LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS 3 7 L F 6* 3 7 L Y 9* 4 2 L F 6* 4 2 L Y 9* 4 7 L F 6* 4 7 L Y 9* 5 2 L F 6* 5 2 L Y 9* 37LF7* 42LF7* PLASMA TV MODELS 5 0 P F 9* 6 0 P F 9* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. ACCESSORIES Owner's Manual Owner’s manual Power Cord Owner’s Manual Batteries D/ A IN PU D/A T PO W ER TV TV/RA INPU DIO T GU IDE DV INFO SL I/II IN PU T D i EE BA CK UR E TE IT SIZ CK Q.
CONTENTS ACCESSORIES ............................................. 1 CONTENTS PREPARATION Front Panel Controls....................................................... 4 Back Panel Information .................................................. 7 Stand installation............................................................. 10 ATTACHING THE TV TO A DESK................................10 Attaching the TV to a wall ............................................ 11 Back Cover for Wire Arrangement .............
SOUND & LANGUAGE CONTROL Teletext within Digital Service . . . . . . . . . . . . . . . 92 Teletext in Digital Service . . . . . . . . . . . . . . . . . . 92 APPENDIX CONTENTS Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . 74 Preset Sound Settings - Sound Mode . . . . . . . . . 75 Sound Setting Adjustment - User Mode . . . . . . . . . 76 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . .
PREPARATION FRONT PANEL CONTROLS A A This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. Plasma TV Models: 50PF9*, 60PF9* PREPARATION Remote Control Sensor INPUT INPUT MENU MENU OK VOL PR VOL OK PR OK Button Power/Standby Indicator • illuminates red in standby mode.
LCD TV Models: 37LF6*, 42LF6*, 47LF6*, 52LF6* PROGRAMME Buttons VOL VOLUME Buttons OK Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor OK Button MENU MENU Button INPUT INPUT Button /I PREPARATION PR POWER Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
PREPARATION LCD TV Models: 37LY9*, 42LY9*, 47LY9*, 52LY9* PREPARATION PR PROGRAMME Buttons VOL VOLUME Buttons OK Button OK MENU Button MENU INPUT Button INPUT POWER Button Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
BACK PANEL INFORMATION A This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. Plasma TV Models AV V IN 3 S-VIDEO AV IN 3 VIDEO L/MONO AUDIO R S-VIDEO L/MONO MONO AUDIO R VIDEO L/ Audio/Video Input Connect audio/video output from an external device to these jacks. PREPARATION S-Video Input Connect S-Video out from an S-VIDEO device.
PREPARATION VIDEO L/MONO AUDIO R S-VIDEO LCD TV Models (Except 37/42LF7*) AV 3 1 2 EJECT RGB IN HDMI IN 2 ANTENNA IN OPTICAL RGB(PC) AV 1 AUDIO IN (RGB/DVI) AV 2 S-VIDEO COMPONENT IN VIDEO L/MONO AUDIO R HDMI/DVI IN 1 DIGITAL AUDIO OUT PREPARATION PCMCIA CARD SLOT 3 AUDIO VIDEO RS-232C IN (CONTROL & SERVICE) 9 AV IN 3 5 6 1 VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R S-VIDEO S-VIDEO AV IN 3 ANTENNA IN 2 PCMCIA CARD SLOT S-Video Input Connect S-Video out from an SVIDEO devic
VIDEO L/MONO AUDIO R USB IN S-Video Input S-VIDEO Connect S-Video out from an SVIDEO device. L/MONO AUDIO R Audio/Video Input Connect audio/video output from an external device to these jacks.
PREPARATION STAND INSTALLATION (Only 37 inch LCD TV Models) PREPARATION 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided.
ATTACHING THE TV TO A WALL This feature is not available for all models. A Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT Plasma TV models PREPARATION 1 Hold the CABLE MANAGEMENT with both hands and pull it as shown. 45° CABLE MANAGEMENT 12 2 Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. 3 Reinstall the CABLE MANAGEMENT as shown.
LCD TV models (Except 37/42LF7*) PREPARATION 1 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. 2 Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT 3 Bundle the cables using the supplied twister holder. (This feature is not available for all models.) How to remove the cable management Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.
PREPARATION LCD TV model (Only 37/42LF7*) PREPARATION 1 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. 2 Install the C A B L E M A N A G E M E N T as shown. (Insert it as pushing the loops on the both sides of the cable management.) CABLE MANAGEMENT 3 Bundle the cables using the supplied twist holder. (This feature is not available for all models.
