Printing specification Drawn Checked Approved Signature Sungho. Jo Mira.Woo JongOk.Kim MMM/DD/YYYY Feb/03/2014 Feb/03/2014 Feb/03/2014 1. Model Description Model name : 50PB660V-ZD Brand name : LG Part number 2nd, 3rd Suffix : EK Product name : 50PB660V-ZD (Revision number) : MFL68026906 (1402-REV00) 2. Printing Specification 1.
Pagination sheet Part number : MFL68026906 Total pages : 36 pages Front Back (ENG) Cover P/No.
OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PB66** PB69** *MFL68026906* P/NO : MFL68026906 (1402-REV00) Printed in Korea www.lg.
2 LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG LICENSEs Supported licenses may differ by model. For more information about licenses, visit www.lg.com. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
4 SAFETY INSTRUCTIONS ENGLISH ENG yy Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock. yy When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard. yy Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.
SAFETY INSTRUCTIONS yy Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. yy Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. yy Never touch the wall outlet when there is leakage of gas, open the windows and ventilate. It may cause a fire or a burn by a spark. yy Do not disassemble, repair or modify the product at your own discretion.
6 SAFETY INSTRUCTIONS ENGLISH ENG CAUTION yy Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. yy Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
SAFETY INSTRUCTIONS yy Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. yy When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. yy Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet.
8 SAFETY INSTRUCTIONS ENGLISH ENG yy Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. yy When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth.
SAFETY INSTRUCTIONS yy Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
10 SAFETY INSTRUCTIONS ENGLISH ENG Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS 11 Viewing Environment yy Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. yy Viewing Position - Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you may not be able to view 3D contents properly. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
12 ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING ENGLISH ENG ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 0 FLASHBK LIST MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.
14 ASSEMBLING AND PREPARING NOTE ENGLISH ENG yy The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core - If there are five ferrite cores, follow as shown in Figures 1 and 3. - If there are six ferrite cores, follow as shown in Figures 1, 2 and 3. 1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
ASSEMBLING AND PREPARING ENGLISH ENG Separate purchase Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models.
16 ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons Screen Speakers Power Indicator Remote Control Sensor Joystick Button (* This button is located below the screen of TV.) NOTE yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING 17 Using the joystick button Basic Functions Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it. (However, if the Menu button is on the screen, pressing and holding the joystick button will let you exit the Menu.
18 ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Image shown may differ from your TV. Attaching the stand 1 19 2 Before assembling, attach the stand sticker under the stand body to reduce the electromagnetic interference as shown below. (Depending on model) 3 EA M5 x L25 CAUTION yy Tighten the screw fully, otherwise the set may lean or fall.
20 ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table Securing the TV to a wall 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. (This feature is not available for all models.) 10 cm 10 cm m 10 c 10 cm 2 Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING CAUTION Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
22 MAKING CONNECTIONS ENGLISH ENG MAKING CONNECTIONS Antenna Connection This section on MAKING CONNECTIONS mainly uses diagrams for the PB69** models. Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS Euro Scart Connection AV 1 IN / OUT (Only satellite models) LNB IN Satellite 13/18 V 700mA Max Satellite Dish (*Not Provided) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (*Not Provided) AUDIO / VIDEO Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown.
MAKING CONNECTIONS Other Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable as shown. Some separate cable is not provided.
MAKING CONNECTIONS 25 USB(HDD) IN 1 USB IN 2 USB IN 3 ENGLISH ENG IN 3(MHL) HDD USB / USB Hub MHL passive Cable Mobile phone
26 REMOTE CONTROL This item is not included for all models. The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE FUNCTIONS 27 ENGLISH ENG MAGIC REMOTE FUNCTIONS This item is not included for all models. When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. and To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
28 MAGIC REMOTE FUNCTIONS ENGLISH ENG Voice recognition Network connection is required to use the voice recognition function. 1. Press the Voice recognition button. 2. Speak when the voice display window appears on the left of the TV screen. • The voice recognition may fail when you speak too fast or too slow. • Use the Magic remote control no further than 10 cm from your face.
MAGIC REMOTE FUNCTIONS yy Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. yy A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic Remote.
30 USING THE USER GUIDE / MAINTENANCE ENGLISH ENG USING THE USER GUIDE MAINTENANCE 1 Press the SMART button to access the Smart Home menu. 2 Select SETTINGS ➡ SUPPORT. Cleaning your TV 3 Select User Guide and press Wheel(OK). SUPPORT Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first.
TROUBLESHOOTING / SPECIFICATIONS 31 Problem Solution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed to , to ). ( No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet.
32 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 50PB66** MODELS Dimensions (W x H x D) Weight Weight 50PB6600-ZA 60PB6600-ZA 50PB660V-ZA 60PB660V-ZA 50PB660V-ZD 60PB660V-ZD 50PB6609-ZD 60PB6609-ZD With stand (mm) 1172 x 756.7 x 315 1390.8 x 880.9 x 340 Without stand (mm) 1172 x 700.9 x 56 1390.8 x 823.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.