channel Edit. After turning on the TV, • It is not a problem because this process was intended to there is a delay before clean up the image noises that may occur when turning on full images appear. the TV.
❐❐Pictures HOME ➾ Settings ➙ SUPPORT ➙ Picture Test Check if the image signal output is normal by beginning with Picture Test. If there is no problem with the test image, check external device connections or broadcast signals. Problem Images from previous channel or other channels linger or the screen shows annoying lines. Solution • Try adjusting the antenna to the direction of the TV station or refer to the manual for proper way to connect the antenna.
Problem Solution Vibrating horizontal/vertical lines and fishnet patterns appear momentarily. • Such a problem may happen when there is strong electronic interference. Turn off other electronic devices such as mobile phones, power tools and other small electrical appliances. The screen display freezes or does not work properly in digital broadcast. • It may happen when the signals are weak or the reception unstable. Adjust the antenna’s orientation or cable connections.
Problem Solution Image is not on or not clear when connected to HDMI. • Check the HDMIⓇ cable specifications. Use only HDMIⓇ cable. Other cables may cause images to fade in and out or not be displayed properly. • Verify that all cable connections are securely connected. When connections are not secure, images may not be properly displayed. Does not work when USB storage device is connected. • Verify that the USB device and cable is version 2.0 or higher.
❐❐Sound HOME ➾ Settings ➙ SUPPORT ➙ Sound Test Try Sound Test first to verify that sound signal output is normal. When the test sound is normal, check external device connections or broadcast signals. Problem Solution Screen display is on but no sound. • Check other TV channels. • Make sure the TV Speaker is set to On. For analog broadcast, stereo is not clear or sound comes from one speaker only.
Problem Solution TV sound is not in sync with the lips or the sound breaks up occasionally. • If it happens on a certain TV channel, it may be caused by problems with an individual station’s broadcast signal. Check with the TV station or local cable operator. Whenever changing the channel, the volume is different. • Depending on the channel, there can be differences in volume. • Please set Auto Volume to On.
Problem Solution On certain channels, sound does not come out or only the background music plays. (If it is a program created for overseas) • On Language, set Language ➙ Audio Language as the desired language. Even if the language on Multi Audio is changed, once the power is turned off or the channel is changed, the default settings will be reset. There is no sound when connected to HDMI/USB. • Verify that the HDMIⓇ cable is high speed. • Check if the USB device and cable is version 2.0 or higher.
❐❐PC connection problem Problem Solution The screen display is not on after connecting to the computer. • Verify that the computer and the TV are securely connected. • Turn the TV off and back on using the remote control. • Restart the PC with the TV on. • Check if the resolution is correctly set for PC input. • To use the TV as a secondary monitor, check if the connected desktop or laptop supports dual monitor displays. • Reconnect the RGB/HDMI cable.
Problem When connected to the computer, the display is partially cut off or shifts to one side. Solution • Set up the resolution supporting PC input. (If it does not work, please reboot the computer.) • Select Screen (RGB-PC) and adjust Position/Size/Phase.
❐❐Trouble with replaying movies in My Media. Problem Solution Files on the Movie List are not displayed. • Check if the file on the USB storage device can be read on a computer. • Check that the file extension is supported. "This file is invalid." The above error message appears or the image display is not normal even though the sound is okay. • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the resolution is supported by the computer.
Problem Solution • Verify that the file replays normally on the video player in "Unsupported Audio." the computer. (Check for damaged files.) The above error message • Check that the audio codec is supported by the appears or the sound is not computer. normal even though the • Verify that the bit rate is supported. image display is okay. • Verify that the sample rate is supported.
Problem Subtitle is not displayed. Solution • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the video file shares the same name with the subtitle file. • Verify that the video and subtitle files are placed in the same folder. • Verify that the subtitle file format is supported. • Verify that the subtitle language is supported. (Open the subtitle files in Notepad to check for the language.) ✎✎ Image shown may differ from your TV.
❐❐Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
❐❐Indoor use only FCC Caution: for indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. Specially, within the 5.15-5.25 GHz band, U-NII device is restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations. ❐❐FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
❐❐COFETEL(Para México) La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
❐❐Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1 this device may not cause interference and 2 this device must accept any interference, including interference that may cause undesired operation of the device ❐❐Avis d’Industrie Canada Cet appareil est conforme à la norme CNR-210 des règlements d’Industrie Canada.
❐❐IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
❐❐Avis d’Industrie Canada sur l’exposition aux rayonnements Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contrôlé. REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES INTERFÉRENCES RADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NON AUTORISÉES APPORTÉES À CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT ANNULER L’AUTORISATION ACCORDÉE À L’UTILISATEUR DE FAIRE FONCTIONNER L’APPAREIL.
❐❐Information for recycling (take-back offer) This product may contain parts which could be hazardous to the environment. It is important that this product be recycled after use. LGE handles all waste products through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method.
❐❐On Disposal (Only, LCD TV with Hg lamp) • The fluorescent lamp used in this product contains a small amount of mercury. • Do not dispose of this product with general household waste. • Disposal of this product must be carried out in accordance to the regulations of your local authority. ❐❐Mise au rebut (téléviseurs ACL avec lampe au mercure seulement) • La lampe fluorescente utilisée dans ce produit contient une petite quantité de mercure. • Ne jetez pas ce produit avec les ordures ménagères.
❐❐DISPOSICIÓN (Sólo lámpara de Hg utilizada en TV LCD) • La lámpara fluorescente usada en este producto contiene una cantidad mínima de mercurio. • No disponga este producto junto con la basura normal de la casa. • La disposición de este producto debe ser manejado de acuerdo a los reglamentos de la autoridad local.