■ ■ The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING Power Supply Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
PREPARATION ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP ■ This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.However,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below.
PCMCIA CARD SLOT EJECT HDMI/DVI IN 1 HDMI IN 2 ANTENNA IN 2 PCMCIA CARD SLOT RGB IN AV 1 Connect the digital set-top box to H D M I / D V I I N 1 or H D M I I N 2 jack on the set. EJECT HDMI/DVI IN 1 ANTENNA IN OPTICAL EXTERNAL EQUIPMENT SETUP Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
When connecting with a HDMI to DVI cable Except 37/42LF7* HDMI/DVI IN 1 AV 1 HDMI IN 2 1 TENNA IN 2 AV 2 PCMCIA CARD SLOT EJECT ECT HDMI/DVI IN 1 Connect the digital set-top box to H D M I / D V I I N 1 jack on the set. ANTENNA ENNA IN I IN 1 HDMI IN 2 3 4 Select HDMI1 input source with using the I N P U T AV 1 AV 2 button on the remote control.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD. 1 4 Select COMPONENT input source with using the I N P U T button on the remote control. 5 Refer to the DVD player's manual PCMCIAfor operating EJECT CARD SLOT HDMI/DVI IN 1 instructions.
ANTENNA IN VIDEO AUDIO RS-232C IN When connecting with a Euro Scart PCMCIA CARD SLOT EJECT 1 1 HDMI IN 2A V 1 Connect the Euro scart socketHDMI/DVI of theINDVD to the Euro scart socket on the set. 2 Turn on the DVD player,ANTENNA insert a DVD. 3 Select AV1 input source with using the I N P U T button on the remote control. RS-232C IN If connected to AV2 Euro scart socket, select AV2 input source.
AV IN 3 EXTERNAL EQUIPMENT SETUP AV 1 HDMI IN 2 AV 2 PCMCIA CARD SLOT EJECT HDMI/DVI IN 1 When connecting HDMI cable AUDIO VIDEO Except 37/42LF7* ANTENNA IN OPTICAL RS-232C IN 1 Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set. EXTERNAL EQUIPMENT SETUP 2 Select HDMI1or HDMI2 input source with using the I N P U T button on the remote control. 3 Refer to the DVD player's manual for operating instructions.
■ ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Typically a frozenPCMCIA still pictureEJECT from a VCR. If the 4:3 picture format is used; the fixed images on the sides of SLOT the screen may CARD remain visible on the screen.
EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart PCMCIA CARD SLOT VI IN 1 1 HDMI IN 2 EJECT HDMI/DVI IN 1 HDMI IN 2 Connect the Euro scart socket of the VCR to the A V 1 Euro scart AV socket on 2the set. 1 AV RGB IN B(PC) AUDIO IN (RGB/DVI) AV V1 AV V2 MPONENT IN ANTENNA 2 IN VCR and press PLAY on Insert a video tape into the VIDEO the VCR. (Refer to the VCR owner’s manual.) 3 RS-232C I NINP U T button Select AV1 input source with using the on the remote control.
AV 1 HDMI IN 2 AV 2 When connecting with an S-Video cable S-VIDEO VIDEO L ANT IN R AUDIO 1 IN Connect the S-VIDEO output of the VCR to the S V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the A U D I O input jacks on the set. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set EXTERNAL EQUIPMENT SETUP 26 L/MONO MONO AUDIO R S-VIDEO VIDEO L/ VIDEO L R 1 AV V IN 3 1 V I D E O jacks between TV and external equipment. Match the jack colors. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV3 input source with using the I N P U T button on the remote control. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable PCMCIA CARD SLOT Connect the RGB output of the PC to the R G B ( P C) jack on the set. ANTENNA RS-232C IN 2 1 4 Select RGB input source with using the I N P U T button on the remote control. AV 2 AUDIO VIDEO AUDIO VIDEO RS-232C IN SERVICE) Turn on the PC and the set.
EXTERNAL EQUIPMENT SETUP ! NOTE G To EXTERNAL EQUIPMENT SETUP 28 enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly.
Supported Display Resolution RGB[PC] / HDMI[PC] mode Resolution 720x400 640x480 832x624 1024x768 1280x768 1360x768 1366x768 1280x1024 1400x1050 1600x1200 1920x1080 31.468 31.469 37.500 37.879 46.875 49.725 48.363 56.476 60.023 47.693 47.649 47.649 63.595 65.160 74.077 66.647 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.03 59.99 59.94 59.94 60.00 60.00 60.00 59.99 Resolution 640x480 720x480 720x576 1280x720 1920x1080i 1920x1080p Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.469 31.469 31.
EXTERNAL EQUIPMENT SETUP GUIDE INFO i SLEEP Screen Setup for PC mode I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK Auto Configure (RGB [PC] mode only) MENU TEXT EXIT INFO i MENU EXIT OK GUIDE OK Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. FAV VOL VOL Q.
GUIDE INFO i SLEEP I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK Adjustment for screen Phase, Clock, Position MENU TEXT EXIT MENU INFO i EXIT OK GUIDE OK If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. FAV VOL It’s not available to use this function in 1:1 Pixel mode. VOL Q.VIEW PR PR MUTE MUTE 2 3 This function works in the following mode : RGB[PC]. SETUPO Auto Config.
EXTERNAL EQUIPMENT SETUP GUIDE INFO i SLEEP Selecting Wide XGA mode I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU To see a normal picture, match the resolution of RGB mode and selection of XGA mode. TEXT EXIT INFO i MENU EXIT OK GUIDE OK This function works in the following mode: RGB[PC] mode FAV VOL VOL Q.VIEW MUTE MUTE 1 EXTERNAL EQUIPMENT SETUP 1 Press the MENU button and then use D or E button to select the SCREEN menu.
GUIDE INFO i SLEEP Initializing (Reset to original factory settings) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT OK GUIDE OK This function operates in current mode. To initialize the adjusted value It’s not available to use ISM Method and Low power in L C D T V models. FAV VOL VOL Q.VIEW MUTE MUTE 1 Press the MENU button and then select the OPTION menu. 2 Press the G button and then Factory Mode.
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS (Only 37/42/47/52LY9*, 50/60PF9*) When using the remote control, aim it at the remote control sensor on the TV. D/A TV POWER INPUT DVD VCR POWER Switches the set on from standby or off to standby. INFO i GUIDE SUBTITLE BACK SLEEP RATIO PICTURE I/II TEXT MENU D/A Selects digital or analogue mode. Switches the set on from standby. TV/RAD INPUT External input mode rotate in regular sequence.
D/A TV POWER INPUT DVD VCR INFO i GUIDE RATIO PICTURE I/II SLEEP Sets the sleep timer. SUBTITLE BACK SLEEP See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. TV/RAD BACK Allow the user to move back one step in an interactive application, EPG or other user interaction function. IO SOUND TV/RADIO Selects Radio or TV channel in digital mode. 1 TEXT MENU EXIT RATIO Selects your desired picture format.
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS (Only 37/42/47/52LF6*, 37/42LF7*) When using the remote control, aim it at the remote control sensor on the TV. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD POWER Switches the set on from standby or off to standby. D/A INPUT Selects digital or analogue mode. Switches the set on from standby. BRIGHT VCR SIMPLINK TEXT RATIO TV/RADIO Selects Radio or TV channel in digital mode. I/II INPUT External input mode rotate in regular sequence.
INPUT D/A POWER TV/RADIO INPUT MODE Selects the remote operating modes. MODE TV See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. DVD BRIGHT VCR SIMPLINK TEXT RATIO I/II TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 1 RATIO Selects your desired picture format.
WATCHING TV /PROGRAMME CONTROL TURNING ON THE TV - If your TV will be turned on, you will be able to use its features. D/A WATCHING TV / PROGRAMME CONTROL 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. 2 In standby mode to turn TV on, press the r / I, INPUT or PR D or E button on the TV or press the POWER, INPUT, D/A, PR D or E (or PR + or -) or NUMBER button on the remote control and then the TV will switch on. TV DVD VCR PR Q.
PROGRAMME SELECTION 1 Press the P R D or E (or PR + or -) or NUMBER buttons to select a programme number. GUIDE INFO i SUBTITLE BACK SLEEP TV/RAD RATIO PICTURE I/II MENU TEXT IO SOUND EXIT OK 1 VOL PR Q.VIEW MUTE Press the VOL D or E (or VOL + or -) button to adjust the volume. 1 2 3 4 5 6 If you want to switch the sound off, press the MUTE button. VCR SIMPLINK TEXT RATIO I/II You can cancel this function by pressing the MUTE, VOL D or E (or VOL + or -), or I/II button.
WATCHING TV /PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then D or E button to display each menu. 2 Press the G button and then D or E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F or G button. You can move to the higher level menu by pressing the O K or M E N U button.
GUIDE INFO i SLEEP AUTO PROGRAMME TUNING (IN DIGITAL MODE) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT GUIDE OK OK Use it to automatically find and store all of the programmes. When you start auto programming in digital mode, all the stored service information will be deleted. FAV VOL VOL Q.VIEW PR PR MUTE MUTE 1 2 Press the G button and then D or E button to select Auto Tuning.
WATCHING TV /PROGRAMME CONTROL GUIDE INFO i SLEEP MANUAL PROGRAMME TUNING (IN DIGITAL MODE) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT GUIDE OK OK Manual Tuning lets you manually add a programme to your programme list. FAV VOL VOL Q.VIEW MUTE MUTE 1 WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Manual Tuning.
RATIO PICTURE I/II PROGRAMME EDIT (IN DIGITAL MODE) When a programme number is skipped, it means that you will be unable to select it using PR D or E (or PR + or -) button during TV viewing. MENU TEXT SOUND EXIT BACK MENU INFO i EXIT GUIDE OK OK FAV VOL Q.VIEW VOL PR PR MUTE If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes.
WATCHING TV /PROGRAMME CONTROL Mini Glossary Displayed when the DTV Programme. A TEXT Displayed when the Teletext Programme. Displayed when the Locked Programme. Displayed when the Subtitle Programme. Displayed when the Radio Programme. Displayed when the Scramble Programme. Displayed when the MHEG Programme. Displayed when the Dolby Programme. Skipping a programme number WATCHING TV / PROGRAMME CONTROL 1 Select a programme number to be skipped with the D or E or F or G button.
GUIDE INFO i SLEEP 5V ANTENNA POWER (IN DIGITAL MODE ONLY) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT OK GUIDE OK Even if there isn’t a special 5V adapter power in the external antenna, this function can output 5V in the set. FAV VOL VOL Q.VIEW MUTE MUTE 1 2 Press the G button and then use D or E button to select 5V Antenna Power. MENU Prev. 1 Press the G button and then use D or E button to select On or Off.
WATCHING TV /PROGRAMME CONTROL GUIDE INFO i SLEEP SOFTWARE UPDATE (IN DIGITAL MODE ONLY) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT OK GUIDE OK Software Update, means software can be downloaded through the digital terrestrial broadcasting system. FAV VOL 1 2 WATCHING TV / PROGRAMME CONTROL 3 VOL Press the MENU button and then select the SETUP menu. D or E button to Q.
GUIDE INFO i SLEEP DIAGNOSTICS (IN DIGITAL MODE ONLY) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT GUIDE OK OK This function enables you to watch Manufacturer, Model/Type, Serial Number and Software Version. It’s displayed the information and signal strength of the turned MUX. It’s displayed the signal information and service name of the selected MUX. Press the M E N U button and then D or E button to select the SETUP menu.
WATCHING TV /PROGRAMME CONTROL GUIDE INFO i SLEEP CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY) This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you can’t watch the pay services. When the module is inserted to CI slot, you can access the module menu. To purchase a module and smart card, contact your supplying dealer. Do not often insert or remove a CAM module from the set. It may cause a trouble.
RATIO PICTURE I/II AUTO PROGRAMME TUNING (IN ANALOGUE MODE) All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. TEXT MENU SOUND BACK EXIT MENU INFO i EXIT GUIDE OK OK FAV VOL VOL Q.VIEW PR PR MUTE MUTE SIZE Press the G button and then D or E button to select Auto Tuning. 3 Press the G button to select System.
WATCHING TV /PROGRAMME CONTROL RATIO PICTURE I/II MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) MENU TEXT SOUND BACK EXIT MENU INFO i EXIT GUIDE OK OK Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. FAV VOL VOL Q.VIEW PR PR MUTE MUTE 1 1 WATCHING TV / PROGRAMME CONTROL Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning.
GUIDE INFO i SLEEP FINE TUNING (IN ANALOGUE MODE) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU Normally fine tuning is only necessary if reception is poor. TEXT EXIT MENU INFO i EXIT GUIDE OK OK FAV 1 Press the MENU button and then D or E button to select the SETUP menu. VOL VOL Q.VIEW PR PR MUTE MUTE 1 2 3 Press the G button and then D or E button to select Manual Tuning. 3 Press the G button and then D or E button to select Fine.
WATCHING TV /PROGRAMME CONTROL GUIDE INFO i SLEEP PROGRAMME EDIT (IN ANALOGUE MODE) I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT OK INFO i GUIDE OK This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. FAV VOL VOL Q.
INFO i GUIDE SLEEP BACK SUBTITLE TV/RAD IO FAV VOL I/II RATIO PICTURE TEXT MENU Q.VIEW SOUND VOL PR BACK MENU EXIT EXIT 1 2 3 4 5 6 7 8 9 LIST 0 FAV SIZE UPDATE TIME REVEAL INDEX Q.VIEW PR MUTE GUIDE 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW POSITION INDEX TIME SLEEP HOLD REVEAL FAV HOLD i INFO i OK OK VOL PR MUTE VOL PR ? ? MUTE MUTE 1 A 2 3 SUBTITLE Moving a programme Select a programme to be moved with D or E or F or G button.
WATCHING TV /PROGRAMME CONTROL BACK MENU CALLING THE PROGRAMME TABLE You can check the programmes stored in the memory by displaying the programme table. TEXT EXIT OK WATCHING TV / PROGRAMME CONTROL 1 Press the LIST button to display the PROGRAMME LIST menu. The programme list appears on the screen. • You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode.
GUIDE INFO i SLEEP INPUT SOURCE SELECTION I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT GUIDE Sets a label to each input source which is not in use. OK OK FAV VOL VOL Q.VIEW MUTE MUTE 1 Press the M E N U button and then use D or E button to select the OPTION menu. 2 Press the G button and then use D or E button to select Input Label.
WATCHING TV /PROGRAMME CONTROL GUIDE INFO i SLEEP I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. TEXT EXIT MENU INFO i EXIT OK GUIDE OK FAV VOL VOL Q.VIEW PR PR MUTE MUTE 1 2 3 If you do not want SIMPLINK menu, select “Off”.
SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, OK, buttons. , , , , , and Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it. Power off all devices When you power off TV, all connected devices are turned off.
PICTURE CONTROL EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Button Function in NOW/NEXT Guide Mode Remote Control Buttons RED YELLOW BLUE F or G or E PR GUIDE/EXIT TV/RADIO INFO i D Function Change EPG mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Select TV or RADIO Programme The detail information on or off Button Function in 8 Days Guide Mode F or G or E PR GUIDE/EXIT TV/RADIO INFO i D Function Change EPG
PICTURE CONTROL Button Function in Extended Description Box Remote Control Buttons D or E YELLOW INFO i GUIDE/EXIT Function Text Up/Down Enter Timer Record/Remind setting mode The detail information on or off Switch off EPG PICTURE CONTROL Button Function in Record/Remind Setting Mode - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable.
GUIDE INFO i SLEEP PICTURE SIZE (ASPECT RATIO) CONTROL I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU EXIT OK INFO i GUIDE OK You can watch the screen in various picture formats; S p e c t a c l e (Except 37/42LF7*), F u l l, O r i g i n a l, 4 : 3, 1 6 : 9, 1 4 : 9, Z o o m 1 / 2 and 1 : 1 P i x e l (or J u s t S c a n(Only 37/42LF7*)). FAV VOL VOL Q.
PICTURE CONTROL • 16:9 Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). • Zoom2 Choose Zoom2 when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage. 16:9 PICTURE CONTROL • 14:9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode.
GUIDE INFO i SLEEP PRESET PICTURE SETTINGS I/II Picture Mode-Preset Standard Mild User 1/2 2 3 TV/RAD IO SOUND TEXT EXIT OK INFO i GUIDE OK FAV VOL VOL Q.VIEW PR PR MUTE MUTE 1 2 3 SETUPO Picture Mode PICTUREO Colour Temperature Press the MENU button and then D or E button to select the PICTURE menu. AUDIOO Advanced Picture Reset OPTIONO Demo SCREENO TIMEO Press the G button and then D or E button to select Picture Mode.
PICTURE CONTROL GUIDE INFO i SLEEP Auto Colour Tone Control (Warm/Medium/Cool) I/II RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU To initialize values (reset to default settings), select the Cool option. Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. BACK TEXT EXIT MENU EXIT OK INFO i GUIDE OK FAV VOL VOL Q.
GUIDE INFO i SLEEP MANUAL PICTURE ADJUSTMENT I/II Picture Mode-User option Brightness Colour Sharpness Tint SUBTITLE TV/RAD IO RATIO PICTURE SOUND BACK MENU Contrast BACK TEXT EXIT OK Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.
PICTURE CONTROL GUIDE INFO i SLEEP I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU Colour Tone - User option TEXT EXIT OK INFO i GUIDE OK To adjust red, green, blue to any colour temperature you prefer. FAV VOL VOL Q.VIEW PR PR MUTE MUTE 1 1 MENU EXIT 2 3 SETUPO Picture Mode PICTUREO Colour Temperature Press the M E N U button and then D or E button to select the PICTURE menu.
GUIDE INFO i SLEEP XD - PICTURE IMPROVEMENT TECHNOLOGY I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU GUIDE OK XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. INFO i EXIT OK FAV VOL It’s not available to use this function in PC[RGB/HDMI] mode. 1 VOL Q.
PICTURE CONTROL INFO i GUIDE SLEEP DEMO BACK RATIO PICTURE I/II SUBTITLE TV/RAD IO SOUND BACK MENU Use it to see the difference between XD Demo on and XD Demo off. It’s not available to use this function in RGB[PC], HDMI[PC] mode. TEXT EXIT MENU EXIT OK INFO i GUIDE OK FAV 1 SETUPO Picture Mode PICTUREO Colour Temperature Press the MENU button and then D or E button to select the PICTURE menu. 2 Press the MENU button and then D or E button to select XD Demo.
GUIDE INFO i SLEEP ADVANCED - CINEMA I/II RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU Set up the TV for the best picture appearance for viewing movies. This feature operates only in TV, AV, S-Video and Component 480i/576i, DTV mode. BACK TEXT EXIT INFO i MENU EXIT GUIDE OK OK FAV VOL 1 SETUPO Picture Mode PICTUREO Colour Temperature Press the M E N U button and then D or E button to select the PICTURE menu.
PICTURE CONTROL GUIDE INFO i SLEEP ADVANCED - BLACK(DARKNESS) LEVEL I/II RATIO PICTURE TEXT PICTURE CONTROL 2 TV/RAD IO SOUND EXIT INFO i MENU EXIT GUIDE OK OK FAV VOL VOL 1 SUBTITLE BACK MENU When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. This function works in the following mode: AV (NTSC-M), S-Video (NTSC-M) or HDMI. BACK Q.
GUIDE INFO i SLEEP PICTURE RESET I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced at the factory. TEXT EXIT MENU EXIT INFO i GUIDE OK OK FAV VOL VOL Q.VIEW MUTE MUTE 1 1 PR PR 2 3 SETUPO Picture Mode PICTUREO Colour Temperature Press the M E N U button and then D or E button to select the PICTURE menu.
PICTURE CONTROL GUIDE INFO i SLEEP IMAGE STICKING MINIMIZATION (ISM) METHOD I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT INFO i GUIDE OK A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. MENU EXIT OK FAV VOL VOL Q.
GUIDE INFO i SLEEP LOW-POWER PICTURE MODE I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU This is the function to reduce the power consumption of the set. TEXT EXIT MENU INFO i EXIT GUIDE OK OK It’s not available to use this function in LCD TV models. FAV VOL VOL Q.VIEW MUTE MUTE 1 Press the MENU button and then select the OPTION menu. 2 Press the G button and then D or E button to select Factory Mode. 3 Press the G button and then D or E button to select Low power.
SOUND & LANGUAGE CONTROL GUIDE INFO i SLEEP AUTO VOLUME LEVELER I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT OK GUIDE OK AVL automatically keeps on an equal volume level even if you change programmes. FAV VOL VOL Q.VIEW MUTE MUTE 1 SOUND & LANGUAGE CONTROL 74 1 Press the MENU button and then select the AUDIO menu. 2 Press the G button and then D or E button to select Auto Volume.
GUIDE INFO i SLEEP PRESET SOUND SETTINGSSOUND MODE I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT OK You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. MENU INFO i EXIT GUIDE OK FAV VOL Sound Mode lets you enjoy the best sound without any Special adjustment because the TV sets the appropriate sound options based on the programme content. VOL Q.
SOUND &LANGUAGE CONTROL GUIDE INFO i SLEEP SOUND SETTING ADJUSTMENT -USER MODE I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT OK GUIDE OK Adjust the sound equalizer. FAV VOL VOL Q.VIEW MUTE MUTE 1 1 Press the M E N U button and then D or select the AUDIO menu. E PR PR 2 3 button to 2 Press the G button and then D or Sound Mode. E button to select 3 Press the G button and then D or User. E button to select 4 Press the G button.
GUIDE INFO i SLEEP BALANCE I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU You can adjust the sound balance of speaker to the levels you prefer. TEXT EXIT MENU INFO i EXIT OK GUIDE OK FAV VOL VOL Q.VIEW MUTE MUTE 1 Press the MENU button and then select the AUDIO menu. 2 Press the G button and then Balance. D or E button to select 3 Press the G button and then desired adjustment.
SOUND &LANGUAGE CONTROL GUIDE INFO i SLEEP TV SPEAKERS ON/ OFF SETUP I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU INFO i EXIT OK GUIDE OK You can adjust the internal speaker status. In AV1, AV2, AV3, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, TV speaker can be outputted even though there is no video signal. FAV VOL VOL Q.VIEW MUTE MUTE 1 If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
GUIDE INFO i SLEEP SELECTING DIGITAL AUDIO OUT I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT OK This function lets you select your preferred Digital Audio Output. The set can output Dolby Digital in a channel only which broadcast Dolby Digital Audio. When it’s applied the Dolby Digital format, if you select Dolby Digital on Digital audio out menu, SPDIF Output will be outputted Dolby Digital.
SOUND &LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. SOUND & LANGUAGE CONTROL 80 Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the depth of sound is improved.
NICAM Reception (In Analogue Mode Only) If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
SOUND &LANGUAGE CONTROL SUBTITLE GUIDE SLEEP ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION RATIO PICTURE I/II MENU Installation guide menu appears on TV screen when it is turned on for the first time. 1 Press the D or E or F or G button and then, O K button to select your desired language. 2 Press the D or E button and then, O K button to select your country.
TV LANGUAGE SELECTION (IN DIGITAL MODE ONLY) GUIDE DVD INFO i SLEEP SUBTITLE TV/RAD BACK RATIO PICTURE I/II A u d i o function lets you select your preferred language for audio. If the audio data in selected language is not broadcasted, default language audio will be played. VCR MENU IO SOUND TEXT EXIT OK Use S u b t i t l e function when two or more subtitle languages are broadcasted.
TIME SETTING GUIDE INFO i SLEEP CLOCK SETUP I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU TEXT EXIT MENU EXIT OK GUIDE OK The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time function. FAV VOL VOL Q.VIEW PR PR MUTE MUTE 1 1 Press the MENU button and then select the TIME menu. 2 Press the G button and then D or E button to select Clock.
GUIDE INFO i SLEEP AUTO ON/OFF TIMER SETTING I/II 1 Press the MENU button and then select the TIME menu. 2 Press the G button and then Off time/On Time. D or E button to select 3 Press the On. D or E button to select G button and then D or E RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU The Off time automatically switches the set to standby at the preset time.
TIME SETTING GUIDE INFO i SLEEP AUTO SHUT-OFF SETTING I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU If set to on and there is no input signal, the set turns off automatically after 10 minutes. TEXT EXIT MENU EXIT OK INFO i GUIDE OK FAV VOL VOL Q.VIEW PR PR MUTE MUTE 1 1 Press the MENU button and then select the TIME menu. 2 Press the G button and then D or E button to select Auto Sleep. 3 Press the G button and then D or E button to select Off or On.
GUIDE INFO i SLEEP TIME ZONE SETUP I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK When you select a Time Zone city, TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) information which is received to broadcasting signal when time is set automatically by a digital signal. MENU TEXT EXIT MENU EXIT OK INFO i GUIDE OK FAV VOL 1 2 Press the MENU button and then select the TIME menu.
PARENTAL CONTROL / RATINGS SOUND I/II MENU TEXT BACK EXIT MENU INFO i EXIT SET PASSWORD & LOCK SYSTEM GUIDE OK OK If you first enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. FAV VOL VOL Q.VIEW PR PR MUTE MUTE PARENTAL CONTROL / RATING 88 Press the MENU button and then select the OPTION menu. 2 Press the G button and then D or E button to select Lock System. 3 Press the On.
SOUND I/II MENU TEXT PARENTAL CONTROL INPUT D/A EXIT TV/RADIO INPUT OK DVD BRIGHT VCR BACK This function operates according to information from the broadcasting station. Therefore if the signal has wrong information, this function dose not operates. MODE TV POWER MENU INFO i EXIT VOL Q.VIEW PR GUIDE OK MUTE Lets you set up blocking schemes to block specific channels, ratings, and external viewing sources.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK only. The set gives you access to a digital teletext which is greatly improved in various aspects such as text, graphics and so on. This digital teletext can be accessed by special digital teletext services and specific services which broadcast digital teletext. You should select off from the subtitle language to display teletext by pressing SUBTITLE button.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the product Press the VOL button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust Balance in menu option. A A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) with stand without stand with stand Weight without stand Power requirement MODELS Dimensions with stand (Width x Height x Depth) without stand with stand without stand Power requirement 47LF6* 52LF6* 37LF65-ZC 37LF66-ZE 42LF65-ZC 42LF66-ZE 47LF65-ZC 47LF66-ZE 52LF65-ZC 52LF66-ZE 927.0 x 692.8 x 280.5 mm 1033.1 x 750.0 x 300.0 mm 1144.5 x 825.6 x 331.0 mm 1032.7 x 750.0 x 287.6 mm 36.5 x 27.3 x 11.0 inches 40.7 x 29.
MODELS with stand Dimensions 50PF9* 60PF9* 50PF95-ZA 50PF96-ZB 60PF95-ZA 60PF96-ZB 1360 x 889 x 370 mm 53.5 x 35 x 14.5 inches 1613.6 x 1036.8 x 452.0 mm 63.5 x 40.9 x 17.8 inches 1360 x 822.5 x 95.5 mm 53.5 x 32.3 x 3.7 inches 1613.6 x 970.0 x 98.5 mm 63.5 x 38.2 x 3.9 inches 57.5 kg / 126.7 lbs 48.5kg / 106.9 lbs 81.0 kg / 178.6 lbs 65.0 kg / 143.3 lbs (Width x Height x Depth) without stand with stand Weight without stand Power requirement AC100-240V~ 50/60Hz 4.
APPENDIX PROGRAMMING THE REMOTE CONTROL (Only 37/42/47/52LY9*, 50/60PF9*) The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. 1 To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the corresponding mode button on the remote. After that, press the POWER button.
A VCRs Brand Codes Brand Codes Brand Codes Brand Codes AIWA AKAI 034 016 125 072 031 012 035 028 108 003 031 005 065 112 108 012 034 059 006 029 036 129 003 034 031 107 132 012 004 043 031 031 012 040 043 012 048 130 KENWOOD 014 047 001 101 034 003 017 040 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 013 063 031 031 067 101 013 PORTLAND PULSAR QUARTZ QUASAR RCA 108 072 011 033 013 040 107 145 003 031 053 058 148 014 032 105 113 125 022 003 102 01
APPENDIX PROGRAMMING THE REMOTE CONTROL (Only 37/42/47/52LF6*,37/42LF7*) The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 Test your remote control.
VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153 010 045 026 034 137 150 015
APPENDIX IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
Code (Hexa) PR (D) or PR + PR (E) or PR VOL (D) or VOL + VOL (E) or VOL Up (D) Down (E) Right (G) Left (F) POWER MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 INPUT INFO i GUIDE SUBTITLE EXIT FAV Q.
APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
GUIDE INFO i SLEEP Set ID I/II BACK RATIO PICTURE SUBTITLE TV/RAD IO SOUND BACK MENU Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p .109 TEXT EXIT MENU INFO i EXIT GUIDE OK OK FAV VOL VOL Q.VIEW MUTE MUTE 1 1 Press the M E N U button and then use D or E button to select the OPTION menu. 2 Press the G button and then use D or E button to select Factory Mode.
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Colour 10. Tint 11. Sharpness 12. OSD Select 13. Remote control lock mode 14.
01. Power (Command 2 : a) 04. Screen Mute (Command 2 : d) G To control Power On/Off of the set. G To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack [k][d][ ][Set ID][ ][Data][Cr] 1 : Power On Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) [a][ ][Set ID][ ][OK][Data][x] Ack G To show Power On/Off. [d][ ][Set ID][ ][OK][Data][x] Transmission 05.
APPENDIX 09. Colour (Command 2 : i) 14. Balance (Command 2 : t) G To adjust the screen colour. G To adjust balance. You can also adjust colour in the PICTURE menu. Transmission You can also adjust balance in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 109. Ack Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 109.
19. Abnormal State (Command 2 : z) G To recognize an abnormal state. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF : Read Ack 21. Low Power (Command 1 : j, Command 2 : q) G To reduce the power consumption of the set. You can also adjust Low Power in OPTION menu. It’s not available to use this function in LCD TV models.
APPENDIX 22. Auto Configure (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] 25. Input select (Command 1 : x, Command 2 : b) (Main Picture Input) G To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 23.